Seems to see all processors....



[ using 558280 bytes of netbsd ELF symbol table ]
consinit: not using prom console

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5W (ALPHA-$Revision: 1.145 $) #1: Sat Jul 14 15:24:03 PDT 2001
    mjacob@nellie.feral.com:/tstsys/arch/alpha/compile/MJACOB.MP
AlphaServer 4100 5/533 4MB, 531MHz, s/n NI82107P5D
8192 byte page size, 4 processors.
total memory = 1536 MB
(2080 KB reserved for PROM, 1533 MB used by NetBSD)
avail memory = 1418 MB
using 9830 buffers containing 78640 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2
cpu0: VAX FP support, IEEE FP support, Primary Eligible
cpu0: Architecture extensions: 1<BWX>
cpu1 at mainbus0: ID 1, 21164A-2
cpu1: VAX FP support, IEEE FP support
cpu1: Architecture extensions: 1<BWX>
cpu2 at mainbus0: ID 2, 21164A-2
cpu2: VAX FP support, IEEE FP support
cpu2: Architecture extensions: 1<BWX>
cpu3 at mainbus0: ID 3, 21164A-2
cpu3: VAX FP support, IEEE FP support
cpu3: Architecture extensions: 1<BWX>
mcbus0 at mainbus0: 4MB BCache
mcmem0 at mcbus0 mid 1: Memory
mcpcia0 at mcbus0 mid 5: PCI Bridge
mcpcia0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci0 at mcpcia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci0 dev 1 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at kn300 irq 36
scsibus0 at siop0: 8 targets, 8 luns per target
tlp0 at pci0 dev 2 function 0: DECchip 21140 Ethernet, pass 1.2
tlp0: interrupting at kn300 irq 40
tlp0: DEC DE500-XA, Ethernet address 00:00:f8:01:8b:d7
tlp0: 10baseT, 100baseTX, 100baseTX-FDX, 10baseT-FDX
isp0 at pci0 dev 5 function 0
isp0: Qlogic ISP Driver, NetBSD (pci) Platform Version 2.0 Core Version 2.1
isp0: interrupting at kn300 irq 52
isp0: Differential Mode
isp0: Ultra Mode Capable
isp0: Board Revision 1040B, loaded F/W Revision 4.66.0
isp0: Last F/W revision was 5.57.1
isp0: 243 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
isp0: bus 0 set tgt 0 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 1 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 2 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 3 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 4 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 5 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 6 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 7 flags 0xfd00 off 0x8 period 0xc
isp0: bus 0 set tgt 8 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 9 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 10 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 11 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 12 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 13 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 14 flags 0xc5c0 off 0x0 period 0x0
isp0: bus 0 set tgt 15 flags 0xc5c0 off 0x0 period 0x0
isp0: driver initiated bus reset of bus 0
scsibus1 at isp0: 16 targets, 8 luns per target
mcpcia1 at mcbus0 mid 4: PCI Bridge
mcpcia1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci1 at mcpcia1 bus 0
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pceb0 at pci1 dev 1 function 0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x15)
isp1 at pci1 dev 5 function 0
isp1: interrupting at kn300 irq 20
isp1: Board Revision 2200, loaded F/W Revision 2.1.26
isp1: Firmware Attributes = 0x0
isp1: Installed in 64-Bit PCI slot
isp1: 986 max I/O commands supported
isp1: NVRAM Port WWN 0x210000e08b016899
isp1: fwoptions from nvram are 0xe
scsibus2 at isp1: 256 targets, 8 luns per target
eisa0 at pceb0
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbdprobe: reset error 5
