pkgsrc-Changes archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
CVS commit: pkgsrc/doc
Module Name: pkgsrc
Committed By: rillig
Date: Fri Jun 5 07:34:49 UTC 2020
Modified Files:
pkgsrc/doc: pkgsrc.html pkgsrc.txt
Log Message:
doc/pkgsrc.*: regen
To generate a diff of this commit:
cvs rdiff -u -r1.294 -r1.295 pkgsrc/doc/pkgsrc.html
cvs rdiff -u -r1.292 -r1.293 pkgsrc/doc/pkgsrc.txt
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: pkgsrc/doc/pkgsrc.html
diff -u pkgsrc/doc/pkgsrc.html:1.294 pkgsrc/doc/pkgsrc.html:1.295
--- pkgsrc/doc/pkgsrc.html:1.294 Sat May 30 19:25:38 2020
+++ pkgsrc/doc/pkgsrc.html Fri Jun 5 07:34:49 2020
@@ -121,7 +121,7 @@
builds)</a></span></dt>
<dd><dl>
<dt><span class="sect1"><a href="#bulk.pre">8.1. Preparations</a></span></dt>
-<dt><span class="sect1"><a href="#bulk.pbulk">8.2. Running a pbulk-style bulk build</a></span></dt>
+<dt><span class="sect1"><a href="#bulk.pbulk">8.2. Running a bulk build</a></span></dt>
<dd><dl><dt><span class="sect2"><a href="#bulk.pbulk.conf">8.2.1. Configuration</a></span></dt></dl></dd>
<dt><span class="sect1"><a href="#bulk.req">8.3. Requirements of a full bulk build</a></span></dt>
<dt><span class="sect1"><a href="#bulk.var">8.4. Bulk build variants</a></span></dt>
@@ -878,7 +878,7 @@ minutes!</p>
builds)</a></span></dt>
<dd><dl>
<dt><span class="sect1"><a href="#bulk.pre">8.1. Preparations</a></span></dt>
-<dt><span class="sect1"><a href="#bulk.pbulk">8.2. Running a pbulk-style bulk build</a></span></dt>
+<dt><span class="sect1"><a href="#bulk.pbulk">8.2. Running a bulk build</a></span></dt>
<dd><dl><dt><span class="sect2"><a href="#bulk.pbulk.conf">8.2.1. Configuration</a></span></dt></dl></dd>
<dt><span class="sect1"><a href="#bulk.req">8.3. Requirements of a full bulk build</a></span></dt>
<dt><span class="sect1"><a href="#bulk.var">8.4. Bulk build variants</a></span></dt>
@@ -2086,7 +2086,7 @@ builds)</h2></div></div></div>
<p><b>Table of Contents</b></p>
<dl class="toc">
<dt><span class="sect1"><a href="#bulk.pre">8.1. Preparations</a></span></dt>
-<dt><span class="sect1"><a href="#bulk.pbulk">8.2. Running a pbulk-style bulk build</a></span></dt>
+<dt><span class="sect1"><a href="#bulk.pbulk">8.2. Running a bulk build</a></span></dt>
<dd><dl><dt><span class="sect2"><a href="#bulk.pbulk.conf">8.2.1. Configuration</a></span></dt></dl></dd>
<dt><span class="sect1"><a href="#bulk.req">8.3. Requirements of a full bulk build</a></span></dt>
<dt><span class="sect1"><a href="#bulk.var">8.4. Bulk build variants</a></span></dt>
@@ -2141,8 +2141,8 @@ certain packages tried to install files
</div>
<div class="sect1">
<div class="titlepage"><div><div><h2 class="title" style="clear: both">
-<a name="bulk.pbulk"></a>8.2.�Running a pbulk-style bulk build</h2></div></div></div>
-<p>Running a pbulk-style bulk build works roughly as follows:</p>
+<a name="bulk.pbulk"></a>8.2.�Running a bulk build</h2></div></div></div>
+<p>Running a bulk build works roughly as follows:</p>
<div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; ">
<li class="listitem"><p>First, build the pbulk infrastructure in a fresh pkgsrc location.</p></li>
<li class="listitem"><p>Then, build each of the packages from a clean installation directory using the infrastructure.</p></li>
@@ -6373,12 +6373,10 @@ ${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${site
<code class="filename">.rej</code> are ignored. Any special options to
<a class="citerefentry" href="https://netbsd.gw.com/cgi-bin/man-cgi?patch+1.i386+NetBSD-9.0";><span class="citerefentry"><span class="refentrytitle">patch</span>(1)</span></a> can be handed in
<code class="varname">PATCH_DIST_ARGS</code>. See <a class="xref" href="#components.patches" title="13.3.�patches/*">Section�13.3, “<code class="filename">patches/*</code>”</a> for
more details.</p>
-<p>By default <a class="citerefentry" href="https://netbsd.gw.com/cgi-bin/man-cgi?patch+1.i386+NetBSD-9.0";><span class="citerefentry"><span class="refentrytitle">patch</span>(1)</span></a> is given
special args to make
- it fail if the patches apply with some lines of fuzz. Please
- fix (regen) the patches so that they apply cleanly. The
- rationale behind this is that patches that don't apply cleanly
- may end up being applied in the wrong place, and cause severe
- harm there.</p>
+<p>By default <a class="citerefentry" href="https://netbsd.gw.com/cgi-bin/man-cgi?patch+1.i386+NetBSD-9.0";><span class="citerefentry"><span class="refentrytitle">patch</span>(1)</span></a> is given
special arguments to make it
+ fail if the expected text from the patch context is not found in the
+ patched file. If that happens, fix the patch file by comparing it
+ with the actual text in the file to be patched.</p>
</div>
<div class="sect1">
<div class="titlepage"><div><div><h2 class="title" style="clear: both">
@@ -7680,74 +7678,221 @@ DISTNAME= foo-17.43
<div class="sect2">
<div class="titlepage"><div><div><h3 class="title">
<a name="fixes.subst"></a>21.1.11.�Substituting variable text in the package files (the SUBST framework)</h3></div></div></div>
-<p>When you want to replace the same text in multiple files
- or when the replacement text varies, patches alone cannot help.
- This is where the SUBST framework comes in. It provides an
- easy-to-use interface for replacing text in files.
- It just needs the following information:</p>
-<div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; ">
-<li class="listitem"><p><span class="emphasis"><em>When</em></span> should the replacement
+<p>When you want to replace the same text in multiple files, or
+multiple times in the same file, it is cumbersome to maintain a patch
+file for this. This is where the SUBST framework steps in. It provides an
+easy-to-use interface for replacing text in files. It just needs the
+following information:</p>
+<div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; ">
+<li class="listitem"><p>In which phase of the package build cycle should the
+replacement happen?</p></li>
+<li class="listitem"><p>In which files should the replacement
happen?</p></li>
-<li class="listitem"><p><span class="emphasis"><em>Where</em></span> should the replacement happen,
-i.e. in which files?</p></li>
-<li class="listitem"><p><span class="emphasis"><em>Which</em></span> text should be
-replaced with what?</p></li>
+<li class="listitem"><p>Which text should be replaced with
+what?</p></li>
</ul></div>
<p>This information is encoded in a block of <code class="varname">SUBST</code>
-variables, like in this example:</p>
+variables. A minimal example is:</p>
+<pre class="programlisting">
+SUBST_CLASSES+= paths
+SUBST_STAGE.paths= pre-configure
+SUBST_FILES.paths= src/*.c
+SUBST_SED.paths= -e 's,/usr/local,${PREFIX},g'
+</pre>
+<p>Translated into English, it means: In the pre-configure stage (that
+is, after applying the patches from the patches/ directory and before
+running the configure script and the portability check), replace the text
+<code class="literal">/usr/local</code> with the content of the variable
+<code class="varname">PREFIX</code>.</p>
+<p>Each SUBST block starts by appending an identifier to
+<code class="varname">SUBST_CLASSES</code> (note the <code class="literal">+=</code>). This
+identifier can be chosen freely by the package. If there should ever be
+duplicate identifiers, the pkgsrc infrastructure will catch this and fail
+early, so don't worry about name collisions.</p>
+<p>Except for <code class="varname">SUBST_CLASSES</code>, all variables in a
+SUBST block are parameterized using this identifier. In the remainder of
+this section, these parameterized variables are written as
+<code class="varname">SUBST_STAGE.*</code>.</p>
+<pre class="programlisting">
+SUBST_CLASSES+= paths
+SUBST_STAGE.paths= pre-configure
+SUBST_MESSAGE.paths= Fixing absolute paths.
