pkgsrc-WIP-changes archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
suitesparse: committed to -current many moons ago
Module Name: pkgsrc-wip
Committed By: Kevin Bloom <kevin.bloom%posteo.net@localhost>
Pushed By: nuclearkev
Date: Mon Jun 16 14:33:13 2025 +0000
Changeset: 8668591a848677df6ed2ef6a87056081c75e836a
Removed Files:
suitesparse/DESCR
suitesparse/Makefile
suitesparse/PLIST
suitesparse/buildlink3.mk
suitesparse/distinfo
suitesparse/files/SuiteSparse_config.mk
suitesparse/patches/patch-GraphBLAS_CMakeLists.txt
suitesparse/patches/patch-ParU_Source_paru__init__rowFronts.cpp
suitesparse/patches/patch-SPQR_Source_spqr__factorize.cpp
Log Message:
suitesparse: committed to -current many moons ago
To see a diff of this commit:
https://wip.pkgsrc.org/cgi-bin/gitweb.cgi?p=pkgsrc-wip.git;a=commitdiff;h=8668591a848677df6ed2ef6a87056081c75e836a
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
diffstat:
suitesparse/DESCR | 14 -
suitesparse/Makefile | 25 --
suitesparse/PLIST | 211 -----------
suitesparse/buildlink3.mk | 15 -
suitesparse/distinfo | 8 -
suitesparse/files/SuiteSparse_config.mk | 397 ---------------------
suitesparse/patches/patch-GraphBLAS_CMakeLists.txt | 15 -
.../patch-ParU_Source_paru__init__rowFronts.cpp | 25 --
.../patches/patch-SPQR_Source_spqr__factorize.cpp | 14 -
9 files changed, 724 deletions(-)
diffs:
diff --git a/suitesparse/DESCR b/suitesparse/DESCR
deleted file mode 100644
index e13eee0f61..0000000000
--- a/suitesparse/DESCR
+++ /dev/null
@@ -1,14 +0,0 @@
-SuiteSparse is a set of sparse matrices libraries.
-It contains:
- * AMD: symmetric approximate minimum degree
- * BTF: permutation to block triangular form (beta)
- * CCOLAMD: constrained column approximate minimum degree
- * COLAMD: column approximate minimum degree
- * CHOLMOD: sparse supernodal Cholesky factorization and
- update/downdate
- * KLU: sparse LU factorization, for circuit simulation (beta)
- * LDL: a simple LDL^T factorization
- * UMFPACK: sparse multifrontal LU factorization
- * UFconfig: common configuration for all of the above
- * CSparse: a concise sparse matrix package
- * CXSparse: and extended version of CSparse
diff --git a/suitesparse/Makefile b/suitesparse/Makefile
deleted file mode 100644
index a93ebfabc4..0000000000
--- a/suitesparse/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-# $NetBSD: Makefile,v 1.4 2024/08/27 17:24:54 ktnb Exp $
-
-DISTNAME= SuiteSparse-7.8.2
-PKGNAME= ${DISTNAME:tl}
-CATEGORIES= math
-MASTER_SITES= ${MASTER_SITE_GITHUB:=DrTimothyAldenDavis/}
-GITHUB_TAG= v${PKGVERSION_NOREV}
-
-MAINTAINER= pkgsrc-users%NetBSD.org@localhost
-HOMEPAGE= http://www.cise.ufl.edu/research/sparse/SuiteSparse/
-COMMENT= Set of packages for sparse matrices calculation
-LICENSE= gnu-gpl-v2 AND gnu-lgpl-v2
-
-USE_LANGUAGES= c c++ fortran8
-
-WRKSRC= ${WRKDIR}/${DISTNAME}
-
-.include "../../devel/cmake/build.mk"
-.include "../../mk/blas.buildlink3.mk"
-.include "../../math/metis/buildlink3.mk"
-.include "../../math/mpfr/buildlink3.mk"
-.include "../../math/openblas/buildlink3.mk"
-.include "../../mk/dlopen.buildlink3.mk"
-.include "../../parallel/openmp/buildlink3.mk"
-.include "../../mk/bsd.pkg.mk"
diff --git a/suitesparse/PLIST b/suitesparse/PLIST
deleted file mode 100644
index 7aab896ec6..0000000000
--- a/suitesparse/PLIST
+++ /dev/null
@@ -1,211 +0,0 @@
