On Fri, 4 May 2001, Jason R Thorpe wrote:

> There is a new NetBSD/alpha binary snapshot available at:

Just out of curiosity, am I supposed to be able to run X with this
snapshot?  I'm using a zlxp-e2.  Running XalphaNetBSD gives me an 18MB
core file and a black screen.  I didn't test the CD-ROM drive, as it's
kind of wonky to begin with (SRM show dev lists it 7 times), so I don't
know if these dmesg errors mean anything.  Otherwise, success.  dmesg:


[ using 492264 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5V (GENERIC) #8: Thu May  3 23:47:40 PDT 2001
    root@frau-farbissina.shagadelic.org:/u2/snapshots/src/sys/arch/alpha/compile/GENERIC
AlphaStation 200 4/233, 233MHz, s/n 
8192 byte page size, 1 processor.
total memory = 49152 KB
(2000 KB reserved for PROM, 47152 KB used by NetBSD)
avail memory = 37832 KB
using 307 buffers containing 2456 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21064A-0
apecs0 at mainbus0: DECchip 21071 Core Logic chipset
apecs0: DC21071-CA pass 2, 64-bit memory bus
apecs0: DC21071-DA pass 2
pci0 at apecs0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci0 dev 6 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at isa irq 11
scsibus0 at siop0: 8 targets, 8 luns per target
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x84)
de0 at pci0 dev 11 function 0
de0: interrupting at isa irq 5
de0: DEC 21040 [10Mb/s] pass 2.4
de0: address 00:00:f8:23:44:f4
tga0 at pci0 dev 13 function 0: DC21030 step C, board type T32-08
tga0: 1024 x 768, 32bpp, Bt463 RAMDAC
tga0: interrupting at isa irq 10
wsdisplay0 at tga0: console (std, vt100 emulation)
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <IBM, 0663L12, 1012> SCSI2 0/direct fixed
de0: enabling 10baseT port
sd0: 1003 MB, 4119 cyl, 5 head, 99 sec, 512 bytes/sect x 2055035 sectors
sd0: Sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 6 lun 0: <CyberDrv, CD-ROM TW240S, 1.10> SCSI2 5/cdrom removable
probe(siop0:0:6:1): probe(siop0:0:6:1): request sense failed with error 22
probe(siop0:0:6:1): invalid return code from adapter: 3
probe(siop0:0:6:1): probe(siop0:0:6:1): request sense failed with error 22
probe(siop0:0:6:1): invalid return code from adapter: 3
cd0: Sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
root on sd0a dumps on sd0b
root file system type: ffs

john

-- 


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com