Hi,

Just to let people know I've checked in an initial port to the simtec
eb7500atx board, aka as a RiscStation.  I've only tested it on a board
running ABLE (simtec's firmware) and not from RISC-OS.

I still need to tidy up the code, and add more devices to it, it's
current dmesg is below.

Cheers,
Chris:

NetBSD 1.6ZG (RISCSTATION) #42: Sat Jan  3 14:37:38 GMT 2004
       
chris@indy:/extra/obj/current/acorn32/sys/arch/acorn32/compile/RISCSTAT
ION
total memory = 31744 KB
avail memory = 28076 KB
mainbus0 (root)
cpu0 at mainbus0: ARM7500FE rev 0 (ARM7 core)
cpu0: IDC enabled WB enabled EABT
cpu0: 4KB/16B 4-way write-through unified cache
iomd0 at mainbus0: ARM7500FE IOMD version 1
iomd0: DRAM refresh=16us
clock0 at iomd0
kbd0 at iomd0
opms0 at iomd0opms0: Mouse cmd failed, cmd = f5, status = 0
Mouse not present

vidc0 at mainbus0: ARM7500FE video and sound macrocell
vidcaudio0 at vidc0: 16-bit external DAC
audio0 at vidcaudio0: half duplex
vidcconsole0 at vidc0: refclk=32MHz 300KB DRAM
vt0 at vidc0: console driver [V203E] using vt100 VIDC
vt1 at vidc0: console driver [V203E] using vt100 VIDC
vt2 at vidc0: console driver [V203E] using vt100 VIDC
vt3 at vidc0: console driver [V203E] using vt100 VIDC
vt4 at vidc0: console driver [V203E] using vt100 VIDC
vt5 at vidc0: console driver [V203E] using vt100 VIDC
rsbus0 at mainbus0
cs0 at rsbus0
mapping iobase=0x03010600, for 0x00000040
Claiming IRQ
Cs attach addr: 0x0100
cs0: CS8920M rev. F, address 00:01:3d:e0:fe:8c, media UTP <full-duplex>
rside0 at rsbus0
atabus0 at rside0 channel 0
atabus1 at rside0 channel 1
ipl_bio=80008808 ipl_net=80000000 ipl_tty=80000000 ipl_vm=80000000
ipl_audio=00000000 ipl_imp=00000000 ipl_high=00000000
ipl_serial=00000000
clock: hz=100 stathz = 0 profhz = 0
Setting statclock to 0Hz (-1 ticks)
WARNING: delay(10000) took 6756 us
wd0 at atabus0 drive 0: <QUANTUM FIREBALL ST1.6A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1539 MB, 3128 cyl, 16 head, 63 sec, 512 bytes/sect x 3153024
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
boot device: <unknown>
root device: cs0
dump device:
file system (default generic): nfs
root on cs0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 10.30.64.10
nfs_boot: my_name=perky
nfs_boot: my_domain=dokein.co.uk
nfs_boot: my_addr=10.30.64.90
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=10.30.64.1
root on 10.30.64.10:/extra/nfsclient/perky