pkgsrc-WIP-changes archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
groku: remove
Module Name: pkgsrc-wip
Committed By: miwarin <miwarin%gmail.com@localhost>
Pushed By: miwarin
Date: Sat May 26 19:49:51 2018 +0900
Changeset: 65c274ea410f4dc8307cb13a968b4a81230384f2
Modified Files:
Makefile
Removed Files:
groku/DESCR
groku/MESSAGE
groku/Makefile
groku/PLIST
groku/distinfo
groku/files/INSTALL
groku/files/depcomp
groku/files/install-sh
groku/files/missing
groku/patches/patch-aa
groku/patches/patch-ab
Log Message:
groku: remove
MASTER_SITES not found
To see a diff of this commit:
https://wip.pkgsrc.org/cgi-bin/gitweb.cgi?p=pkgsrc-wip.git;a=commitdiff;h=65c274ea410f4dc8307cb13a968b4a81230384f2
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
diffstat:
Makefile | 1 -
groku/DESCR | 22 ---
groku/MESSAGE | 13 --
groku/Makefile | 35 ----
groku/PLIST | 5 -
groku/distinfo | 7 -
groku/files/INSTALL | 124 ------------
groku/files/depcomp | 522 -------------------------------------------------
groku/files/install-sh | 322 ------------------------------
groku/files/missing | 353 ---------------------------------
groku/patches/patch-aa | 12 --
groku/patches/patch-ab | 11 --
12 files changed, 1427 deletions(-)
diffs:
diff --git a/Makefile b/Makefile
index 86d87ef97b..48da0600c8 100644
--- a/Makefile
+++ b/Makefile
@@ -1055,7 +1055,6 @@ SUBDIR+= gretl
SUBDIR+= greybird-theme
SUBDIR+= grilo-plugins
SUBDIR+= grisbi
-SUBDIR+= groku
SUBDIR+= groovy
SUBDIR+= grpc-java
SUBDIR+= grsync
diff --git a/groku/DESCR b/groku/DESCR
deleted file mode 100644
index 9ce0abe751..0000000000
--- a/groku/DESCR
+++ /dev/null
@@ -1,22 +0,0 @@
-Groku is a Gnome Application for controlling your Roku Soundbridge (tm)
-device. Groku can control many aspects of your Roku Soundbridge over
-a network connection.
-
- Currently, Groku can control your Soundbridge, and make it do the
- following things:
-
- * Connect to a media server
- * Connect and play Internet Radio Stations
- * List Containers(Folders)/Songs on the media server
- * Manage the Soundbridge's Now Playing Play-list
- * Add to Play-list
- * Remove from Play-list
- * Full transport Capabilities (In near-real-time)
- * Play, Pause, Stop, Previous, Next
- * Shuffle
- * Repeat (Repeat One, Repeat All)
- * Volume Control
- * Time Display
- * Remote Soundbridge Display
- Shows you what's currently being displayed on your Soundbridge
- in near-real-time
diff --git a/groku/MESSAGE b/groku/MESSAGE
deleted file mode 100644
index 873b72349e..0000000000
--- a/groku/MESSAGE
+++ /dev/null
@@ -1,13 +0,0 @@
-===========================================================================
-$NetBSD: MESSAGE,v 1.1 2007/01/01 01:11:21 mwicks Exp $
-
-This application uses gnome icons. If you plan to run groku within KDE,
-you may want to add the following line to one of the gtkrc files in the
-search path (e.g., ~user/.gtkrc.mine):
-
-gtk-fallback-icon-theme="gnome"
-
-Without specifying gnome as the fallback icon theme, some of the icons
-will be missing.