+SUBST_FILES.paths= src/*.c
+SUBST_FILES.paths+= scripts/*.sh
+SUBST_SED.paths= -e 's,"/usr/local,"${PREFIX},g'
+SUBST_SED.paths+= -e 's,"/var/log,"${VARBASE}/log,g'
+SUBST_VARS.paths= LOCALBASE PREFIX PKGVERSION
+</pre>
+<p>To get a complete picture about the SUBST substitutions, run
+<span class="command"><strong>bmake show-all-subst</strong></span>. If something doesn't work as
+expected, run pkglint on the package, which detects several typical
+mistakes surrounding the SUBST blocks. For any questions that might
+remain after this, have a look at
+<code class="filename">mk/subst.mk</code>.</p>
+<div class="sect3">
+<div class="titlepage"><div><div><h4 class="title">
+<a name="fixes.subst.when"></a>21.1.11.1.�Choosing the time where the substitutions happen</h4></div></div></div>
+<p>The <code class="varname">SUBST_STAGE.*</code> is one of
+{pre,do,post}-{extract,patch,configure,build,test,install}. Of these,
+<code class="literal">pre-configure</code> is used most often, by far. The most
+popular stages are, in chronological order:</p>
+<div class="variablelist"><dl class="variablelist">
+<dt><span class="term"><code class="literal">post-extract</code></span></dt>
+<dd>
+<p>The substitutions are applied immediately after the
+distfiles are extracted. Running <span class="command"><strong>bmake extract</strong></span> on the
+package will leave no traces of the original files.</p>
+<p>When the substitution applies to files for which there is also a
+patch in the <code class="filename">patches/</code> directory, this means that the
+patches will be computed based on the result of the substitution. When
+these patches are sent to the upstream maintainer later, to be fixed in
+the upstream package, these patches may no longer match what the upstream
+author is used to. Because of this, <code class="literal">pre-configure</code> is
+often a better choice.</p>
+</dd>
+<dt><span class="term"><code class="literal">pre-configure</code></span></dt>
+<dd>
+<p>The substitutions are applied after the patches from the
+<code class="filename">patches/</code> directory. This makes it possible to run
+<span class="command"><strong>bmake patch</strong></span> on the package, after which the patches
+can be edited using the tools pkgvi and mkpatches from the <a href="https://cdn.NetBSD.org/pub/pkgsrc/current/pkgsrc/pkgtools/pkgdiff/README.html"; target="_top"><code
class="filename">pkgtools/pkgdiff</code></a> package.</p>
+<p>When updating the patches, it is helpful to explicitly separate the
+<span class="command"><strong>bmake patch</strong></span> from the <span class="command"><strong>bmake
+configure</strong></span>, and to only edit the patches between these commands.
+Otherwise the substitutions from the SUBST block will end up in the patch
+file. When this happens in really obvious ways, pkglint will complain
+about patches that contain a hard-coded <code class="literal">/usr/pkg</code>
+instead of the correct and intended <code class="literal">@PREFIX@</code>, but it
+can only detect these really obvious
+cases.</p>
+</dd>
+<dt><span class="term"><code class="literal">do-configure</code></span></dt>
+<dd><p>This stage should only be used if the package defines a
+<code class="literal">pre-configure</code> action itself, and the substitution must
+happen after that. Typical examples are packages that use the
+<code class="literal">pre-configure</code> stage to regenerate the GNU configure
+script from
+<code class="filename">configure.ac</code>.</p></dd>
+<dt><span class="term"><code class="literal">post-configure</code></span></dt>
+<dd><p>This stage is used to fix up any mistakes by the
+configure stage.</p></dd>
+<dt><span class="term"><code class="literal">pre-build</code></span></dt>
+<dd><p>This stage should only be used for substitutions that are
+clearly related to building the package, not for fixing the
+configuration. Substitutions for pathnames (such as replacing
+<code class="filename">/usr/local</code> with <code class="literal">${PREFIX}</code>) or
+user names (such as replacing <code class="literal">@MY_USER@</code> with the
+actual username) belong in pre-configure or post-configure
+instead.</p></dd>
+<dt><span class="term"><code class="literal">post-build</code></span></dt>
+<dd>
+<p>Just as with pre-build, this stage should only be used
+for substitutions that are clearly related to building the package, not
+for fixing the configuration. Substitutions for pathnames (such as
+replacing <code class="filename">/usr/local</code> with
+<code class="literal">${PREFIX}</code>) or user names (such as replacing
+<code class="literal">@MY_USER@</code> with the actual username) belong in
+pre-configure or post-configure instead.</p>
+<p>A typical use is to update pkg-config files to include the rpath
+compiler options.</p>
+</dd>
+<dt><span class="term"><code class="literal">pre-install</code></span></dt>
+<dd><p>In general, the install phase should be as simple as
+possible. As with the pre-build and post-build stages, it should not be
+used to fix pathnames or user names, these belong in pre-configure
+instead. There are only few legitimate use cases for applying
+substitutions in this stage.</p></dd>
+</dl></div>
+</div>
+<div class="sect3">
+<div class="titlepage"><div><div><h4 class="title">
+<a name="fixes.subst.where"></a>21.1.11.2.�Choosing the time where the substitutions happen</h4></div></div></div>
+<p>The <code class="varname">SUBST_FILES.*</code> variable contains a list of
+filename patterns. These patterns are relative to
+<code class="varname">WRKSRC</code> since that is where most substitutions happen.
+A typical example is:</p>
+<pre class="programlisting">
+SUBST_FILES.path= Makefile */Makefile */*/Makefile *.[ch]
+</pre>
+<p>The above patterns, especially the last, are quite broad. The SUBST
+implementation checks that each filename pattern that is mentioned here
+has an effect. For example, if none of the
+<code class="filename">*/*/Makefile</code> files contains the patterns to be found
+and substituted, that filename pattern is redundant and should be left
+out. If the text to be substituted occurs in some of the files from a
+single pattern, but not in all of them, that is totally ok, and the SUBST
+framework will only print an INFO message for those files.</p>
+<p>If there is a good reason for having redundant filename patterns,
+set <code class="varname">SUBST_NOOP_OK.path=yes</code> in the above
+example.</p>
+<p>Another popular way of choosing the files for the substitutions is
+via a shell command, like this:</p>
+<pre class="programlisting">
+C_FILES_CMD= cd ${WRKSRC} && ${FIND} -name '*.c'
+SUBST_FILES.path= ${C_FILES_CMD:sh}
+</pre>
+<p>The variable name <code class="varname">C_FILES_CMD</code> in this example is
+freely chosen and independent of the SUBST framework.</p>
+<p>In this variant, the <code class="varname">SUBST_FILES.*</code> variable
+lists each file individually. Thereby chances are higher that there are
+filename patterns in which no substitution happens. Since the SUBST
+framework cannot know whether the filename patterns in
+<code class="varname">SUBST_FILES.*</code> have been explicitly listed in the
+Makefile (where any redundant filename pattern would be suspicious) or
+been generated by a shell command (in which redundant filename patterns
+are more likely and to be expected), it will complain about these
+redundant filename patterns. Therefore, SUBST blocks that use a shell
+command to generate the list of filename patterns often need to set
+<code class="varname">SUBST_NOOP_OK.*</code> to <code class="literal">yes</code>.</p>
+</div>
+<div class="sect3">
+<div class="titlepage"><div><div><h4 class="title">
+<a name="fixes.subst.what"></a>21.1.11.3.�Choosing what to substitute</h4></div></div></div>
+<p>In most cases, the substitutions are given using one or more
+<a class="citerefentry" href="https://netbsd.gw.com/cgi-bin/man-cgi?sed+1.i386+NetBSD-9.0";><span class="citerefentry"><span class="refentrytitle">sed</span>(1)</span></a> commands, like this:</p>
+<pre class="programlisting">
+SUBST_SED.path= -e 's|/usr/local|${PREFIX}|g'
+</pre>
+<p>Each of the sed commands needs to be preceded by the
+<code class="literal">-e</code> option and should be specified on a line of its
+own, to avoid hiding short sed commands at the end of a line.</p>
+<p>Since the sed commands often contain shell metacharacters as the
+separator (the <code class="literal">|</code> in the above example), it is common
+to enclose them in single quotes.</p>
+<p>A common substitution is to replace placeholders of the form
+<code class="literal">@VARNAME@</code> with their pkgsrc counterpart variable
+<code class="literal">${VARNAME}</code>. A typical example is:</p>
+<pre class="programlisting">
+SUBST_VARS.path= PREFIX
+</pre>
+<p>This type of substitutions is typically done by the GNU configure
+scripts, but in some cases these need to be overridden. The same pattern
+is also used when a package defines patches that replace previously
+hard-coded paths like <code class="literal">/usr/local</code> with a
+<code class="literal">@PREFIX@</code> placeholder first, which then gets
+substituted by the actual <code class="literal">${PREFIX}</code> in the
+pre-configure stage. In many of these cases, it works equally well to
+just use the SUBST framework to directly replace
+<code class="literal">/usr/local</code> with <code class="literal">${PREFIX}</code>, thereby
+omitting the intermediate patch file.</p>
+<p>If the above is not flexible enough, it is possible to not use sed
+at all for the substitution but to specify an entirely different command,
+like this:</p>
<pre class="programlisting">
-SUBST_CLASSES+= fix-paths
-SUBST_STAGE.fix-paths= pre-configure
-SUBST_MESSAGE.fix-paths= Fixing absolute paths.
