pkgsrc-WIP-changes archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
vcg: Reversing accidental commit.
Module Name: pkgsrc-wip
Committed By: Jason Bacon <jwbacon%tds.net@localhost>
Pushed By: outpaddling
Date: Thu Sep 8 16:48:49 2016 -0500
Changeset: 61165963bc2c0aefcad1f38f6388815e878a5c67
Removed Files:
vcg/DESCR
vcg/Makefile
vcg/PLIST
vcg/TODO
vcg/distinfo
vcg/files/conf
vcg/files/demo.csh
vcg/files/globals.h
vcg/files/tMakefile
vcg/patches/patch-aa
vcg/patches/patch-ab
vcg/patches/patch-ac
vcg/patches/patch-ad
vcg/patches/patch-ae
vcg/patches/patch-af
vcg/patches/patch-ag
vcg/patches/patch-ah
vcg/patches/patch-ai
vcg/patches/patch-aj
vcg/patches/patch-ak
vcg/patches/patch-al
vcg/patches/patch-am
vcg/patches/patch-an
vcg/patches/patch-ao
vcg/patches/patch-ap
vcg/patches/patch-aq
vcg/patches/patch-demo_animation1_c
vcg/patches/patch-demo_animation2_c
vcg/patches/patch-demo_animation3_c
vcg/patches/patch-demo_vcgcount_c
vcg/patches/patch-preconf_X11ccSunOS_conf
Log Message:
vcg: Reversing accidental commit.
To see a diff of this commit:
https://wip.pkgsrc.org/cgi-bin/gitweb.cgi?p=pkgsrc-wip.git;a=commitdiff;h=61165963bc2c0aefcad1f38f6388815e878a5c67
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
diffstat:
vcg/DESCR | 10 -
vcg/Makefile | 58 --
vcg/PLIST | 45 -
vcg/TODO | 1 -
vcg/distinfo | 28 -
vcg/files/conf | 38 -
vcg/files/demo.csh | 1454 -----------------------------
vcg/files/globals.h | 433 ---------
vcg/files/tMakefile | 378 --------
vcg/patches/patch-aa | 13 -
vcg/patches/patch-ab | 22 -
vcg/patches/patch-ac | 47 -
vcg/patches/patch-ad | 22 -
vcg/patches/patch-ae | 18 -
vcg/patches/patch-af | 13 -
vcg/patches/patch-ag | 13 -
vcg/patches/patch-ah | 13 -
vcg/patches/patch-ai | 13 -
vcg/patches/patch-aj | 22 -
vcg/patches/patch-ak | 13 -
vcg/patches/patch-al | 13 -
vcg/patches/patch-am | 13 -
vcg/patches/patch-an | 13 -
vcg/patches/patch-ao | 13 -
vcg/patches/patch-ap | 22 -
vcg/patches/patch-aq | 15 -
vcg/patches/patch-demo_animation1_c | 24 -
vcg/patches/patch-demo_animation2_c | 24 -
vcg/patches/patch-demo_animation3_c | 92 --
vcg/patches/patch-demo_vcgcount_c | 35 -
vcg/patches/patch-preconf_X11ccSunOS_conf | 16 -
31 files changed, 2934 deletions(-)
diffs:
diff --git a/vcg/DESCR b/vcg/DESCR
deleted file mode 100644
index 18ab0fc..0000000
--- a/vcg/DESCR
+++ /dev/null
@@ -1,10 +0,0 @@
-The VCG tool reads a textual and readable specification of a
-graph and visualizes the graph. If not all positions of
-nodes are fixed, the tool layouts the graph using several
-heuristics as reducing the number of crossings, minimizing
-the size of edges, centering of nodes. The specification
-language of the VCG tool is nearly compatible to GRL, the
-language of the edge tool, but contains many extensions. The
-VCG tool allows folding of dynamically or statically speci-
-fied regions of the graph. It uses colors and runs on
-X11. (An older version runs on Sunview).
diff --git a/vcg/Makefile b/vcg/Makefile
deleted file mode 100644
index 1c82880..0000000
--- a/vcg/Makefile
+++ /dev/null
@@ -1,58 +0,0 @@
-# $NetBSD: Makefile,v 1.20 2015/07/04 16:18:36 joerg Exp $
-
-DISTNAME= vcg.1.30.r3.17
-PKGNAME= vcg-1.30
-PKGREVISION= 1
-CATEGORIES= graphics
-MASTER_SITES= ftp://ftp.cs.uni-sb.de/pub/graphics/vcg/
-EXTRACT_SUFX= .tgz
-
-MAINTAINER= pkgsrc-users%NetBSD.org@localhost
-COMMENT= Visualization Tool for compiler graphs
-
-LICENSE= gnu-gpl-v2
-
-MAKE_JOBS_SAFE= no
-
-WRKSRC= ${WRKDIR}/vcg.1.30
-USE_TOOLS+= imake lex
-
-.include "../../mk/bsd.prefs.mk"
-
-.if ${OPSYS} == "Linux"
-SUBST_CLASSES+= install
-SUBST_STAGE.install= post-patch
-SUBST_SED.install= -e 's|/bin/install|/usr/bin/install|g'
-SUBST_FILES.install= ${WRKSRC}/preconf/X11cc${OPSYS}/conf
-
-SUBST_CLASSES+= sed
-SUBST_STAGE.sed= post-patch
-SUBST_SED.sed= -e 's|/usr/bin/sed|/bin/sed|g'
-SUBST_FILES.sed= ${WRKSRC}/preconf/X11cc${OPSYS}/conf
-SUBST_FILES.sed+= ${WRKSRC}/preconf/X11cc${OPSYS}/demo.csh
-SUBST_FILES.sed+= ${WRKSRC}/preconf/X11cc${OPSYS}/tMakefile
-
-SUBST_CLASSES+= touch
-SUBST_STAGE.touch= post-patch
-SUBST_SED.touch= -e 's|/usr/bin/touch|/bin/touch|g'
-SUBST_FILES.touch= ${WRKSRC}/preconf/X11cc${OPSYS}/conf
-SUBST_FILES.touch+= ${WRKSRC}/preconf/X11cc${OPSYS}/demo.csh
-SUBST_FILES.touch+= ${WRKSRC}/preconf/X11cc${OPSYS}/tMakefile
-
-.endif
-
-pre-patch:
- ${MKDIR} ${WRKSRC}/preconf/X11cc${OPSYS}
- ${CP} ${FILESDIR}/conf ${WRKSRC}/preconf/X11cc${OPSYS}
- ${CP} ${FILESDIR}/demo.csh ${WRKSRC}/preconf/X11cc${OPSYS}
- ${CP} ${FILESDIR}/globals.h ${WRKSRC}/preconf/X11cc${OPSYS}
- ${CP} ${FILESDIR}/tMakefile ${WRKSRC}/preconf/X11cc${OPSYS}
-
-INSTALLATION_DIRS+= share/doc/vcg share/examples/vcg
-
-post-install:
- ${INSTALL_DATA} ${WRKSRC}/doc/visual.ps ${DESTDIR}${PREFIX}/share/doc/vcg
- ${INSTALL_DATA} ${WRKSRC}/expl/*.vcg ${DESTDIR}${PREFIX}/share/examples/vcg
-
-.include "../../x11/libXext/buildlink3.mk"
-.include "../../mk/bsd.pkg.mk"
diff --git a/vcg/PLIST b/vcg/PLIST
deleted file mode 100644
index bb11fc8..0000000
--- a/vcg/PLIST
+++ /dev/null
@@ -1,45 +0,0 @@
-@comment $NetBSD: PLIST,v 1.2 2009/06/14 17:59:30 joerg Exp $
-bin/pbm2hp
-bin/pbmrot90
-bin/pbmshift
-bin/vcgdemomaker
-bin/xvcg
-man/manl/pbm2hp.l
-man/manl/pbmrot90.l
-man/manl/pbmshift.l
-man/manl/vcg.l
-man/manl/vcgdemomaker.l
-man/manl/xvcg.l
-share/doc/vcg/visual.ps
-share/examples/vcg/anchors.vcg
-share/examples/vcg/annot1.vcg
-share/examples/vcg/annot2.vcg
-share/examples/vcg/ccmir.vcg
-share/examples/vcg/cfg.vcg
-share/examples/vcg/charset.vcg
-share/examples/vcg/civ.vcg
-share/examples/vcg/colors.vcg
-share/examples/vcg/fishex2a.vcg
-share/examples/vcg/fishex2b.vcg
-share/examples/vcg/fishex3a.vcg
-share/examples/vcg/fishex3b.vcg
-share/examples/vcg/fishex3c.vcg
-share/examples/vcg/flchrt.vcg
-share/examples/vcg/forms.vcg
-share/examples/vcg/forms2.vcg
-share/examples/vcg/hsort.vcg
-share/examples/vcg/hunsort.vcg
-share/examples/vcg/levels.vcg
-share/examples/vcg/morecol.vcg
-share/examples/vcg/pshar1.vcg
-share/examples/vcg/pshar2.vcg
-share/examples/vcg/pshar3.vcg
-share/examples/vcg/pshar4.vcg
-share/examples/vcg/shells.vcg
-share/examples/vcg/softmain.vcg
-share/examples/vcg/softmain2.vcg
-share/examples/vcg/structs.vcg
-share/examples/vcg/tree1.vcg
-share/examples/vcg/tree2.vcg
-share/examples/vcg/tstree.vcg
-share/examples/vcg/xerox.vcg
diff --git a/vcg/TODO b/vcg/TODO
deleted file mode 100644
index b687356..0000000
--- a/vcg/TODO
+++ /dev/null
@@ -1 +0,0 @@
-Clean up and test
diff --git a/vcg/distinfo b/vcg/distinfo
deleted file mode 100644
index 4bfe4dc..0000000
--- a/vcg/distinfo
+++ /dev/null
@@ -1,28 +0,0 @@
-$NetBSD: distinfo,v 1.7 2015/11/03 21:34:34 agc Exp $
-
-SHA1 (vcg.1.30.r3.17.tgz) = 03a821b4a0bd9c5584d34882b167672868fe723d
-RMD160 (vcg.1.30.r3.17.tgz) = 4df7ce2ff7d5de253f9e851194a703d64ed4cdc3
-SHA512 (vcg.1.30.r3.17.tgz) = 7e075a3cf575adb922d0c6843274c1814d3bdc560a1f254a7071fecf20fff3c98921027fd1bc41b452c91c55ffba101c63179bfd8d1bb78cd44e26a54a9a2fcf
-Size (vcg.1.30.r3.17.tgz) = 1429486 bytes
-SHA1 (patch-aa) = b22f4df0a74ae3f970780a514c43a8c23e04163e
-SHA1 (patch-ab) = 26610ed150bef2ec69e3324fc9a2e44e50543978
-SHA1 (patch-ac) = 3cda9b0ab98750c1dab1e7308f4f07f4820936e5
-SHA1 (patch-ad) = cbde5f2486927cfdd48632473df1599ae9eac31e
-SHA1 (patch-ae) = 3ac50f38ba013df290634e9a7a669a3c467eda44
-SHA1 (patch-af) = a49ed3044ba017a151c0cbb8a1766358f1a95153
-SHA1 (patch-ag) = c98783a2e57b36ecab2d0eb6579fe0519c2b9181
-SHA1 (patch-ah) = 3f8165064d741f47e32c9e6cf833af32d8fac28e
-SHA1 (patch-ai) = e5e930e67c2253df6e487f9210e425c55896c83f
-SHA1 (patch-aj) = c88f7286cb4fbbadd770b26a329cd8553d696181
-SHA1 (patch-ak) = 37f05761d9b35f16fc4747a5b9fabf565a0a061f
-SHA1 (patch-al) = 4138c2b6582505210030b8da967fa0056caabdcf
-SHA1 (patch-am) = 7a684e2520448f4cc56b7a3e3b3ec8627370ce78
-SHA1 (patch-an) = 593e624ddbc15869c146dfc6824126b8016527e9
-SHA1 (patch-ao) = ef65b3ce1121b6dbe478c98cec7a26e11e1e8539
-SHA1 (patch-ap) = f439d09a321768ecf9988b77aa1ac28b4c3a0ad7
-SHA1 (patch-aq) = f9a5465d932c1264b2cf3fb1bf734f9363f64650
-SHA1 (patch-demo_animation1_c) = 38feda7060648920be7d372a4c62ed819676ceeb
-SHA1 (patch-demo_animation2_c) = 1073161550bc48ad33cd14d5493198eac0295e11
-SHA1 (patch-demo_animation3_c) = fdce029f72cd8edc64633ac31beddabeba722fbd
-SHA1 (patch-demo_vcgcount_c) = 0ae39c7a6b14b656734264502bd3d617222d9d46
-SHA1 (patch-preconf_X11ccSunOS_conf) = 04fba7328b57ee04f16312c404840e99d5cf3c96
diff --git a/vcg/files/conf b/vcg/files/conf
deleted file mode 100644
index a5f499c..0000000
--- a/vcg/files/conf
+++ /dev/null
@@ -1,38 +0,0 @@
-ADDINCLUDEPATHNAME|-I/usr/X11R6/include/
-ADDLIBPATHNAME|-L/usr/X11R6/lib/
-ADDLIBSNAME|-lXext -lX11 -lm
-ALIGNMENTNAME|8
-ANSINAME|#define ANSI_C
-BIGLTEXNAME|not_available
-BINPATHNAME|/usr/X11R6/bin
-BISONNAME|not_available
-BLOCKSIZENAME|1048576
-CATNAME|/bin/cat
-CCLINKNAME|cc
-CCNAME|cc
-CFLAGSNAME|-c -O2
-CLEARNAME|/usr/bin/clear
-CLINKFLAGSNAME|-o
-FGREPNAME|/usr/bin/fgrep
-FIGTODEVNAME|fig2dev
-FIGTOPSTOTEXNAME|fig2ps2tex
-FLEXNAME|not_needed
-FONTALIASNAME|-*-courier-*-*-*--14-*-*-*-*-*-*-*
-INPUTFOCUSNAME|#define NOINPUTFOCUS
-INSTALLBINNAME|/bin/install -c -s -m 755 dummy $(BINDIR)/dummy
-INSTALLDIRNAME|/bin/mkdir -p
-INSTALLMANNAME|/bin/install -c -m 644 dummy $(MANDIR)/dummy
-LATEXNAME|latex
-LNNAME|/bin/ln
-MAKEDEPENDNAME|makedepend
-MAKENAME|make
-MANEXTNAME|l
-MANPATHNAME|/usr/X11R6/man/manl
-MVNAME|/bin/mv
-RMNAME|/bin/rm
-SEDNAME|/usr/bin/sed
-SLEEPNAME|/bin/sleep
-TOUCHNAME|/usr/bin/touch
-VCGNAME|xvcg
-WCNAME|/usr/bin/wc
-WINDOWSYSTEMNAME|#define X11
diff --git a/vcg/files/demo.csh b/vcg/files/demo.csh
deleted file mode 100644
index f33222d..0000000
--- a/vcg/files/demo.csh
+++ /dev/null
@@ -1,1454 +0,0 @@
-#!/bin/csh
-#
-# SCCS-info %W% %E%
-# $NetBSD: demo.csh,v 1.3 1999/06/13 13:06:08 sakamoto Exp $
-# FreeBSD Id: demo.csh,v 1.1.1.1 1995/02/19 09:25:43 hsu Exp $
-#
-# ====================== Change area ============================
-
-alias OUTP /bin/echo
-
-# ================== End of Change area =========================
-
-OUTP "Configuring ..."
