Subject: Re: AS1200 with 53c875 symbios SCSI card, does not boot
To: Manuel Bouyer <bouyer@antioche.eu.org>
From: Michael Carlson <mcarlson@Legato.COM>
List: port-alpha
Date: 10/11/2001 13:59:43
--------------080505020802050401020103
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Manuel Bouyer wrote:
>On Tue, Oct 09, 2001 at 02:59:22PM -0700, Michael Carlson wrote:
>
>>Alright, I am going to type whats on the screen and maybe that will
>>provide more info (BTW is there a way to boot into verbose mode off of
>>the CD?) but first this is how its physically connected:
>>
>>___________________________________________
>>| ========= =========
>>| CDROM channelB to hard drive
>>
>>Dont know if this helps or not but there you have it. There is a DIP
>>switch package next to the 50pin scsi2 connector (thats where the CDROM
>>is) and they are all set to off. there is a 50pin scsi connector on the
>>mainboard and thats where the CDROM was originally connected but not
>>anymore (I thought it might help if I had the cdrom connected to
>>the53c875 controller, guess not)
>>
>
>You don't have 2 wide connectors on the adapter ?
>On mine there are 2 wide connectors and one narrow, if I remember properly.
>So there is one channel which has 3 connectors: internal wide, internal narrow
>and external wide. Of course you can't use them all at the same time, so
>if you have some external device you have to make sure on which connector
>it is.
>
Sorry, I do have 2 wide connectors and right behind the channel A
connector is a scsi2 connector, I mainly just wanted to illustrate that
I have the cdrom connected to the 53c875 card.
>
>>curently on the screen (i do not have a terminal or serial connection so
>>I typed this by hand from whats on the monitor):
>>
>>*pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok**
>>** pceb0 at pci2 dev 1 function 0: vendor 0x8086 product 0x0482 (rev.
>>0x15)**
>>** vga0 at pci2 dev 2 function 0: vendor 0x104c product 0x3d07 (rev. 0x01)**
>>** wsdisplay0 at vga0: console (80x25, vt100 emulation)**
>>** eisa0 at pceb0**
>>** isa0 at pceb0**
>>** com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo**
>>** com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo**
>>** pckbc0 at isa0 port 0x60-0x64**
>>** pckbc0 at pckbc0 (kbd slot)**
>>** pckbc0: using irq 1 for kbd slot**
>>** wskbd0 at pckbc0: console keyboard, using wsdisplay0**
>>** lpt0 at isa0 port 0x3bc-0x3bf irq 7**
>>** fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2**
>>** fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec**
>>** mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible**
>>** mcbus0 mid 2: CPU 4MB BCache**
>>** scsibus0: waiting 2 seconds for devices to settle...**
>>** scsibus1: waiting 2 seconds for devices to settle...**
>>** cd0 at scsibus1 target 5 lun 0: <DEC, RRD47 (C) DEC, 1206> SCSI2
>>5/cdrom removable**
>>** siop1: target 5 now synchronous at 10.Mhz, offset 16**
>>** scsibus2: waiting 2 seconds for devices to settle...**
>>** probe(siop2:0:0): command timeout**
>>*
>>And thats where is just sits there. Any suggestions as to what I can do?
>>
>
>Do you know if the on-board i810 is attached to scsibus0 or scsibus2 ?
>As you say there's nothing on the i810 I suspect your hard disks are on siop2.
>Do you have a device on target 0 on scsibus2 ?
>
I was sort of hoping someone else would know. I have looked on the
motherboard and I cannot find a 53c8210 chip, nor on the PCI card. I
would also assume that the hard drive is connected to the siop2 since
its on the second channel of the PCI card.