-SUBST_FILES.fix-paths= src/*.c
-SUBST_FILES.fix-paths+= scripts/*.sh
-SUBST_SED.fix-paths= -e 's,"/usr/local,"${PREFIX},g'
-SUBST_SED.fix-paths+= -e 's,"/var/log,"${VARBASE}/log,g'
-</pre>
-<p><code class="varname">SUBST_CLASSES</code> is a list of identifiers
- that are used to identify the different SUBST blocks that are
- defined. The SUBST framework is heavily used by pkgsrc, so it is
- important to always use the <code class="literal">+=</code> operator with
- this variable. Otherwise some substitutions may be skipped.</p>
-<p>The remaining variables of each SUBST block are
- parameterized with the identifier from the first line
- (<code class="literal">fix-paths</code> in this case.) They can be seen as
- parameters to a function call.</p>
-<p><code class="varname">SUBST_STAGE.*</code> specifies the stage at
- which the replacement will take place. All combinations of
- <code class="literal">pre-</code>, <code class="literal">do-</code> and
- <code class="literal">post-</code> together with a phase name are
- possible, though only few are actually used. Most commonly used
- are <code class="literal">post-patch</code> and
- <code class="literal">pre-configure</code>. Of these two,
- <code class="literal">pre-configure</code> should be preferred because
- then it is possible to run <span class="command"><strong>bmake patch</strong></span> and
- have the state after applying the patches but before making any
- other changes. This is especially useful when you are debugging
- a package in order to create new patches for it. Similarly,
- <code class="literal">post-build</code> is preferred over
- <code class="literal">pre-install</code>, because the install phase should
- generally be kept as simple as possible. When you use
- <code class="literal">post-build</code>, you have the same files in the
- working directory that will be installed later, so you can check
- if the substitution has succeeded.</p>
-<p><code class="varname">SUBST_MESSAGE.*</code> is an optional text
- that is printed just before the substitution is done.</p>
-<p><code class="varname">SUBST_FILES.*</code> is the list of shell
- globbing patterns that specifies the files in which the
- substitution will take place. The patterns are interpreted
- relatively to the <code class="varname">WRKSRC</code> directory.</p>
-<p><code class="varname">SUBST_SED.*</code> is a list of arguments to
- <a class="citerefentry" href="https://netbsd.gw.com/cgi-bin/man-cgi?sed+1.i386+NetBSD-9.0";><span class="citerefentry"><span class="refentrytitle">sed</span>(1)</span></a> that specify the actual
substitution. Every sed
- command should be prefixed with <code class="literal">-e</code>, so that
- all SUBST blocks look uniform.</p>
-<p><code class="varname">SUBST_VARS.*</code> is a list of variable names.
- For each of these variables, the text <code class="literal">@VAR@</code> is
- replaced with the value of the variable
- <code class="varname">VAR</code>.</p>
-<p>There are some more variables, but they are so seldomly
- used that they are only documented in the
- <code class="filename">mk/subst.mk</code> file.</p>
+SUBST_FILTER_CMD.path= LC_ALL=C ${TR} -d '\r'
+</pre>
+<p>This is used for the few remaining packages in which the
+distributed files use Windows-style line endings that need to be
+converted to UNIX-style line endings.</p>
+</div>
+<div class="sect3">
+<div class="titlepage"><div><div><h4 class="title">
+<a name="fixes.subst.other"></a>21.1.11.4.�Other SUBST variables</h4></div></div></div>
+<p>When a SUBST block is applied during a package build, a message is
+logged. The default message is fine for most purposes but can be
+overridden by setting <code class="literal">SUBST_MESSAGE.*</code> to an individual
+message.</p>
+</div>
</div>
</div>
<div class="sect1">
@@ -11109,2644 +11254,2644 @@ source packages</h2></div></div></div>
<td>CHECKOUT_DATE</td>
</tr>
<tr>
+<td>CHECK_COMPILER</td>
<td>CHECK_FAKEHOME</td>
-<td>CHECK_FILES</td>
</tr>
<tr>
+<td>CHECK_FILES</td>
<td>CHECK_FILES_SKIP</td>
-<td>CHECK_FILES_STRICT</td>
</tr>
<tr>
+<td>CHECK_FILES_STRICT</td>
<td>CHECK_HEADERS</td>
-<td>CHECK_HEADERS_SKIP</td>
</tr>
<tr>
+<td>CHECK_HEADERS_SKIP</td>
<td>CHECK_INTERPRETER</td>
-<td>CHECK_INTERPRETER_SKIP</td>
</tr>
<tr>
+<td>CHECK_INTERPRETER_SKIP</td>
<td>CHECK_PERMS</td>
-<td>CHECK_PERMS_AUTOFIX</td>
</tr>
<tr>
+<td>CHECK_PERMS_AUTOFIX</td>
<td>CHECK_PERMS_SKIP</td>
-<td>CHECK_PORTABILITY</td>
</tr>
<tr>
+<td>CHECK_PORTABILITY</td>
<td>CHECK_PORTABILITY_EXPERIMENTAL</td>
-<td>CHECK_PORTABILITY_SKIP</td>
</tr>
<tr>
+<td>CHECK_PORTABILITY_SKIP</td>
<td>CHECK_RELRO</td>
-<td>CHECK_RELRO_SKIP</td>
</tr>
<tr>
+<td>CHECK_RELRO_SKIP</td>
<td>CHECK_RELRO_SUPPORTED</td>
-<td>CHECK_SHLIBS</td>
</tr>
<tr>
+<td>CHECK_SHLIBS</td>
<td>CHECK_SHLIBS_BLACKLIST</td>
-<td>CHECK_SHLIBS_SKIP</td>
</tr>
<tr>
+<td>CHECK_SHLIBS_SKIP</td>
<td>CHECK_SHLIBS_SUPPORTED</td>
-<td>CHECK_SSP</td>
</tr>
<tr>
+<td>CHECK_SSP</td>
<td>CHECK_SSP_SKIP</td>
-<td>CHECK_SSP_SUPPORTED</td>
</tr>
<tr>
+<td>CHECK_SSP_SUPPORTED</td>
<td>CHECK_STRIPPED</td>
-<td>CHECK_STRIPPED_SKIP</td>
</tr>
<tr>
+<td>CHECK_STRIPPED_SKIP</td>
<td>CHECK_WRKREF</td>