-@comment $NetBSD: PLIST,v 1.4 2024/08/27 17:24:54 ktnb Exp $
-bin/suitesparse_mongoose
-include/suitesparse/GraphBLAS.h
-include/suitesparse/LAGraph.h
-include/suitesparse/LAGraphX.h
-include/suitesparse/Mongoose.hpp
-include/suitesparse/ParU.h
-include/suitesparse/RBio.h
-include/suitesparse/SPEX.h
-include/suitesparse/SuiteSparseQR.hpp
-include/suitesparse/SuiteSparseQR_C.h
-include/suitesparse/SuiteSparseQR_definitions.h
-include/suitesparse/SuiteSparse_config.h
-include/suitesparse/amd.h
-include/suitesparse/btf.h
-include/suitesparse/camd.h
-include/suitesparse/ccolamd.h
-include/suitesparse/cholmod.h
-include/suitesparse/colamd.h
-include/suitesparse/cs.h
-include/suitesparse/klu.h
-include/suitesparse/klu_cholmod.h
-include/suitesparse/ldl.h
-include/suitesparse/spex_python_connect.h
-include/suitesparse/umfpack.h
-lib/cmake/AMD/AMDConfig.cmake
-lib/cmake/AMD/AMDConfigVersion.cmake
-lib/cmake/AMD/AMDTargets-release.cmake
-lib/cmake/AMD/AMDTargets.cmake
-lib/cmake/BTF/BTFConfig.cmake
-lib/cmake/BTF/BTFConfigVersion.cmake
-lib/cmake/BTF/BTFTargets-release.cmake
-lib/cmake/BTF/BTFTargets.cmake
-lib/cmake/CAMD/CAMDConfig.cmake
-lib/cmake/CAMD/CAMDConfigVersion.cmake
-lib/cmake/CAMD/CAMDTargets-release.cmake
-lib/cmake/CAMD/CAMDTargets.cmake
-lib/cmake/CCOLAMD/CCOLAMDConfig.cmake
-lib/cmake/CCOLAMD/CCOLAMDConfigVersion.cmake
-lib/cmake/CCOLAMD/CCOLAMDTargets-release.cmake
-lib/cmake/CCOLAMD/CCOLAMDTargets.cmake
-lib/cmake/CHOLMOD/CHOLMODConfig.cmake
-lib/cmake/CHOLMOD/CHOLMODConfigVersion.cmake
-lib/cmake/CHOLMOD/CHOLMODTargets-release.cmake
-lib/cmake/CHOLMOD/CHOLMODTargets.cmake
-lib/cmake/COLAMD/COLAMDConfig.cmake
-lib/cmake/COLAMD/COLAMDConfigVersion.cmake
-lib/cmake/COLAMD/COLAMDTargets-release.cmake
-lib/cmake/COLAMD/COLAMDTargets.cmake
-lib/cmake/CXSparse/CXSparseConfig.cmake
-lib/cmake/CXSparse/CXSparseConfigVersion.cmake
-lib/cmake/CXSparse/CXSparseTargets-release.cmake
-lib/cmake/CXSparse/CXSparseTargets.cmake
-lib/cmake/GraphBLAS/GraphBLASConfig.cmake
-lib/cmake/GraphBLAS/GraphBLASConfigVersion.cmake
-lib/cmake/GraphBLAS/GraphBLASTargets-release.cmake
-lib/cmake/GraphBLAS/GraphBLASTargets.cmake
-lib/cmake/KLU/KLUConfig.cmake
-lib/cmake/KLU/KLUConfigVersion.cmake
-lib/cmake/KLU/KLUTargets-release.cmake
-lib/cmake/KLU/KLUTargets.cmake
-lib/cmake/KLU_CHOLMOD/KLU_CHOLMODConfig.cmake
-lib/cmake/KLU_CHOLMOD/KLU_CHOLMODConfigVersion.cmake
-lib/cmake/KLU_CHOLMOD/KLU_CHOLMODTargets-release.cmake
-lib/cmake/KLU_CHOLMOD/KLU_CHOLMODTargets.cmake
-lib/cmake/LAGraph/FindGraphBLAS.cmake
-lib/cmake/LAGraph/LAGraphConfig.cmake
-lib/cmake/LAGraph/LAGraphConfigVersion.cmake
-lib/cmake/LAGraph/LAGraphTargets-release.cmake
-lib/cmake/LAGraph/LAGraphTargets.cmake
-lib/cmake/LDL/LDLConfig.cmake
-lib/cmake/LDL/LDLConfigVersion.cmake
-lib/cmake/LDL/LDLTargets-release.cmake
-lib/cmake/LDL/LDLTargets.cmake
-lib/cmake/ParU/ParUConfig.cmake
-lib/cmake/ParU/ParUConfigVersion.cmake
-lib/cmake/ParU/ParUTargets-release.cmake
-lib/cmake/ParU/ParUTargets.cmake
-lib/cmake/RBio/RBioConfig.cmake
-lib/cmake/RBio/RBioConfigVersion.cmake
-lib/cmake/RBio/RBioTargets-release.cmake
-lib/cmake/RBio/RBioTargets.cmake
-lib/cmake/SPEX/FindGMP.cmake
-lib/cmake/SPEX/FindMPFR.cmake
-lib/cmake/SPEX/SPEXConfig.cmake
-lib/cmake/SPEX/SPEXConfigVersion.cmake
-lib/cmake/SPEX/SPEXTargets-release.cmake
-lib/cmake/SPEX/SPEXTargets.cmake
-lib/cmake/SPQR/SPQRConfig.cmake
