pkgsrc-Changes archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

CVS commit: pkgsrc/devel/R-fansi



Module Name:    pkgsrc
Committed By:   mef
Date:           Sun Jun 18 14:42:29 UTC 2023

Modified Files:
        pkgsrc/devel/R-fansi: Makefile distinfo

Log Message:
(devel/R-fansi) Updated 0.5.0 to 1.0.4

# fansi Release Notes

## v1.0.4

CRAN compiled code warning suppression release.

* Fix void function declarations and definitions.
* Change `sprintf` to `snprintf`.

## v1.0.3

* Address problem uncovered by gcc-12 linters, although the issue itself could
  not manifest due to redundancy of checks in the code.

## v1.0.0-2

This is a major release and includes some behavior changes.

### Features

* New functions:
    * [#26](https://github.com/brodieG/fansi/issues/26) Replacement forms of
      `substr_cl` (i.e `substr_ctl<-`).
    * `state_at_end` to compute active state at end of a string.
    * `close_state` to generate a closing sequence given an active state.
    * [#31](https://github.com/brodieG/fansi/issues/31) `trimws_ctl` as an
      equivalent to `trimws`.
    * [#64](https://github.com/brodieG/fansi/issues/64) `normalize_sgr` converts
      compound _Control Sequences_ into normalized form (e.g. "ESC[44;31m"
      becomes "ESC[31mESC[44m") for better compatibility with
      [`crayon`](https://github.com/r-lib/crayon).  Additionally, most functions
      gain a `normalize` parameter so that they may return their output in
      normalized form (h/t @krlmlr).
* [#74](https://github.com/brodieG/fansi/issues/74)`substr_ctl` and related
  functions are now all-C instead of a combination of C offset computations and
  R level `substr` operations.  This greatly improves performance, particularly
  for vectors with many distinct strings.  Despite documentation claiming
  otherwise, `substr_ctl` was quite slow in that case.
* [#66](https://github.com/brodieG/fansi/issues/66) Improved grapheme support,
  including accounting for them in `type="width"` mode, as well as a
  `type="graphemes"` mode to measure in graphemes instead of characters.
  Implementation is based on heuristics designed to work in most common use
  cases.
* `html_esc` gains a `what` parameter to indicate which HTML special characters
  should be escaped.
* Many functions gain `carry` and `terminate` parameters to control how `fansi`
  generated substrings interact with surrounding formats.
* [#71](https://github.com/brodieG/fansi/issues/71) Functions that write SGR and
  OSC are now more parsimonious (see "Behavior Changes" below).
* [#73](https://github.com/brodieG/fansi/issues/73) Default parameter values
  retrieved with `getOption` now always have explicit fallback values defined
  (h/t @gadenbui).
* Better warnings and error messages, including more granular messages for
  `unhandled_ctl` for adjacent _Control Sequences_.
* `term.cap` parameter now accepts "all" as value, like the `ctl` parameter.

### Deprecated Functions

* All the "sgr" functions (e.g., `substr_sgr`, `strwrap_sgr`) are deprecated.
  They will likely live on indefinitely, but they are of limited usefulness and
  with the added support for OSC hyperlinks their name is misleading.
* `sgr_to_html` is now `to_html` with slight modifications to semantics; the old
  function remains and does not warn about unescaped "<" or ">" in the
  input string.

### Behavior Changes

The major intentional behavior change is to default `fansi` to always recognize
true color CSI SGR sequences (e.g. `"ESC[38;2;128;50;245m"`).  The prior
default was to match the active terminal capabilities, but it is unlikely that
the intent of a user manipulating a string with truecolor sequences is to
interpret them incorrectly, even if their terminal does.  `fansi` will continue
to warn in this case.  To keep the pre-1.0 behavior add `"old"` to the
`term.cap` parameter.

Additionally, `to_html` will now warn if it encounters unescaped HTML special
character "<" or ">" in the input string.

Finally, the 1.0 release is an extensive refactoring of many parts of the
SGR and OSC hyperlink controls (_Special Sequences_) intake and output
algorithms.  In some cases this means that some `fansi` functions will output
_Special Sequences_ slightly differently than they did before.  In almost all
cases the rendering of the output should remain unchanged, although there are
some corner cases with changes (e.g. in `strwrap_ctl` SGRs embedded in
whitespace sequences don't break the sequence).

The changes are a side effect of applying more consistent treatment of corner
cases around leading and trailing control sequences and (partially) invalid
control sequences.  Trailing _Special Sequences_ in the output is now omitted as
it would be immediately closed (assuming `terminate=TRUE`, the default).
Leading SGR is interpreted and re-output.

Normally output consistency alone would not be a reason to change behavior, but
in this case the changes should be almost always undetectable in the
**rendered** output, and maintaining old inconsistent behavior in the midst of a
complete refactoring of the internals was beyond my patience.  I apologize if
these behavior changes adversely affect your programs.

> WARNING: we will strive to keep rendered appearance of `fansi` outputs
> consistent across releases, but the exact bytes used in the output of _Special
> Sequences_ may change.