-<td>CHECK_WRKREF_EXTRA_DIRS</td>
</tr>
<tr>
+<td>CHECK_WRKREF_EXTRA_DIRS</td>
<td>CHECK_WRKREF_SKIP</td>
-<td>CLAMAV_DBDIR</td>
</tr>
<tr>
+<td>CLAMAV_DBDIR</td>
<td>CLAMAV_GROUP</td>
-<td>CLAMAV_USER</td>
</tr>
<tr>
+<td>CLAMAV_USER</td>
<td>CLANGBASE</td>
-<td>CLEANDEPENDS</td>
</tr>
<tr>
+<td>CLEANDEPENDS</td>
<td>CMAKE_DEPENDENCIES_REWRITE</td>
-<td>CMAKE_INSTALL_PREFIX</td>
</tr>
<tr>
+<td>CMAKE_INSTALL_PREFIX</td>
<td>CMAKE_MODULE_PATH_OVERRIDE</td>
-<td>CMAKE_PKGSRC_BUILD_FLAGS</td>
</tr>
<tr>
+<td>CMAKE_PKGSRC_BUILD_FLAGS</td>
<td>CMAKE_PREFIX_PATH</td>
-<td>CMAKE_USE_GNU_INSTALL_DIRS</td>
</tr>
<tr>
+<td>CMAKE_USE_GNU_INSTALL_DIRS</td>
<td>COMMON_LISP_DOCFILES</td>
-<td>COMMON_LISP_EXAMPLES</td>
</tr>
<tr>
+<td>COMMON_LISP_EXAMPLES</td>
<td>COMMON_LISP_EXTRAFILES</td>
-<td>COMMON_LISP_PACKAGES</td>
</tr>
<tr>
+<td>COMMON_LISP_PACKAGES</td>
<td>COMMON_LISP_SYSTEM</td>
-<td>COMPILER_RPATH_FLAG</td>
</tr>
<tr>
+<td>COMPILER_RPATH_FLAG</td>
<td>COMPILER_USE_SYMLINKS</td>
-<td>CONFIGURE_ARGS</td>
</tr>
<tr>
+<td>CONFIGURE_ARGS</td>
<td>CONFIGURE_DIRS</td>
-<td>CONFIGURE_ENV</td>
</tr>
<tr>
+<td>CONFIGURE_ENV</td>
<td>CONFIGURE_ENV_SHELL</td>
-<td>CONFIGURE_HAS_INFODIR</td>
</tr>
<tr>
+<td>CONFIGURE_HAS_INFODIR</td>
<td>CONFIGURE_HAS_MANDIR</td>
-<td>CONFIGURE_SCRIPT</td>
</tr>
<tr>
+<td>CONFIGURE_SCRIPT</td>
<td>CONFIG_SHELL</td>
-<td>CONFIG_SHELL_FLAGS</td>
</tr>
<tr>
+<td>CONFIG_SHELL_FLAGS</td>
<td>CONF_FILES</td>
-<td>CONF_FILES_MODE</td>
</tr>
<tr>
+<td>CONF_FILES_MODE</td>
<td>CONF_FILES_PERMS</td>
-<td>CONSERVER_DEFAULTHOST</td>
</tr>
<tr>
+<td>CONSERVER_DEFAULTHOST</td>
<td>CONSERVER_DEFAULTPORT</td>
-<td>CP</td>
</tr>
<tr>
+<td>CP</td>
<td>CPP</td>
-<td>CPP_PRECOMP_FLAGS</td>
</tr>
<tr>
+<td>CPP_PRECOMP_FLAGS</td>
<td>CREATE_WRKDIR_SYMLINK</td>
-<td>CROSSBASE</td>
</tr>
<tr>
+<td>CROSSBASE</td>
<td>CTFCONVERT</td>
-<td>CTF_FILES_SKIP</td>
</tr>
<tr>
+<td>CTF_FILES_SKIP</td>
<td>CTF_SUPPORTED</td>
-<td>CTYPE</td>
</tr>
<tr>
+<td>CTYPE</td>
<td>CUPS_GROUP</td>
-<td>CUPS_SYSTEM_GROUPS</td>
</tr>
<tr>
+<td>CUPS_SYSTEM_GROUPS</td>
<td>CUPS_USER</td>
-<td>CURSES_DEFAULT</td>
</tr>
<tr>
+<td>CURSES_DEFAULT</td>
<td>CURSES_TYPE</td>
-<td>CVS_EXTRACTDIR</td>
</tr>
<tr>
+<td>CVS_EXTRACTDIR</td>
<td>CVS_MODULE</td>
-<td>CVS_PROJECT</td>
</tr>
<tr>
+<td>CVS_PROJECT</td>
<td>CVS_REPOSITORIES</td>
-<td>CVS_ROOT</td>
</tr>
<tr>
+<td>CVS_ROOT</td>
<td>CVS_ROOT_GNU</td>
-<td>CVS_ROOT_NONGNU</td>
</tr>
<tr>
+<td>CVS_ROOT_NONGNU</td>
<td>CVS_ROOT_SOURCEFORGE</td>
-<td>CVS_TAG</td>
</tr>
<tr>
+<td>CVS_TAG</td>
<td>CXX</td>
-<td>CYRUS_GROUP</td>
</tr>
<tr>
+<td>CYRUS_GROUP</td>
<td>CYRUS_IDLE</td>
-<td>CYRUS_USER</td>
</tr>
<tr>
+<td>CYRUS_USER</td>
<td>DAEMONTOOLS_GROUP</td>
-<td>DAEMONTOOLS_LOG_USER</td>
</tr>
<tr>
+<td>DAEMONTOOLS_LOG_USER</td>
<td>DBUS_GROUP</td>
-<td>DBUS_USER</td>
</tr>
<tr>
+<td>DBUS_USER</td>
<td>DEFANG_GROUP</td>
-<td>DEFANG_USER</td>
</tr>
<tr>
+<td>DEFANG_USER</td>
<td>DEFAULT_ACCEPTABLE_LICENSES</td>
-<td>DEFAULT_DISTFILES</td>
</tr>
<tr>
+<td>DEFAULT_DISTFILES</td>
<td>DEFAULT_IRC_SERVER</td>
-<td>DEFAULT_SERIAL_DEVICE</td>
</tr>
<tr>
+<td>DEFAULT_SERIAL_DEVICE</td>
<td>DEF_UMASK</td>
-<td>DEINSTALLDEPENDS</td>
</tr>
<tr>
+<td>DEINSTALLDEPENDS</td>
<td>DEINSTALL_SRC</td>
-<td>DEINSTALL_TEMPLATES</td>
</tr>
<tr>
+<td>DEINSTALL_TEMPLATES</td>
<td>DELAYED_ERROR_MSG</td>
-<td>DELAYED_WARNING_MSG</td>
</tr>
<tr>
+<td>DELAYED_WARNING_MSG</td>
<td>DEPENDS</td>
-<td>DEPENDS_TARGET</td>
</tr>
<tr>
+<td>DEPENDS_TARGET</td>
<td>DEPENDS_TYPE</td>
-<td>DESTDIR</td>
</tr>
<tr>
+<td>DESTDIR</td>
<td>DESTDIR_VARNAME</td>
-<td>DIALER_GROUP</td>
</tr>
<tr>
+<td>DIALER_GROUP</td>
<td>DIGEST_REQD</td>
-<td>DISTDIR</td>
</tr>
<tr>
+<td>DISTDIR</td>
<td>DISTFILES</td>
-<td>DISTINFO_FILE</td>
</tr>
<tr>
+<td>DISTINFO_FILE</td>
<td>DISTNAME</td>
-<td>DIST_PATH</td>
</tr>
<tr>
+<td>DIST_PATH</td>
<td>DIST_SUBDIR</td>
-<td>DJBDNS_AXFR_USER</td>
</tr>
<tr>
+<td>DJBDNS_AXFR_USER</td>
<td>DJBDNS_CACHE_USER</td>
-<td>DJBDNS_DJBDNS_GROUP</td>
</tr>
<tr>
+<td>DJBDNS_DJBDNS_GROUP</td>
<td>DJBDNS_LOG_USER</td>
-<td>DJBDNS_RBL_USER</td>
</tr>
<tr>
+<td>DJBDNS_RBL_USER</td>
<td>DJBDNS_TINY_USER</td>
-<td>DLOPEN_REQUIRE_PTHREADS</td>
</tr>
<tr>
+<td>DLOPEN_REQUIRE_PTHREADS</td>
<td>DL_AUTO_VARS</td>
-<td>DL_CFLAGS</td>
</tr>
<tr>
+<td>DL_CFLAGS</td>
<td>DL_LDFLAGS</td>
-<td>DL_LIBS</td>
</tr>
<tr>
+<td>DL_LIBS</td>
<td>DNS</td>
-<td>DOWNLOADED_DISTFILE</td>
</tr>
<tr>
+<td>DOWNLOADED_DISTFILE</td>
<td>DT_LAYOUT</td>
-<td>DYNAMIC_SITES_CMD</td>
</tr>
<tr>
+<td>DYNAMIC_SITES_CMD</td>
<td>DYNAMIC_SITES_SCRIPT</td>
-<td>ECHO</td>
</tr>
<tr>
+<td>ECHO</td>
<td>ECHO_N</td>
-<td>ELK_GUI</td>
</tr>
<tr>
+<td>ELK_GUI</td>
<td>EMACS_TYPE</td>
-<td>EMULDIR</td>
</tr>
<tr>
+<td>EMULDIR</td>
<td>EMULSUBDIR</td>
-<td>EMULSUBDIRSLASH</td>
</tr>
<tr>
+<td>EMULSUBDIRSLASH</td>
<td>EMUL_ARCH</td>
-<td>EMUL_DISTRO</td>
</tr>
<tr>
+<td>EMUL_DISTRO</td>
<td>EMUL_EXEC_FMT</td>
-<td>EMUL_IS_NATIVE</td>
</tr>
<tr>
+<td>EMUL_IS_NATIVE</td>
<td>EMUL_MODULES</td>
-<td>EMUL_OPSYS</td>
</tr>
<tr>
+<td>EMUL_OPSYS</td>
<td>EMUL_PKG_FMT</td>
-<td>EMUL_PLATFORM</td>
</tr>
<tr>
+<td>EMUL_PLATFORM</td>
<td>EMUL_PLATFORMS</td>