-lib/cmake/SPQR/SPQRConfigVersion.cmake
-lib/cmake/SPQR/SPQRTargets-release.cmake
-lib/cmake/SPQR/SPQRTargets.cmake
-lib/cmake/SuiteSparse/SuiteSparseBLAS.cmake
-lib/cmake/SuiteSparse/SuiteSparseBLAS32.cmake
-lib/cmake/SuiteSparse/SuiteSparseBLAS64.cmake
-lib/cmake/SuiteSparse/SuiteSparseLAPACK.cmake
-lib/cmake/SuiteSparse/SuiteSparsePolicy.cmake
-lib/cmake/SuiteSparse/SuiteSparseReport.cmake
-lib/cmake/SuiteSparse/SuiteSparse__thread.cmake
-lib/cmake/SuiteSparse_Mongoose/SuiteSparse_MongooseConfig.cmake
-lib/cmake/SuiteSparse_Mongoose/SuiteSparse_MongooseConfigVersion.cmake
-lib/cmake/SuiteSparse_Mongoose/SuiteSparse_MongooseTargets-release.cmake
-lib/cmake/SuiteSparse_Mongoose/SuiteSparse_MongooseTargets.cmake
-lib/cmake/SuiteSparse_config/SuiteSparse_configConfig.cmake
-lib/cmake/SuiteSparse_config/SuiteSparse_configConfigVersion.cmake
-lib/cmake/SuiteSparse_config/SuiteSparse_configTargets-release.cmake
-lib/cmake/SuiteSparse_config/SuiteSparse_configTargets.cmake
-lib/cmake/UMFPACK/UMFPACKConfig.cmake
-lib/cmake/UMFPACK/UMFPACKConfigVersion.cmake
-lib/cmake/UMFPACK/UMFPACKTargets-release.cmake
-lib/cmake/UMFPACK/UMFPACKTargets.cmake
-lib/libamd.a
-lib/libamd.so
-lib/libamd.so.3
-lib/libamd.so.3.3.3
-lib/libbtf.a
-lib/libbtf.so
-lib/libbtf.so.2
-lib/libbtf.so.2.3.2
-lib/libcamd.a
-lib/libcamd.so
-lib/libcamd.so.3
-lib/libcamd.so.3.3.3
-lib/libccolamd.a
-lib/libccolamd.so
-lib/libccolamd.so.3
-lib/libccolamd.so.3.3.4
-lib/libcholmod.a
-lib/libcholmod.so
-lib/libcholmod.so.5
-lib/libcholmod.so.5.3.0
-lib/libcolamd.a
-lib/libcolamd.so
-lib/libcolamd.so.3
-lib/libcolamd.so.3.3.4
-lib/libcxsparse.a
-lib/libcxsparse.so
-lib/libcxsparse.so.4
-lib/libcxsparse.so.4.4.1
-lib/libgraphblas.so
-lib/libgraphblas.so.9
-lib/libgraphblas.so.9.3.1
-lib/libklu.a
-lib/libklu.so
-lib/libklu.so.2
-lib/libklu.so.2.3.4
-lib/libklu_cholmod.a
-lib/libklu_cholmod.so
-lib/libklu_cholmod.so.2
-lib/libklu_cholmod.so.2.3.4
-lib/liblagraph.a
-lib/liblagraph.so
-lib/liblagraph.so.1
-lib/liblagraph.so.1.1.4
-lib/liblagraphx.a
-lib/liblagraphx.so
-lib/liblagraphx.so.1
-lib/liblagraphx.so.1.1.4
-lib/libldl.a
-lib/libldl.so
-lib/libldl.so.3
-lib/libldl.so.3.3.2
-lib/libparu.a
-lib/libparu.so
-lib/libparu.so.0
-lib/libparu.so.0.3.0
-lib/librbio.a
-lib/librbio.so
-lib/librbio.so.4
-lib/librbio.so.4.3.3
-lib/libspex.a
-lib/libspex.so
-lib/libspex.so.3
-lib/libspex.so.3.2.1
-lib/libspexpython.so
-lib/libspexpython.so.3
-lib/libspexpython.so.3.2.1
-lib/libspqr.a
-lib/libspqr.so
-lib/libspqr.so.4
-lib/libspqr.so.4.3.4
-lib/libsuitesparse_mongoose.a
-lib/libsuitesparse_mongoose.so
-lib/libsuitesparse_mongoose.so.3
-lib/libsuitesparseconfig.a
-lib/libsuitesparseconfig.so
-lib/libsuitesparseconfig.so.7
-lib/libsuitesparseconfig.so.${PKGVERSION}
-lib/libumfpack.a
-lib/libumfpack.so
-lib/libumfpack.so.6
-lib/libumfpack.so.6.3.4
-lib/pkgconfig/AMD.pc
-lib/pkgconfig/BTF.pc
-lib/pkgconfig/CAMD.pc
-lib/pkgconfig/CCOLAMD.pc
-lib/pkgconfig/CHOLMOD.pc
-lib/pkgconfig/COLAMD.pc
-lib/pkgconfig/CXSparse.pc
-lib/pkgconfig/GraphBLAS.pc
-lib/pkgconfig/KLU.pc
-lib/pkgconfig/KLU_CHOLMOD.pc
-lib/pkgconfig/LAGraph.pc
-lib/pkgconfig/LDL.pc
-lib/pkgconfig/ParU.pc
-lib/pkgconfig/RBio.pc
-lib/pkgconfig/SPEX.pc
-lib/pkgconfig/SPQR.pc
-lib/pkgconfig/SuiteSparse_Mongoose.pc
-lib/pkgconfig/SuiteSparse_config.pc
-lib/pkgconfig/UMFPACK.pc