Other changes:

* Tests may no longer pass with R < 4.0 although the package should still
  function correctly.  This is primarily because of changes to the character
  width Unicode Database that ships with R, and many of the newly added grapheme
  tests touch parts of that database that changed (emoji).
* CSI sequences with more than one "intermediate" byte are now considered valid,
  even though they are likely to be very rare, and CSI sequences consume all
  subsequent bytes until a valid closing byte or end of string is encountered.
* `strip_ctl` only warns with malformed CSI and OSC if they are reported as
  supported via the `ctl` parameter.  If CSI and OSC are indicated as not
  supported, but two byte escapes are, the two initial bytes of CSI and OSCs
  will be stripped.
* "unknown" encoded strings are no longer translated to UTF-8 in UTF-8 locales
  (they are instead assumed to be UTF-8).
* `nchar_ctl` preserves `dim`, `dimnames`, and `names` as the base functions do.
* UTF-8 known to be invalid should not be output, even if present in input
  (UTF-8 validation is not complete, only sequences that are obviously wrong are
  detected).

### Bug Fixes

* Fix `tabs_as_spaces` to handle sequential tabs, and to perform better on very
  wide strings.
* Strings with invalid UTF-8 sequences with "unknown" declared encoding in UTF-8
  locales now cause errors instead of being silently translated into byte
  escaped versions (e.g. "\xf0\xc2" (2 bytes), used to be interpreted as
  "<f0><c2>" (four characters).  These now cause errors as they would have if
  they had had "UTF-8" declared encoding.
* In some cases true colors of form "38;2;x;x;x" and "48;2;x;x;x" would only be
  partially transcribed.

### Internal Changes

* More aggressive UTF-8 validation, also, invalid UTF-8 code points now advance
  only one byte instead of their putative width based on the initial byte.
* Reduce peak memory usage by making some intermediate buffers eligible for
  garbage collection prior to native code returning to R.
* Reworked internals to simplify buffer size computation and synchronization, in
  some cases this might cause slightly reduced performance.  Please report any
  significant performance regressions.
* `nchar_ctl(...)` is no longer a wrapper for `nchar(strip_ctl(...))` so that it
  may correctly support grapheme width calculations.


To generate a diff of this commit:
cvs rdiff -u -r1.4 -r1.5 pkgsrc/devel/R-fansi/Makefile \
    pkgsrc/devel/R-fansi/distinfo

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Modified files:

Index: pkgsrc/devel/R-fansi/Makefile
diff -u pkgsrc/devel/R-fansi/Makefile:1.4 pkgsrc/devel/R-fansi/Makefile:1.5
--- pkgsrc/devel/R-fansi/Makefile:1.4   Sat Jun  5 08:05:51 2021
+++ pkgsrc/devel/R-fansi/Makefile       Sun Jun 18 14:42:29 2023
@@ -1,7 +1,7 @@
-# $NetBSD: Makefile,v 1.4 2021/06/05 08:05:51 mef Exp $
+# $NetBSD: Makefile,v 1.5 2023/06/18 14:42:29 mef Exp $
 
 R_PKGNAME=     fansi
-R_PKGVER=      0.5.0
+R_PKGVER=      1.0.4
 CATEGORIES=    devel
 
 MAINTAINER=    wen%NetBSD.org@localhost
Index: pkgsrc/devel/R-fansi/distinfo
diff -u pkgsrc/devel/R-fansi/distinfo:1.4 pkgsrc/devel/R-fansi/distinfo:1.5
--- pkgsrc/devel/R-fansi/distinfo:1.4   Tue Oct 26 10:14:04 2021
+++ pkgsrc/devel/R-fansi/distinfo       Sun Jun 18 14:42:29 2023
@@ -1,5 +1,5 @@
-$NetBSD: distinfo,v 1.4 2021/10/26 10:14:04 nia Exp $
+$NetBSD: distinfo,v 1.5 2023/06/18 14:42:29 mef Exp $
 
-BLAKE2s (R/fansi_0.5.0.tar.gz) = 370df6288ba4f195a7f7aa2232cdcf94205d90d47fe7fac42950467dee35d672
-SHA512 (R/fansi_0.5.0.tar.gz) = cc2c52e5c122d4b99c5af47997ece264e90e7969e40c2f0acca694da8b6b3b6699fa53624ccfeb45e3dfcb3e789865e64e3b8a3c8ba8eac8bddeccb66bb835d4
-Size (R/fansi_0.5.0.tar.gz) = 301724 bytes
+BLAKE2s (R/fansi_1.0.4.tar.gz) = ee56745674fa40574db9abd07bf8d57bf8000f241957976d4b84da0e56d2c420
+SHA512 (R/fansi_1.0.4.tar.gz) = f74a453910eb394ce1ea1969997ce45b3e708b92c1513e48a09e84e5f7137eceabe66e9df279bf7759e2e0316869d4ff91f418e758f8346dce4adc27f7e543ba
+Size (R/fansi_1.0.4.tar.gz) = 482055 bytes



Home | Main Index | Thread Index | Old Index