-<td>EMUL_PREFER</td>
</tr>
<tr>
+<td>EMUL_PREFER</td>
<td>EMUL_REQD</td>
-<td>EMUL_TYPE</td>
</tr>
<tr>
+<td>EMUL_TYPE</td>
<td>ERROR_MSG</td>
-<td>EXIM_GROUP</td>
</tr>
<tr>
+<td>EXIM_GROUP</td>
<td>EXIM_USER</td>
-<td>EXPORT_SYMBOLS_LDFLAGS</td>
</tr>
<tr>
+<td>EXPORT_SYMBOLS_LDFLAGS</td>
<td>EXTRACTOR</td>
-<td>EXTRACT_CMD</td>
</tr>
<tr>
+<td>EXTRACT_CMD</td>
<td>EXTRACT_CMD_DEFAULT</td>
-<td>EXTRACT_DIR</td>
</tr>
<tr>
+<td>EXTRACT_DIR</td>
<td>EXTRACT_ELEMENTS</td>
-<td>EXTRACT_ENV</td>
</tr>
<tr>
+<td>EXTRACT_ENV</td>
<td>EXTRACT_ONLY</td>
-<td>EXTRACT_OPTS</td>
</tr>
<tr>
+<td>EXTRACT_OPTS</td>
<td>EXTRACT_SUFX</td>
-<td>EXTRACT_USING</td>
</tr>
<tr>
+<td>EXTRACT_USING</td>
<td>FAIL</td>
-<td>FAILOVER_FETCH</td>
</tr>
<tr>
+<td>FAILOVER_FETCH</td>
<td>FAIL_MSG</td>
-<td>FAKE_NCURSES</td>
</tr>
<tr>
+<td>FAKE_NCURSES</td>
<td>FAM</td>
-<td>FAM_ACCEPTED</td>
</tr>
<tr>
+<td>FAM_ACCEPTED</td>
<td>FAM_DEFAULT</td>
-<td>FAM_SERVER</td>
</tr>
<tr>
+<td>FAM_SERVER</td>
<td>FCPATH</td>
-<td>FEATURE_CPPFLAGS</td>
</tr>
<tr>
+<td>FEATURE_CPPFLAGS</td>
<td>FEATURE_LDFLAGS</td>
-<td>FEATURE_LIBS</td>
</tr>
<tr>
+<td>FEATURE_LIBS</td>
<td>FETCH_AFTER_ARGS</td>
-<td>FETCH_BEFORE_ARGS</td>
</tr>
<tr>
+<td>FETCH_BEFORE_ARGS</td>
<td>FETCH_CMD</td>
-<td>FETCH_OUTPUT_ARGS</td>
</tr>
<tr>
+<td>FETCH_OUTPUT_ARGS</td>
<td>FETCH_PROXY</td>
-<td>FETCH_RESUME_ARGS</td>
</tr>
<tr>
+<td>FETCH_RESUME_ARGS</td>
<td>FETCH_USING</td>
-<td>FILES_SUBST</td>
</tr>
<tr>
+<td>FILES_SUBST</td>
<td>FILES_SUBST_SED</td>
-<td>FIX_SYSTEM_HEADERS</td>
</tr>
<tr>
+<td>FIX_SYSTEM_HEADERS</td>
<td>FLUXBOX_USE_GNOME</td>
-<td>FLUXBOX_USE_KDE</td>
</tr>
<tr>
+<td>FLUXBOX_USE_KDE</td>
<td>FLUXBOX_USE_XFT</td>
-<td>FLUXBOX_USE_XINERAMA</td>
</tr>
<tr>
+<td>FLUXBOX_USE_XINERAMA</td>
<td>FONTDIR</td>
-<td>FONTS_DIRS</td>
</tr>
<tr>
+<td>FONTS_DIRS</td>
<td>FONTS_VERBOSE</td>
-<td>FOO_HACKS_MK</td>
</tr>
<tr>
+<td>FOO_HACKS_MK</td>
<td>FOSSIL_EXTRACTDIR</td>
-<td>FOSSIL_REPO</td>
</tr>
<tr>
+<td>FOSSIL_REPO</td>
<td>FOSSIL_REPOSITORIES</td>
-<td>FOSSIL_VERSION</td>
</tr>
<tr>
+<td>FOSSIL_VERSION</td>
<td>FOX_USE_XUNICODE</td>
-<td>FREEWNN_GROUP</td>
</tr>
<tr>
+<td>FREEWNN_GROUP</td>
<td>FREEWNN_USER</td>
-<td>FTP_PKG_URL_DIR</td>
</tr>
<tr>
+<td>FTP_PKG_URL_DIR</td>
<td>FTP_PKG_URL_HOST</td>
-<td>GAMEDATAMODE</td>
</tr>
<tr>
+<td>GAMEDATAMODE</td>
<td>GAMEDATA_PERMS</td>
-<td>GAMEDIRMODE</td>
</tr>
<tr>
+<td>GAMEDIRMODE</td>
<td>GAMEDIR_PERMS</td>
-<td>GAMEGRP</td>
</tr>
<tr>
+<td>GAMEGRP</td>
<td>GAMEMODE</td>
-<td>GAMEOWN</td>
</tr>
<tr>
+<td>GAMEOWN</td>
<td>GAMES_GROUP</td>
-<td>GAMES_USER</td>
</tr>
<tr>
+<td>GAMES_USER</td>
<td>GCC</td>
-<td>GCCBASE</td>
</tr>
<tr>
+<td>GCCBASE</td>
<td>GCC_REQD</td>
-<td>GCC_VERSION_SUFFIX</td>
</tr>
<tr>
+<td>GCC_VERSION_SUFFIX</td>
<td>GEM_BUILD</td>
-<td>GEM_CLEANBUILD</td>
</tr>
<tr>
+<td>GEM_CLEANBUILD</td>
<td>GEM_CLEANBUILD_EXTENSIONS</td>
-<td>GEM_DOCDIR</td>
</tr>
<tr>
+<td>GEM_DOCDIR</td>
<td>GEM_EXTSDIR</td>
-<td>GEM_HOME</td>
</tr>
<tr>
+<td>GEM_HOME</td>
<td>GEM_KEEPBUILD</td>
-<td>GEM_LIBDIR</td>
</tr>
<tr>
+<td>GEM_LIBDIR</td>
<td>GEM_NAME</td>
-<td>GEM_PATH</td>
</tr>
<tr>
+<td>GEM_PATH</td>
<td>GEM_SPECFILE</td>
-<td>GENERATE_PLIST</td>
</tr>
<tr>
+<td>GENERATE_PLIST</td>
<td>GHOSTSCRIPT_REQD</td>
-<td>GITHUB_PROJECT</td>
</tr>
<tr>
+<td>GITHUB_PROJECT</td>
<td>GITHUB_RELEASE</td>
-<td>GITHUB_TAG</td>
</tr>
<tr>
+<td>GITHUB_TAG</td>
<td>GITHUB_TYPE</td>
-<td>GITLAB_PROJECT</td>
</tr>
<tr>
+<td>GITLAB_PROJECT</td>
<td>GITLAB_TAG</td>
-<td>GITLAB_TYPE</td>
</tr>
<tr>
+<td>GITLAB_TYPE</td>
<td>GIT_BRANCH</td>
-<td>GIT_ENV</td>
</tr>
<tr>
+<td>GIT_ENV</td>
<td>GIT_EXTRACTDIR</td>
-<td>GIT_REPO</td>
</tr>
<tr>
+<td>GIT_REPO</td>
<td>GIT_REPOSITORIES</td>
-<td>GIT_REVISION</td>
</tr>
<tr>
+<td>GIT_REVISION</td>
<td>GIT_TAG</td>
-<td>GNU</td>
</tr>
<tr>
+<td>GNU</td>
<td>GNU_CONFIGURE</td>
-<td>GNU_CONFIGURE_INFODIR</td>
</tr>
<tr>
+<td>GNU_CONFIGURE_INFODIR</td>
<td>GNU_CONFIGURE_MANDIR</td>
-<td>GNU_CONFIGURE_QUIET</td>
</tr>
<tr>
+<td>GNU_CONFIGURE_QUIET</td>
<td>GNU_CONFIGURE_STRICT</td>
-<td>GODEP_REDIRECTS</td>
</tr>
<tr>
+<td>GODEP_REDIRECTS</td>
<td>GO_BUILD_PATTERN</td>
-<td>GO_DEPS</td>
</tr>
<tr>
+<td>GO_DEPS</td>
<td>GO_DIST_BASE</td>
-<td>GO_MODULE_FILES</td>
</tr>
<tr>
+<td>GO_MODULE_FILES</td>
<td>GO_SRCPATH</td>
-<td>GO_VERSION_DEFAULT</td>
</tr>
<tr>
+<td>GO_VERSION_DEFAULT</td>
<td>GROUP_SPECIFIC_PKGS</td>
-<td>GRUB_NETWORK_CARDS</td>
</tr>
<tr>
+<td>GRUB_NETWORK_CARDS</td>
<td>GRUB_PRESET_COMMAND</td>
-<td>GRUB_SCAN_ARGS</td>
</tr>
<tr>
+<td>GRUB_SCAN_ARGS</td>
<td>GZIP</td>
-<td>HASKELL_COMPILER</td>
</tr>
<tr>
+<td>HASKELL_COMPILER</td>
<td>HASKELL_ENABLE_HADDOCK_DOCUMENTATION</td>
-<td>HASKELL_ENABLE_LIBRARY_PROFILING</td>
</tr>
<tr>
+<td>HASKELL_ENABLE_LIBRARY_PROFILING</td>
<td>HASKELL_ENABLE_SHARED_LIBRARY</td>
-<td>HASKELL_OPTIMIZATION_LEVEL</td>
</tr>
<tr>
+<td>HASKELL_OPTIMIZATION_LEVEL</td>
<td>HAS_CONFIGURE</td>
-<td>HEADER_TEMPLATES</td>
</tr>
<tr>
+<td>HEADER_TEMPLATES</td>
<td>HG_REPO</td>
-<td>HG_REPOSITORIES</td>
</tr>
<tr>
+<td>HG_REPOSITORIES</td>
<td>HG_TAG</td>
-<td>HOST_PKGTOOLS_ARGS</td>
</tr>
<tr>
+<td>HOST_PKGTOOLS_ARGS</td>
