CVS commit: pkgsrc/sysutils/pflogsumm

["Brook Milligan" <brook%netbsd.org@localhost>]

Module Name:    pkgsrc
Committed By:   brook
Date:           Wed Sep 30 02:05:08 UTC 2026

Modified Files:
        pkgsrc/sysutils/pflogsumm: Makefile PLIST distinfo
Removed Files:
        pkgsrc/sysutils/pflogsumm/patches: patch-pflogsumm.pl

Log Message:
sysutils/pflogsumm: update to v1.2.0

After a long hiatus, pflogsumm is now getting more active development.
While here, improve Makefile handling of, for example, interpreter
substitution, etc.  Note the new location for upstream.

ChangeLog for pflogsumm [since v1.1.5]

rel-1.2.0       20260422

    This release promotes 1.1.15 from Beta to Production status; no code
    changes have been made since that version.

    The changes since 1.1.6, the last Production release, are substantive,
    including:

        - Config-file support
        - Enhanced TLS reporting
        - Improved parsing accuracy
        - Codebase refactoring for improved maintainability and robustness
        - Numerous usability improvements

    The only other difference with this release is the addition of a
    LICENSE file.

rel-1.1.15      20260313

    Breaking Changes

        Option --smtp-detail

            Did not enable SMTP detail as documented; rather it enabled
            reporting of SMTP session exceptions. These are now always
            reported. --smtp-detail is reserved for future use.

            This switch is deprecated and emits a warning.

        Option --smtpd-warning-detail

            Replaced by --warning-detail.

            This option affected reporting for *all* Postfix services,
            thus the rename.

            --smtpd-warning-detail still works, but is deprecated and
            its use emits a warning.

        Option --debug/-x

            Now requires a filename and writes debug output there.
            STDERR is no longer used for debug messages.

    Un-Breaking Change

        Option --verp-mung

            The <n> argument is once again optional. Although prior
            documentation described it as optional, it accidentally became
            required in v1.1.12. The historical behavior has been restored.

    Bug Fixes

        "Messages with no size data" detection was occasionally mis-firing.
        Fixed.

    Enhancements

        Added --ssl-tls-stats to report

            - SMTP TLS stats
            - SMTPD TLS/SSL errors

            by remote host.

            N.B.: Requires Postfix-3.11 or later for SMTP TLS stats;
            otherwise the requisite SMTP TLS logging data is absent.

        Catches more smtp exceptions

    Several reports (messages expired, deferrals, others) now list only
    FQDNs, rather than FQDNs and associated IP addresses, for reduced noise.

    Major refactoring--eliminating no-op branches, duplicated code,
    questionable logic, and streamlining many regular expressions.
    Extensive regression testing revealed no change in report output
    beyond what's noted above.

    Documentation cleanup and corrections.

rel-1.1.14      20260209

    Bug Fixes

        Date range not displayed in multi-day reports for January (month 0).

    Enhancements

        Now captures and reports messages expired (queue lifetime exceeded).
        Thanks and a tip o' the hat to Bill Carson
        (bill-carlson-at-wkks-dot-org) for bringing this to my attention.

        Modified status line capture to account for new TLS status logging.
        (N.B.: Not currently doing anything with the captured TLS info.)

        Now condenses "Domain <blurfl> does not accept mail (nullMX)" under
        single subheading.

        Added long-form options to doc header and --help output.

    Miscellaneous

        A bit of minor refactoring.

rel-1.1.13      20251023

    Bug Fixes

        Corrected client-info extraction which sometimes extracted the
        wrong bits from log lines. (Bug introduced in v1.1.12.)

        Restored --zero-fill option accidentally dropped in v1.1.12

    Cleanup/Maintenance

        Removed redundant parentheses from several regex capture
        assignments, improving readability without altering behavior.

        Simplified IPv4 octet parsing expression.

        Simplified reject/hold/discard capture assignment.

        Normalized unparsed deferral handling: now labeled as `(unknown
        host)` instead of a fabricated sentence.

        Strip trailing port suffixes from hostnames/IP addresses for
        cleaner aggregation.

        Improved domain normalization in all summaries for better
        host/domain aggregation.

rel-1.1.12      20250819

    *** Breaking Changes ***

        Date::Calc now Required due to date(-range) enhancements.

        UI Changes

            Options using underscores have been restored (reversing
            removal in v1.1.8). Their use now results in a prominent
            "deprecated" message in the report. Support for underscores
            will be removed after a suitable deprecation period. (N.B:
            This was accomplished without re-introducing Bugzilla bug
            1931403.)

            Renamed option --unprocd to --unprocd-file for better clarity.
            (--unprocd was introduced in v1.1.11.)