diff --git a/suitesparse/buildlink3.mk b/suitesparse/buildlink3.mk
deleted file mode 100644
index dfa96b35c7..0000000000
--- a/suitesparse/buildlink3.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-# $NetBSD: buildlink3.mk,v 1.1 2024/06/14 13:19:53 ktnb Exp $
-
-BUILDLINK_TREE+= suitesparse
-
-.if !defined(SUITESPARSE_BUILDLINK3_MK)
-SUITESPARSE_BUILDLINK3_MK:=
-
-BUILDLINK_API_DEPENDS.suitesparse+= suitesparse>=3.6.1
-BUILDLINK_PKGSRCDIR.suitesparse?= ../../math/suitesparse
-
-.include "../../mk/blas.buildlink3.mk"
-.include "../../math/metis/buildlink3.mk"
-.endif # SUITESPARSE_BUILDLINK3_MK
-
-BUILDLINK_TREE+= -suitesparse
diff --git a/suitesparse/distinfo b/suitesparse/distinfo
deleted file mode 100644
index dadced54a2..0000000000
--- a/suitesparse/distinfo
+++ /dev/null
@@ -1,8 +0,0 @@
-$NetBSD: distinfo,v 1.4 2024/08/27 17:24:54 ktnb Exp $
-
-BLAKE2s (SuiteSparse-7.8.2.tar.gz) = 098fcd79dfe355e65b366e112745fa77dab1889cc48ae44bbb0158dc2bbd3100
-SHA512 (SuiteSparse-7.8.2.tar.gz) = beb9ea85b47e46785a91913d0b52ef86a59f797f3a3a6df4fced31c4f990277ef627b6baae52256dea10e60e4eff5e82e8b5a3d6e20a63de47953674cf34f921
-Size (SuiteSparse-7.8.2.tar.gz) = 87337633 bytes
-SHA1 (patch-GraphBLAS_CMakeLists.txt) = 2f32b3534f08bcfd7fa5fc53dccbc6fd283a9976
-SHA1 (patch-ParU_Source_paru__init__rowFronts.cpp) = 52fdeca699c598f745ce35210242f1480ab24426
-SHA1 (patch-SPQR_Source_spqr__factorize.cpp) = f8ad367e749435058f8df7c3961af8cf8b7dfb95
diff --git a/suitesparse/files/SuiteSparse_config.mk b/suitesparse/files/SuiteSparse_config.mk
deleted file mode 100644
index 7098688afb..0000000000
--- a/suitesparse/files/SuiteSparse_config.mk
+++ /dev/null
@@ -1,397 +0,0 @@
-#===============================================================================
-# SuiteSparse_config.mk: common configuration file for the SuiteSparse
-#===============================================================================
-
-# This file contains all configuration settings for all packages authored or
-# co-authored by Tim Davis:
-#
-# Package Version Description
-# ------- ------- -----------
-# AMD 1.2 or later approximate minimum degree ordering
-# COLAMD 2.4 or later column approximate minimum degree ordering
-# CCOLAMD 1.0 or later constrained column approximate minimum degree ordering
-# CAMD any constrained approximate minimum degree ordering
-# UMFPACK 4.5 or later sparse LU factorization, with the BLAS
-# CHOLMOD any sparse Cholesky factorization, update/downdate
-# KLU 0.8 or later sparse LU factorization, BLAS-free
-# BTF 0.8 or later permutation to block triangular form
-# LDL 1.2 or later concise sparse LDL'
-# CXSparse any extended version of CSparse (int/long, real/complex)
-# SuiteSparseQR any sparse QR factorization
-# RBio 2.0 or later read/write sparse matrices in Rutherford-Boeing format
-#
-# By design, this file is NOT included in the CSparse makefile.
-# That package is fully stand-alone. CSparse is primarily for teaching;
-# production code should use CXSparse.
-#
-# The SuiteSparse_config directory and the above packages should all appear in
-# a single directory, in order for the Makefile's within each package to find
-# this file.
-#
-# To enable an option of the form "# OPTION = ...", edit this file and
-# delete the "#" in the first column of the option you wish to use, or
-# simply override variables on the "make" command line, e.g.