<td>HOST_SPECIFIC_PKGS</td>
-<td>HOWL_GROUP</td>
</tr>
<tr>
+<td>HOWL_GROUP</td>
<td>HOWL_USER</td>
-<td>ICCBASE</td>
</tr>
<tr>
+<td>ICCBASE</td>
<td>ICECAST_CHROOTDIR</td>
-<td>ICON_THEMES</td>
</tr>
<tr>
+<td>ICON_THEMES</td>
<td>IDOBASE</td>
-<td>IGNORE_CCACHE</td>
</tr>
<tr>
+<td>IGNORE_CCACHE</td>
<td>IGNORE_INFO_DIRS</td>
-<td>IGNORE_INTERACTIVE_FETCH</td>
</tr>
<tr>
+<td>IGNORE_INTERACTIVE_FETCH</td>
<td>IMAKE</td>
-<td>IMAKEOPTS</td>
</tr>
<tr>
+<td>IMAKEOPTS</td>
<td>IMAKE_MAKE</td>
-<td>IMAKE_MANINSTALL</td>
</tr>
<tr>
+<td>IMAKE_MANINSTALL</td>
<td>IMAP_UW_CCLIENT_MBOX_FMT</td>
-<td>IMDICTDIR</td>
</tr>
<tr>
+<td>IMDICTDIR</td>
<td>INCOMPAT_CURSES</td>
-<td>INFO_DIR</td>
</tr>
<tr>
+<td>INFO_DIR</td>
<td>INFO_FILES</td>
-<td>INFO_FILES_VERBOSE</td>
</tr>
<tr>
+<td>INFO_FILES_VERBOSE</td>
<td>INFO_MSG</td>
-<td>INIT_SYSTEM</td>
</tr>
<tr>
+<td>INIT_SYSTEM</td>
<td>INN_DATA_DIR</td>
-<td>INN_GROUP</td>
</tr>
<tr>
+<td>INN_GROUP</td>
<td>INN_USER</td>
-<td>INSTALLATION_DIRS</td>
</tr>
<tr>
+<td>INSTALLATION_DIRS</td>
<td>INSTALLATION_DIRS_FROM_PLIST</td>
-<td>INSTALL_ENV</td>
</tr>
<tr>
+<td>INSTALL_ENV</td>
<td>INSTALL_SH_OVERRIDE</td>
-<td>INSTALL_SRC</td>
</tr>
<tr>
+<td>INSTALL_SRC</td>
<td>INSTALL_TEMPLATES</td>
-<td>INSTALL_UNSTRIPPED</td>
</tr>
<tr>
+<td>INSTALL_UNSTRIPPED</td>
<td>IRCD_HYBRID_IRC_GROUP</td>
-<td>IRCD_HYBRID_IRC_USER</td>
</tr>
<tr>
+<td>IRCD_HYBRID_IRC_USER</td>
<td>IRCD_HYBRID_MAXCONN</td>
-<td>IRCD_HYBRID_NICLEN</td>
</tr>
<tr>
+<td>IRCD_HYBRID_NICLEN</td>
<td>IRCD_HYBRID_SYSLOG_EVENTS</td>
-<td>IRCD_HYBRID_SYSLOG_FACILITY</td>
</tr>
<tr>
+<td>IRCD_HYBRID_SYSLOG_FACILITY</td>
<td>IRCD_HYBRID_TOPICLEN</td>
-<td>IRIX</td>
</tr>
<tr>
+<td>IRIX</td>
<td>IRRD_USE_PGP</td>
-<td>JABBERD_GROUP</td>
</tr>
<tr>
+<td>JABBERD_GROUP</td>
<td>JABBERD_LOGDIR</td>
-<td>JABBERD_PIDDIR</td>
</tr>
<tr>
+<td>JABBERD_PIDDIR</td>
<td>JABBERD_SPOOLDIR</td>
-<td>JABBERD_USER</td>
</tr>
<tr>
+<td>JABBERD_USER</td>
<td>JAKARTA_HOME</td>
-<td>JAVA_APP_PATH</td>
</tr>
<tr>
+<td>JAVA_APP_PATH</td>
<td>JAVA_APP_TARGETS</td>
-<td>JAVA_BINPREFIX</td>
</tr>
<tr>
+<td>JAVA_BINPREFIX</td>
<td>JAVA_CLASSPATH</td>
-<td>JAVA_HOME</td>
</tr>
<tr>
+<td>JAVA_HOME</td>
<td>JAVA_LD_LIBRARY_PATH</td>
-<td>JAVA_NAME</td>
</tr>
<tr>
+<td>JAVA_NAME</td>
<td>JAVA_UNLIMIT</td>
-<td>JAVA_WRAPPERS</td>
</tr>
<tr>
+<td>JAVA_WRAPPERS</td>
<td>JPEG_ACCEPTED</td>
-<td>JPEG_DEFAULT</td>
</tr>
<tr>
+<td>JPEG_DEFAULT</td>
<td>KERBEROS</td>
-<td>KERMIT_SUID_UUCP</td>
</tr>
<tr>
+<td>KERMIT_SUID_UUCP</td>
<td>KJS_USE_PCRE</td>
-<td>KNEWS_DOMAIN_FILE</td>
</tr>
<tr>
+<td>KNEWS_DOMAIN_FILE</td>
<td>KNEWS_DOMAIN_NAME</td>
-<td>KRB5_ACCEPTED</td>
</tr>
<tr>
+<td>KRB5_ACCEPTED</td>
<td>KRB5_DEFAULT</td>
-<td>LANGUAGES</td>
</tr>
<tr>
+<td>LANGUAGES</td>
<td>LAPACK_LIBS</td>
-<td>LATEX2HTML_ICONPATH</td>
</tr>
<tr>
+<td>LATEX2HTML_ICONPATH</td>
<td>LDCONFIG_ADD_CMD</td>
-<td>LDCONFIG_REMOVE_CMD</td>
</tr>
<tr>
+<td>LDCONFIG_REMOVE_CMD</td>
<td>LEAFNODE_DATA_DIR</td>
-<td>LEAFNODE_GROUP</td>
</tr>
<tr>
+<td>LEAFNODE_GROUP</td>
<td>LEAFNODE_USER</td>
-<td>LIBDVDCSS_HOMEPAGE</td>
</tr>
<tr>
+<td>LIBDVDCSS_HOMEPAGE</td>
<td>LIBDVDCSS_MASTER_SITES</td>
-<td>LIBRSVG_TYPE</td>
</tr>
<tr>
+<td>LIBRSVG_TYPE</td>
<td>LIBTOOL</td>
-<td>LIBTOOLIZE_PLIST</td>
</tr>
<tr>
+<td>LIBTOOLIZE_PLIST</td>
<td>LIBTOOL_M4_OVERRIDE</td>
-<td>LIBUSB_TYPE</td>
</tr>
<tr>
+<td>LIBUSB_TYPE</td>
<td>LICENSE</td>
-<td>LINKER_RPATH_FLAG</td>
</tr>
<tr>
+<td>LINKER_RPATH_FLAG</td>
<td>LINK_RPATH_FLAG</td>
-<td>LINUX_BASE_NODEPS</td>
</tr>
<tr>
+<td>LINUX_BASE_NODEPS</td>
<td>LINUX_BASE_PREFERRED</td>
-<td>LINUX_BASE_REQUIRED</td>
</tr>
<tr>
+<td>LINUX_BASE_REQUIRED</td>
<td>LINUX_LOCALES</td>
-<td>LOCALBASE</td>
</tr>
<tr>
+<td>LOCALBASE</td>
<td>LOCALBASE_LOCKTYPE</td>
-<td>LOCALPATCHES</td>
</tr>
<tr>
+<td>LOCALPATCHES</td>
<td>LOVE_DATA</td>
-<td>LOVE_GAME</td>
</tr>
<tr>
+<td>LOVE_GAME</td>
<td>LOVE_VERSION</td>
-<td>LP64PLATFORMS</td>
</tr>
<tr>
+<td>LP64PLATFORMS</td>
<td>MACHINE_PLATFORM</td>
-<td>MAILAGENT_DOMAIN</td>
</tr>
<tr>
+<td>MAILAGENT_DOMAIN</td>
<td>MAILAGENT_EMAIL</td>
-<td>MAILAGENT_FQDN</td>
</tr>
<tr>
+<td>MAILAGENT_FQDN</td>
<td>MAILAGENT_ORGANIZATION</td>
-<td>MAJORDOMO_HOMEDIR</td>
</tr>
<tr>
+<td>MAJORDOMO_HOMEDIR</td>
<td>MAJOR_OS_VERSION</td>
-<td>MAKEINFO_ARGS</td>
</tr>
<tr>
+<td>MAKEINFO_ARGS</td>
<td>MAKE_DIRS</td>
-<td>MAKE_DIRS_PERMS</td>
</tr>
<tr>
+<td>MAKE_DIRS_PERMS</td>
<td>MAKE_ENV</td>
-<td>MAKE_FILE</td>
</tr>
<tr>
+<td>MAKE_FILE</td>
<td>MAKE_FLAGS</td>
-<td>MAKE_JOBS</td>
</tr>
<tr>
+<td>MAKE_JOBS</td>
<td>MAKE_JOBS_SAFE</td>
-<td>MAKE_PROGRAM</td>
</tr>
<tr>
+<td>MAKE_PROGRAM</td>
<td>MANINSTALL</td>
-<td>MANZ</td>
</tr>
<tr>
+<td>MANZ</td>
<td>MASTER_SITES</td>
-<td>MASTER_SITE_BACKUP</td>
</tr>
<tr>
+<td>MASTER_SITE_BACKUP</td>
<td>MASTER_SITE_LOCAL</td>
-<td>MASTER_SITE_MOZILLA</td>
</tr>
<tr>
+<td>MASTER_SITE_MOZILLA</td>
<td>MASTER_SITE_OVERRIDE</td>
-<td>MASTER_SITE_PERL_CPAN</td>
</tr>
<tr>
+<td>MASTER_SITE_PERL_CPAN</td>
<td>MASTER_SORT</td>
-<td>MASTER_SORT_RANDOM</td>
</tr>
<tr>
+<td>MASTER_SORT_RANDOM</td>
<td>MASTER_SORT_REGEX</td>
-<td>MECAB_CHARSET</td>
</tr>
<tr>
+<td>MECAB_CHARSET</td>
