I'm trying to get NetBSD running on my Alpha Multia.  I'm able to load
NetBSD, but it crashes soon after loading.  :-(

The following is a log of what happens.  BTW, if it makes a difference,
it's a headless system.  Any ideas on what's wrong?  Also, is there 
anything that can be done about the unknown vendor complaints?

>>>boot dka0
(boot dka0.0.0.6.0 -file netjdu -flags n)
block 0 of dka0.0.0.6.0 is a valid boot block
reading 15 blocks from dka0.0.0.6.0
bootstrap code read in
base = 166000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 158000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

NetBSD/Alpha primary boot...
Jumping to entry point...


NetBSD/Alpha boot, Revision $NetBSD: version,v 1.5 1996/05/09 23:54:18 cgd Exp $
(cgd@bunnahabhain.pdl.cs.cmu.edu, Fri Sep 13 16:10:36 EDT 1996)

VMS PAL revision: 0x1000000010530
OSF PAL rev: 0x1000000020123
Switch to OSF PAL code succeeded.

boot_dev = "SCSI 0 6 0 0 0 0 0"
boot_file = "netjdu"
boot_flags = "n"
boot_console = "0"
Boot: netjdu n
open error: 2
can't boot 'netjdu'
Boot: /netbsd
1420032+137984+118752
calling fffffc0000230000 with 1e7, ac, 4, 200266c0, 0
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.

NetBSD 1.2 (GENERIC) #78: Fri Sep 13 12:09:37 EDT 1996
    cgd@bunnahabhain.pdl.cs.cmu.edu:/usr/src/sys/arch/alpha/compile/GENERIC
Alpha PC AXPpci33 ("NoName"), 233MHz
8192 byte page size, 1 processor.
real mem = 25165824 (2424832 reserved for PROM, 22740992 used by NetBSD)
avail mem = 16080896
using 277 buffers containing 2269184 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 21066/21068 (LCA4), UNKNOWN MINOR TYPE (2)
cpu0: VAX FP support, IEEE FP support, Primary Eligible
lca0 at mainbus0
pci0 at lca0 bus 0
unknown vendor 0x200d product 0x00c2 (class prehistoric, unknown subclass 0xc2, revision 0x0d) at pci0 dev 0 function 0 not configured
unknown vendor 0x200d product 0x00c2 (class prehistoric, unknown subclass 0xc2, revision 0x0d) at pci0 dev 1 function 0 not configured
unknown vendor 0x200d product 0x00c2 (class prehistoric, unknown subclass 0xc2, revision 0x0d) at pci0 dev 2 function 0 not configured
unknown vendor 0x200d product 0x00c2 (class prehistoric, unknown subclass 0xc2, revision 0x0d) at pci0 dev 3 function 0 not configured
unknown vendor 0x200d product 0x00c2 (class prehistoric, unknown subclass 0xc2, revision 0x0d) at pci0 dev 4 function 0 not configured
unknown vendor 0x200d product 0x00c2 (class prehistoric, unknown subclass 0xc2, revision 0x0d) at pci0 dev 5 function 0 not configured
ncr0 at pci0 dev 6 function 0: NCR 53c810 SCSI
ncr0: interrupting at isa irq 11
ncr0: restart (scsi reset).
scsibus0 at ncr0
sd0 at scsibus0 targ 0 lun 0: <DEC, RZ26F    (C) DEC, 1Q0A> SCSI2 0/direct fixed
sd0: sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1001MB, 3117 cyl, 8 head, 82 sec, 512 bytes/sec
sio0 at pci0 dev 7 function 0: Intel 82378IB PCI-ISA Bridge (System I/O) (rev. 0x84)
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
sio_intr_establish: irq 4: warning: using edge-triggered on level-triggered
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
sio_intr_establish: irq 3: warning: using edge-triggered on level-triggered
lpt0 at isa0 port 0x3bc-0x3c3 irq 7
pcprobe: reset error 1
pckbd0 at isa0 irq 1
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
de0 at pci0 dev 8 function 0: DC21040 [10Mb/s] pass 2.3
de0: Ethernet address 08:00:2b:e6:ed:83
de0: enabling Thinwire/AUI port
de0: interrupting at isa irq 15
pcivga0 at pci0 dev 9 function 0: unknown vendor 0x201c product 0x0001 (rev. 0x1c)
wscons0 at pcivga0panic: wscons_emul_attach: bogus location (n: 25/80, c: 819/15
halted.


halted CPU 0

halt code = 5
HALT instruction executed
PC = fffffc0000230190

Unexpected Machine Check through vector 00000067

IPRs:
EXC_ADD:00000000001303A0  ICCSR:   0000000000000000  HIER:   000000001FFFDC70
HIRR:   0000000000001022  MM_CSR:  0000000000005120  DC_STAT:0000000000000003
DC_ADDR:00000007FFFFFFFF  ESR:     6FB0D8F900020000  EAR:    0000000000000070
STAT0:  0000013A0000013A  STAT1:   0000080000000800  VA:     0000000000000000
EXC_SUM:0000000000000000  BC_TAG:  0000000000000000  