-#
-# make PREFIX=/opt/local LOCALBASE=/opt/local CFLAGS="-O3 -Wall"
-#
-# The use of METIS 4.0.1 is optional. To exclude METIS, you must compile with
-# CHOLMOD_CONFIG set to -DNPARTITION. See below for details. However, if you
-# do not have a metis-4.0 directory inside the SuiteSparse directory, the
-# */Makefile's that optionally rely on METIS will automatically detect this
-# and compile without METIS.
-
-#------------------------------------------------------------------------------
-# Generic configuration
-#------------------------------------------------------------------------------
-
-# Using standard definitions from the make environment, typically:
-#
-# CC cc C compiler
-# CXX g++ C++ compiler
-# CFLAGS [ ] flags for C
-# CXXFLAGS [ ] flags for C++ compiler
-# CPPFLAGS [ ] flags for C and C++ preprocessor
-# TARGET_ARCH [ ] target architecture
-# FFLAGS [ ] flags for Fortran compiler
-# RM rm -f delete a file
-# AR ar create a static *.a library archive
-# ARFLAGS rv flags for ar
-# MAKE make make itself (sometimes called gmake)
-#
-# You can redefine them here, but by default they are used from the
-# default make environment.
-
-# C and C++ compiler flags. The first three are standard for *.c and *.cpp
-# Add -DNTIMER if you do use any timing routines (otherwise -lrt is required).
-# CF = $(CFLAGS) $(CXXFLAGS) $(TARGET_ARCH) -O3 -fexceptions -fPIC -DNTIMER
-CF ?= $(CPPFLAGS) $(CFLAGS) $(CXXFLAGS) $(TARGET_ARCH) -O3 -fexceptions -fPIC
-
-# ranlib, and ar, for generating libraries. If you don't need ranlib,
-# just change it to RANLAB = echo
-RANLIB ?= ranlib
-ARCHIVE ?= $(AR) $(ARFLAGS)
-
-# copy and delete a file
-CP ?= cp -f
-MV ?= mv -f
-
-# Fortran compiler (not required for 'make' or 'make library')
-F77FLAGS ?= -O ${PICFLAG}
-F77LIB ?=
-
-# C and Fortran libraries. Remove -lrt if you don't have it.
-# LIB ?= -lm -lrt
-LIB ?= -lm
-# Using the following requires CF = ... -DNTIMER on POSIX C systems.
-# LIB = -lm
-
-# For "make install"
-LOCALBASE ?= /usr/local
-PREFIX ?= ${LOCALBASE}
-INSTALL_LIB ?= ${PREFIX}/lib
-INSTALL_INCLUDE ?= ${PREFIX}/include
-
-# Which version of MAKE you are using (default is "make")
-MAKE ?= make
-
-#------------------------------------------------------------------------------
-# BLAS and LAPACK configuration:
-#------------------------------------------------------------------------------
-
-# UMFPACK and CHOLMOD both require the BLAS. CHOLMOD also requires LAPACK.
-# See Kazushige Goto's BLAS at http://www.cs.utexas.edu/users/flame/goto/ or
-# http://www.tacc.utexas.edu/~kgoto/ for the best BLAS to use with CHOLMOD.
-# LAPACK is at http://www.netlib.org/lapack/ . You can use the standard
-# Fortran LAPACK along with Goto's BLAS to obtain very good performance.
-# CHOLMOD gets a peak numeric factorization rate of 3.6 Gflops on a 3.2 GHz
-# Pentium 4 (512K cache, 4GB main memory) with the Goto BLAS, and 6 Gflops
-# on a 2.5Ghz dual-core AMD Opteron.
-
-# These settings will probably not work, since there is no fixed convention for
-# naming the BLAS and LAPACK library (*.a or *.so) files.
-
-# This is probably slow ... it might connect to the Standard Reference BLAS:
-BLAS ?= -L${LOCALBASE}/lib -lblas
-LAPACK ?= -L${LOCALBASE}/lib -llapack
-
-# NOTE: this next option for the "Goto BLAS" has nothing to do with a "goto"
-# statement. Rather, the Goto BLAS is written by Dr. Kazushige Goto.
-# Using the Goto BLAS:
-# BLAS = -lgoto -lgfortran -lgfortranbegin
-# BLAS = -lgoto2 -lgfortran -lgfortranbegin -lpthread
-
-# Using non-optimized versions:
-# BLAS = -lblas_plain -lgfortran -lgfortranbegin
-# LAPACK = -llapack_plain
-
-# BLAS = -lblas_plain -lgfortran -lgfortranbegin
-# LAPACK = -llapack
-
-# The BLAS might not contain xerbla, an error-handling routine for LAPACK and
-# the BLAS. Also, the standard xerbla requires the Fortran I/O library, and
-# stops the application program if an error occurs. A C version of xerbla
-# distributed with this software (SuiteSparse_config/xerbla/libcerbla.a)
-# includes a Fortran-callable xerbla routine that prints nothing and does not
-# stop the application program. This is optional.