            Changed --pscrn-detail option to behave like all other
            report-limiting options: Full detail unless this option
            is specified to limit or suppress it.  (--pscrn-detail was
            introduced in v1.1.11.)

    Added support for a config file via --config. Command-line arguments
    override config file for non-boolean options.

        Note: This option requires the Config::Simple Perl module.
        (Only required if --config is used.)

    Added long-form options --date-range, --extended-detail,
    --host-cnt, --quiet, and --user-cnt to facilitate more user-
    friendly configuration files. Short-form options are retained for
    command-line use.

    Added --dump-config as a configuration creation/debugging aid.

    Expanded -d/--date-range options to include today, yesterday, this/last
    week/month, and specific date and date ranges in ISO 8601/RFC 3339 format.

        N.B.: Sadly, the extended date range options come with an
        unavoidable processing performance penalty. This is because the
        only reasonable way to do it was to convert everything into
        decimal values.

    Added --dow0mon (day of week 0 is Monday) for use in conjunction with
    this/last week date ranges. (Default is Sunday.)

    Added support for log entries with RFC 5424/3164-style <PRI> fields and
    optional syslog version (e.g., "<123>1 ...").

    Reports now display a date range at the top when processing multi-day
    or multi-date logs.

    Set default output column width to 80 columns, consistent with
    documentation.

    Squashed another, hopefully the last, bug that would sometimes lead
    to inaccurate tallying of messages received.

    Belated note: --rej-add-from/--rej-add-to always include "<" and
    ">", respectively, since v1.1.7.

rel-1.1.11      20250530

    Now requires Perl v5.10.0 minimum.

    Added support for postscreen summary and detail data:

        --pscrn-stats - display postscreen summary stats

        --pscrn-detail [cnt] - emit detailed postscreen data, optionally
          to the top [cnt] events.

    Improved host/domain/IP address normalization. Now normalizes IPv6
    addresses.

    Bugfix: Potential undefined variable condition in get_smh. (Derives
    seconds, minutes, and hours from seconds.)

    Cosmetic:

        Fixed displayed single-digit day-of-month in report heading when
        "-d <blurfl>" specified. (Broken in v1.1.6)

        Added day-of-week to report heading when "-d <blurfl>" specified.

        Now always displays "Postfix Log Summaries" heading.

    Minor code optimizations to employ defined-or ("//") and reduce
    from List::Util.

    Added -x (debug) option. Debugging emitted to STDERR

    Added --unprocd <filename> option. Unprocessed log lines written to
    specified filename.

rel-1.1.10      20250529

    Bugfix: Messages rejected in latter SMTP processing, after they'd
    already been assigned a queue i.d., were incorrectly counted as
    received.

    Bugfix: postscreen reject detail processing was inadvertently hobbled
    in 1.1.7 as a side-effect of streamlined host/domain/ip-address parsing.
    Fixed.

rel-1.1.9       20250527

    Bugfix: Messages rejected in cleanup were incorrectly counted
    as received.

    Bugfix: In the unlikely (?) event a qid was used more than once
    in the same logfile input only the size of the message with the
    first occurrence of that qid would be counted.

    Bugfix: Eliminated errant debugging message that escaped my
    attention in versions 1.1.7 and 1.1.8.

    Documentation bugfix: "Addresses" misspelled as "adresses." Thanks
    and a tip o' the hat to Sven Hoexter (sven-at-stormbind-dot-net) for
    the heads up.

rel-1.1.8       20250525

    Removed the following deprecated options

        --no_bounce_detail
        --no_deferral_detail
        --no_reject_detail
        --no_smtpd_warnings

    pflogsumm no longer accepts underscores ("_") as part of option
    names. (Note: this finally addresses four-year-old Bugzilla bug
    1931403.)

    Code cleanup: Changed some variable constants to true constants.

    Added test for reject type "BDAT" (Thanks to Maxim,
    admin-at-modum-dot-by, for the heads up.)

    Fixed unitialized $hostID value bug-reported to OpenSUSE. Thanks to
    Sven Uebelacker (uebelhacker) for the bug report.

        I *suspect* that, with an earlier fix I applied, that undefined
        value will no longer occur, but this fix certainly won't hurt
        anything--just in case.

    Added -srs-mung option. Thanks and a tip o' the hat to Tom Hendrikx
    (tom-at-whyscreem-dot-net) for the contribution.

rel-1.1.7       20250524

    Added parsing for "Recipient address triggers...," as in DISCARD on
    recipient actions.

    Improved "deferred" and "bounce" detail

    Added --use-orig-to switch, which causes the value of the "orig_to"
    field to be reported, rather than that of the "to" field, when
    "orig_to" is present.  (This was long-ago requested by Tony Earnshaw
    and was overlooked by me.  My apologies, Tony.)