-
-set mvcgn = "../src/xvcg"
-
-if (! -x $mvcgn) then
- set mvcgn = "`echo $BINDIR`xvcg"
-endif
-if (! -x $mvcgn) then
- set mvcgn = "/usr/local/bin/xvcg"
-endif
-if (! -x $mvcgn) then
- set mvcgn = "xvcg"
-endif
-if (! -x $mvcgn) then
- OUTP "Sorry, I cannot find a " $mvcgn
- exit 1
-endif
-
-OUTP "Vcg is" $mvcgn
-
-OUTP ""
-loop:
- OUTP "Please select the window system."
- OUTP "If the VCG tool has problems with colors on "
- OUTP "your display installation, please select a "
- OUTP "monochromatic version even on a color screen."
- OUTP "1 : X11 with colors 2 : Sunview with colors "
- OUTP "3 : X11 monochromatic 4 : Sunview monochromatic"
- set wsys = $<
- switch ($wsys)
- case 1:
- alias MYVCG $mvcgn -geometry 700x700+20-20
- breaksw
- case 2:
- alias MYVCG $mvcgn
- breaksw
- case 3:
- alias MYVCG $mvcgn -geometry 700x700+20-20 -nocolors
- breaksw
- case 4:
- alias MYVCG $mvcgn -nocolors
- breaksw
- default:
- OUTP ""
- OUTP "*** invalid input ***"
- goto loop
- endsw
-
-set mycat = "/bin/cat"
-set myrm = "/bin/rm"
-set mysleep = "/bin/sleep"
-set mysed = "/usr/bin/sed"
-set mywc = "/usr/bin/wc"
-set mygrep = "/usr/bin/fgrep"
-set myclear = "/usr/bin/clear"
-
-alias CAT $mycat
-alias RM $myrm
-alias SLEEP $mysleep
-alias SED $mysed
-alias WCNT $mywc
-alias GREP $mygrep
-alias CLEAR $myclear
-
-
-OUTP
-OUTP "Cleanup ..."
-OUTP "Test" > demoaaa.vcg
-OUTP "Test" > animaaa.vcg
-OUTP "Test" > rbtreeaaa.vcg
-RM demo*.vcg anim*.vcg rbtree*.vcg
-
-OUTP ""
-OUTP "Press Carriage Return key to start the demonstration ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-CLEAR
-OUTP "DEMONSTRATION OF THE VCG TOOL"
-OUTP "============================="
-OUTP ""
-OUTP "Welcome to a tour around the VCG tool ..."
-OUTP ""
-OUTP "NOTE: you can leave the tour at any point by answering"
-OUTP " QUIT (uppercase) on a request of input."
-
-OUTP ""
-OUTP "In the following, we will show several visualizations"
-OUTP "from different applications. Not all features of the "
-OUTP "VCG tool can be demonstrated, but the important once."
-OUTP "Some of the demonstrations are generated by the program"
-OUTP "vcgdemomaker, others are from the directory expl, others"
-OUTP "are animations."
-OUTP ""
-OUTP "To go from one demonstration to the next demonstration,"
-OUTP "you should finish the VCG tool by pressing the key q "
-OUTP "or selecting the menu item Quit."
-OUTP "The menu is shown when pressing the (left) mouse button"
-OUTP "in the VCG window."
-OUTP "Press Carriage Return key to continue ..."
-
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-OUTP "The keyboard commands of the VCG tool are:"
-OUTP ""
-OUTP " q - quit the VCG tool"
-OUTP " r - show or hide the ruler"
-OUTP " f - load another file"
-OUTP " g - reload the same file"
-OUTP " l - display/hide labels of edges"
-OUTP " 1..9 - hide/expose corresponding edge class"
-OUTP " i or I or J - show info fields of nodes"
-OUTP ""
-OUTP "Press Carriage Return key to continue ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-OUTP ""
-OUTP "Scrolling commands:"
-OUTP ""
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " o - go to the origin (0,0) "
-OUTP " p - pick position with the mouse"
-OUTP " P - enter position by co-ordinates"
-OUTP " n - position such that a node is centered"
-OUTP " e - follow an edge (center target/source)"
-OUTP ""
-OUTP "Scaling commands"
-OUTP ""
-OUTP " + or = - stretch "
-OUTP " - or _ - shrink "
-OUTP " 0 - (null) set scale factor to normal"
-OUTP ""
-OUTP ""
-OUTP "Press Carriage Return key to start ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-CLEAR
-OUTP "Example from the sociology: Theory of civilisation"
-OUTP "--------------------------------------------------"
-OUTP "This graph shows the dependencies between the "
-OUTP "invention of wheels, the modern comunism and the "
-OUTP "computer science, etc."
-OUTP "The following graph is scaled by a factor 0.5 and"
-OUTP "uses the layoutalgorithm MINBACKWARD (-D0)."
-OUTP "Other possible layoutalgorithms are MINDEPTH, MAXDEPTH"
-OUTP "and TREE (-D-, -D+ and -Dtree) and many more."
-OUTP ""
-./vcgcount < ../expl/civ.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/civ.vcg
-
-CLEAR
-OUTP "Example: Color test"
-OUTP "-------------------"
-OUTP "This examples shows the default colors that are available."
-OUTP "If your X11 installation has problems with colors, "
-OUTP "use -nocolors. In this case, or if the display is "
-OUTP "monochrom, you will not see the colors."
-OUTP ""
-./vcgcount < ../expl/colors.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/colors.vcg
-
-CLEAR
-OUTP "Example: More Colors"
-OUTP "--------------------"
-OUTP "This examples show how to access to the color map."
-OUTP "Up to 256 colors can be used at the same time."
-OUTP "It is even possible to replace the default colors by"
-OUTP "other red/green/blue values."
-OUTP ""
-./vcgcount < ../expl/morecol.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/morecol.vcg
-
-
-CLEAR
-OUTP "Example: Character set"
-OUTP "----------------------"
-OUTP "The VCG tool uses a fully scalable character set. This character"
-OUTP "set is compatible to the ISO Latin 1 PostScript Encoding Vector"
-OUTP "and contains the special national characters for the most"
-OUTP "European and North American countrys."
-OUTP "If the computer system does not support 8 Bit character codes,"
-OUTP "the special characters can be accessed by ISO code escapes."
-OUTP "For instance, \\fi252 is the german umlaut ue."
-OUTP "Next, we will see the character set."
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/charset.vcg
-
-
-CLEAR
-OUTP "Example: Form test"
-OUTP "------------------"
-OUTP "This examples shows the different forms of nodes and"
-OUTP "edges that are available."
-OUTP "Nodes can be stretched and shrinked individually,"
-OUTP "width, height, textmode and border can be set to "
-OUTP "many values. Edges can be dashed or dotted, at "
-OUTP "different sizes with different arrow sizes."
-OUTP ""
-./vcgcount < ../expl/forms.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/forms.vcg
-
-CLEAR
-OUTP "Example: More forms"
-OUTP "-------------------"
-OUTP "This examples shows further forms of nodes and"
-OUTP "edges that are available: boxes, ellipses, rhombs"
-OUTP "and triangles."
-OUTP ""
-./vcgcount < ../expl/forms2.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/forms2.vcg
-
-
-CLEAR
-OUTP "Example: Ports and Arrow Modes"
-OUTP "------------------------------"
-OUTP "Edge arrows appear at the port of nodes. Port sharing"
-OUTP "means that multiple edges may be adjacent to one port."
-OUTP "This occurs, if the arrows of all these edges have the"
-OUTP "same visual appearance (size, color, ...)."
-OUTP "If we use port sharing, it is recommended to use only"
-OUTP "a fixed set of rotated arrows. Otherwise, the port looks"
-OUTP "like a thick spot since all arrows are differently rotated"
-OUTP "and overlap. This is the arrow mode 'fixed'."
-OUTP "If we don't use port sharing, arrows can be rotated individually."
-OUTP "This is the arrow mode 'free'."
-OUTP ""
-OUTP "Next, we see four times the same graph. At the left examples,"
-OUTP "we use port sharing, but at the right examples, there is no"
-OUTP "port sharing. At the upper examples, we use arrow mode fixed,"
-OUTP "and at the lower examples, we use arrow mode free."
-OUTP ""
-./vcgcount < ../expl/pshar1.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After visualization of this, first, press q into"
-OUTP "the VCG windows at the left sides."
-OUTP "Then, press q into the right VCG windows to go to "
-OUTP "the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG -silent ../expl/pshar1.vcg &
-SLEEP 2
-MYVCG -silent ../expl/pshar3.vcg &
-SLEEP 2
-MYVCG -silent ../expl/pshar2.vcg &
-SLEEP 2
-MYVCG ../expl/pshar4.vcg
-SLEEP 1
-
-
-
-CLEAR
-OUTP "Example: A diagram"
-OUTP "------------------"
-OUTP "This examples shows the influences of different computer"
-OUTP "systems in the context of the development of the computer"
-OUTP "Xerox Star (see Johnson, Roberts, e.a.: The Xerox Star,"
-OUTP "a Retrospective, IEEE Computer; 11-29, Sept. 1989)."
