Okay, its a pci 21140A based card that doesn't work.
it's sitting in an axppci33 with a 21040 based card that
DOES work.

if I if ifconfig de0 (the 21140A card) then subsequent ifconfigs
of the de1 (the working 21040 card) have no effect and the system
becomes unreliable...

However if de0 is not touched and de1 is ifconfig'd all appears fine...

When de0 is set up and you ping from host to host you can see lights
flash on the hub and on the back of the card yet packets are not recieved...

Some pertinant info is at the end... if there is something I left
out please email me.

Thanks
Nick



Output from netstat -i...

Name  Mtu   Network       Address              Ipkts Ierrs    Opkts Oerrs
Coll
de0   1500  <Link>        00:00:e8:3b:27:c9        0     0        1     1
  0
de0   1500  192.168.1     192.168.1.1              0     0        1     1
  0
de1*  1500  <Link>        00:00:c0:99:c0:0d        0     0        0     0
  0
lo0   33200 <Link>                                25     0       25     0
  0
lo0   33200 your-net      localhost               25     0       25     0
  0
ppp0* 1500  <Link>                                 0     0        0     0
  0
ppp1* 1500  <Link>                                 0     0        0     0
  0
ppp2* 1500  <Link>                                 0     0        0     0
  0
ppp3* 1500  <Link>                                 0     0        0     0
  0
sl0*  296   <Link>                                 0     0        0     0
  0
sl1*  296   <Link>                                 0     0        0     0
  0
sl2*  296   <Link>                                 0     0        0     0
  0
sl3*  296   <Link>                                 0     0        0     0
  0



Output from ifconfig de0...

de0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        media: 100baseTX status: active
        inet 192.168.1.1 netmask 0xffffff00 broadcast 255.255.255.0



Some output from dmesg...

de0 at pci0 dev 8 function 0
de0: interrupting at isa irq 5
de0: ACCTON EN1207 21140A [10-100Mb/s] pass 2.2
de0: address 00:00:e8:3b:27:c9
de0: enabling 100baseTX port
de0: enabling 10baseT port