<td>MEDIATOMB_GROUP</td>
-<td>MEDIATOMB_USER</td>
</tr>
<tr>
+<td>MEDIATOMB_USER</td>
<td>MIPSPROBASE</td>
-<td>MIREDO_GROUP</td>
</tr>
<tr>
+<td>MIREDO_GROUP</td>
<td>MIREDO_USER</td>
-<td>MISSING_FEATURES</td>
</tr>
<tr>
+<td>MISSING_FEATURES</td>
<td>MKDIR</td>
-<td>MLDONKEY_GROUP</td>
</tr>
<tr>
+<td>MLDONKEY_GROUP</td>
<td>MLDONKEY_HOME</td>
-<td>MLDONKEY_USER</td>
</tr>
<tr>
+<td>MLDONKEY_USER</td>
<td>MONOTONE_GROUP</td>
-<td>MONOTONE_USER</td>
</tr>
<tr>
+<td>MONOTONE_USER</td>
<td>MOTIFBASE</td>
-<td>MOTIF_TYPE</td>
</tr>
<tr>
+<td>MOTIF_TYPE</td>
<td>MOTIF_TYPE_DEFAULT</td>
-<td>MPI_TYPE</td>
</tr>
<tr>
+<td>MPI_TYPE</td>
<td>MSGFMT_STRIP_MSGCTXT</td>
-<td>MSGFMT_STRIP_MSGID_PLURAL</td>
</tr>
<tr>
+<td>MSGFMT_STRIP_MSGID_PLURAL</td>
<td>MTOOLS_ENABLE_FLOPPYD</td>
-<td>MUST</td>
</tr>
<tr>
+<td>MUST</td>
<td>MV</td>
-<td>MYSQL_CHARSET</td>
</tr>
<tr>
+<td>MYSQL_CHARSET</td>
<td>MYSQL_DATADIR</td>
-<td>MYSQL_EXTRA_CHARSET</td>
</tr>
<tr>
+<td>MYSQL_EXTRA_CHARSET</td>
<td>MYSQL_GROUP</td>
-<td>MYSQL_PKGSRCDIR</td>
</tr>
<tr>
+<td>MYSQL_PKGSRCDIR</td>
<td>MYSQL_USER</td>
-<td>MYSQL_VERSIONS_ACCEPTED</td>
</tr>
<tr>
+<td>MYSQL_VERSIONS_ACCEPTED</td>
<td>MYSQL_VERSION_DEFAULT</td>
-<td>NAGIOSCMD_GROUP</td>
</tr>
<tr>
+<td>NAGIOSCMD_GROUP</td>
<td>NAGIOSDIR</td>
-<td>NAGIOS_GROUP</td>
</tr>
<tr>
+<td>NAGIOS_GROUP</td>
<td>NAGIOS_USER</td>
-<td>NATIVE_APPEND_ABI</td>
</tr>
<tr>
+<td>NATIVE_APPEND_ABI</td>
<td>NATIVE_APPEND_ELF</td>
-<td>NATIVE_EXEC_FMT</td>
</tr>
<tr>
+<td>NATIVE_EXEC_FMT</td>
<td>NATIVE_MACHINE_PLATFORM</td>
-<td>NATIVE_OBJECT_FMT</td>
</tr>
<tr>
+<td>NATIVE_OBJECT_FMT</td>
<td>NBPAX_PROGRAM_PREFIX</td>
-<td>NETBSD_LOGIN_NAME</td>
</tr>
<tr>
+<td>NETBSD_LOGIN_NAME</td>
<td>NMH_EDITOR</td>
-<td>NMH_MTA</td>
</tr>
<tr>
+<td>NMH_MTA</td>
<td>NMH_PAGER</td>
-<td>NOLOGIN</td>
</tr>
<tr>
+<td>NOLOGIN</td>
<td>NOTE</td>
-<td>NOT_FOR_PLATFORM</td>
</tr>
<tr>
+<td>NOT_FOR_PLATFORM</td>
<td>NOT_PAX_ASLR_SAFE</td>
-<td>NOT_PAX_MPROTECT_SAFE</td>
</tr>
<tr>
+<td>NOT_PAX_MPROTECT_SAFE</td>
<td>NO_BUILD</td>
-<td>NO_CHECKSUM</td>
</tr>
<tr>
+<td>NO_CHECKSUM</td>
<td>NO_CONFIGURE</td>
-<td>NO_SKIP</td>
</tr>
<tr>
+<td>NO_SKIP</td>
<td>NS_PREFERRED</td>
-<td>NULLMAILER_GROUP</td>
</tr>
<tr>
+<td>NULLMAILER_GROUP</td>
<td>NULLMAILER_USER</td>
-<td>OASIS</td>
</tr>
<tr>
+<td>OASIS</td>
<td>OASIS_BUILD_ARGS</td>
-<td>OBJHOSTNAME</td>
</tr>
<tr>
+<td>OBJHOSTNAME</td>
<td>OBJMACHINE</td>
-<td>OCAML_FINDLIB_DIRS</td>
</tr>
<tr>
+<td>OCAML_FINDLIB_DIRS</td>
<td>OCAML_FINDLIB_REGISTER</td>
-<td>OCAML_FINDLIB_REGISTER_VERBOSE</td>
</tr>
<tr>
+<td>OCAML_FINDLIB_REGISTER_VERBOSE</td>
<td>OCAML_SITELIBDIR</td>
-<td>OCAML_TOPKG_DOCDIR</td>
</tr>
<tr>
+<td>OCAML_TOPKG_DOCDIR</td>
<td>OCAML_USE_DUNE</td>
-<td>OCAML_USE_FINDLIB</td>
</tr>
<tr>
+<td>OCAML_USE_FINDLIB</td>
<td>OCAML_USE_JBUILDER</td>
-<td>OCAML_USE_OASIS</td>
</tr>
<tr>
+<td>OCAML_USE_OASIS</td>
<td>OCAML_USE_OASIS_DYNRUN</td>
-<td>OCAML_USE_OPAM</td>
</tr>
<tr>
+<td>OCAML_USE_OPAM</td>
<td>OCAML_USE_OPT_COMPILER</td>
-<td>OCAML_USE_TOPKG</td>
</tr>
<tr>
+<td>OCAML_USE_TOPKG</td>
<td>OMF</td>
-<td>ONLY_FOR_COMPILER</td>
</tr>
<tr>
+<td>ONLY_FOR_COMPILER</td>
<td>ONLY_FOR_PLATFORM</td>
-<td>OPENSSH_CHROOT</td>
</tr>
<tr>
+<td>OPENSSH_CHROOT</td>
<td>OPENSSH_GROUP</td>
-<td>OPENSSH_USER</td>
</tr>
<tr>
+<td>OPENSSH_USER</td>
<td>OPSYS</td>
-<td>OPSYS_EMULDIR</td>
</tr>
<tr>
+<td>OPSYS_EMULDIR</td>
<td>OSS_TYPE</td>
-<td>OSX</td>
</tr>
<tr>
+<td>OSX</td>
<td>OSX_TOLERATE_SDK_SKEW</td>
-<td>OS_HAVE_ALSA</td>
</tr>
<tr>
+<td>OS_HAVE_ALSA</td>
<td>OS_HAVE_RCD</td>
-<td>OS_VARIANT</td>
</tr>
<tr>
+<td>OS_VARIANT</td>
<td>OS_VERSION</td>
-<td>OTF_FONTS_DIR</td>
</tr>
<tr>
+<td>OTF_FONTS_DIR</td>
<td>OVERRIDE_DIRDEPTH</td>
-<td>OVERRIDE_GEMSPEC</td>
</tr>
<tr>
+<td>OVERRIDE_GEMSPEC</td>
<td>OVERRIDE_GNU_CONFIG_SCRIPTS</td>
-<td>OVERRIDE_ROCKSPEC</td>
</tr>
<tr>
+<td>OVERRIDE_ROCKSPEC</td>
<td>OWN_DIRS</td>
-<td>OWN_DIRS_PERMS</td>
</tr>
<tr>
+<td>OWN_DIRS_PERMS</td>
<td>P4GROUP</td>
-<td>P4PORT</td>
</tr>
<tr>
+<td>P4PORT</td>
<td>P4ROOT</td>
-<td>P4USER</td>
</tr>
<tr>
+<td>P4USER</td>
<td>PACKAGES</td>
-<td>PALMOS_DEFAULT_SDK</td>
</tr>
<tr>
+<td>PALMOS_DEFAULT_SDK</td>
<td>PAMBASE</td>
-<td>PAM_DEFAULT</td>
</tr>
<tr>
+<td>PAM_DEFAULT</td>
<td>PAPERSIZE</td>
-<td>PASSIVE_FETCH</td>
</tr>
<tr>
+<td>PASSIVE_FETCH</td>
<td>PATCHDIR</td>
-<td>PATCHFILES</td>
</tr>
<tr>
+<td>PATCHFILES</td>
<td>PATCH_ARGS</td>
-<td>PATCH_DEBUG</td>
</tr>
<tr>
+<td>PATCH_DEBUG</td>
<td>PATCH_DIST_ARGS</td>
-<td>PATCH_DIST_CAT</td>
</tr>
<tr>
+<td>PATCH_DIST_CAT</td>
<td>PATCH_DIST_STRIP</td>
-<td>PATCH_FUZZ_FACTOR</td>
</tr>
<tr>
+<td>PATCH_FUZZ_FACTOR</td>
<td>PATCH_STRIP</td>
-<td>PATH</td>
</tr>
<tr>
+<td>PATH</td>
<td>PCCBASE</td>
-<td>PEAR</td>
</tr>
<tr>
+<td>PEAR</td>
<td>PEAR_CHANNEL</td>
-<td>PEAR_CHANNEL_ALIAS</td>
</tr>
<tr>
+<td>PEAR_CHANNEL_ALIAS</td>
<td>PEAR_CHANNEL_VERSION</td>
-<td>PEAR_CMD</td>
</tr>
<tr>
+<td>PEAR_CMD</td>
<td>PEAR_LIB</td>
-<td>PEAR_PACKAGE_XML</td>
</tr>
<tr>
+<td>PEAR_PACKAGE_XML</td>
<td>PERL5</td>
-<td>PERL5_CONFIGURE</td>
</tr>
<tr>
+<td>PERL5_CONFIGURE</td>
<td>PERL5_CONFIGURE_DIRS</td>
-<td>PERL5_LDFLAGS</td>
</tr>