-OUTP "We did some changes in the diagram in order to show the "
-OUTP "possibilities of visualization, but not in order to "
-OUTP "clarify information in the diagram."
-OUTP ""
-./vcgcount < ../expl/xerox.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/xerox.vcg
-
-CLEAR
-OUTP "Example: A flow diagram"
-OUTP "-----------------------"
-OUTP "This examples shows a funny flow diagram about the actions"
-OUTP "of a software maintainer if something does not work."
-OUTP "The text is in german. If I tried to translate it, the gags"
-OUTP "would probably disappear."
-OUTP "One speciality here: the centers of the nodes are aligned onto"
-OUTP "a raster by using the attributes xraster and yraster."
-OUTP "Thus, we have many rectangular edges."
-OUTP ""
-./vcgcount < ../expl/softmain.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/softmain.vcg
-
-
-CLEAR
-OUTP "Example: Orthogonal layout"
-OUTP "--------------------------"
-OUTP "Flowcharts look much better if all edges consist of"
-OUTP "orthogonal line segments. This is the orthogonal layout"
-OUTP "or manhatten layout."
-OUTP "For the manhatten layout, we use a special method to"
-OUTP "place the nodes: the priority method with the straight"
-OUTP "line detection. It is recommended to use these methods"
-OUTP "when manhatten layout is switched on."
-OUTP ""
-OUTP "Next, we see the previous flow diagram at the left side"
-OUTP "and the same diagram with manhatten layout at the right side."
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After visualization of this, first, press q into"
-OUTP "the VCG window at the left side."
-OUTP "Then, press q into the right VCG window to go to "
-OUTP "the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG -silent ../expl/softmain.vcg &
-SLEEP 2
-MYVCG ../expl/softmain2.vcg
-SLEEP 1
-
-
-CLEAR
-OUTP "Example: A control flow graph of a program"
-OUTP "------------------------------------------"
-OUTP "This example shows the control flow graph of a program."
-OUTP "The decision branches are formed by rhombs and bent nearedges."
-OUTP "Nearedges are horizontal edges that constain the two adjacent"
-OUTP "nodes to be placed directly neighbored at the same level."
-OUTP "Bent nearedges are edges that are bent at the label, and"
-OUTP "the source node and the edge label form a near edge. This gives"
-OUTP "the typical appearance of decision branches."
-OUTP ""
-./vcgcount < ../expl/cfg.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/cfg.vcg
-
-
-CLEAR
-OUTP "Example: Another control flow graph"
-OUTP "-----------------------------------"
-OUTP "The next example shows another control flow graph."
-OUTP "Here, the bent nearedges are simulated by some nearedges and"
-OUTP "auxiliary nodes. Again, we use manhatten layout with the"
-OUTP "priority method and the straight line detection."
-OUTP ""
-./vcgcount < ../expl/flchrt.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/flchrt.vcg
-
-
-CLEAR
-OUTP "Example: Anchorpoint test"
-OUTP "-------------------------"
-OUTP "This example shows how to use anchorpoints."
-OUTP "It is possible to anchor an edge at each labelline"
-OUTP "of a node. Nodes representing structs look nice"
-OUTP "in this mode. Note but this restricts of course"
-OUTP "the usage of nearedges."
-OUTP "If you select one of the submenus of the menu item"
-OUTP "Node Information and then pick into the large node"
-OUTP "you can see how to use background text."
-OUTP ""
-./vcgcount < ../expl/anchors.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/anchors.vcg
-
-
-CLEAR
-OUTP "Example: More anchorpoints"
-OUTP "--------------------------"
-OUTP "This example shows a list of C structs. It demonstrates"
-OUTP "the usage of anchorpoints for visualized debugging"
-OUTP "of data structures."
-OUTP ""
-./vcgcount < ../expl/structs.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/structs.vcg
-
-CLEAR
-OUTP "Example: Level test"
-OUTP "-------------------"
-OUTP "This examples shows how to use level specifications."
-OUTP "It is possible to give the nodes arbitrary levels"
-OUTP "for instance to place a node artificially on the top"
-OUTP "of the graph. Normally, the following would be layouted"
-OUTP "as a tree with the root at level 0. But we have specified"
-OUTP "which nodes are at level 0, 1 and 2, such that the root"
-OUTP "is in the center."
-OUTP ""
-./vcgcount < ../expl/levels.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/levels.vcg
-
-
-CLEAR
-OUTP "Example: Horizantal layer sorting"
-OUTP "---------------------------------"
-
-OUTP "The VCG tool reorders the nodes in the levels to avoid"
-OUTP "crossings. But sometimes, the writer of a graph specification"
-OUTP "knows a better order of the nodes into the levels."
-OUTP "He can specify this by the attribute horizontal_order at"
-OUTP "the nodes. If all nodes of a level have this attribute,"
-OUTP "the reordering of this level is suppressed."
-OUTP ""
-OUTP "Warning: this feature works only for connected graphs."
-OUTP "Nonconnected parts are layouted separately, such that"
-OUTP "the order of the nodes of a connected component is predictable",
-OUTP "at a level, but not the order of all nodes at a level."
-OUTP "Is is recommended to use this feature only together with"
-OUTP "level specifications, or at trees, where it is clear at"
-OUTP "which level a node apprears."
-OUTP ""
-OUTP "Next, we see a graph where we want to have the nodes"
-OUTP "sorted at the levels in alphabethic order."
-OUTP "Left, we see the original graph by the standard layout"
-OUTP "algorithm. Here, the ordering at the levels is arbitrary."
-OUTP "At the right side, we use the attribute horizontal_order"
-OUTP "on the same graph to yield an alphabethic ordering at the"
-OUTP "Levels."
-
-OUTP ""
-./vcgcount < ../expl/hsort.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After visualization of this, first, press q into"
-OUTP "the VCG window at the left side."
-OUTP "Then, press q into the right VCG window to go to "
-OUTP "the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG -silent ../expl/hunsort.vcg &
-SLEEP 2
-MYVCG ../expl/hsort.vcg
-SLEEP 1
-
-
-CLEAR
-OUTP "Example: Unary tree of depth 100"
-OUTP "--------------------------------"
-
-vcgdemomaker demo001.vcg -unarytree 100
-
-OUTP "This graph is very simple. All edges have class 2."
-OUTP "You can try to hide the edges, expose them or to"
-OUTP "fold regions."
-OUTP ""
-./vcgcount < demo001.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG demo001.vcg
-
-CLEAR
-OUTP "Example: Binary tree of depth 5"
-OUTP "-------------------------------"
-
-vcgdemomaker demo002.vcg -binarytree 5
-CAT demo002.vcg | SED -e "s/xmax/shrink: 2 &/" > demo003.vcg
-
-OUTP "This graph is very simple. All edges have class 2."
-OUTP "Ary-trees look very nice if we use a layout_downfactor."
-OUTP "Here, we used layout_downfactor: 8."
-OUTP ""
-./vcgcount < demo003.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG demo003.vcg
-
-CLEAR
-OUTP "Example: Binary tree of depth 5"
-OUTP "-------------------------------"
-
-CAT demo003.vcg | SED -e "s/layout_downfactor: 8/layout_downfactor: 1/" > demo004.vcg
-
-OUTP "To compare with, we show the same binary tree with"
-OUTP "layout_downfactor: 1."
-OUTP ""
-./vcgcount < demo004.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG demo004.vcg
-
-
-CLEAR
-OUTP "Example: Layout of trees"
-OUTP "-------------------------"
-
-OUTP "Beside the normal layout algorithm, there is a specialized"
-OUTP "algorithm TREE, that lays out trees even without specifying"
-OUTP "a layout_downfactor."
-OUTP "This specialized algorithm can be used for all graphs that"
-OUTP "can be layouted like downward trees, i.e. their edges form"
-OUTP "unshared branches."
-OUTP "This specialized algorithm is often faster than then normal."
-OUTP "algorithm with layout_downfactor."
-
-OUTP "Left, we see a syntax tree by the standard layout algorithm."
-OUTP "At the right side, we see the same tree with the specialized"
-OUTP "algorithm for trees."
-
-OUTP ""
-./vcgcount < ../expl/tree1.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After visualization of this, first, press q into"
-OUTP "the VCG window at the left side."
-OUTP "Then, press q into the right VCG window to go to "
-OUTP "the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG -silent ../expl/tree1.vcg &
-SLEEP 2
-MYVCG ../expl/tree2.vcg
-SLEEP 1
-
-
-CLEAR
-OUTP "Example: More trees"
-OUTP "-------------------"
-
-OUTP "Trees look very nice, if a special version of the manhatten"
-OUTP "layout method is used: the single line manhatten layout."
-OUTP "Here, all horizontal edge segments share the same"
-OUTP "horizontal line. If the graph is not a tree, then this"
-OUTP "will confuse the user, since it might be not anymore clear,"
-OUTP "which vertical lines are connected by the horizontal"
-OUTP "line. But for trees, it looks nice."
-
-OUTP "We see the same syntax tree as before, but now, we use the"
-OUTP "single line manhatten tree layout for the left graph."
-
-OUTP ""
-./vcgcount < ../expl/tree2.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After visualization of this, first, press q into"
-OUTP "the VCG window at the left side."
-OUTP "Then, press q into the right VCG window to go to "
-OUTP "the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG -silent -dtree -smanhatten ../expl/tree1.vcg &
-SLEEP 2
-MYVCG ../expl/tree2.vcg
-SLEEP 1
-
-
-
-
-CLEAR
-OUTP "Example: Edge priorities"
-OUTP "------------------------"
-
-OUTP "Sometimes, we have a graph consisting of two intermixed"
-OUTP "graphs. Or we have one basic graph and additionally, we have"
-OUTP "edges as annotations. In these cases, we want to recognize "
-OUTP "the structure of the basic graph, but the structure is"
-OUTP "interwoven with the additional edges. But the layout is based"
-OUTP "on all edges, which may result in visualizations where "
-OUTP "the structure of the basic graph is not recognizable anymore."
-OUTP ""
-OUTP "In this case, edge priority comes in. We give the edges of"
-OUTP "the basic graph a higher priority. Then, the additional "
-OUTP "annotation edges are neglected during the layout and are"
-OUTP "drawn rather ugly, but the basic graph is visualized nicely."
-OUTP ""
-OUTP "Next, we will see a tree (thick edges) interwoven with some"
-OUTP "additional edges. Left, we show this graph by the standard"
-OUTP "layout algorithm, where the tree is not recognizable."
-OUTP "At the right side, we use priorities, and then we will recognize"
-OUTP "the tree structure."
-
-OUTP ""
-./vcgcount < ../expl/annot1.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After visualization of this, first, press q into"
-OUTP "the VCG window at the left side."
-OUTP "Then, press q into the right VCG window to go to "
-OUTP "the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG -silent ../expl/annot1.vcg &
-SLEEP 2
-MYVCG -silent ../expl/annot2.vcg
-SLEEP 1
-
-
-CLEAR
-OUTP "Example: Fisheyes"
-OUTP "-----------------"
-
-OUTP "Large graphs have normally the disadvantage that we either"
-OUTP "see the whole graph but no details, because the graph is"
-OUTP "shrinked very much, or we see some details at the point of"
-OUTP "interest but lose the overview of the entire graph structure,"
-OUTP "because the window is too small. A good solution of this"
-OUTP "conflict is the fisheye view that distorts the graph such"
-OUTP "that the focus point is magnified while the remaining parts"
-OUTP "of the graph are demagnified smoothly such that the whole"
-OUTP "graph is visible."
-OUTP "A fisheye view is a coordinate transformation and has"
-OUTP "similiarities with the corresponding photo camera lenses."
-OUTP ""
-OUTP "Next, we will see a large graph. Left, we show the graph"
-OUTP "by the standard view. Right, we see the same graph by the"
-OUTP "cartesian fisheye view. The focus point can be selected"
-OUTP "interactively by the operation Pick Position."
-
-OUTP ""
-./vcgcount < ../expl/fishex3c.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After visualization of this, first, press q into"
-OUTP "the VCG window at the left side."
