This is a multi-part message in MIME format.
--------------26289FA1A5B955A691D35EF5
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

On a 533au2 with card in any slot, boot stops (dmesg shown below) boot
completes with a vga video card.. Is this a problem with a dual pci bus
machine, or is TGA support broken in 1.5V?
I included dmesg with tga and vga cards.
 -Mel

--------------26289FA1A5B955A691D35EF5
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.2"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.2"

[ using 512296 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5V (TODAY) #0: Tue May  8 03:43:14 EDT 2001
    root@casey184.doodle.com:/usr/src/sys/arch/alpha/compile/TODAY
DIGITAL Ultimate Workstation 533au2, 531MHz, s/n NI80701P6D
8192 byte page size, 2 processors.
total memory = 256 MB
(2056 KB reserved for PROM, 253 MB used by NetBSD)
avail memory = 230 MB
using 1638 buffers containing 13104 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2
cpu0: Architecture extensions: 1<BWX>
cpu1 at mainbus0: ID 1, 21164A-2
mcbus0 at mainbus0: 4MB BCache
mcmem0 at mcbus0 mid 1: Memory
mcpcia0 at mcbus0 mid 5: PCI Bridge
mcpcia0: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2
pci0 at mcpcia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci0 dev 1 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at kn300 irq 36
scsibus0 at siop0: 8 targets, 8 luns per target
isp0 at pci0 dev 4 function 0
isp0: interrupting at kn300 irq 48
scsibus1 at isp0: 16 targets, 8 luns per target
mcpcia1 at mcbus0 mid 4: PCI Bridge
mcpcia1: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2

--------------26289FA1A5B955A691D35EF5
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.1"

[ using 509680 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5V (MP) #2: Thu May 10 16:41:06 EDT 2001
    root@casey184.doodle.com:/usr/src/sys/arch/alpha/compile/MP
DIGITAL Ultimate Workstation 533au2, 531MHz, s/n NI80701P6D
8192 byte page size, 2 processors.
total memory = 256 MB
(2056 KB reserved for PROM, 253 MB used by NetBSD)
avail memory = 230 MB
using 1638 buffers containing 13104 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2
cpu0: Architecture extensions: 1<BWX>
cpu1 at mainbus0: ID 1, 21164A-2
mcbus0 at mainbus0: 4MB BCache
mcmem0 at mcbus0 mid 1: Memory
mcpcia0 at mcbus0 mid 5: PCI Bridge
mcpcia0: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2
pci0 at mcpcia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci0 dev 1 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at kn300 irq 36
scsibus0 at siop0: 8 targets, 8 luns per target
isp0 at pci0 dev 2 function 0
isp0: interrupting at kn300 irq 40
scsibus1 at isp0: 16 targets, 8 luns per target
mcpcia1 at mcbus0 mid 4: PCI Bridge
mcpcia1: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2
pci1 at mcpcia1 bus 0
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pceb0 at pci1 dev 1 function 0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x15)
vga0 at pci1 dev 2 function 0: Texas Instruments TVP4020 Permedia 2 (rev. 0x01)
wsdisplay0 at vga0: console (80x25, vt100 emulation)
tlp0 at pci1 dev 3 function 0: DECchip 21140A Ethernet, pass 2.0
tlp0: interrupting at kn300 irq 12
tlp0: DEC DE500-AA, Ethernet address 00:00:f8:06:25:91
nsphy0 at tlp0 phy 5: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eisa0 at pceb0
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
stray kn300 irq 40
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 5 lun 0: <DEC, RRD46   (C) DEC, 1337> SCSI2 5/cdrom removable
cd0: Sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <DEC, RZ1CB-CA (C) DEC, LYJ0> SCSI2 0/direct fixed
sd0: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd0: Sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus1 target 1 lun 0: <DEC, RZ1CB-CA (C) DEC, LYJ0> SCSI2 0/direct fixed
sd1: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd1: Sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd2 at scsibus1 target 2 lun 0: <DEC, RZ1CB-CA (C) DEC, LYJ0> SCSI2 0/direct fixed
sd2: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd2: Sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd3 at scsibus1 target 3 lun 0: <DEC, RZ1CB-CA (C) DEC, LYJ0> SCSI2 0/direct fixed
sd3: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd3: Sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd4 at scsibus1 target 4 lun 0: <DEC, RZ1CB-CA (C) DEC, LYJ0> SCSI2 0/direct fixed
sd4: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd4: Sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd5 at scsibus1 target 5 lun 0: <DEC, RZ1CB-CA (C) DEC, LYJ0> SCSI2 0/direct fixed
sd5: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd5: Sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
IPsec: Initialized Security Association Processing.
root on sd0a dumps on sd0b
root file system type: ffs
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0


--------------26289FA1A5B955A691D35EF5--