After installing the latest snapshot on a multi (using the ROM "cat"
command !) we the panic below.

cgd suggest asking the list about anyone using multia's and the
SRM version etc that may work. This thing has no non-standard
hardware, and is as basic as they come.

BTW there is no Ethernet plugged in.

Help !
--
Peter Galbavy
@demon internet



Multia SRM Console  BL5 V3.8-2, built on Aug 10 1995 at 03:04:14
Testing Memory from 8 to 32 meg...
Executing power-up script...
Multia SRM Console  BL5 V3.8-2, built on Aug 10 1995 at 03:04:14
Switching network ewa0.0.0.8.0 from Twisted Pair to AUI...
Switching network ewa0.0.0.8.0 from AUI to Thin Wire...
>>>
>>>
>>>boot dka
(boot dka0.0.0.6.0)
block 0 of dka0.0.0.6.0 is a valid boot block
reading 15 blocks from dka0.0.0.6.0
bootstrap code read in
base = 166000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 158000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

NetBSD/Alpha primary boot...
Jumping to entry point...


NetBSD/Alpha boot, Revision $NetBSD: version,v 1.4 1995/11/23 02:40:09
cgd Exp $
(cgd@bunnahabhain.pdl.cs.cmu.edu, Thu Apr 25 14:57:49 EDT 1996)

VMS PAL revision: 0x1000000010530
OSF PAL rev: 0x1000000020123
Switch to OSF PAL code succeeded.

boot_dev = "SCSI 0 6 0 0 0 0 0"
boot_file = ""
boot_flags = ""
boot_console = "0"
Boot: /netbsd
1960160+133904+90336
calling fffffc0000230000 with 225, ac, 4, 200266d0, 0
constype = 0
ctb->ctb_term_type = 0x2
ctb->ctb_turboslot = 0x10000
                            Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights
reserved.

NetBSD 1.1B (GENERIC) #8: Thu Apr 25 09:29:47 EDT 1996
    cgd@bunnahabhain.pdl.cs.cmu.edu:/usr/src/sys/arch/alpha/compile/GENERIC
Alpha PC AXPpci33 ("NoName"), 233MHz
8192 byte page size, 1 processor.
real mem = 33554432 (2424832 reserved for PROM, 31129600 used by NetBSD)
avail mem = 24477696
using 202 buffers containing 1654784 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 21066/21068 (LCA4), UNKNOWN MINOR TYPE (2)
cpu0: VAX FP support, IEEE FP support, has I/O access
lca0 at mainbus0
pci0 at lca0 bus 0
unknown vendor 0x2038 product 0x00c2 (class prehistoric, unknown
subclass 0xc2,
revision 0x38) at pci0 dev 0 function 0 not configured
unknown vendor 0x2038 product 0x00c2 (class prehistoric, unknown
subclass 0xc2,
revision 0x38) at pci0 dev 1 function 0 not configured
unknown vendor 0x2038 product 0x00c2 (class prehistoric, unknown
subclass 0xc2,
revision 0x38) at pci0 dev 2 function 0 not configured
unknown vendor 0x2038 product 0x00c2 (class prehistoric, unknown
subclass 0xc2,
revision 0x38) at pci0 dev 3 function 0 not configured
unknown vendor 0x2038 product 0x00c2 (class prehistoric, unknown
subclass 0xc2,
revision 0x38) at pci0 dev 4 function 0 not configured
unknown vendor 0x2038 product 0x00c2 (class prehistoric, unknown
subclass 0xc2,
revision 0x38) at pci0 dev 5 function 0 not configured
ncr0 at pci0 dev 6 function 0: NCR 53c810 SCSI
ncr0: interrupting at ISA irq 11
ncr0: restart (scsi reset).
scsibus0 at ncr0
sd0 at scsibus0 targ 0 lun 0: <TOSHIBA, MK1924FBV, 802A> SCSI2 0/direct
fixed
sd0: sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
518MB, 4212 cyl, 4 head, 63 sec, 512 bytes/sec
sio0 at pci0 dev 7 function 0: Intel 82378IB PCI-ISA Bridge (System I/O)
(rev. 0
x84)
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
panic: foo XXX
halted.


halted CPU 0