-OUTP "Then, press q into the right VCG window to go to "
-OUTP "the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG -silent -ypos 170 ../expl/fishex3c.vcg &
-SLEEP 2
-MYVCG -silent -xpos 518 -ypos 1790 -view cfish ../expl/fishex3b.vcg
-SLEEP 1
-
-
-CLEAR
-OUTP "Example: Cartesian fisheyes and polar fisheyes"
-OUTP "----------------------------------------------"
-
-OUTP "Cartesian fisheyes transform the cartesian coordinate system"
-OUTP "while polar fisheyes transform the polar coordinate system."
-OUTP "A polar fisheye can be seen as a mapping of the space onto a"
-OUTP "spheric ball. The polar fisheye does not preserve horizontal"
-OUTP "and vertical lines, while the cartesian fisheye does."
-OUTP "Note that fisheyes may introduce additional bendings of lines"
-OUTP "and crossings that do not appear in the plane view."
-OUTP "However, these effects are seldom and occur due to efficiency"
-OUTP "reasons."
-OUTP ""
-OUTP "Next, we will see the same graph as before. Left, we show the"
-OUTP "graph by the polar fisheye view. Right, we see the graph again"
-OUTP "by the carthesian fisheye view."
-
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After visualization of this, first, press q into"
-OUTP "the VCG window at the left side."
-OUTP "Then, press q into the right VCG window to go to "
-OUTP "the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG -silent -xpos 518 -ypos 1790 -view pfish ../expl/fishex3a.vcg &
-SLEEP 2
-MYVCG -silent -xpos 518 -ypos 1790 -view cfish ../expl/fishex3b.vcg
-SLEEP 1
-
-
-CLEAR
-OUTP "Example: Fisheyes with fixed radius"
-OUTP "-----------------------------------"
-
-OUTP "If not the whole graph but only a fixed area around the focus"
-OUTP "point is of interest, we use the fisheyes with fixed radius."
-OUTP "Then, not the whole graph is visible but only the region around"
-OUTP "the focus point."
-OUTP "While for normal (self adaptable) fisheyes, the location of the"
-OUTP "focus point moves in the window relatively to its movement in"
-OUTP "the graph, the focus point of the fisheyes with fixed radius is"
-OUTP "always centered in the window."
-OUTP ""
-OUTP "Next, we will see a graph with fisheyes of fixed radius. Left,"
-OUTP "we show the graph by the cartesian fisheye view. Right, we see"
-OUTP "the graph again by the polar fisheye view."
-
-OUTP ""
-./vcgcount < ../expl/fishex2a.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After visualization of this, first, press q into"
-OUTP "the VCG window at the left side."
-OUTP "Then, press q into the right VCG window to go to "
-OUTP "the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG -silent -xpos 2300 -ypos 253 -view fcfish ../expl/fishex2a.vcg &
-SLEEP 2
-MYVCG -silent -xpos 2300 -ypos 253 -view fpfish ../expl/fishex2b.vcg
-SLEEP 1
-
-
-CLEAR
-OUTP "Example: Another diagram"
-OUTP "-------------------------"
-
-OUTP "This diagram (Gansner, Koutsofios, e.a.: A Technique"
-OUTP "for Drawing Graphs; IEEE Trans. Soft. Eng. 19, 3, March 93)"
-OUTP "shows the dependencies of different shells."
-OUTP "Here we see a combination of features of the VCG tool."
-OUTP "First, the graph is made connected by 3 invisible edges."
-OUTP "The priority of these edges is set to zero such that"
-OUTP "they do not influence the layout too much. As contrast,"
-OUTP "the layout_downfactor and layout_upfactor is set to 100."
-OUTP "The attribute level is used to set the nodes at the"
-OUTP "appropriate time axis. The attribute horizontal_order"
-OUTP "is used to get the time axis at the left side of the"
-OUTP "graph. Further, we have used splines for the edges."
-
-OUTP ""
-./vcgcount < ../expl/shells.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/shells.vcg
-
-
-CLEAR
-OUTP "Example: Ternary tree of depth 7"
-OUTP "---------------------------------"
-OUTP "Wait half a minute ..."
-
-vcgdemomaker demo005.vcg -ternarytree 7
-CAT demo005.vcg | SED -e "s/xmax/shrink: 2 &/" > demo006.vcg
-
-OUTP "Now a first torture test. This graph is a ternary tree"
-OUTP "with about 3000 nodes and 3000 edges."
-OUTP "We use the normal algorithm with downfactor: 8."
-OUTP "We need about 20 seconds (on a Sparc ELC) to layout it."
-OUTP "WARNING: the visualization may fail on small computers"
-OUTP " because of memory exhausted."
-OUTP ""
-./vcgcount < demo006.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG demo006.vcg
-
-
-CLEAR
-OUTP "Example: Two level cross graph"
-OUTP "------------------------------"
-
-vcgdemomaker demo007.vcg -twolevelcross 1000
-
-OUTP "This is a torture test for bary centering."
-OUTP "This graph is specified in an ugly format with a lot"
-OUTP "of unnecessary crossings. The tool removes these "
-OUTP "crossings."
-OUTP ""
-./vcgcount < demo007.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG demo007.vcg
-
-CLEAR
-OUTP "Example: Nearedge test"
-OUTP "----------------------"
-
-vcgdemomaker demo008.vcg -leveltree 4
-CAT demo008.vcg | SED -e "s/xmax/shrink: 4 &/" > demo009.vcg
-
-OUTP "This is a torture test for near edge layout."
-OUTP "This tree is has a lot of near edges, i.e. "
-OUTP "edges between nodes at the same level."
-OUTP "The nodes of a near edge should be neighboured."
-OUTP ""
-./vcgcount < demo009.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG demo009.vcg
-
-CLEAR
-OUTP "Example: Complete graphs"
-OUTP "------------------------"
-
-vcgdemomaker demo010.vcg -allconnect 5
-
-OUTP "The complete graph has edges between all nodes."
-OUTP "If we have n nodes, then we have about n*n/2 edges."
-OUTP "Here we test the speed of the VCG tool, because "
-OUTP "such graphs are very difficult to layout."
-OUTP "An complete graph of 5 nodes is layouted very fast."
-OUTP ""
-./vcgcount < demo010.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG demo010.vcg
-
-CLEAR
-OUTP "Example: Complete graphs"
-OUTP "------------------------"
-
-vcgdemomaker demo011.vcg -allconnect 10
-CAT demo011.vcg | SED -e "s/xmax/shrink: 10 stretch: 7 &/" > demo012.vcg
-
-OUTP "An complete graph of 10 nodes needs a few seconds."
-OUTP ""
-./vcgcount < demo012.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG demo012.vcg
-
-CLEAR
-OUTP "Example: Complete graphs"
-OUTP "------------------------"
-
-vcgdemomaker demo013.vcg -allconnect 20
-CAT demo013.vcg | SED -e "s/xmax/shrink: 100 stretch: 32 &/" > demo014.vcg
-
-OUTP "An complete graph of 20 nodes needs about 25 seconds"
-OUTP "on a Sparc ELC."
-OUTP ""
-./vcgcount < demo014.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG demo014.vcg
-
-CLEAR
-OUTP "Example: Complete graphs"
-OUTP "------------------------"
-
-vcgdemomaker demo015.vcg -allconnect 30
-CAT demo015.vcg | SED -e "s/xmax/shrink: 10 stretch: 2 &/" > demo016.vcg
-
-OUTP "An complete graph of 30 nodes needs about 110 seconds"
-OUTP "on a Sparc ELC."
-OUTP ""
-./vcgcount < demo016.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG demo016.vcg
-
-CLEAR
-OUTP "Example: Complete graphs"
-OUTP "------------------------"
-
-OUTP "If we have such complex graphs, it is often not necessary"
-OUTP "to have a nice layout, because the graphs are to large "
-OUTP "to see all details at the same time."
-OUTP "In this case, we set the fast flag (option -f) that reduces"
-OUTP "the number of iterations of various layout steps."
-OUTP "Next, we see the same complete graph of 30 nodes as before, however"
-OUTP "now the fast flag is set."
-OUTP "Then, we need only 15 seconds (compared to 100 seconds before),"
-OUTP "but the layout is very ugly."
-
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG -f demo016.vcg
-
-
-CLEAR
-OUTP "Example: Intermediate representation of a compiler (HIR)"
-OUTP "--------------------------------------------------------"
-
-OUTP "The next example comes from the REAL WORLD."
-OUTP "It shows the High Intermediate Representation (HIR)"
-OUTP "of a CLaX program. It is a syntax tree annotated by"
-OUTP "types."
-OUTP "You see the procedure declarations. The main module is"
-OUTP "actually folded (see the green triangle)."
-OUTP "If you select the menu point Hide edges, you will recognize"
-OUTP "that the edge classes are named in this example."
-OUTP "We use the layout algorithm TREE."
-OUTP ""
-./vcgcount < ../expl/tstree.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "We need a few seconds to visualize this. Please wait."
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/tstree.vcg
-
-CLEAR
-OUTP "Example: Intermediate representation of a compiler (CCMIR)"
-OUTP "----------------------------------------------------------"
-
-OUTP "The next example again comes from the REAL WORLD."
-OUTP "It shows the Common Compare Medium Intermediate"
-OUTP "Representation (CCMIR) of a very simple C program."
-OUTP "This graph was generated by the ACE C frontend and a trivial"
-OUTP "additional visualization engine. The edge classes 1-5"
-OUTP "are hidden, otherwise the layout would be to ugly."
-OUTP "They can be exposed by menu selections."
-OUTP ""
-./vcgcount < ../expl/ccmir.vcg
-OUTP ""
-OUTP "Remind: most important keybord commands of vcg"
-OUTP " q - quit the VCG tool"
-OUTP " a "
-OUTP " d c (arrow keys) - scroll to the left/right/up/down"
-OUTP " b "
-OUTP " + - stretch "
-OUTP " - - shrink "
-OUTP ""
-OUTP "After the visualization of this, press q into "
-OUTP "the VCG window to go to the next demonstration."
-
-OUTP "Press Carriage Return key to start visualization ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-MYVCG ../expl/ccmir.vcg
-
-
-CLEAR
-OUTP "Example: Animation demo 1 (communication by touching)"
-OUTP "-----------------------------------------------------"
-OUTP "We show a small animation that demonstrate the "
-OUTP "communication between the VCG tool and a controller "
-OUTP "program called animation3."
-OUTP "The controller program sends signals to the VCG tool."
-OUTP "The VCG tool indicates the completion of vizualization"
-OUTP "by touching its input file."
-OUTP "This demonstration shows a sequence of insertions into"
-OUTP "a red black tree. We see rotations that rebalance the tree."
-OUTP "IMPORTANT: Do not quit the VCG tool. Do not give any "
-OUTP " input (keypress, menu selection) to the VCG tool."
-OUTP " Wait ! The animation is finished automatically."
-
-OUTP ""
-OUTP "Press Carriage Return key to start the animation ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-animation3
-
-OUTP "Ready ! Press Carriage Return key to continue ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-CLEAR
-OUTP "Example: Animation demo 2 (communication by signals)"
-OUTP "----------------------------------------------------"
-OUTP "We show another small animation that demonstrate the "
-OUTP "communication between the VCG tool and a controller "
-OUTP "program called animation1."
-OUTP "The controller program sends signals to the VCG tool."
-OUTP "The VCG tool indicates the completion of vizualization"
-OUTP "by sending a signal back to the controlling program."
-OUTP "IMPORTANT: Do not quit the VCG tool. Do not give any "
-OUTP " input (keypress, menu selection) to the VCG tool."
-OUTP " Wait ! The animation is finished automatically."
-
-OUTP ""
-OUTP "Press Carriage Return key to start the animation ..."
-set f = $<
-if ("$f" == "QUIT") goto finishup
-
-animation2
-
-OUTP "Ready ! Press Carriage Return key to finish the demonstration."
-
-
-finishup:
-CLEAR
-OUTP "This was the demonstration of the vcg tool"
-
-OUTP ""
-loopa:
- OUTP "Should the directory be cleaned ?"
- OUTP "1 : yes 0 : no "
- OUTP "y : yes n : no "
- set wsys = $<
- switch ($wsys)
- case y:
- case 1:
- OUTP "Cleanup ..."