-
-===========================================================================
diff --git a/groku/Makefile b/groku/Makefile
deleted file mode 100644
index 7057ae0435..0000000000
--- a/groku/Makefile
+++ /dev/null
@@ -1,35 +0,0 @@
-# $NetBSD: Makefile,v 1.10 2012/11/13 20:09:31 othyro Exp $
-#
-
-DISTNAME= groku-0.1
-PKGREVISION= 7
-CATEGORIES= audio
-MASTER_SITES= http://digitalssg.net/debian/
-
-MAINTAINER= mwicks%kettering.edu@localhost
-HOMEPAGE= http://groku.digitalssg.net/
-COMMENT= Groku is a GTK for controlling your Roku Soundbridge (tm)
-
-GNU_CONFIGURE= yes
-USE_TOOLS+= pkg-config
-USE_LANGUAGES+= c c++
-CFLAGS+= -g
-
-pre-configure:
- ${RM} -f ${WRKSRC}/install-sh ${WRKSRC}/depcomp ${WRKSRC}/missing ${WRKSRC}/INSTALL
- ${CP} files/install-sh ${WRKSRC}/install-sh
- ${CP} files/depcomp ${WRKSRC}/depcomp
- ${CP} files/missing ${WRKSRC}/missing
- ${CP} files/INSTALL ${WRKSRC}/INSTALL
-
-pre-install:
- ${INSTALL_DATA_DIR} ${DESTDIR}${PREFIX}/share/groku
- ${LN} -s ${DESTDIR}${PREFIX}/share/pixmaps/groku.png ${DESTDIR}${PREFIX}/share/groku/groku-logo.png
-
-
-.include "../../sysutils/desktop-file-utils/desktopdb.mk"
-.include "../../x11/libX11/buildlink3.mk"
-.include "../../devel/libgnomeui/buildlink3.mk"
-.include "../../devel/GConf/buildlink3.mk"
-.include "../../devel/libglade/buildlink3.mk"
-.include "../../mk/bsd.pkg.mk"
diff --git a/groku/PLIST b/groku/PLIST
deleted file mode 100644
index 850c47eae0..0000000000
--- a/groku/PLIST
+++ /dev/null
@@ -1,5 +0,0 @@
-@comment $NetBSD: PLIST,v 1.2 2009/10/11 10:44:41 thomasklausner Exp $
-bin/groku
-share/applications/groku.desktop
-share/groku/groku.glade
-share/pixmaps/groku.png
diff --git a/groku/distinfo b/groku/distinfo
deleted file mode 100644
index eea2eaf02a..0000000000
--- a/groku/distinfo
+++ /dev/null
@@ -1,7 +0,0 @@
-$NetBSD: distinfo,v 1.2 2011/11/09 11:21:18 noud4 Exp $
-
-SHA1 (groku-0.1.tar.gz) = cf931f2f563c7e98a33c23882e4bfebd20bcc6fc
-RMD160 (groku-0.1.tar.gz) = 6309029edd44e3d934d73bd000ae004269a280da
-Size (groku-0.1.tar.gz) = 159220 bytes
-SHA1 (patch-aa) = 36807fa8af7c3cb59f41911982ceb6d1c8178a52
-SHA1 (patch-ab) = 03fb46e698929850362804601fc858a63f3c85dd
diff --git a/groku/files/INSTALL b/groku/files/INSTALL
deleted file mode 100644
index 273fe02f45..0000000000
--- a/groku/files/INSTALL
+++ /dev/null
@@ -1,124 +0,0 @@
- am-utils 6.1 compatibility list
-
-For each system, list if it autoconfigures, compiles, or runs. Fill in
-email id of person who confirms the fact. A missing entry means unverified.
-A 'no' or 'X' means verified broken or nonexistent (static library).
-
-SYSTEM CONFIG COMPILE RUN SHLIB AUTOFS
-========================= ======= ======= ======= ======= ======
-alpha-dec-osf4.0f ro ro ro - -
-alpha-dec-osf5.1 ro ro ro - -
-alpha-unknown-linux-gentoo1.4.16 ezk ezk ezk ezk -
-alphaev56-dec-osf4.0f ezk ezk ezk ezk -
-i386-apple-darwin6.0 ezk ezk ezk ezk -
-i386-pc-bsdi2.1 ion ion ion ion[X] ion[X]
-i386-pc-linux-deb3.0 ezk ezk ezk ezk -
-i386-pc-linux-deb3.1 ezk ezk ezk ezk -
-i386-pc-linux-fc1 ezk ezk ezk ezk -
-i386-pc-linux-fc2 ezk ezk ezk ezk -
-i386-pc-linux-fc3 ezk ezk ezk ezk -
-i386-pc-linux-fc4 ezk ezk ezk ezk -
-i386-pc-linux-gentoo1.4.16 ezk ezk ezk ezk -
-i386-pc-linux-rh6.2 ion ion ion ion ion
-i386-pc-linux-rh7.1 ion ion ion ion ion
-i386-pc-linux-rh7.2 ion ion ion ion ion
-i386-pc-linux-rh7.3 ion ion ion ion ion
-i386-pc-linux-rh8.0 ezk ezk ezk ezk -
-i386-pc-linux-rh9 ion ion ion ion ion