-
-XERBLA ?= ../../SuiteSparse_config/xerbla/libcerbla.a
-
-# If you wish to use the XERBLA in LAPACK and/or the BLAS instead,
-# use this option:
-# XERBLA =
-
-# If you wish to use the Fortran SuiteSparse_config/xerbla/xerbla.f instead,
-# use this:
-
-# XERBLA = ../../SuiteSparse_config/xerbla/libxerbla.a
-
-#------------------------------------------------------------------------------
-# GPU configuration for CHOLMOD, using the CUDA BLAS
-#------------------------------------------------------------------------------
-
-# no cuda
-GPU_BLAS_PATH ?=
-GPU_CONFIG ?=
-
-# with cuda BLAS acceleration for CHOLMOD
-# GPU_BLAS_PATH=/Users/bacon/Pkgsrc/pkg-1/cuda
-# GPU_CONFIG=-DGPU_BLAS -I$(GPU_BLAS_PATH)/include
-
-#------------------------------------------------------------------------------
-# METIS, optionally used by CHOLMOD
-#------------------------------------------------------------------------------
-
-# If you do not have METIS, or do not wish to use it in CHOLMOD, you must
-# compile CHOLMOD with the -DNPARTITION flag.
-
-# The path is relative to where it is used, in CHOLMOD/Lib, CHOLMOD/MATLAB, etc.
-# You may wish to use an absolute path. METIS is optional. Compile
-# CHOLMOD with -DNPARTITION if you do not wish to use METIS.
-METIS_PATH ?=
-METIS ?=
-
-#------------------------------------------------------------------------------
-# UMFPACK configuration:
-#------------------------------------------------------------------------------
-
-# Configuration flags for UMFPACK. See UMFPACK/Source/umf_config.h for details.
-#
-# -DNBLAS do not use the BLAS. UMFPACK will be very slow.
-# -D'LONGBLAS=long' or -DLONGBLAS='long long' defines the integers used by
-# LAPACK and the BLAS (defaults to 'int')
-# -DNSUNPERF do not use the Sun Perf. Library (default is use it on Solaris)
-# -DNRECIPROCAL do not multiply by the reciprocal
-# -DNO_DIVIDE_BY_ZERO do not divide by zero
-# -DNCHOLMOD do not use CHOLMOD as a ordering method. If -DNCHOLMOD is
-# included in UMFPACK_CONFIG, then UMFPACK does not rely on
-# CHOLMOD, CAMD, CCOLAMD, COLAMD, and METIS.
-
-UMFPACK_CONFIG ?=
-
-# uncomment this line to compile UMFPACK without CHOLMOD:
-# UMFPACK_CONFIG = -DNCHOLMOD
-
-#------------------------------------------------------------------------------
-# CHOLMOD configuration
-#------------------------------------------------------------------------------
-
-# CHOLMOD Library Modules, which appear in libcholmod.a:
-# Core requires: none
-# Check requires: Core
-# Cholesky requires: Core, AMD, COLAMD. optional: Partition, Supernodal
-# MatrixOps requires: Core
-# Modify requires: Core
-# Partition requires: Core, CCOLAMD, METIS. optional: Cholesky
-# Supernodal requires: Core, BLAS, LAPACK
-#
-# CHOLMOD test/demo Modules (all are GNU GPL, do not appear in libcholmod.a):
-# Tcov requires: Core, Check, Cholesky, MatrixOps, Modify, Supernodal
-# optional: Partition
-# Valgrind same as Tcov
-# Demo requires: Core, Check, Cholesky, MatrixOps, Supernodal
-# optional: Partition
-#
-# Configuration flags:
-# -DNCHECK do not include the Check module. License GNU LGPL
-# -DNCHOLESKY do not include the Cholesky module. License GNU LGPL
-# -DNPARTITION do not include the Partition module. License GNU LGPL
-# also do not include METIS.
-# -DNGPL do not include any GNU GPL Modules in the CHOLMOD library:
-# -DNMATRIXOPS do not include the MatrixOps module. License GNU GPL
-# -DNMODIFY do not include the Modify module. License GNU GPL
-# -DNSUPERNODAL do not include the Supernodal module. License GNU GPL
-#
-# -DNPRINT do not print anything.