- OUTP "Test" > demoaaa.vcg
- OUTP "Test" > animaaa.vcg
- OUTP "Test" > rbtreeaaa.vcg
- RM demo*.vcg anim*.vcg rbtree*.vcg
- breaksw
- case n:
- case 0:
- breaksw
- default:
- OUTP ""
- OUTP "*** invalid input ***"
- goto loopa
- endsw
-OUTP "Goodbye ..."
-
diff --git a/vcg/files/globals.h b/vcg/files/globals.h
deleted file mode 100644
index 40ffa0f..0000000
--- a/vcg/files/globals.h
+++ /dev/null
@@ -1,433 +0,0 @@
-/* SCCS-info %W% %E% */
-
-/*--------------------------------------------------------------------*/
-/* */
-/* VCG : Visualization of Compiler Graphs */
-/* -------------------------------------- */
-/* */
-/* file: globals.h */
-/* version: 1.00.00 */
-/* creation: 1.4.1993 */
-/* author: I. Lemke (...-Version 0.99.99) */
-/* G. Sander (Version 1.00.00-...) */
-/* Universitaet des Saarlandes, 66041 Saarbruecken */
-/* ESPRIT Project #5399 Compare */
-/* description: Global definitions and setup */
-/* status: in work */
-/* */
-/*--------------------------------------------------------------------*/
-
-/* $NetBSD: globals.h,v 1.4 2013/04/14 00:15:27 dholland Exp $ */
-/* FreeBSD Id: globals.h,v 1.1.1.1 1995/02/19 09:25:43 hsu Exp $ */
-
-/*
- * Copyright (C) 1993--1995 by Georg Sander, Iris Lemke, and
- * the Compare Consortium
- *
- * This program and documentation is free software; you can redistribute
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * The software is available per anonymous ftp at ftp.cs.uni-sb.de.
- * Contact sander%cs.uni-sb.de@localhost for additional information.
- */
-
-
-/*
- * $Log: globals.h,v $
- * Revision 1.4 2013/04/14 00:15:27 dholland
- * Use c89; fix void main; preliminary LP64 fixes (a lot more likely required)
- *
- * Revision 1.3 1999/06/13 13:06:08 sakamoto
- * Fix FreeBSD RCS Id,Log.
- *
- * Revision 1.2 1999/06/13 12:54:19 sakamoto
- * Adapt this package to NetBSD.
- *
- * Revision 1.1.1.1 1995/02/19 09:25:43 hsu
- * vcg - a visualization tool for compiler graphs
- *
- * Submitted by: Philippe Charnier <charnier%lirmm.fr@localhost>
- *
-# Revision 3.7 1994/11/23 14:50:47 sander
-# #include <limits.h> added to get MAX_INT and MIN_INT.
-#
-# Revision 3.6 1994/08/08 16:01:47 sander
-# Attributes xraster, xlraster, yraster added.
-#
-# Revision 3.5 1994/08/02 15:36:12 sander
-# CHECKNODE option added to allow tracing of properties
-# of one single node. For debugging only.
-#
-# Revision 3.4 1994/06/07 14:09:59 sander
-# Splines implemented.
-# HP-UX, Linux, AIX, Sun-Os, IRIX compatibility tested.
-# The tool is now ready to be distributed.
-#
-# Revision 3.3 1994/05/16 08:56:03 sander
-# shape attribute (boxes, rhombs, ellipses, triangles) added.
-#
-# Revision 3.2 1994/03/02 11:48:54 sander
-# Layoutalgoritms mindepthslow, maxdepthslow, minindegree, ... mandegree
-# added.
-# Anchors and nearedges are not anymore allowed to be intermixed.
-# Escapes in strings are now allowed.
-#
-# Revision 3.1 1994/03/01 10:59:55 sander
-# Copyright and Gnu Licence message added.
-# Problem with "nearedges: no" and "selfloops" solved.
-#
-# Revision 1.2 1994/01/21 19:43:42 sander
-# New started with release 1.2 from the scratch.
-# Old and useless comments removed.
-#
- *
- */
-
-/* This file contains the setup of the tool for the C compiler.
- * It is included into every other C file.
- * Please adapt corresponding to your configuration.
- */
-
-#ifndef GLOBALS_H
-#define GLOBALS_H
-
-/*------------- Please change according to your configuration --------*/
-
-/* Ansi C compiler or K&R C compiler ?
- * Mainly, this causes to use prototypes or not. Note that the Suntool
- * include files on some systems are Non-Ansi and may cause confusion.
- * See the corresponding comments in the Makefile.
- * Ansi C compiler set __STDC__, but Non-Ansi compilers may set this, too.
- * Thus we use our own flag ANSI_C.
- */
-
-/* #ifdef __STDC__==1
- * #define ANSI_C
- * #endif
- */
-
-/* #define ANSI_C */
-/* #undef ANSI_C */
-#define ANSI_C
-
-/* The Gnu CC sometimes does not have a standard library.
- * In this case, the include files might be wrong.
- * To get fewer messages on -Wall, define NO_STDINCLUDES
- * with Gnu CC.
- */
-
-#undef NO_STDINCLUDES
-
-
-/* User Signals available or not ?
- * Unix provides signals SIGUSR1 and SIGUSR2 (30, 31), which are used
- * to control animations from external. If signal() or free signals are
- * not available (e.g. on Non-Unix systems), then undefine USR_SIGNAL.
- */
-
-#define USR_SIGNAL
-/* #undef USR_SIGNAL */
-
-
-/* Good quicksort available or not ?
- * If there exist a good randomized quicksort `qsort' in the library,
- * please use it. But if the quicksort in the library is slow, or not
- * randomized, define OWN_QUICKSORT. We often have to sort presorted
- * arrays.
- * Note: If OWN_QUICKSORT is defined, not all calls of `qsort' are
- * exchanged, but only the critical ones.
- */
-
-/* #undef OWN_QUICKSORT */
-#define OWN_QUICKSORT
-
-
-/* Window system Sunview or X11 ?
- * Sunview is fast, but does not support remote window displaying.
- * X11 (R5) is a little bit slower, but supports remote display.
- * Do not define both !!!
- */
-
-/* #define SUNVIEW */
-/* #undef X11 */
-/* #undef SUNVIEW */
-/* #define X11 */
-#define X11
-
-
-/* Required alignment for structs (power of 2). IALIGN is the appropriate
- * bit mask to generate the alignment. Because we use floats in structs,
- * mostly an alignment of 8 is appropriate.
- */
-
-#ifndef ALIGN
-/* #define ALIGN 8 */
-#define ALIGN 8
-#endif
-
-#ifndef IALIGN
-#define IALIGN (ALIGN-1)
-#endif
-
-
-/* Memory block size for memory allocation in bytes. The allocation
- * mechanism allocates blocks of this size, and dynamically increases
- * the number of blocks, if more memory is necessary.
- * Do not set the blocksize too small. For instance the tool does not
- * work with blockssize less than 1 KB. Propose for good performance:
- * 256 KB minimal.
- */
-
-/* Blocks of 1 Megabyte */
-
-/* #define MEMBLOCKSIZE 1048576 */
-#define MEMBLOCKSIZE 1048576
-
-
-/* The default font for X11. Not needed at the Sunview installation.
- * Please insert an appropriate font of about 14 to 17 dot size.
- */
-
-#ifdef X11
-#define VCG_DEFAULT_FONT "-*-courier-*-*-*--14-*-*-*-*-*-*-*"
-#endif
-
-
-/* Whether the input focus grab is actively or not.
- * If NOINPUTFOCUS, the VCG tool does not grab actively the input
- * focus. Depending on the window manager, this may cause that
- * the keypresses are ignored afterwards, unless the mouse pointer
- * is once moved out of the window and back into it.
- * On the other side, some installations cause a fatal error or
- * strange behaviour, if the VCG tool actively grabs the input
- * focus.
- * The conservative definement is #define NOINPUTFOCUS.
- */
-
-#ifdef X11
-#define NOINPUTFOCUS
-#endif
-
-
-/* Debugging On or Off ?
- * We have three kinds of debugging:
- * a) Behaviour tracing: a lot of messages nearly on every
- * function entry are produced if DEBUG is switched on.
- * b) Assertion checking: only if an assertion fails, an
- * appropriate message is produced.
- * c) Node tracing: This is basically the same as the behaviour
- * tracing. At each function entry, the status of a node
- * will be printed. This happens if CHECKNODE is defined.
- * See step0 for the selection of the node to be traced.
- * Behaviour or node tracing is only needed in very serious cases.
- * The macros "debuggingmessage" can be redefined to do some special
- * tests on every entry.
- * Assertion checking can always be done, because it is silent
- * as long as no error occurs. But it consumes runtime.
- * This all can also be defined in the head of a module before
- * #include "globals.h", to debug only this module.
- */
-
-/* for internal debugging */
-#undef DEBUG
-#undef CHECKNODE
-/* for assertion checking at runtime */
-#define CHECK_ASSERTIONS
-
-
-/*
- * If you prefer the system assert.h, then define ASSERT_AVAIL.
- */
-
-/* #define ASSERT_AVAIL */
-#undef ASSERT_AVAIL
-
-/* Check and printout the timing of phases.
- * If CHECK_TIMING is defined, time measurement is done at some
- * critical points. This is only for me, to fine tune the
- * preformance. (GS)
- */
-
-#undef CHECK_TIMING
-
-/*---------------------------- End of Changes ------------------------*/
-
-/* Maximal and minimal positive integer */
-
-#include <limits.h>
-
-#ifndef MAXINT
-#ifdef INT_MAX
-#define MAXINT INT_MAX
-#else
-#define MAXINT 32767
-#endif
-#endif
-
-#ifndef MININT
-#ifdef INT_MIN
-#define MININT INT_MIN
-#else
-#define MININT -32767
-#endif
-#endif
-
-#ifndef MAXLONG
-#ifdef LONG_MAX
-#define MAXLONG LONG_MAX
-#else
-#define MAXLONG 32767
-#endif
-#endif
-
-#ifndef MINLONG
-#ifdef LONG_MIN
-#define MINLONG LONG_MIN
-#else
-#define MINLONG -32767
-#endif
-#endif
-
-
-/* Prototype support */
-
-#ifdef ANSI_C
-#define _PP(x) x
-#else
-#define _PP(x) ()
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-/* Aix CC and OSF does not understand const's */
-
-#ifdef OSF
-#define const
-#endif
-#ifdef AIXCC
-#define const
-#endif
-
-/* Default Window system is X11 */
-
-#ifdef SUNVIEW
-#ifdef X11
-#undef SUNVIEW
-#endif
-#else
-#ifndef X11
-#define X11
-#endif
-#endif
-
-#ifdef X11
-#define FAST_X11_DRAWING
-#endif
-
-/* Debugging messages */
-
-#ifdef DEBUG
-#define debugmessage(a,b) {FPRINTF(stderr,"Debug: %s %s\n",a,b);}
-#else
-#define debugmessage(a,b) /**/
-#endif
-
-#ifdef CHECKNODE
-#define DEBUG
-#undef debugmessage
-#define debugmessage(a,b) { \
- FPRINTF(stderr,"Debug: %s %s &",a,b); \
- if (debug_checknode) \
- FPRINTF(stderr,"Checknode: |%s|\n",NTITLE(debug_checknode)); \
- FPRINTF(stderr,"\n"); \
-}
-#endif
-
-/* Assertions */
-
-#ifndef CHECK_ASSERTIONS
-#define NDEBUG
-#endif
-#ifdef DEBUG
-#undef NDEBUG
-#endif
-
-#ifdef ASSERT_AVAIL
-#include <assert.h>
-#else
-# ifndef NDEBUG
-# define assert(ex) {if (!(ex)) {\
- FPRINTF(stderr,"Assertion failed: file \"%s\", line %d\n",\
- __FILE__, __LINE__); \
- FPRINTF(stderr,"This is a bug! Please contact sander%cs.uni-sb.de@localhost !\n");\
- exit(1);}}
-# else
-# define assert(ex)
-# endif
-# endif
-
-
-/* To make lint happy */
-
-#define PRINTF (void)printf
-#define FPRINTF (void)fprintf
-#define SPRINTF (void)sprintf
-#define FCLOSE (void)fclose
-#define FFLUSH (void)fflush
-#define FREE (void)free
-
-/* To make ANSI C compiler with -Wall more happy */
-
-#ifdef ANSI_C
-#ifdef NO_STDINCLUDES
-int fprintf(FILE *stream, const char *format, ...);
-int printf(const char *format, ...);
-int scanf(const char *format, ...);
-int atoi(char *x);
-double atof(char *x);
-int islower(int s);
-int isupper(int s);
-int tolower(int s);
-int toupper(int s);
-void bcopy(void *b1,void *b2,int length);
-int fputs(const char *s, FILE *stream);
-size_t fwrite(const void *ptr, size_t s, size_t n, FILE *stream);
-int fclose(FILE *stream);
-FILE *fopen(const char *filename, const char *mode);
-void system(char *string);
-int fflush(FILE *stream);
-int getppid(void);
-#ifdef X11
-char *getwd(char pn[]);
-#endif
-int fgetc(FILE *stream);
-#endif
-#endif
-
-#define gstoint(x) ((int)(x))
-#ifdef HPUX
-#define alloca(x) (malloc(x))
-#define getwd(h) (getcwd(h,MAXPATHLEN-1))
-#endif
-
-#ifdef VMS
-#define alloca(x) (malloc(x))
-#endif
-
-/*--------------------------------------------------------------------*/
-
-#endif /* GLOBALS_H */
-
diff --git a/vcg/files/tMakefile b/vcg/files/tMakefile
deleted file mode 100644
index 9c89d0b..0000000
--- a/vcg/files/tMakefile
+++ /dev/null
@@ -1,378 +0,0 @@
-# SCCS-info %W% %E%
-#
-# /*--------------------------------------------------------------------*/
-# /* */
-# /* VCG : Visualization of Compiler Graphs */
-# /* -------------------------------------- */
-# /* */
-# /* file: tMakefile.tpl */
-# /* version: 1.00.00 */
-# /* creation: 1.4.1993 */
-# /* author: I. Lemke (...-Version 0.99.99) */
-# /* G. Sander (Version 1.00.00-...) */
-# /* Universitaet des Saarlandes, W-66041 Saarbruecken */
-# /* ESPRIT Project #5399 Compare */
-# /* description: Top level Makefile */
-# /* status: in work */
-# /* */
-# /*--------------------------------------------------------------------*/
-#
-# $NetBSD: tMakefile,v 1.6 2010/02/03 22:22:53 joerg Exp $
-# FreeBSD Id: tMakefile,v 1.1.1.1 1995/02/19 09:25:45 hsu Exp $
-#
-# FreeBSD Log: tMakefile,v $
-# Revision 1.1.1.1 1995/02/19 09:25:45 hsu
-# vcg - a visualization tool for compiler graphs
-#
-# Submitted by: Philippe Charnier <charnier%lirmm.fr@localhost>
-#
-#
-
-#========================= CHANGE AREA =========================
-
-# Please update the change area according to your system.