-i386-pc-linux-rhel3 ezk ezk ezk ezk -
-i386-pc-linux-rhel4 ezk ezk ezk ezk -
-i386-pc-linux-suse8.2 ezk ezk ezk ezk -
-i386-pc-linux-suse9.1 ezk ezk ezk ezk -
-i386-pc-linux-suse9.2 ezk ezk ezk ezk -
-i386-pc-linux-suse9.3 ezk ezk ezk ezk -
-i386-pc-solaris2.10 ro ro ro - -
-i386-pc-solaris2.9 ro ro ro - -
-i386-unknown-freebsd4.10 ezk ezk ezk ezk -
-i386-unknown-freebsd4.11 ezk ezk ezk ezk -
-i386-unknown-freebsd4.8 ezk ezk ezk ezk -
-i386-unknown-freebsd4.9 ezk ezk ezk ezk -
-i386-unknown-freebsd5.0 ezk ezk - ezk -
-i386-unknown-freebsd5.1 ezk ezk ezk ezk -
-i386-unknown-freebsd5.2 ezk ezk ezk ezk -
-i386-unknown-freebsd5.2.1 ezk ezk ezk ezk -
-i386-unknown-freebsd5.3 ezk ezk ezk ezk -
-i386-unknown-freebsd5.4 ezk ezk ezk ezk -
-i386-unknown-freebsd6 (BETA5) ezk ezk ezk ezk -
-i386-unknown-netbsd1.6A ezk ezk ezk ezk -
-i386-unknown-netbsdelf1.6.1 ezk ezk ezk ezk -
-i386-unknown-netbsdelf1.6.2 ezk ezk ezk ezk -
-i386-unknown-netbsdelf2.0 ezk ezk ezk ezk -
-i386-unknown-netbsdelf2.0.2 ezk ezk ezk ezk -
-i386-unknown-netbsdelf3.0 ezk ezk ezk ezk -
-i386-unknown-openbsd3.3 ezk ezk ezk ezk -
-i386-unknown-openbsd3.6 ezk ezk ezk ezk -
-i386-unknown-openbsd3.7 ezk ezk ezk ezk -
-i686-apple-darwin6.6 ezk ezk ezk ezk -
-ia64-hp-hpux11.20 ezk ezk ezk ezk -
-ia64-unknown-linux-rh2.1AS ezk ezk - ezk -
-ia64-unknown-linux-rh2.1AW ezk ezk ezk ezk -
-ia64-unknown-linux-rhel4 ezk ezk ezk ezk -
-mips-sgi-irix6.2 ro ro ro - -[3]
-mips-sgi-irix6.5 ro ro ro - -[3]
-mips-unknown-linux-gentoo1.4.16 ezk ezk ezk ezk -
-mipsel-unknown-linux-rhPS2 ezk ezk ezk ezk -
-powerpc-apple-darwin7.6.0 ezk ezk ezk ezk -
-powerpc-apple-darwin7.7.0 ezk ezk ezk ezk -
-powerpc-apple-darwin7.8.0 ezk ezk ezk ezk -
-powerpc-apple-darwin7.9.0 ezk ezk ezk ezk -
-powerpc-apple-darwin8.2.0 ezk ezk ezk ezk -
-powerpc-ibm-aix5.1.0.0 ion ion ion ion[X] ion[1,2]
-powerpc-ibm-aix5.2.0.0 ezk ezk ezk ezk -
-powerpc-ibm-aix5.3.0.0 ezk ezk ezk ezk -
-powerpc-unknown-linux-yellowdog2.3 ezk ezk ezk ezk -
-sparc-sun-solaris2.10 ro ro ro - -
-sparc-sun-solaris2.5.1 ion ion ion ion ion[1]
-sparc-sun-solaris2.6 ion ion ion ion ion
-sparc-sun-solaris2.7 ion ion ion ion ion
-sparc-sun-solaris2.8 ion ion ion ion ion
-sparc-sun-solaris2.9 ro ro ro - -
-sparc-unknown-linux-rh62 ion ion ion ion ion
-sparc64-unknown-linux-aurora10 ion ion ion ion ion
-sparc64-unknown-linux-deb3.0 ezk ezk ezk ezk -
-sparc64-unknown-linux-gentoo1.4.16 ezk ezk ezk ezk -
-sparc64-unknown-linux-rh62 ion ion ion ion ion
-sparc64-unknown-linux-suse7.3 ezk ezk - ezk -
-x86_64-unknown-linux-rh2.9.5AS ezk ezk ezk ezk -
-x86_64-unknown-linux-rh3.0.0AS ion ion ion ion ion
-
-
-EMAIL ID LEGEND:
-
-bking: Bevis R W King <B.King%ee.surrey.ac.uk@localhost>
-dsr: Dan Riley <dsr%mail.lns.cornell.edu@localhost>
-ezk: Erez Zadok <ezk%cs.columbia.edu@localhost>
-finkel: Raphael Finkel <raphael%cs.uky.edu@localhost>
-ion: Ion Badulescu <ion%cs.columbia.edu@localhost>
-jose: Jose Nazario <jose%biocserver.BIOC.CWRU.Edu@localhost>
-nrh: Nick Hall <nrh%dcs.ed.ac.uk@localhost>
-ro: Rainer Orth <ro%TechFak.Uni-Bielefeld.DE@localhost>
-stolke: Andreas Stolcke <stolcke%speech.sri.com@localhost>
-wpaul: Bill Paul <wpaul%ctr.columbia.edu@localhost>
-
-
-FOOTNOTES:
-
-[1] Due to limitations in the Sun autofs v1 implementation, some amd features
-cannot be properly supported. More precisely, trying to access a link mount
-pointing to another amd entry will result in failure and/or deadlock.
