Subject: Re: Question about AlphaStation 200
To: Linc Fessenden <email@example.com>
From: Sean J. Schluntz <firstname.lastname@example.org>
Date: 12/12/2001 17:36:31
>Well, I have an AS200 4/233 here with the original manual if that
>helps.. The manual saysswitch from ARC to SRM by using the firmware
>Update Utility. There is a flashRom write enable jumper at J6 on the MB
>which should be factory set to write. Then you use the Firmware Update
>Utility which supposedly comes on cdrom to switch the firmware for
>you. Unfortunately I do not have the utility but it sounds to me like you
>just need to check that jumper :-)
Thanks for the info. So I'll open the case to check the jumper, and at the
same time I'll look for empty flash ram slots.
Thanks for the info guys!