On Fri Jan 29 15:23:01 1999, Ken Wellsch wrote:
> 
> On a possibly slightly related note, I took the weekend (Jan 23/99)
> weekly tar-balls home on a CD-R last night and built a GENERIC kernel
> on my PC164SX which died in a similar fashion (machine trap/panic just
> after the vga attach line (something like "wscons at vga0")).  I've

I burned a cd with the diskimage from tim and got major problems with
the ncr driver. The same problem happens when I build my own diskimage.
What is really strange is that i have no problem when i boot the
netbsd.gz from my ide drive (thats the kernel which is used in the diskimage).
Oh, and there is no problem when I boot from the same cd (i love CDRW's)
with the 19981016 diskimage.

from wd0:
===========================
ncr0 at pci0 dev 7 function 0: ncr 53c875 fast20 wide scsi
ncr0: interrupting at eb164 irq 1
ncr0: minsync=25, maxsync=254, maxoffs=16, 128 dwords burst, large dma fifo
ncr0: single-ended, open drain IRQ driver, using on-chip SRAM
ncr0: restart (scsi reset).
scsibus0 at ncr0: 16 targets, 8 luns per target
cd0 at scsibus0 targ 2 lun 0: <PIONEER, CD-ROM DR-U06S, 1.05> SCSI2 5/cdrom removable
probe(ncr0:2:1): 10.0 MB/s (100 ns, offset 16)
st0 at scsibus0 targ 5 lun 0: <SONY, SDT-5000, 3.26> SCSI2 1/sequential removable
st0: st0(ncr0:5:0): 5.0 MB/s (200 ns, offset 8)
drive empty
sd0 at scsibus0 targ 9 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed
sd0(ncr0:9:0): WIDE SCSI (16 bit) enabled
sd0(ncr0:9:0): 20.0 MB/s (100 ns, offset 15)
sd0: 4134MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
sd1 at scsibus0 targ 10 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed
sd1(ncr0:10:0): WIDE SCSI (16 bit) enabled
sd1(ncr0:10:0): 20.0 MB/s (100 ns, offset 15)
sd1: 4134MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors

from bootcd:
===========================
ncr0 at pci0 dev 7 function 0: ncr 53c875 fast20 wide scsi
ncr0: interrupting at eb164 irq 1
ncr0: minsync=12, maxsync=137, maxoffs=16, 128 dwords burst, large dma fifo
ncr0: single-ended, open drain IRQ driver, using on-chip SRAM
ncr0: restart (scsi reset).
scsibus0 at ncr0: 16 targets, 8 luns per target
cd0 at scsibus0 targ 2 lun 0: <PIONEER, CD-ROM DR-U06S, 1.05> SCSI2 5/cdrom removable
probe(ncr0:2:1): 16.0 MB/s (62 ns, offset 16)
probe(ncr0:2:1): COMMAND FAILED (4 82) @0xfffffe00000a5400.
probe(ncr0:2:1): COMMAND FAILED (4 82) @0xfffffe00000a5400.
probe(ncr0:2:1): COMMAND FAILED (4 82) @0xfffffe00000a5400.
ncr0: aborting job ...
ncr0:2: ERROR (10:0) (1-21-0) (30/95) @ (scripth 63c:19000020).
ncr0: script cmd = 88080000
ncr0: regdump: ca 10 80 95 47 30 02 0f 01 01 02 21 00 01 09 00.
ncr0: have to clear fifos.
ncr0: restart (fatal error).
probe(ncr0:2:1): COMMAND FAILED (9 2) @0xfffffe00000a5400.
ncr0: aborting job ...
ncr0:0: ERROR (90:0) (0-a3-2) (0/5) @ (script a0:430000a8).
ncr0: script cmd = 878b0000
ncr0: regdump: da 00 00 05 47 00 02 0f 71 00 02 a3 80 00 08 02.
ncr0: restart (fatal error).
probe(ncr0:2:1): COMMAND FAILED (9 ff) @0xfffffe00000a5400.
ncr0:0: ERROR (0:4) (0-0-0) (0/5) @ (script a8:878b0000).
ncr0: script cmd = 72060000
ncr0: regdump: da 00 80 05 47 00 02 0f 71 08 02 00 80 00 08 02.
ncr0: have to clear fifos.
probe(ncr0:2:1): COMMAND FAILED (ff 2) @0xfffffe00000a5400.
ncr0:0: ERROR (0:401) (0-0-0) (0/5) @ (script a8:878b0000).
ncr0: script cmd = 72060000
ncr0: regdump: da 00 80 05 47 00 03 0f 31 08 02 00 80 00 08 02.

Bernd