-# NOTE: you must also adapt the file src/globals.h and demo/demo.csh
-# accordingly.
-
-SHELL = /bin/sh
-
-# where the binaries go
-# BINDIR = /usr/local/bin/
-# BINDIR = /RW/esprit/users/sander/PUBLIC/CMD/
-BINDIR = ${DESTDIR}${PREFIX}/bin
-
-# where the manual pages go
-# MANDIR = /usr/local/man/manl/
-# MANDIR = /RW/esprit/users/sander/PUBLIC/MAN/
-MANDIR = ${DESTDIR}${PREFIX}/${PKGMANDIR}/manl
-
-# what the manual extension is
-MANEXT = l
-
-# how the VCG tool should be called
-# For the Sunview version I use the name vcg.
-# For the X11 version I prefer the name xvcg.
-# VCGTOOL = vcg
-# VCGTOOL = xvcg
-VCGTOOL = xvcg
-
-# Note: you can test the tool before it is installed.
-# Thus we need the path of the tool for the tests.
-# It may also be the path of the tool after installation.
-# Then use
-VCGCALL = $(BINDIR)/$(VCGTOOL)
-#
-# Used during the demoanimations:
-# where the vcg is during the tests.
-# Please enter the absolute path to the VCG-tool.
-# VCGCALL = /usr/local/bin/vcg
-# VCGCALL = /RW/esprit/users/sander/PUBLIC/CMD/$(VCGTOOL)
-
-#-------------------------- Flags ------------------------------
-
-# Flags for the C compiler
-# Important: Do not use -Dlint with gcc. This causes confusion
-# during linking (!!!), e.g. some undefined messages.
-#CFLAGS = -O -finline-functions
-#CFLAGS = -O -finline-functions -DDRAWLIB_TOO_LARGE
-#CFLAGS = -g -finline-functions -Wall
-#
-# Do not use -O -finline-functions for FreeBSD, or you really have a lot
-# of swap for compiling drawstr.c.
-CFLAGS = -c -O2 -pipe
-
-# Flags for debugging
-DFLAGS =
-
-# Flags for the C linker
-#CLINKFLAGS = -Bstatic -o
-CLINKFLAGS = -o
-
-# Include directories
-# If you use gcc, it may happen that not all ANSI header files
-# are on the right place. Example: we often have problems to
-# find stdarg.h. Look for this file and add the directory here,
-# e.g.:
-# INCLUDES = /usr/local/include/gnuansi/
-#
-# For Sunview, this should be enough, because on Suns, Sunview
-# is normally installed in standard directories:
-# INCLUDES =
-#
-# For X11, it depends where it is installed. Look for Xlib.h,
-# Xproto.h or Xutil.h.
-# For instance, if you find /usr/local/X11/include/X11/Xlib.h
-# then please use
-# INCLUDES = -I/usr/local/X11/include/
-# INCLUDES = -I/RW/esprit/X11R5/include/
-INCLUDES = -I${X11BASE}/include/
-
-# Library directories
-# For Sunview, this should be enough, because on Suns, Sunview
-# is normally installed in standard directories:
-# LIBPATH =
-#
-# For X11, it depends where it is installed. Look for libX.a,
-# or libX11.so.<version_number>, or libXext.a, etc.
-# For instance, if you find /usr/local/X11/lib/libX11.a
-# then please use
-# LIBPATH = -L/usr/local/X11/lib/
-# LIBPATH = -L/RW/esprit/X11R5/lib/
-LIBPATH = -L${X11BASE}/lib/
-
-# Libraries
-# Libraries for SunView
-# LIBRARIES = -lsuntool -lsunwindow -lpixrect -lm
-#
-# Libraries for X11
-# LIBRARIES = -lXext -lX11 -lm
-LIBRARIES = -lXext -lX11 -lm
-
-#-------------------------- Tools ------------------------------
-
-# C compiler
-# CC = gcc -pipe
-CC = cc
-
-# C linker
-# CCLINK = gcc -static
-CCLINK = cc
-
-# If you use gcc and the sun driver, you need the normal sun
-# preprocessor because of incompatibilities of the system libraries
-CPP = $(CC) -E
-
-# If you dont need a special preprocessor, change the .c.o rule or
-# define this:
-#CPP = cat
-
-# Install software. You can use /bin/cp instead of /bin/install.
-# I prefer that binaries are stripped.
-# For directories:
-# INSTALLDIR = /bin/install -d -m 755
-INSTALLDIR = /bin/mkdir -p
-
-# For binary files:
-# Assume that you want to install s file called dummy.
-# INSTALL = /bin/install -s -m 755 dummy $(BINDIR)/dummy
-INSTALL = /usr/bin/install -c -s -m 755 dummy $(BINDIR)/dummy
-
-# For manual pages:
-# Assume that you want to install s file called dummy.
-# INSTALLMAN = /bin/install -m 644 dummy $(MANDIR)/dummy
-INSTALLMAN = /usr/bin/install -c -m 644 dummy $(MANDIR)/dummy
-
-# To make the documentation
-LATEX = latex
-
-# To make the short documentation using big-latex
-BIGLATEX = not_available
-
-# For the pictures, we need some transfig-tools.
-# If the files doc/foldpath.tex, doc/foldpath.ps,
-# doc/foldtree.tex, doc/foldtree.ps, doc/hideedge.tex,
-# doc/hideedge.ps, doc/window.tex, doc/window.ps
-# are available, we do not need this.
-#
-TRANSFIGTEX = fig2ps2tex
-TRANSFIGPS = fig2dev
-
-
-# The tools CHECKOUT, CHECKEDIT and CHECKIN are not needed unless
-# you want to develop, change or maintain the VCG tool sources
-# under control of RCS.
-
-# RCS check out shellscript (normally not needed)
-CHECKOUT = co
-
-# RCS check edit shellscript (normally not needed)
-CHECKEDIT = ce
-
-# RCS check in shellscript (normally not needed)
-CHECKIN = ci
-
-# parser pregenerator. If the files src/grammar.y and src/grammar.l
-# are available, you don't need this.
-PARSEGEN = parsegen
-
-# lex-compatible scanner generator
-LEX = not_needed
-
-# yacc-compatible parser generator. Currently, it does not work
-# with yacc because some bison features are used directly.
-YACC = not_needed
-
-# Make
-# MAKE = make
-MAKE = make
-
-# MakeDepend (should understand the -f option)
-# DEPEND = makedepend
-DEPEND = makedepend
-
-# Streameditor
-# SED = /bin/sed
-SED = /usr/bin/sed
-
-# Move File
-# MV = /bin/mv
-MV = /bin/mv
-
-# Link Files (or Copy them)
-# LN = /bin/ln -s
-LN = /bin/ln
-
-# Remove File
-# RM = /bin/rm
-RM = /bin/rm
-
-# Change directory
-CD = cd
-
-# Touch file
-# TOUCH = touch
-TOUCH = /usr/bin/touch
-
-#==================== END OF CHANGE AREA ======================
-
-#-------------------------- Files ------------------------------
-
-# Directories
-DIRECTORIES = src man demo doc expl
-
-# The tarfiles of subdirectories, to make a distribution
-SUBTARFILES = src/vcg.tar man/manpages.tar demo/demo.tar doc/doc.tar \
- expl/expl.tar
-
-# These files are generated, but included into a distribution.
-# They are in the directory preconf.