>
>--
>Manuel Bouyer <bouyer@antioche.eu.org>
>--
>
>
Thanks,
Mike C
--------------080505020802050401020103
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<html>
<head>
</head>
<body>
Manuel Bouyer wrote:<br>
<blockquote type="cite" cite="mid:20011011221809.B4279@antioche.eu.org">
<pre wrap="">On Tue, Oct 09, 2001 at 02:59:22PM -0700, Michael Carlson wrote:<br></pre>
<blockquote type="cite">
<pre wrap="">Alright, I am going to type whats on the screen and maybe that will <br>provide more info (BTW is there a way to boot into verbose mode off of <br>the CD?) but first this is how its physically connected:<br><br>___________________________________________<br>| ========= =========<br>| CDROM channelB to hard drive<br><br>Dont know if this helps or not but there you have it. There is a DIP <br>switch package next to the 50pin scsi2 connector (thats where the CDROM <br>is) and they are all set to off. there is a 50pin scsi connector on the <br>mainboard and thats where the CDROM was originally connected but not <br>anymore (I thought it might help if I had the cdrom connected to <br>the53c875 controller, guess not)<br></pre>
</blockquote>
<pre wrap=""><!----><br>You don't have 2 wide connectors on the adapter ?<br>On mine there are 2 wide connectors and one narrow, if I remember properly.<br>So there is one channel which has 3 connectors: internal wide, internal narrow<br>and external wide. Of course you can't use them all at the same time, so<br>if you have some external device you have to make sure on which connector<br>it is.<br></pre>
</blockquote>
<br>
Sorry, I do have 2 wide connectors and right behind the channel A connector
is a scsi2 connector, I mainly just wanted to illustrate that I have the
cdrom connected to the 53c875 card.<br>
<blockquote type="cite" cite="mid:20011011221809.B4279@antioche.eu.org">
<pre wrap=""><br></pre>
<blockquote type="cite">
<pre wrap="">curently on the screen (i do not have a terminal or serial connection so <br>I typed this by hand from whats on the monitor):<br><br>*pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok**<br>** pceb0 at pci2 dev 1 function 0: vendor 0x8086 product 0x0482 (rev. <br>0x15)**<br>** vga0 at pci2 dev 2 function 0: vendor 0x104c product 0x3d07 (rev. 0x01)**<br>** wsdisplay0 at vga0: console (80x25, vt100 emulation)**<br>** eisa0 at pceb0**<br>** isa0 at pceb0**<br>** com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo**<br>** com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo**<br>** pckbc0 at isa0 port 0x60-0x64**<br>** pckbc0 at pckbc0 (kbd slot)**<br>** pckbc0: using irq 1 for kbd slot**<br>** wskbd0 at pckbc0: console keyboard, using wsdisplay0**<br>** lpt0 at isa0 port 0x3bc-0x3bf irq 7**<br>** fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2**<br>** fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec**<br>** mcclock0 at isa0 port
0x70-0x71: mc146818 or compatible**<br>** mcbus0 mid 2: CPU 4MB BCache**<br>** scsibus0: waiting 2 seconds for devices to settle...**<br>** scsibus1: waiting 2 seconds for devices to settle...**<br>** cd0 at scsibus1 target 5 lun 0: <DEC, RRD47 (C) DEC, 1206> SCSI2 <br>5/cdrom removable**<br>** siop1: target 5 now synchronous at 10.Mhz, offset 16**<br>** scsibus2: waiting 2 seconds for devices to settle...**<br>** probe(siop2:0:0): command timeout**<br>*<br>And thats where is just sits there. Any suggestions as to what I can do?<br></pre>
</blockquote>
<pre wrap=""><!----><br>Do you know if the on-board i810 is attached to scsibus0 or scsibus2 ?<br>As you say there's nothing on the i810 I suspect your hard disks are on siop2.<br>Do you have a device on target 0 on scsibus2 ?<br></pre>
</blockquote>
I was sort of hoping someone else would know. I have looked on the motherboard
and I cannot find a 53c8210 chip, nor on the PCI card. I would also assume
that the hard drive is connected to the siop2 since its on the second channel
of the PCI card.<br>
<br>
<br>
<br>
<blockquote type="cite" cite="mid:20011011221809.B4279@antioche.eu.org">
<pre wrap=""><br>--<br>Manuel Bouyer <a class="moz-txt-link-rfc2396E" href="mailto:bouyer@antioche.eu.org"><bouyer@antioche.eu.org></a><br>--<br><br><br></pre>
</blockquote>
<br>
Thanks,<br>
<br>
Mike C<br>
</body>
</html>
--------------080505020802050401020103--