-# -D'LONGBLAS=long' or -DLONGBLAS='long long' defines the integers used by
-# LAPACK and the BLAS (defaults to 'int')
-# -DNSUNPERF for Solaris only. If defined, do not use the Sun
-# Performance Library
-
-CHOLMOD_CONFIG ?= -DNPARTITION
-
-# uncomment this line to compile CHOLMOD without METIS:
-# CHOLMOD_CONFIG = -DNPARTITION
-
-#------------------------------------------------------------------------------
-# SuiteSparseQR configuration:
-#------------------------------------------------------------------------------
-
-# The SuiteSparseQR library can be compiled with the following options:
-#
-# -DNPARTITION do not include the CHOLMOD partition module
-# -DNEXPERT do not include the functions in SuiteSparseQR_expert.cpp
-# -DHAVE_TBB enable the use of Intel's Threading Building Blocks (TBB)
-
-# default, without timing, without TBB:
-SPQR_CONFIG ?= -DNPARTITION
-# with TBB:
-# SPQR_CONFIG = -DHAVE_TBB
-
-# This is needed for IBM AIX: (but not for and C codes, just C++)
-# SPQR_CONFIG = -DBLAS_NO_UNDERSCORE
-
-# with TBB, you must select this:
-# TBB = -ltbb
-# without TBB:
-TBB ?=
-
-#------------------------------------------------------------------------------
-# Linux
-#------------------------------------------------------------------------------
-
-# Using default compilers:
-# CC = gcc
-# CF = $(CFLAGS) -O3 -fexceptions
-
-# alternatives:
-# CF = $(CFLAGS) -g -fexceptions \
- -Wall -W -Wshadow -Wmissing-prototypes -Wstrict-prototypes \
- -Wredundant-decls -Wnested-externs -Wdisabled-optimization -ansi \
- -funit-at-a-time
-# CF = $(CFLAGS) -O3 -fexceptions \
- -Wall -W -Werror -Wshadow -Wmissing-prototypes -Wstrict-prototypes \
- -Wredundant-decls -Wnested-externs -Wdisabled-optimization -ansi
-# CF = $(CFLAGS) -O3 -fexceptions -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE
-# CF = $(CFLAGS) -O3
-# CF = $(CFLAGS) -O3 -g -fexceptions
-# CF = $(CFLAGS) -g -fexceptions \
- -Wall -W -Wshadow \
- -Wredundant-decls -Wdisabled-optimization -ansi
-
-# consider:
-# -fforce-addr -fmove-all-movables -freduce-all-givs -ftsp-ordering
-# -frename-registers -ffast-math -funroll-loops
-
-# Using the Goto BLAS:
-# BLAS = -lgoto -lfrtbegin -lg2c $(XERBLA) -lpthread
-
-# Using Intel's icc and ifort compilers:
-# (does not work for mexFunctions unless you add a mexopts.sh file)
-# F77 = ifort
-# CC = icc
-# CF = $(CFLAGS) -O3 -xN -vec_report=0
-# CF = $(CFLAGS) -g
-
-# 64bit:
-# F77FLAGS = -O -m64
-# CF = $(CFLAGS) -O3 -fexceptions -m64
-# BLAS = -lgoto64 -lfrtbegin -lg2c -lpthread $(XERBLA)
-# LAPACK = -llapack64
-
-# SUSE Linux 10.1, AMD Opteron, with GOTO Blas
-# F77 = gfortran
-# BLAS = -lgoto_opteron64 -lgfortran
-
-# SUSE Linux 10.1, Intel Pentium, with GOTO Blas
-# F77 = gfortran
-# BLAS = -lgoto -lgfortran
-
-#------------------------------------------------------------------------------
-# Mac
-#------------------------------------------------------------------------------
-
-# As recommended by macports, http://suitesparse.darwinports.com/
-# I've tested them myself on Mac OSX 10.6.1 and 10.6.8 (Snow Leopard),
-# on my MacBook Air, and they work fine.
-
-# F77 = gfortran
-# CF = $(CFLAGS) -O3 -fno-common -fexceptions -DNTIMER
-# BLAS = -framework Accelerate
-# LAPACK = -framework Accelerate
-# LIB = -lm
-
-#------------------------------------------------------------------------------
-# Solaris
-#------------------------------------------------------------------------------
-
-# 32-bit
-# CF = $(CFLAGS) -KPIC -dalign -xc99=%none -Xc -xlibmieee -xO5 -xlibmil -m32
-
-# 64-bit
-# CF = $(CFLAGS) -fast -KPIC -xc99=%none -xlibmieee -xlibmil -m64 -Xc
-
-# FFLAGS = -fast -KPIC -dalign -xlibmil -m64
-
-# The Sun Performance Library includes both LAPACK and the BLAS:
-# BLAS = -xlic_lib=sunperf
-# LAPACK =
-
-
-#------------------------------------------------------------------------------
-# Compaq Alpha
-#------------------------------------------------------------------------------
-
-# 64-bit mode only
-# CF = $(CFLAGS) -O2 -std1
-# BLAS = -ldxml
-# LAPACK =
-
-#------------------------------------------------------------------------------
-# IBM RS 6000
-#------------------------------------------------------------------------------
-
-# BLAS = -lessl
-# LAPACK =
-
-# 32-bit mode:
-# CF = $(CFLAGS) -O4 -qipa -qmaxmem=16384 -qproto