    Added --rej-add-to switch, which adds the target email address to
    sender and client reject reports.  (This was also long-ago requested
    by Tony Earnshaw.)

        For client rejects this could have created an ambiguity: If only
        either --rej-add-from or --rej-add-to was specified, you'd have
        no way of knowing, after-the-fact, which address was reported.
        So "<" and ">" have been added, to indicate "from" and "to,"
        respectively.  If both are specified, you get "from -> to."

    Added --colwidth switch, to allow adjustment of report's output width.
    (Default remains at 80 columns.)

        N.B.: --verbose-msg-detail overrides

    Now condenses deferrals in a manner similar to bounces.

    Now condenses warnings in a manner similar to reject reports.

    Made count reporting more consistent.  Now each reporting section
    shows the item count in parenthesis (e.g.: "(nn)") or, if the
    count is limited and less than full count, as "(top nn of nn)".
    Suggestion by Michael Rasmussen (michael-at-michaelsnet-dot-us),
    tho not done in the way he suggested.

    Fixed policyd-spf-perl log line detection.

    Fixed conversation/lost connection while sending/receiving deferral
    detection

    Improved "said:" string trimmer to be a mite less aggressive when it
    didn't have to be.

    Improved reject report consolidation.

    In Host/Domain Summary: Message Delivery: Changed "sent cnt" to "msg
    cnt" since we're talking about messages delivered, not necessarily
    "sent," per se.

    Fixed bug in smtpd "disconnect from" parsing and streamlined.

    Removed superfluous additional "bounced" processing

    Caught another warning message

    Catch "Server configuration error" lines.

    Enhanced FQDN/IP addr/domain name parsing (in gimme_domain()):

        . More exhaustive IPv6 address check
        . Handles IPv6-mapped-IPv4 addresses
        . Properly handles the newer, longer TLDs
        . Treats in-addr.arpa and ip6.arpa FQNS like "unknown"s
        . More streamlined

    Added pffrombyto and pftobyfrom command-line utilities to the
    distribution. (Actually in 1.1.6.)

rel-1.1.6       20250522

    Renamed from "pflogsumm.pl" to "pflogsumm"

    Merged Debian patches through 1.1.5-8. Following are excerpted from
    Debian changelog.

        Fix regex in milter-rejects patch. Kudos to Andreas Jaggi
        <debianbug%jaggi.info@localhost> for the report and patch. (Closes:
        #1027829)

        Update postscreen-rejects patch with a fix for IPv6
        addresses. Kudos to Juri Haberland <juri%sapienti-sat.org@localhost>
        for the fix. (Closes: #955627)

        Add patch to count milter rejects provided by Matus Uhlar.

        Import postscreen support patch provided by Matus Uhlar
        d/patches/postscreen-rejects (Closes: #861402)

    Now matches "traditional" log date strings with either leading space
    or leading zero on single-digit days. (Debian bug report 1068425)

    Improvement to "unprocessed" debugging code--used for maintenance only.


To generate a diff of this commit:
cvs rdiff -u -r1.25 -r1.26 pkgsrc/sysutils/pflogsumm/Makefile
cvs rdiff -u -r1.4 -r1.5 pkgsrc/sysutils/pflogsumm/PLIST
cvs rdiff -u -r1.9 -r1.10 pkgsrc/sysutils/pflogsumm/distinfo
cvs rdiff -u -r1.1 -r0 pkgsrc/sysutils/pflogsumm/patches/patch-pflogsumm.pl

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Modified files:

Index: pkgsrc/sysutils/pflogsumm/Makefile
diff -u pkgsrc/sysutils/pflogsumm/Makefile:1.25 pkgsrc/sysutils/pflogsumm/Makefile:1.26
--- pkgsrc/sysutils/pflogsumm/Makefile:1.25     Tue Jun 28 11:36:04 2022
+++ pkgsrc/sysutils/pflogsumm/Makefile  Wed Sep 30 02:05:07 2026
@@ -1,14 +1,12 @@
-# $NetBSD: Makefile,v 1.25 2022/06/28 11:36:04 wiz Exp $
+# $NetBSD: Makefile,v 1.26 2026/09/30 02:05:07 brook Exp $
 #
 
-DISTNAME=              pflogsumm-1.1.5
-PKGREVISION=           #
-PKGREVISION=           3
+DISTNAME=              pflogsumm-1.2.0
 CATEGORIES=            sysutils mail
-MASTER_SITES=          https://jimsun.linxnet.com/downloads/
+MASTER_SITES=          https://athena.linxnet.com/downloads/
 