-
-GEN_DISTFILES = tMakefile src/globals.h demo/demo.csh
-
-
-# Directories where we have something to make
-MAKEDIRS = src demo man doc
-
-# Directories where we have something to install
-INSTDIRS = src demo man doc
-
-#-------------------------- Rules ------------------------------
-
-MAKEARGUS = \
- SHELL="$(SHELL)" \
- BINDIR="$(BINDIR)" \
- MANDIR="$(MANDIR)" \
- MANEXT="$(MANEXT)" \
- VCGTOOL="$(VCGTOOL)" \
- VCGCALL="$(VCGCALL)" \
- CFLAGS="$(CFLAGS)" \
- CLINKFLAGS="$(CLINKFLAGS)" \
- DFLAGS="$(DFLAGS)" \
- INCLUDES="$(INCLUDES)" \
- LIBPATH="$(LIBPATH)" \
- LIBRARIES="$(LIBRARIES)" \
- CC="$(CC)" \
- CCLINK="$(CCLINK)" \
- CPP="$(CPP)" \
- LATEX="$(LATEX)" \
- BIGLATEX="$(BIGLATEX)" \
- TRANSFIGTEX="$(TRANSFIGTEX)" \
- TRANSFIGPS="$(TRANSFIGPS)" \
- INSTALLDIR="$(INSTALLDIR)" \
- INSTALL="$(INSTALL)" \
- INSTALLMAN="$(INSTALLMAN)" \
- CHECKOUT="$(CHECKOUT)" \
- CHECKEDIT="$(CHECKEDIT)" \
- CHECKIN="$(CHECKIN)" \
- PARSEGEN="$(PARSEGEN)" \
- LEX="$(LEX)" \
- YACC="$(YACC)" \
- MAKE="$(MAKE)" \
- DEPEND="$(DEPEND)" \
- SED="$(SED)" \
- MV="$(MV)" \
- LN="$(LN)" \
- RM="$(RM)" \
- CD="$(CD)" \
- TOUCH="$(TOUCH)"
-
-all: stamp-src stamp-demo stamp-doc stamp-shortdoc
-
-stamp-src: src
- ($(CD) src; $(MAKE) $(MAKEARGUS))
- $(TOUCH) stamp-src
-
-stamp-demo: demo
- ($(CD) demo; $(MAKE) $(MAKEARGUS))
- $(TOUCH) stamp-demo
-
-stamp-doc: doc
- ($(CD) doc; $(MAKE) $(MAKEARGUS))
- $(TOUCH) stamp-doc
-
-stamp-shortdoc: doc
- ($(CD) doc; $(MAKE) $(MAKEARGUS) short)
- $(TOUCH) stamp-shortdoc
-
-demonstration: test
-
-documentation: doc
-
-shortdocu: stamp-shortdoc
-
-install: stamp-src stamp-demo
- for i in $(INSTDIRS) ;\
- do \
- ($(CD) $$i; $(MAKE) $(MAKEARGUS) install); \
- done
-
-test: stamp-src stamp-demo
- ($(CD) demo; csh demo.csh);
-
-clean:
- for i in $(MAKEDIRS) ;\
- do \
- ($(CD) $$i; $(MAKE) RM="$(RM)" clean); \
- done
- $(RM) -f stamp-* core
-
-veryclean:
- for i in $(MAKEDIRS) ;\
- do \
- ($(CD) $$i; $(MAKE) RM="$(RM)" veryclean); \
- done
- $(RM) -f stamp-* core
-
-targetclean:
- for i in $(MAKEDIRS) ;\
- do \
- ($(CD) $$i; $(MAKE) RM="$(RM)" targetclean); \
- done
- $(RM) -f stamp-* core
-
-distclean:
- for i in $(MAKEDIRS) ;\
- do \
- ($(CD) $$i; $(MAKE) RM="$(RM)" distclean); \
- done
- $(RM) -f stamp-* core
-
-depend:
- for i in $(MAKEDIRS) ;\
- do \
- ($(CD) $$i; $(MAKE) $(MAKEARGUS) depend); \
- done
-
-tar: tMakefile Makefile $(DIRECTORIES)
- for i in $(DIRECTORIES) ;\
- do \
- ($(CD) $$i; $(MAKE) $(MAKEARGUS) dist); \
- done
- tar -cf vcgcomplete.tar README README.SYS COPYING \
- demotrue config tMakefile.tpl Makefile preconf $(SUBTARFILES)
-
-
-dist: tar
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
diff --git a/vcg/patches/patch-aa b/vcg/patches/patch-aa
deleted file mode 100644
index ec23c65..0000000
--- a/vcg/patches/patch-aa
+++ /dev/null
@@ -1,13 +0,0 @@
-$NetBSD: patch-aa,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 16:56:11
-+++ demo/Makefile 1995/02/18 16:57:11
-@@ -124,7 +124,7 @@
-
- # Generated Other - Files
- GOFILES = animfile1.vcg animfile2.vcg rbtree.vcg
--
-+
- # Object - Files
- OFILES = animation1.o animation2.o pbmrot90.o pbmshift.o vcgdemomaker.o \
- animation3.o vcgcount.o pbm2hp.o
diff --git a/vcg/patches/patch-ab b/vcg/patches/patch-ab
deleted file mode 100644
index 8cafec3..0000000
--- a/vcg/patches/patch-ab
+++ /dev/null
@@ -1,22 +0,0 @@
-$NetBSD: patch-ab,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 16:57:50
-+++ doc/Makefile 1995/02/18 16:58:35
-@@ -72,7 +72,7 @@
-
-
- # RCS Version control stuff
--
-+
- $(SOURCES):
- $(CHECKOUT) $@
-
-@@ -87,7 +87,7 @@
-
- clean:
- $(RM) -f *.aux *.toc *.log *.lof *.lot *.spell tmp* core
--
-+
- veryclean: clean
- $(RM) -f *.dvi
-
diff --git a/vcg/patches/patch-ac b/vcg/patches/patch-ac
deleted file mode 100644
index 885c28f..0000000
--- a/vcg/patches/patch-ac
+++ /dev/null
@@ -1,47 +0,0 @@
-$NetBSD: patch-ac,v 1.3 2013/04/14 00:15:27 dholland Exp $
-
-- use standard headers
-- use <ctype.h> functions correctly
-
---- src/preconf/y.tab.c.orig 1995-02-08 18:40:18.000000000 +0000
-+++ src/preconf/y.tab.c
-@@ -443,7 +443,7 @@ extern YY_CHAR *yytext;
-
- #ifndef YY_MALLOC_DECL
- #define YY_MALLOC_DECL
--#include <malloc.h>
-+#include <stdlib.h>
- #endif
-
- #undef YYVALGLOBAL
-@@ -5755,8 +5755,8 @@ char *mesge;
- #endif
- {
- strcpy(myprivmessage,mesge);
-- if (islower(*myprivmessage))
-- *myprivmessage = toupper(*myprivmessage);
-+ if (islower((unsigned char)*myprivmessage))
-+ *myprivmessage = toupper((unsigned char)*myprivmessage);
- FPRINTF(stderr,"Syntax error (%s: l:%d p:%d): %s !\n",
- filename,line,pos,myprivmessage);
- nr_errors++;
-@@ -5781,8 +5781,8 @@ char *mesge;
- #endif
- {
- strcpy(myprivmessage,mesge);
-- if (islower(*myprivmessage))
-- *myprivmessage = toupper(*myprivmessage);
-+ if (islower((unsigned char)*myprivmessage))
-+ *myprivmessage = toupper((unsigned char)*myprivmessage);
- FPRINTF(stderr,"Warning (%s: l:%d p:%d): %s !\n",
- filename,line,pos,myprivmessage);
- }
-@@ -5812,7 +5812,7 @@ static char *stdpc_id_string="$Id: stdpc
-
-
- #include <stdio.h>
--#include <malloc.h>
-+#include <stdlib.h>
- #ifdef ANSI_C
- #include <stdarg.h>
- #else
diff --git a/vcg/patches/patch-ad b/vcg/patches/patch-ad
deleted file mode 100644
index cbf51b7..0000000
--- a/vcg/patches/patch-ad
+++ /dev/null
@@ -1,22 +0,0 @@
-$NetBSD: patch-ad,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:09:45
-+++ src/preconf/lex.yy.c 1995/02/18 17:21:39
-@@ -1665,7 +1665,7 @@
-
- #ifndef YY_MALLOC_DECL
- #define YY_MALLOC_DECL
--#include <malloc.h>
-+#include <stdlib.h>
- #endif
-
- #undef YYVALGLOBAL
-@@ -5256,7 +5256,7 @@
-
- #include <stdio.h>
- #include <string.h>
--#include <malloc.h>
-+#include <stdlib.h>
-
- /* Global Variables */
- /*------------------*/
diff --git a/vcg/patches/patch-ae b/vcg/patches/patch-ae
deleted file mode 100644
index 9478a2a..0000000
--- a/vcg/patches/patch-ae
+++ /dev/null
@@ -1,18 +0,0 @@
-$NetBSD: patch-ae,v 1.3 1999/09/14 11:07:58 sakamoto Exp $
-
---- src/Makefile.orig Wed Feb 8 20:35:38 1995
-+++ src/Makefile Tue Sep 14 14:50:31 1999
-@@ -187,5 +187,5 @@
- # Generated Other - Files
- GOFILES = grammar.l grammar.y
--
-+
- # Object - Files
- OFILES = y.tab.o lex.yy.o main.o options.o alloc.o step0.o folding.o \
-@@ -214,5 +214,5 @@
-
- $(VCGTOOL): $(OFILES)
-- $(CCLINK) $(CLINKFLAGS) $(VCGTOOL) $(OFILES) $(LIBPATH) $(LIBRARIES)
-+ $(CCLINK) $(CLINKFLAGS) $(VCGTOOL) $(OFILES) $(LIBPATH) $(LDFLAGS) $(LIBRARIES)
-
- .SUFFIXES: .c .o
diff --git a/vcg/patches/patch-af b/vcg/patches/patch-af
deleted file mode 100644
index df807dd..0000000
--- a/vcg/patches/patch-af
+++ /dev/null
@@ -1,13 +0,0 @@
-$NetBSD: patch-af,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:44:23
-+++ src/main.c 1995/02/18 17:44:52
-@@ -147,7 +147,7 @@
-
- #ifdef X11
-
--#include <X11/Xos.h>
-+/*#include <X11/Xos.h>*/
- #include <X11/Xlib.h>
- #include <X11/Xutil.h>
- #include <X11/cursorfont.h>
diff --git a/vcg/patches/patch-ag b/vcg/patches/patch-ag
deleted file mode 100644
index c616efc..0000000
--- a/vcg/patches/patch-ag
+++ /dev/null
@@ -1,13 +0,0 @@
-$NetBSD: patch-ag,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:48:32
-+++ src/X11dev.c 1995/02/18 17:48:52
-@@ -181,7 +181,7 @@
-
- #ifdef X11
-
--#include <X11/Xos.h>
-+/*#include <X11/Xos.h>*/
- #include <X11/Xlib.h>
- #include <X11/Xutil.h>
- #include <X11/cursorfont.h>
diff --git a/vcg/patches/patch-ah b/vcg/patches/patch-ah
deleted file mode 100644
index a589ddc..0000000
--- a/vcg/patches/patch-ah
+++ /dev/null
@@ -1,13 +0,0 @@
-$NetBSD: patch-ah,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:48:53
-+++ src/X11devcl.c 1995/02/18 17:49:10
-@@ -115,7 +115,7 @@
-
- #ifdef X11
-
--#include <X11/Xos.h>
-+/*#include <X11/Xos.h>*/
- #include <X11/Xlib.h>
- #include <X11/Xutil.h>
- #include <X11/cursorfont.h>
diff --git a/vcg/patches/patch-ai b/vcg/patches/patch-ai
deleted file mode 100644
index 7d1622e..0000000
--- a/vcg/patches/patch-ai
+++ /dev/null
@@ -1,13 +0,0 @@
-$NetBSD: patch-ai,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:49:10
-+++ src/X11devfe.c 1995/02/18 17:49:26
-@@ -85,7 +85,7 @@
-
- #ifdef X11
-
--#include <X11/Xos.h>
-+/*#include <X11/Xos.h>*/
- #include <X11/Xlib.h>
- #include <X11/Xutil.h>
- #include <X11/cursorfont.h>
diff --git a/vcg/patches/patch-aj b/vcg/patches/patch-aj
deleted file mode 100644
index 200fb1c..0000000
--- a/vcg/patches/patch-aj
+++ /dev/null
@@ -1,22 +0,0 @@
-$NetBSD: patch-aj,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:49:27
-+++ src/X11devfs.c 1995/02/18 18:03:42
-@@ -107,7 +107,7 @@
-
- #ifdef X11
-
--#include <X11/Xos.h>
-+/*#include <X11/Xos.h>*/
- #include <X11/Xlib.h>
- #include <X11/Xutil.h>
- #include <X11/cursorfont.h>
-@@ -128,7 +128,7 @@
- #else
- #include <sys/types.h>
- #include <sys/stat.h>
--#include <sys/param.h>
-+/*#include <sys/param.h> */
- #include <dirent.h>
- #include <grp.h>
- #include <pwd.h>
diff --git a/vcg/patches/patch-ak b/vcg/patches/patch-ak
deleted file mode 100644
index 2e2b9db..0000000
--- a/vcg/patches/patch-ak
+++ /dev/null
@@ -1,13 +0,0 @@
-$NetBSD: patch-ak,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:49:42
-+++ src/X11devla.c 1995/02/18 17:49:58
-@@ -122,7 +122,7 @@
-
- #ifdef X11
-
--#include <X11/Xos.h>
-+/*#include <X11/Xos.h>*/
- #include <X11/Xlib.h>
- #include <X11/Xutil.h>
- #include <X11/cursorfont.h>
diff --git a/vcg/patches/patch-al b/vcg/patches/patch-al
deleted file mode 100644
index 6266a92..0000000
--- a/vcg/patches/patch-al
+++ /dev/null
@@ -1,13 +0,0 @@
-$NetBSD: patch-al,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:49:58
-+++ src/X11devpb.c 1995/02/18 17:50:16
-@@ -115,7 +115,7 @@
-
- #ifdef X11
-
--#include <X11/Xos.h>
-+/*#include <X11/Xos.h>*/
- #include <X11/Xlib.h>
- #include <X11/Xutil.h>
- #include <X11/cursorfont.h>
diff --git a/vcg/patches/patch-am b/vcg/patches/patch-am
deleted file mode 100644
index fa87526..0000000
--- a/vcg/patches/patch-am
+++ /dev/null
@@ -1,13 +0,0 @@
-$NetBSD: patch-am,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:50:17
-+++ src/X11devst.c 1995/02/18 17:50:33
-@@ -68,7 +68,7 @@
-
- #ifdef X11
-
--#include <X11/Xos.h>
-+/*#include <X11/Xos.h>*/
- #include <X11/Xlib.h>
- #include <X11/Xutil.h>
- #include <X11/cursorfont.h>
diff --git a/vcg/patches/patch-an b/vcg/patches/patch-an
deleted file mode 100644
index 85cacec..0000000
--- a/vcg/patches/patch-an
+++ /dev/null
@@ -1,13 +0,0 @@
-$NetBSD: patch-an,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:50:34
-+++ src/X11devti.c 1995/02/18 17:50:48
-@@ -111,7 +111,7 @@
-
- #ifdef X11
-
--#include <X11/Xos.h>
-+/*#include <X11/Xos.h>*/
- #include <X11/Xlib.h>
- #include <X11/Xutil.h>
- #include <X11/cursorfont.h>
diff --git a/vcg/patches/patch-ao b/vcg/patches/patch-ao
deleted file mode 100644
index fbcb618..0000000
--- a/vcg/patches/patch-ao
+++ /dev/null
@@ -1,13 +0,0 @@
-$NetBSD: patch-ao,v 1.2 1999/06/13 12:54:19 sakamoto Exp $
-
---- 1.1 1995/02/18 17:50:49
-+++ src/X11devvw.c 1995/02/18 17:51:04
-@@ -87,7 +87,7 @@
-
- #ifdef X11
-
--#include <X11/Xos.h>
-+/*#include <X11/Xos.h>*/
- #include <X11/Xlib.h>
- #include <X11/Xutil.h>
- #include <X11/cursorfont.h>
diff --git a/vcg/patches/patch-ap b/vcg/patches/patch-ap
deleted file mode 100644
index 3e068b6..0000000
--- a/vcg/patches/patch-ap
+++ /dev/null
@@ -1,22 +0,0 @@
-$NetBSD: patch-ap,v 1.3 2006/06/14 10:32:35 rillig Exp $
-
---- 1.1 1995/02/18 16:48:19
-+++ Makefile 1995/02/18 17:12:05
-@@ -31,7 +31,7 @@
-
- #all: stamp-all
-
--all: xvcg_gcc xvcg
-+all: xvcg_cc xvcg
-
- configure: stamp-config
-
-@@ -236,7 +236,7 @@
- @echo " make xvcg_c89_noxmkmf"
- @echo " make vcg_gcc"
- @echo " make vcg_cc"
--
-+
- compare: preconf xcompare xvcg install
- /bin/rm $(PROJECTHOME)/../bin/vcg
- ln -s $(PROJECTHOME)/../bin/xvcg $(PROJECTHOME)/../bin/vcg
diff --git a/vcg/patches/patch-aq b/vcg/patches/patch-aq
deleted file mode 100644
index a77bc4e..0000000
--- a/vcg/patches/patch-aq
+++ /dev/null
@@ -1,15 +0,0 @@
-$NetBSD: patch-aq,v 1.3 2006/09/02 20:47:03 rillig Exp $
-
-Work around the error message "inconsistent operator for all".