-Ordinary nfs and link mounts work well, however.
-
-[2] AIX autofs appears to be a variant of the Sun autofs v1 protocol, but
-IBM don't provide any sort of documentation or even header files from it.
-It is currently unsupported; we may add some experimental support for it at
-some point, though it won't be pretty. Assistance from IBM-ers would be
-highly appreciated, hint hint.
-
-[3] IRIX 6 autofs uses the Sun autofs v1 protocol, too. The header files
-are part of the onc3_eoe.sw.autofs (IRIX 6.2) or nfs.sw.autofs (IRIX 6.5)
-package, which may not be installed. The autofs code is known to compile,
-but hasn't been run yet. SGI's autofsd uses a barely documented system
-call, syssgi(SGI_AUTOFS_SYS, ...), which may be required to get working
-autofs support. Additional help from SGI would be highly appreciated.
-
-Erez & Ion
diff --git a/groku/files/depcomp b/groku/files/depcomp
deleted file mode 100755
index 11e2d3bfe1..0000000000
--- a/groku/files/depcomp
+++ /dev/null
@@ -1,522 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2004-05-31.23
-
-# Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva%dcc.unicamp.br@localhost>.
-
-case $1 in
- '')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by `PROGRAMS ARGS'.
- object Object file output by `PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputing dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake%gnu.org@localhost>.
-EOF
- exit 0
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit 0
- ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> $depfile
- echo >> $depfile
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts `$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
- stat=$?
-
- if test -f "$tmpdepfile"; then :
- else
- stripped=`echo "$stripped" | sed 's,^.*/,,'`
- tmpdepfile="$stripped.u"
- fi
-
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
-
- if test -f "$tmpdepfile"; then
- outname="$stripped.o"
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-icc)
- # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want:
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using \ :
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
-
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # Dependencies are output in .lo.d with libtool 1.4.
- # With libtool 1.5 they are output both in $dir.libs/$base.o.d
- # and in $dir.libs/$base.o.d and $dir$base.o.d. We process the
- # latter, because the former will be cleaned when $dir.libs is
- # erased.
- tmpdepfile1="$dir.libs/$base.lo.d"
- tmpdepfile2="$dir$base.o.d"
- tmpdepfile3="$dir.libs/$base.d"
- "$@" -Wc,-MD
- else
- tmpdepfile1="$dir$base.o.d"
- tmpdepfile2="$dir$base.d"
- tmpdepfile3="$dir$base.d"
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- if test -f "$tmpdepfile1"; then
- tmpdepfile="$tmpdepfile1"
- elif test -f "$tmpdepfile2"; then
- tmpdepfile="$tmpdepfile2"
- else
- tmpdepfile="$tmpdepfile3"
- fi
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for `:'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
- "$@" $dashmflag |
- sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- "$@" || exit $?