 MAINTAINER=            pkgsrc-users%NetBSD.org@localhost
-HOMEPAGE=              https://jimsun.linxnet.com/postfix_contrib.html
+HOMEPAGE=              https://athena.linxnet.com/postfix_contrib.html
 COMMENT=               Produce summaries from Postfix syslog data
 LICENSE=               gnu-gpl-v2
 
@@ -16,20 +14,21 @@ DEPENDS+=           p5-Date-Calc-[0-9]*:../../dev
 
 .include "../../mk/bsd.prefs.mk"
 
-NO_CONFIGURE=          yes
+NO_BUILD=              yes
 USE_TOOLS+=            perl:run
 INSTALLATION_DIRS=     ${PKGMANDIR}/man1 sbin share/doc/pflogsumm
 
-do-build:
-       ${SED} 's;/usr/bin/perl;${PERL5};' ${WRKSRC}/pflogsumm.pl \
-           > ${WRKSRC}/pflogsumm
+REPLACE_PERL+=         pffrombyto
+REPLACE_PERL+=         pflogsumm
+REPLACE_PERL+=         pftobyfrom
 
 do-install:
-       ${INSTALL_SCRIPT} ${WRKSRC}/pflogsumm ${DESTDIR}${PREFIX}/sbin
-       ${INSTALL_MAN} ${WRKSRC}/pflogsumm.1 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1
+.for f in pflogsumm pffrombyto pftobyfrom
+       ${INSTALL_SCRIPT} ${WRKSRC}/${f} ${DESTDIR}${PREFIX}/sbin
+       ${INSTALL_MAN} ${WRKSRC}/${f}.1 ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1
+.endfor
 .for doc in ChangeLog README ToDo pflogsumm-faq.txt
        ${INSTALL_DATA} ${WRKSRC}/${doc} ${DESTDIR}${PREFIX}/share/doc/pflogsumm
 .endfor
 
-
 .include "../../mk/bsd.pkg.mk"

Index: pkgsrc/sysutils/pflogsumm/PLIST
diff -u pkgsrc/sysutils/pflogsumm/PLIST:1.4 pkgsrc/sysutils/pflogsumm/PLIST:1.5
--- pkgsrc/sysutils/pflogsumm/PLIST:1.4 Sun Dec  1 04:21:56 2019
+++ pkgsrc/sysutils/pflogsumm/PLIST     Wed Sep 30 02:05:08 2026
@@ -1,6 +1,10 @@
-@comment $NetBSD: PLIST,v 1.4 2019/12/01 04:21:56 kim Exp $
+@comment $NetBSD: PLIST,v 1.5 2026/09/30 02:05:08 brook Exp $
+man/man1/pffrombyto.1
 man/man1/pflogsumm.1
+man/man1/pftobyfrom.1
+sbin/pffrombyto
 sbin/pflogsumm
+sbin/pftobyfrom
 share/doc/pflogsumm/ChangeLog
 share/doc/pflogsumm/README
 share/doc/pflogsumm/ToDo

Index: pkgsrc/sysutils/pflogsumm/distinfo
diff -u pkgsrc/sysutils/pflogsumm/distinfo:1.9 pkgsrc/sysutils/pflogsumm/distinfo:1.10
--- pkgsrc/sysutils/pflogsumm/distinfo:1.9      Tue Oct 26 11:20:00 2021
+++ pkgsrc/sysutils/pflogsumm/distinfo  Wed Sep 30 02:05:08 2026
@@ -1,6 +1,5 @@
-$NetBSD: distinfo,v 1.9 2021/10/26 11:20:00 nia Exp $
+$NetBSD: distinfo,v 1.10 2026/09/30 02:05:08 brook Exp $
 
-BLAKE2s (pflogsumm-1.1.5.tar.gz) = e9e065e48989e4e742aaf110b4c04b83a2c7703d1c9f93d1cdd1fa18381321d8
-SHA512 (pflogsumm-1.1.5.tar.gz) = 994d660692dfea38a1dd9866d15f15035657e85131c1f5a2cd82baa5bd4ad987a00939cb5233f316d2090014c52ae68ef20db0c893f8634969484e0e74678f4d
-Size (pflogsumm-1.1.5.tar.gz) = 47130 bytes
-SHA1 (patch-pflogsumm.pl) = 7ba5a9d347d5b6ed0579c0226d6241d905b928a1
+BLAKE2s (pflogsumm-1.2.0.tar.gz) = f18a2ae6fd016e2037adb473be58d2c1d0081555d91ca1808030ffec20d0e907
+SHA512 (pflogsumm-1.2.0.tar.gz) = e86ee3dc1a5b7f5647227c846e1d468fc1a3226460e3da41e4165b03a74ea4f293d3eaa5111dfd7eea4bee4bee073791370bc42edb184e050245fbde116d4c22
+Size (pflogsumm-1.2.0.tar.gz) = 68115 bytes