-
---- preconf/X11/Imakefile.org Wed Feb 8 11:48:30 1995
-+++ preconf/X11/Imakefile Thu Jun 12 10:35:35 1997
-@@ -2,7 +2,7 @@
- DEPLIBS = $(DEPXLIB)
- LOCAL_LIBRARIES = $(XLIB)
-
--all:
-+all::
- @ echo "#"
- @ echo LIBPATH = -L$(USRLIBDIR)
- @ echo INCLUDES = $(ALLINCLUDES)
diff --git a/vcg/patches/patch-demo_animation1_c b/vcg/patches/patch-demo_animation1_c
deleted file mode 100644
index df6c16b..0000000
--- a/vcg/patches/patch-demo_animation1_c
+++ /dev/null
@@ -1,24 +0,0 @@
-$NetBSD: patch-demo_animation1_c,v 1.1 2013/04/14 00:15:27 dholland Exp $
-
-- use standard headers
-- call execl correctly
-
---- demo/animation1.c~ 1995-02-08 11:27:32.000000000 +0000
-+++ demo/animation1.c
-@@ -80,6 +80,7 @@
- #include <stdlib.h>
- #include <string.h>
- #include <signal.h>
-+#include <unistd.h>
- #include <sys/types.h>
- #include <sys/stat.h>
- #include "../src/globals.h"
-@@ -228,7 +229,7 @@ void call_vcg()
- #ifdef X11
- "-geometry","200x200-30+30",
- #endif
-- filename,0L);
-+ filename, (char *)NULL);
- }
- /* NEVER REACHED */
-
diff --git a/vcg/patches/patch-demo_animation2_c b/vcg/patches/patch-demo_animation2_c
deleted file mode 100644
index f86077f..0000000
--- a/vcg/patches/patch-demo_animation2_c
+++ /dev/null
@@ -1,24 +0,0 @@
-$NetBSD: patch-demo_animation2_c,v 1.1 2013/04/14 00:15:27 dholland Exp $
-
-- use standard headers
-- call execl correctly
-
---- demo/animation2.c~ 1995-02-08 11:27:33.000000000 +0000
-+++ demo/animation2.c
-@@ -83,6 +83,7 @@
- #include <stdlib.h>
- #include <string.h>
- #include <signal.h>
-+#include <unistd.h>
- #include "../src/globals.h"
-
-
-@@ -237,7 +238,7 @@ void call_vcg()
- #ifdef X11
- "-geometry","200x200-30+30",
- #endif
-- filename,0L);
-+ filename, (char *)NULL);
- }
- /* NEVER REACHED */
-
diff --git a/vcg/patches/patch-demo_animation3_c b/vcg/patches/patch-demo_animation3_c
deleted file mode 100644
index 16bb791..0000000
--- a/vcg/patches/patch-demo_animation3_c
+++ /dev/null
@@ -1,92 +0,0 @@
-$NetBSD: patch-demo_animation3_c,v 1.1 2013/04/14 00:15:27 dholland Exp $
-
-- fix void main
-- print pointers correctly (use %jd rather than %p as it appears they
- need to print in decimal)
-- call execl() correctly
-
---- demo/animation3.c.orig 1995-02-08 18:54:17.000000000 +0000
-+++ demo/animation3.c
-@@ -69,16 +69,19 @@
- #include <stdlib.h>
- #include <string.h>
- #include <signal.h>
-+#include <unistd.h>
-+#include <stdint.h>
- #include <sys/types.h>
- #include <sys/stat.h>
- #include "../src/globals.h"
-
-+#define PRINTPTR(n) ((intmax_t)(intptr_t)n)
-
- /* Prototypes
- * ----------
- */
-
--void main _PP((int argc, char *argv[]));
-+int main _PP((int argc, char *argv[]));
- void call_vcg _PP((void));
- void signal_vcg _PP((int k));
- void wait_for_vcg _PP((void));
-@@ -132,9 +135,9 @@ int ins[15] = {
- char timep[20] = "1";
-
- #ifdef ANSI_C
--void main(int argc, char *argv[])
-+int main(int argc, char *argv[])
- #else
--void main(argc, argv)
-+int main(argc, argv)
- int argc;
- char *argv[];
- #endif
-@@ -172,6 +175,7 @@ char *argv[];
- signal_vcg(- SIGUSR2); /* close vcg (does not work with X11) */
- sleep(3);
- signal_vcg(- SIGQUIT); /* exit vcg */
-+ return 0;
- }
-
-
-@@ -224,7 +228,7 @@ void call_vcg()
- #ifdef X11
- "-geometry","200x200-30+30",
- #endif
-- filename,0L);
-+ filename, (char *)NULL);
- }
- /* NEVER REACHED */
-
-@@ -762,8 +766,8 @@ NODE n;
- int i;
- #endif
- {
-- FPRINTF(f," node: { title: \"%d\" label: \"%d\" ",
-- n, n->num);
-+ FPRINTF(f," node: { title: \"%jd\" label: \"%d\" ",
-+ PRINTPTR(n), n->num);
- FPRINTF(f,"width: 34 ");
- FPRINTF(f,"height: 34 ");
-
-@@ -797,8 +801,8 @@ int i;
- if (n->sons==2) {
- print_node(f,n->son[0], 0);
-
-- FPRINTF(f," edge: { sourcename: \"%d\" ", n);
-- FPRINTF(f,"targetname: \"%d\" ", n->son[0]);
-+ FPRINTF(f," edge: { sourcename: \"%jd\" ", PRINTPTR(n));
-+ FPRINTF(f,"targetname: \"%jd\" ", PRINTPTR(n->son[0]));
- if ((n->son[0])->col == RED) {
- FPRINTF(f,"color: red ");
- FPRINTF(f,"linestyle: dotted ");
-@@ -810,8 +814,8 @@ int i;
-
- print_node(f,n->son[1], 1);
-
-- FPRINTF(f," edge: { sourcename: \"%d\" ", n);
-- FPRINTF(f,"targetname: \"%d\" ", n->son[1]);
-+ FPRINTF(f," edge: { sourcename: \"%jd\" ", PRINTPTR(n));
-+ FPRINTF(f,"targetname: \"%jd\" ", PRINTPTR(n->son[1]));
- if ((n->son[1])->col == RED) {
- FPRINTF(f,"color: red ");
- FPRINTF(f,"linestyle: dotted ");
diff --git a/vcg/patches/patch-demo_vcgcount_c b/vcg/patches/patch-demo_vcgcount_c
deleted file mode 100644
index 3782f9b..0000000
--- a/vcg/patches/patch-demo_vcgcount_c
+++ /dev/null
@@ -1,35 +0,0 @@
-$NetBSD: patch-demo_vcgcount_c,v 1.1 2013/04/14 00:15:27 dholland Exp $
-
-- fix void main
-
---- demo/vcgcount.c~ 1995-02-08 11:27:34.000000000 +0000
-+++ demo/vcgcount.c
-@@ -64,7 +64,7 @@
- * ----------
- */
-
--void main _PP((void));
-+int main _PP((void));
-
-
-
-@@ -85,9 +85,9 @@ int nredges; /* The number of edges
- */
-
- #ifdef ANSI_C
--void main(void)
-+int main(void)
- #else
--void main()
-+int main()
- #endif
- {
- register char *c;
-@@ -120,6 +120,7 @@ void main()
- }
- PRINTF("This graph contains %d nodes and %d edges.\n",
- nrnodes, nredges);
-+ return 0;
- }
-
-
diff --git a/vcg/patches/patch-preconf_X11ccSunOS_conf b/vcg/patches/patch-preconf_X11ccSunOS_conf
deleted file mode 100644
index cd53793..0000000
--- a/vcg/patches/patch-preconf_X11ccSunOS_conf
+++ /dev/null
@@ -1,16 +0,0 @@
-$NetBSD: patch-preconf_X11ccSunOS_conf,v 1.1 2013/04/14 00:15:27 dholland Exp $
-
-Fix Sun CC configuration to assume at least C89. Otherwise it tries to
-use <varargs.h> and fails.
-
---- preconf/X11ccSunOS/conf~ 1995-02-08 19:48:39.000000000 +0000
-+++ preconf/X11ccSunOS/conf
-@@ -2,7 +2,7 @@ ADDINCLUDEPATHNAME|-I/RW/esprit/X11R5/R6
- ADDLIBPATHNAME|-L/RW/esprit/X11R5/R6/lib/
- ADDLIBSNAME|-lXext -lX11 -lm
- ALIGNMENTNAME|8
--ANSINAME|#undef ANSI_C
-+ANSINAME|#define ANSI_C
- BIGLTEXNAME|big-latex
- BINPATHNAME|/usr/local/bin/
- BISONNAME|not_available
Home |
Main Index |
Thread Index |
Old Index