-# F77FLAGS = -O4 -qipa -qmaxmem=16384
-
-# 64-bit mode:
-# CF = $(CFLAGS) -O4 -qipa -qmaxmem=16384 -q64 -qproto
-# F77FLAGS = -O4 -qipa -qmaxmem=16384 -q64
-
-#------------------------------------------------------------------------------
-# SGI IRIX
-#------------------------------------------------------------------------------
-
-# BLAS = -lscsl
-# LAPACK =
-
-# 32-bit mode
-# CF = $(CFLAGS) -O
-
-# 64-bit mode (32 bit int's and 64-bit long's):
-# CF = $(CFLAGS) -64
-# F77FLAGS = -64
-
-# SGI doesn't have ranlib
-# RANLIB = echo
-
-#------------------------------------------------------------------------------
-# AMD Opteron (64 bit)
-#------------------------------------------------------------------------------
-
-# BLAS = -lgoto_opteron64 -lg2c
-# LAPACK = -llapack_opteron64
-
-# SUSE Linux 10.1, AMD Opteron
-# F77 = gfortran
-# BLAS = -lgoto_opteron64 -lgfortran
-# LAPACK = -llapack_opteron64
-
-#------------------------------------------------------------------------------
-# remove object files and profile output
-#------------------------------------------------------------------------------
-
-CLEAN = *.o *.obj *.ln *.bb *.bbg *.da *.tcov *.gcov gmon.out *.bak *.d *.gcda *.gcno
diff --git a/suitesparse/patches/patch-GraphBLAS_CMakeLists.txt b/suitesparse/patches/patch-GraphBLAS_CMakeLists.txt
deleted file mode 100644
index 82d3eff9a8..0000000000
--- a/suitesparse/patches/patch-GraphBLAS_CMakeLists.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-$NetBSD: patch-GraphBLAS_CMakeLists.txt,v 1.1 2024/06/14 13:19:54 ktnb Exp $
-
-cpu_features doesn't appear to work properly on NetBSD
-
---- GraphBLAS/CMakeLists.txt.orig 2024-06-03 15:50:22.420795494 +0000
-+++ GraphBLAS/CMakeLists.txt
-@@ -125,7 +125,7 @@ endif ( )
- # find cpu_features
- #-------------------------------------------------------------------------------
-
--if ( NOT GBNCPUFEAT )
-+if ( NOT GBNCPUFEAT AND NOT CMAKE_SYSTEM_NAME STREQUAL "NetBSD" )
- # default: enable Google's cpu_features package
- message ( STATUS "cpu_features (by google.com): enabled " )
- include_directories ( "cpu_features/include" "cpu_features" "cpu_features/src" "cpu_features/include/internal" )
diff --git a/suitesparse/patches/patch-ParU_Source_paru__init__rowFronts.cpp b/suitesparse/patches/patch-ParU_Source_paru__init__rowFronts.cpp
deleted file mode 100644
index 5cfedee934..0000000000
--- a/suitesparse/patches/patch-ParU_Source_paru__init__rowFronts.cpp
+++ /dev/null
@@ -1,25 +0,0 @@
-$NetBSD$
-
-# Fix build on Alma (RHEL) 8
-
---- ParU/Source/paru_init_rowFronts.cpp.orig 2024-08-24 17:13:32.000000000 +0000
-+++ ParU/Source/paru_init_rowFronts.cpp
-@@ -34,7 +34,17 @@ ParU_Info paru_init_rowFronts
- ParU_Numeric *Num_handle,
- // inputs, not modified:
- cholmod_sparse *A,
-- const ParU_Symbolic Sym // symbolic analysis
-+ // gcc on Alma 8 actually errors out on line 443:
-+ // error: "Sym" is predetermined "shared" for "shared"
-+ // It's dumb to error out when the programmer just restates a default,
-+ // but some extant versions of gcc do this, while others (and clang)
-+ // error out if Sym is not included in the shared list. Removing
-+ // default(none) is risky, as behavior may differ with different
-+ // compilers. Since the code is confirmed to build on most platforms
-+ // with const Sym, we know that nothing is trying to modify Sym after,
-+ // so removing the const should not cause any problems.
-+ // const ParU_Symbolic Sym // symbolic analysis
-+ ParU_Symbolic Sym // symbolic analysis
- )
- {
-
diff --git a/suitesparse/patches/patch-SPQR_Source_spqr__factorize.cpp b/suitesparse/patches/patch-SPQR_Source_spqr__factorize.cpp
deleted file mode 100644
index 772645ee41..0000000000
--- a/suitesparse/patches/patch-SPQR_Source_spqr__factorize.cpp
+++ /dev/null
@@ -1,14 +0,0 @@
-$NetBSD: patch-SPQR_Source_spqr__factorize.cpp,v 1.1 2024/06/14 13:19:54 ktnb Exp $
-
-Upstream bug, should include string
-
---- SPQR/Source/spqr_factorize.cpp.orig 2024-03-26 21:14:00.000000000 +0000
-+++ SPQR/Source/spqr_factorize.cpp
-@@ -36,6 +36,7 @@
- // =============================================================================
-
- #include "spqr.hpp"
-+#include <string>
-
- #define FCHUNK 32 // FUTURE: make a parameter; Householder block size
-
Home |
Main Index |
Thread Index |
Old Index