On Tue, Oct 09, 2001 at 02:59:22PM -0700, Michael Carlson wrote:
> Alright, I am going to type whats on the screen and maybe that will 
> provide more info (BTW is there a way to boot into verbose mode off of 
> the CD?) but first this is how its physically connected:
> 
> ___________________________________________
> |      =========       =========
> |        CDROM            channelB to hard drive
> 
> Dont know if this helps or not but there you have it. There is a DIP 
> switch package next to the 50pin scsi2 connector (thats where the CDROM 
> is) and they are all set to off. there is a 50pin scsi connector on the 
> mainboard and thats where the CDROM was originally connected but not 
> anymore (I thought it might help if I had the cdrom connected to 
> the53c875 controller, guess not)

You don't have 2 wide connectors on the adapter ?
On mine there are 2 wide connectors and one narrow, if I remember properly.
So there is one channel which has 3 connectors: internal wide, internal narrow
and external wide. Of course you can't use them all at the same time, so
if you have some external device you have to make sure on which connector
it is.

> 
> curently on the screen (i do not have a terminal or serial connection so 
> I typed this by hand from whats on the monitor):
> 
> *pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok**
> ** pceb0 at pci2 dev 1 function 0: vendor 0x8086 product 0x0482 (rev. 
> 0x15)**
> ** vga0 at pci2 dev 2 function 0: vendor 0x104c product 0x3d07 (rev. 0x01)**
> ** wsdisplay0 at vga0: console (80x25, vt100 emulation)**
> ** eisa0 at pceb0**
> ** isa0 at pceb0**
> ** com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo**
> ** com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo**
> ** pckbc0 at isa0 port 0x60-0x64**
> ** pckbc0 at pckbc0 (kbd slot)**
> ** pckbc0: using irq 1 for kbd slot**
> ** wskbd0 at pckbc0: console keyboard, using wsdisplay0**
> ** lpt0 at isa0 port 0x3bc-0x3bf irq 7**
> ** fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2**
> ** fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec**
> ** mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible**
> ** mcbus0 mid 2: CPU 4MB BCache**
> ** scsibus0: waiting 2 seconds for devices to settle...**
> ** scsibus1: waiting 2 seconds for devices to settle...**
> ** cd0 at scsibus1 target 5 lun 0: <DEC, RRD47   (C) DEC, 1206> SCSI2 
> 5/cdrom removable**
> ** siop1: target 5 now synchronous at 10.Mhz, offset 16**
> ** scsibus2: waiting 2 seconds for devices to settle...**
> ** probe(siop2:0:0): command timeout**
> *
> And thats where is just sits there. Any suggestions as to what I can do?

Do you know if the on-board i810 is attached to scsibus0 or scsibus2 ?
As you say there's nothing on the i810 I suspect your hard disks are on siop2.
Do you have a device on target 0 on scsibus2 ?

--
Manuel Bouyer <bouyer@antioche.eu.org>
--