Subject: tekram dc-310 (symbios 53c810ae) doesn't work with pc164 ?
To: None <email@example.com>
From: Darren Reed <firstname.lastname@example.org>
Date: 08/09/1999 09:56:46
In some email I received from email@example.com, sie wrote:
> In message <199908081243.WAA03477@avalon.reed.wattle.id.au>, Darren Reed writes
> >it at least tells me how to boot from floppy, but how the f*** do I boot
> >from the hard drive I just installed on ? (sd0, I hope, on an 53c810)
> I've gotten decent luck with
> set boot_osflags -a
> set bootdef_dev dqa1
> (dqa1 was eide. 'show device' for a list of devices)
> set auto_action boot
> YMMV. I had to replace the NVRAM batteries on my board before it would
> remember this.
For what it's worth, it turned out to be that the SCSI card is useless,
I installed an EIDE drive and it is now working (dqa0). However, some
mention that the disks should show up in 'show config' as dka0 would
I'm attempting to use a Tekram DC-310 (Symbios 53C810AE) and "show config"
won't even list the controller. Is there any setting which can be changed
(when placed in a PC) that will make it work ?