Subject: Re: DE205 supported in NetBSD?
To: Jason Thorpe <>
From: Matt Thomas <>
List: port-alpha
Date: 06/12/1997 14:56:52
At 09:19 PM 6/11/97 -0400, Matt Thomas wrote:
>At 06:34 PM 6/6/97 -0700, Jason Thorpe wrote:
>>On Fri, 06 Jun 1997 21:33:18 -0400 
>> Matt Thomas <> wrote:
>> > Yep.  I should have a driver next week.  My question is what device
>> > name I should give it?  "lemac"?  "dl"?  "lm"?  "lc"?  (I kind of
>> > like "lc").
>>"lm" or "lc" work for me :-)  If you like "lc", I say go with it :-)
>I now have a compiling driver.  That was enough for tonight.  Tomorrow
>I'll watch it panic. :-)

It comes up and attaches and does the right stuff.  I haven't
tried to push any data through it yet.  that only took 4 panics
and 10 reboots. :-)

NetBSD 1.2D (CELEBRIS) #32: Thu Jun 12 14:42:25 EDT 1997
cpu0: family 5 model 2 step 5
cpu0: Intel Pentium (P54C) (586-class)
real mem  = 16379904
avail mem = 13983744
using 225 buffers containing 921600 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
VLSI Technology 82C592 CPU Bridge (host bridge) at pci0 dev 0 function 0 not con
VLSI Technology 82C593 ISA Bridge (ISA bridge) at pci0 dev 1 function 0 not conf
CMD Technology 640A (IDE mass storage, interface 0x0a, revision 0x02) at pci0 de
v 8 function 0 not configured
S3 86C864-1 ("Vision864") (VGA prehistoric) at pci0 dev 9 function 0 not configu
de0 at pci0 dev 11 function 0 at irq 9
de0: DEC 21041 [10Mb/s] pass 2.0
de0: address 08:00:2b:22:75:1f
de1 at pci0 dev 12 function 0 at irq 11
de1: DEC DE500-BA 21143 [10-100Mb/s] pass 3.0
de1: address 00:00:f8:03:cf:87
isa0 at mainbus0
lc0 at isa0 port 0x300-0x31f iomem 0xd0000-0xd07ff irq 5: DE203-AB     ***
lc0: address 08:00:2b:3e:a6:6b, 128KB RAM, 2KB window                  ***
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 drive 0: <Conner Peripherals 1275MB - CFS1275A>
wd0: 1219MB, 2477 cyl, 16 head, 63 sec, 512 bytes/sec
wd0: using 16-sector 16-bit pio transfers, lba addressing
wd1 at wdc0 drive 1: <Maxtor 7850 AV>
wd1: 814MB, 1654 cyl, 16 head, 63 sec, 512 bytes/sec
wd1: using 8-sector 16-bit pio transfers, lba addressing
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pms0 at pc0 irq 12
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4a60 ttymask 5ae2
de0: enabling 10baseT port
boot device: wd1
root on wd1a swap on wd1b
root file system type: ffs

% ifconfig -m lc0 
        media: autoselect status: no carrier
        supported media: 10base5/AUI 10baseT/UTP autoselect
        inet netmask 0xffffff00 

Matt Thomas               Internet:
3am Software Foundry      WWW URL:
Westford, MA              Disclaimer: I disavow all knowledge of this message