pmsprobe: reset error 5
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
isp1: LIP Received
stray kn300 irq 52
isp1: Loop UP
isp1: Port Database Changed
scsibus0: waiting 2 seconds for devices to settle...
siop0: alloc newcdb at PHY addr 0x875fc000
cd0 at scsibus0 target 5 lun 0: <DEC, RRD46   (C) DEC, 1337> SCSI2 5/cdrom removable
cd0: sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
st0 at scsibus0 target 6 lun 0: <DEC, TLZ09     (C)DEC, 0173> SCSI2 1/sequential removable
st0: density code 36, variable blocks, write-enabled
st0: sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <IBM, DORS32160SUN2.1G, WA7A> SCSI2 0/direct fixed
sd0: 2063 MB, 6703 cyl, 5 head, 126 sec, 512 bytes/sect x 4226725 sectors
isp0: bus 0 set tgt 0 flags 0xfd00 off 0x8 period 0xc
sd0: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus1 target 1 lun 0: <SEAGATE, ST34371W SUN4.2G, 7462> SCSI2 0/direct fixed
sd1: 4094 MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sect x 8385121 sectors
isp0: bus 0 set tgt 1 flags 0xfd00 off 0x8 period 0xc
sd1: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd2 at scsibus1 target 2 lun 0: <QUANTUM, VK4550J  SUN4.2G, 8600> SCSI2 0/direct fixed
sd2: 4094 MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sect x 8385121 sectors
isp0: bus 0 set tgt 2 flags 0xfd00 off 0x8 period 0xc
sd2: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd3 at scsibus1 target 3 lun 0: <CONNER, CFP2107E  2.14GB, 1527> SCSI2 0/direct fixed
sd3: 2048 MB, 3999 cyl, 10 head, 104 sec, 512 bytes/sect x 4194304 sectors
isp0: bus 0 set tgt 3 flags 0xfd00 off 0x8 period 0xc
sd3: sync (100.0ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
ses0 at scsibus1 target 14 lun 0: <SYMBIOS, , 2> SCSI2 3/processor fixed
ses0: SAF-TE Compliant Device
isp0: bus 0 set tgt 14 flags 0xfd00 off 0x8 period 0xc
ses0: async, 8-bit transfers
scsibus2: waiting 2 seconds for devices to settle...
isp1: Firmware State <Config Wait->Ready>
isp1: Loop ID 0, AL_PA 0xef, Port ID 0xef, Loop State 0x2, Topology 'Private Loop'
isp1: Target 0 (Loop 0x0) Port ID 0xef (role Initiator) Arrived
 Port WWN 0x210000e08b016899
 Node WWN 0x200000e08b016899
isp1: Target 1 (Loop 0x1) Port ID 0xe8 (role Target) Arrived
 Port WWN 0x21000020370f848e
 Node WWN 0x20000020370f848e
isp1: Target 2 (Loop 0x2) Port ID 0xe4 (role Target) Arrived
 Port WWN 0x21000020370f83c0
 Node WWN 0x20000020370f83c0
isp1: Target 3 (Loop 0x3) Port ID 0xe2 (role Target) Arrived
 Port WWN 0x21000020370fa077
 Node WWN 0x20000020370fa077
isp1: Target 4 (Loop 0x4) Port ID 0xe1 (role Target) Arrived
 Port WWN 0x21000020370f847e
 Node WWN 0x20000020370f847e
sd4 at scsibus2 target 1 lun 0: <SEAGATE, ST39102F CLAR09, SG0C> SCSI2 0/direct fixed
sd4: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
sd5 at scsibus2 target 2 lun 0: <SEAGATE, ST39102F CLAR09, SG0C> SCSI2 0/direct fixed
sd5: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
sd6 at scsibus2 target 3 lun 0: <SEAGATE, ST39102F CLAR09, SG0C> SCSI2 0/direct fixed
sd6: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
sd7 at scsibus2 target 4 lun 0: <SEAGATE, ST39102F CLAR09, SG0C> SCSI2 0/direct fixed
sd7: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
root on sd3a dumps on sd3b
mountroot: trying nfs...
mountroot: trying ext2fs...
mountroot: trying ntfs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying lfs...
mountroot: trying ffs...
readclock: 1/7/14/22/30/42=>995149842 (995149678)
root file system type: ffs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
setclock: 1/7/14/22/31/23


-matt