Process entry, pcb = 0174F900
 pc: 00000000 001303A0  ps: 18000000 00000000
 r2: 00000000 001306D4  r5: 00000000 00001F04
 r3: 00000000 0002A9C8  r6: 00000000 0012FC98
 r4: 00000000 00000048  r7: 00000001 A1B5B34E

exception context saved starting at 017517C0

GPRs:
  0: 00000000 0000001F  16: 00000000 00000000
  1: 00000000 00000000  17: 00000001 20000000
  2: 00000000 0010C9E0  18: 00000000 00000000
  3: 00000000 00000000  19: 00000000 0160DA18
  4: 00000000 00000000  20: 00000000 0174F900
  5: 00000000 00128B60  21: 00000000 00000001
  6: 00000000 0012FC98  22: 00000000 00142B90
  7: 00000001 A1B5B34E  23: 00000000 0000001F
  8: 00000000 00000000  24: 00000000 00000000
  9: 00000000 0174F900  25: 00000000 00000001
 10: 00000000 00000003  26: 00000000 00059A00
 11: 00000000 00000001  27: 00000000 00130FB0
 12: 00000000 00000000  28: 00000000 00146DF0
 13: 00000000 00128A40  29: 00000000 01751958
 14: 00000000 00000000  30: 00000000 01751918
 15: 00000000 00000001

dump of active call frames:

PC  =  0013039C
PD  =  0010C9E0 (krn$_set_console_mode)
FP  =  01751958
SP  =  01751918

R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 R29 saved starting at 01751970

R2  =  00114128
R3  =  001292C0
R4  =  000DFD98
R5  =  00000048
R6  =  00000000
R7  =  00000001
R8  =  00000004
R9  =  00000000
R10 =  00000000
R11 =  00000000
R12 =  00000000
R13 =  00000000
R14 =  00000000
R15 =  00000000
R29 =  017519F8

PC  =  00075574
PD  =  00114128 (start_drivers)
FP  =  017519F8
SP  =  017519B8

R2 R3 R4 R5 R29 saved starting at 01751A00

R2  =  0010A310
R3  =  00000000
R4  =  000DFD98
R5  =  00000048
R29 =  01751A38

PC  =  0004BEE8
PD  =  0010A310 (system_reset_or_error)
FP  =  01751A38
SP  =  017519F8

R2 R3 R4 R5 R6 R7 R8 R29 saved starting at 01751A48

R2  =  00111A30
R3  =  0174F900
R4  =  0174FAC8
R5  =  0174F900
R6  =  00000000
R7  =  00000000
R8  =  00000000
R29 =  01751A98

PC  =  0006A7C0
PD  =  00111A30 (krn$_process)
FP  =  01751A98
SP  =  01751A58

R2 R3 R4 R5 R29 saved starting at 01751AA0

R2  =  00000000
R3  =  00000000
R4  =  00000000
R5  =  00000000
R29 =  00000000


access violation fault
    PCB =  0174F900 (entry)
    PC  =  0004FED0
    VA  =  00000028

exception context saved starting at 01751900

GPRs:
  0: 00000000 00000000  16: 00000000 00000000
  1: 00000000 03FFFFFF  17: 00000000 000E1518
  2: 00000000 0010B610  18: 00000000 000464D4
  3: 00000000 00038340  19: 00000000 00109390
  4: 00000000 00000000  20: 00000000 0174F900
  5: 00000000 00038340  21: 00000000 00000001
  6: 00000000 00000000  22: 00000000 00142B90
  7: 00000000 00000000  23: 00000000 00000000
  8: 00000000 00000000  24: 00000000 00000000
  9: 00000000 00000000  25: 00000000 00000002
 10: 00000000 00000000  26: 00000000 0004FEB0
 11: 00000000 00000000  27: 00000000 00114228
 12: 00000000 00000000  28: 00000000 00146DF0
 13: 00000000 00000000  29: 00000000 01751A68
 14: 00000000 00000000  30: 00000000 01751A68
 15: 00000000 00000000

dump of active call frames:

PC  =  0004FED0
PD  =  0010B610 (decc$fclose)
FP  =  01751A68
SP  =  01751A68

R2 R3 R4 R29 saved starting at 01751A70

R2  =  00111A30
R3  =  0174F900
R4  =  0174F9D8
R29 =  01751A98

PC  =  0006A83C
PD  =  00111A30 (krn$_process)
FP  =  01751A98
SP  =  01751A98

R2 R3 R4 R5 R29 saved starting at 01751AA0

R2  =  00000000
R3  =  00000000
R4  =  00000000
R5  =  00000000
R29 =  00000000


Brk 0 at 0012FF08

0012FF08! BPT          FF

-- 
Trip Martin   | Harry Browne, libertarian for president
tm@squonk.net | http://www.harrybrowne96.org/
Power tends to corrupt; absolute power corrupts absolutely - Lord Acton
(A scary but very accurate view of modern times)