Subject: Support for Alpha Processor, Inc. UP1000 systems
To: None <port-alpha@netbsd.org>
From: Jason R Thorpe <thorpej@zembu.com>
List: port-alpha
Date: 06/01/2000 13:45:42
Hi folks...

I have just committed support for the Alpha Processor, Inc. UP1000 systems.
Info on these systems can be found at:

	http://www.alpha-processor.com/products/up1000-board.shtml

It's basically a PC-like board with whith an EV6 and the AMD 751 core
logic (same as is used on AMD Athlon systems).  SRM console software
is available for it.

These make a very economical 21246 system for anyone interested in a
Fast Alpha.

Many thanks to Alpha Processor, Inc. for providing a machine on which
to do the port, and to Bill Sommerfeld for giving the machine a place
to live and for booting my test kernels for me.

Below is the dmesg output from the installation kernel.

Enjoy!

-- 
        -- Jason R. Thorpe <thorpej@zembu.com>

Unrecognized boot flag '0'.
[ netbsd ELF symbol table not valid ]
[ no symbol table formats found ]
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4Z (INSTALL) #6: Thu Jun  1 11:16:00 PDT 2000
    thorpej@frau-farbissina:/u2/netbsd/src/sys/arch/alpha/compile/INSTALL
API UP1000 598 MHz
8192 byte page size, 1 processor.
total memory = 128 MB
(2672 KB reserved for PROM, 125 MB used by NetBSD)
avail memory = 108 MB
using 815 buffers containing 6520 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), UNKNOWN CPU TYPE (11:8)
cpu0: Architecture extensions: 307<PAT,MVI,CIX,FIX,BWX>
irongate0 at mainbus0: AMD 751 Core Logic + AGP Chipset, rev. 36
pci0 at irongate0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 1 function 0: vendor 0x1022 product 0x7007 (rev. 0x01)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 5 function 0: vendor 0x3d3d product 0x0009 (rev. 0x01)
wsdisplay0 at vga0
sio0 at pci0 dev 7 function 0: vendor 0x10b9 product 0x1533 (rev. 0xc3)
ex0 at pci0 dev 10 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x64)
ex0: interrupting at isa irq 10
ex0: MAC address 00:50:04:4b:24:d5
ukphy0 at ex0 phy 24: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0012, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pciide0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL CX10.2A>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 9787 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 20044080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CD-ROM CDU4011, , UY0A> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
vendor 0x10b9 product 0x7101 (miscellaneous prehistoric) at pci0 dev 17 function 0 not configured
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
md0: internal 4650K image area
WARNING: can't figure what device matches "DVA 0 0 0 0 0 0 0"
root on md0a dumps on md0b
WARNING: clock gained 7305 days -- CHECK AND RESET THE DATE!
root file system type: ffs