I suggest a send-pr on this with things that include the
release you're running. I keep getting yelled at for not getting
this kind of info, so it would probably help if this is done.



On Sat, 8 Aug 1998, nm wrote:

> Okay, its a pci 21140A based card that doesn't work.
> it's sitting in an axppci33 with a 21040 based card that
> DOES work.
> 
> if I if ifconfig de0 (the 21140A card) then subsequent ifconfigs
> of the de1 (the working 21040 card) have no effect and the system
> becomes unreliable...
> 
> However if de0 is not touched and de1 is ifconfig'd all appears fine...
> 
> When de0 is set up and you ping from host to host you can see lights
> flash on the hub and on the back of the card yet packets are not recieved...
> 
> Some pertinant info is at the end... if there is something I left
> out please email me.
> 
> Thanks
> Nick
> 
> 
> 
> Output from netstat -i...
> 
> Name  Mtu   Network       Address              Ipkts Ierrs    Opkts Oerrs
> Coll
> de0   1500  <Link>        00:00:e8:3b:27:c9        0     0        1     1
>   0
> de0   1500  192.168.1     192.168.1.1              0     0        1     1
>   0
> de1*  1500  <Link>        00:00:c0:99:c0:0d        0     0        0     0
>   0
> lo0   33200 <Link>                                25     0       25     0
>   0
> lo0   33200 your-net      localhost               25     0       25     0
>   0
> ppp0* 1500  <Link>                                 0     0        0     0
>   0
> ppp1* 1500  <Link>                                 0     0        0     0
>   0
> ppp2* 1500  <Link>                                 0     0        0     0
>   0
> ppp3* 1500  <Link>                                 0     0        0     0
>   0
> sl0*  296   <Link>                                 0     0        0     0
>   0
> sl1*  296   <Link>                                 0     0        0     0
>   0
> sl2*  296   <Link>                                 0     0        0     0
>   0
> sl3*  296   <Link>                                 0     0        0     0
>   0
> 
> 
> 
> Output from ifconfig de0...
> 
> de0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         media: 100baseTX status: active
>         inet 192.168.1.1 netmask 0xffffff00 broadcast 255.255.255.0
> 
> 
> 
> Some output from dmesg...
> 
> de0 at pci0 dev 8 function 0
> de0: interrupting at isa irq 5
> de0: ACCTON EN1207 21140A [10-100Mb/s] pass 2.2
> de0: address 00:00:e8:3b:27:c9
> de0: enabling 100baseTX port
> de0: enabling 10baseT port
>