- IFS=" "
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/groku/files/install-sh b/groku/files/install-sh
deleted file mode 100755
index dd97db7aa1..0000000000
--- a/groku/files/install-sh
+++ /dev/null
@@ -1,322 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2004-09-10.20
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-chmodcmd="$chmodprog 0755"
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test -n "$1"; do
- case $1 in
- -c) shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- --help) echo "$usage"; exit 0;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t) dstarg=$2
- shift
- shift
- continue;;
-
- -T) no_target_directory=true
- shift
- continue;;
-
- --version) echo "$0 $scriptversion"; exit 0;;
-
- *) # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- test -n "$dir_arg$dstarg" && break
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
- break;;
- esac
-done
-
-if test -z "$1"; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src ;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- src=
-
- if test -d "$dst"; then
- mkdircmd=:
- chmodcmd=
- else
- mkdircmd=$mkdirprog
- fi
- else
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dstarg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dstarg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst ;;
- esac
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
- exit 1
- fi
- dst=$dst/`basename "$src"`
- fi
- fi
-
- # This sed command emulates the dirname command.
- dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
- # Make sure that the destination directory exists.
-
- # Skip lots of stat calls in the usual case.
- if test ! -d "$dstdir"; then
- defaultIFS='
- '
- IFS="${IFS-$defaultIFS}"
-
- oIFS=$IFS
- # Some sh's can't handle IFS=/ for some reason.
- IFS='%'
- set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
- IFS=$oIFS
-
- pathcomp=
-
- while test $# -ne 0 ; do
- pathcomp=$pathcomp$1
- shift
- if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp"
- # mkdir can fail with a `File exist' error in case several
- # install-sh are creating the directory concurrently. This
- # is OK.
- test -d "$pathcomp" || exit
- fi
- pathcomp=$pathcomp/
- done
- fi
-
- if test -n "$dir_arg"; then
- $doit $mkdircmd "$dst" \
- && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
- else
- dstfile=`basename "$dst"`
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
- trap '(exit $?); exit' 1 2 13 15
-
- # Copy the file name to the temp name.
- $doit $cpprog "$src" "$dsttmp" &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
-
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dstdir/$dstfile"; then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
- || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
- || {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
- (exit 1); exit
- }
- else
- :
- fi
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
- }
- }
- fi || { (exit 1); exit; }
-done
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
- (exit 0); exit
-}
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/groku/files/missing b/groku/files/missing
deleted file mode 100755
index 64b5f901dd..0000000000
--- a/groku/files/missing
+++ /dev/null
@@ -1,353 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2004-09-07.08
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
-# Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard%iro.umontreal.ca@localhost>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case "$1" in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake%gnu.org@localhost>."
- exit 0
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit 0
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
- lex|yacc)
- # Not GNU programs, they don't have --version.
- ;;
-
- tar)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case "$f" in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison|yacc)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if [ ! -f y.tab.h ]; then
- echo >y.tab.h
- fi
- if [ ! -f y.tab.c ]; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex|flex)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if [ ! -f lex.yy.c ]; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit 1
- fi
- ;;
-
- makeinfo)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
- fi
- touch $file
- ;;
-
- tar)
- shift
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case "$firstarg" in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case "$firstarg" in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/groku/patches/patch-aa b/groku/patches/patch-aa
deleted file mode 100644
index 70ca728adc..0000000000
--- a/groku/patches/patch-aa
+++ /dev/null
@@ -1,12 +0,0 @@
-$NetBSD: patch-aa,v 1.1 2007/01/30 02:03:09 mwicks Exp $
-
---- src/main.c.orig 2006-07-21 11:07:09.000000000 -0400
-+++ src/main.c
-@@ -65,6 +65,7 @@ int main(int argc, char *argv[])
- char *groku_glade_file;
- GConfClient *client;
-
-+ g_type_init();
- client = gconf_client_get_default();
- groku_glade_file = calloc(1, strlen(PACKAGE_DATA_DIR) + 20);
- snprintf(groku_glade_file, strlen(PACKAGE_DATA_DIR) + 20,
diff --git a/groku/patches/patch-ab b/groku/patches/patch-ab
deleted file mode 100644
index d7a310d8c2..0000000000
--- a/groku/patches/patch-ab
+++ /dev/null
@@ -1,11 +0,0 @@
---- groku.desktop.orig 2011-11-09 10:42:20.000000000 +0000
-+++ groku.desktop 2011-11-09 10:43:08.000000000 +0000
-@@ -2,7 +2,7 @@
- Encoding=UTF-8
- Name=groku
- Comment=Roku Soundbridge Control Software
--Exec=/usr/bin/groku
-+Exec=groku
- Terminal=false
- Icon=/usr/share/pixmaps/groku.png
- Type=Application
Home |
Main Index |
Thread Index |
Old Index