<tr>
+<td>PERL5_LDFLAGS</td>
<td>PERL5_LICENSE</td>
-<td>PERL5_MODULE_TYPE</td>
</tr>
<tr>
+<td>PERL5_MODULE_TYPE</td>
<td>PERL5_PACKLIST</td>
-<td>PERL5_PACKLIST_DIR</td>
</tr>
<tr>
+<td>PERL5_PACKLIST_DIR</td>
<td>PERL5_PERLBASE</td>
-<td>PERL5_SITEBASE</td>
</tr>
<tr>
+<td>PERL5_SITEBASE</td>
<td>PERL5_USE_PACKLIST</td>
-<td>PERL5_VENDORBASE</td>
</tr>
<tr>
+<td>PERL5_VENDORBASE</td>
<td>PFCTL</td>
-<td>PFVAR_H</td>
</tr>
<tr>
+<td>PFVAR_H</td>
<td>PF_VERSION</td>
-<td>PGGROUP</td>
</tr>
<tr>
+<td>PGGROUP</td>
<td>PGHOME</td>
-<td>PGPKGSRCDIR</td>
</tr>
<tr>
+<td>PGPKGSRCDIR</td>
<td>PGSQL_TYPE</td>
-<td>PGSQL_VERSIONS_ACCEPTED</td>
</tr>
<tr>
+<td>PGSQL_VERSIONS_ACCEPTED</td>
<td>PGSQL_VERSION_DEFAULT</td>
-<td>PGUSER</td>
</tr>
<tr>
+<td>PGUSER</td>
<td>PG_LIB_EXT</td>
-<td>PHP</td>
</tr>
<tr>
+<td>PHP</td>
<td>PHPCOMMON_MK</td>
-<td>PHPPKGSRCDIR</td>
</tr>
<tr>
+<td>PHPPKGSRCDIR</td>
<td>PHP_BASE_VERS</td>
-<td>PHP_CHECK_INSTALLED</td>
</tr>
<tr>
+<td>PHP_CHECK_INSTALLED</td>
<td>PHP_EXTENSION_DIR</td>
-<td>PHP_INITIAL_TEENY</td>
</tr>
<tr>
+<td>PHP_INITIAL_TEENY</td>
<td>PHP_PKG_PREFIX</td>
-<td>PHP_VERSION</td>
</tr>
<tr>
+<td>PHP_VERSION</td>
<td>PHP_VERSIONS_ACCEPTED</td>
-<td>PHP_VERSIONS_INCOMPATIBLE</td>
</tr>
<tr>
+<td>PHP_VERSIONS_INCOMPATIBLE</td>
<td>PHP_VERSION_DEFAULT</td>
-<td>PHP_VERSION_REQD</td>
</tr>
<tr>
+<td>PHP_VERSION_REQD</td>
<td>PILRC_USE_GTK</td>
-<td>PKGCONFIG_BASE</td>
</tr>
<tr>
+<td>PKGCONFIG_BASE</td>
<td>PKGCONFIG_FILE</td>
-<td>PKGCONFIG_OVERRIDE</td>
</tr>
<tr>
+<td>PKGCONFIG_OVERRIDE</td>
<td>PKGCONFIG_OVERRIDE_STAGE</td>
-<td>PKGDIR</td>
</tr>
<tr>
+<td>PKGDIR</td>
<td>PKGGNUDIR</td>
-<td>PKGINFODIR</td>
</tr>
<tr>
+<td>PKGINFODIR</td>
<td>PKGLOCALEDIR</td>
-<td>PKGMANDIR</td>
</tr>
<tr>
+<td>PKGMANDIR</td>
<td>PKGNAME</td>
-<td>PKGNAME_REQD</td>
</tr>
<tr>
+<td>PKGNAME_REQD</td>
<td>PKGPATH</td>
-<td>PKGREVISION</td>
</tr>
<tr>
+<td>PKGREVISION</td>
<td>PKGSRC_BLAS_TYPES</td>
-<td>PKGSRC_CHANGES</td>
</tr>
<tr>
+<td>PKGSRC_CHANGES</td>
<td>PKGSRC_COMPILER</td>
-<td>PKGSRC_KEEP_BIN_PKGS</td>
</tr>
<tr>
+<td>PKGSRC_KEEP_BIN_PKGS</td>
<td>PKGSRC_LOCKTYPE</td>
-<td>PKGSRC_MAKE_ENV</td>
</tr>
<tr>
+<td>PKGSRC_MAKE_ENV</td>
<td>PKGSRC_MESSAGE_RECIPIENTS</td>
-<td>PKGSRC_MKPIE</td>
</tr>
<tr>
+<td>PKGSRC_MKPIE</td>
<td>PKGSRC_MKREPRO</td>
-<td>PKGSRC_RUN_TEST</td>
</tr>
<tr>
+<td>PKGSRC_RUN_TEST</td>
<td>PKGSRC_SETENV</td>
-<td>PKGSRC_SLEEPSECS</td>
</tr>
<tr>
+<td>PKGSRC_SLEEPSECS</td>
<td>PKGSRC_TODO</td>
-<td>PKGSRC_USE_CTF</td>
</tr>
<tr>
+<td>PKGSRC_USE_CTF</td>
<td>PKGSRC_USE_FORTIFY</td>
-<td>PKGSRC_USE_RELRO</td>
</tr>
<tr>
+<td>PKGSRC_USE_RELRO</td>
<td>PKGSRC_USE_SSP</td>
-<td>PKGSRC_USE_STACK_CHECK</td>
</tr>
<tr>
+<td>PKGSRC_USE_STACK_CHECK</td>
<td>PKGTASKS_DATAFILE</td>
-<td>PKGTOOLS_ARGS</td>
</tr>
<tr>
+<td>PKGTOOLS_ARGS</td>
<td>PKGTOOLS_ENV</td>
-<td>PKG_ALTERNATIVES</td>
</tr>
<tr>
+<td>PKG_ALTERNATIVES</td>
<td>PKG_APACHE</td>
-<td>PKG_APACHE_ACCEPTED</td>
</tr>
<tr>
+<td>PKG_APACHE_ACCEPTED</td>
<td>PKG_APACHE_DEFAULT</td>
-<td>PKG_BEST_EXISTS</td>
</tr>
<tr>
+<td>PKG_BEST_EXISTS</td>
<td>PKG_BUILD_OPTIONS</td>
-<td>PKG_COMPRESSION</td>
</tr>
<tr>
+<td>PKG_COMPRESSION</td>
<td>PKG_CONFIG</td>
-<td>PKG_CONFIG_PERMS</td>
</tr>
<tr>
+<td>PKG_CONFIG_PERMS</td>
<td>PKG_CREATE_USERGROUP</td>
-<td>PKG_DB_TMPDIR</td>
</tr>
<tr>
+<td>PKG_DB_TMPDIR</td>
<td>PKG_DEBUG_LEVEL</td>
-<td>PKG_DEFAULT_OPTIONS</td>
</tr>
<tr>
+<td>PKG_DEFAULT_OPTIONS</td>
<td>PKG_DESTDIR_SUPPORT</td>
-<td>PKG_DEVELOPER</td>
</tr>
<tr>
+<td>PKG_DEVELOPER</td>
<td>PKG_DISABLED_OPTIONS</td>
-<td>PKG_FATAL_ERRORS</td>
</tr>
<tr>
+<td>PKG_FATAL_ERRORS</td>
<td>PKG_FC</td>
-<td>PKG_FILELIST_CMD</td>
</tr>
<tr>
+<td>PKG_FILELIST_CMD</td>
<td>PKG_GECOS</td>
-<td>PKG_GID</td>
</tr>
<tr>
+<td>PKG_GID</td>
<td>PKG_GROUPS</td>
-<td>PKG_GROUPS_VARS</td>
</tr>
<tr>
+<td>PKG_GROUPS_VARS</td>
<td>PKG_HOME</td>
-<td>PKG_INIT_SCRIPTS</td>
</tr>
<tr>
+<td>PKG_INIT_SCRIPTS</td>
<td>PKG_JAVA_HOME</td>
-<td>PKG_JVM</td>
</tr>
<tr>
+<td>PKG_JVM</td>
<td>PKG_JVMS_ACCEPTED</td>
-<td>PKG_JVM_DEFAULT</td>
</tr>
<tr>
+<td>PKG_JVM_DEFAULT</td>
<td>PKG_LEGACY_OPTIONS</td>
-<td>PKG_LIBTOOL</td>
</tr>
<tr>
+<td>PKG_LIBTOOL</td>
<td>PKG_OPTIONS</td>
-<td>PKG_OPTIONS_DEPRECATED_WARNINGS</td>
</tr>
<tr>
+<td>PKG_OPTIONS_DEPRECATED_WARNINGS</td>
<td>PKG_OPTIONS_LEGACY_OPTS</td>
-<td>PKG_OPTIONS_LEGACY_VARS</td>
</tr>
<tr>
+<td>PKG_OPTIONS_LEGACY_VARS</td>
<td>PKG_OPTIONS_NONEMPTY_SETS</td>
-<td>PKG_OPTIONS_OPTIONAL_GROUPS</td>
</tr>
<tr>
+<td>PKG_OPTIONS_OPTIONAL_GROUPS</td>
<td>PKG_OPTIONS_REQUIRED_GROUPS</td>
-<td>PKG_OPTIONS_VAR</td>
</tr>
<tr>
+<td>PKG_OPTIONS_VAR</td>
<td>PKG_PHP</td>
-<td>PKG_PHP_MAJOR_VERS</td>
</tr>
<tr>
+<td>PKG_PHP_MAJOR_VERS</td>
<td>PKG_PHP_VERSION</td>
-<td>PKG_RCD_SCRIPTS</td>
</tr>
<tr>
+<td>PKG_RCD_SCRIPTS</td>
<td>PKG_REFCOUNT_DBDIR</td>
-<td>PKG_REGISTER_SHELLS</td>
</tr>
<tr>
+<td>PKG_REGISTER_SHELLS</td>
<td>PKG_RESUME_TRANSFERS</td>
-<td>PKG_SHELL</td>
</tr>
<tr>
+<td>PKG_SHELL</td>
<td>PKG_SUGGESTED_OPTIONS</td>
-<td>PKG_SUPPORTED_OPTIONS</td>
</tr>
<tr>
+<td>PKG_SUPPORTED_OPTIONS</td>
<td>PKG_SYSCONFBASE</td>
-<td>PKG_SYSCONFBASEDIR</td>
</tr>
<tr>
+<td>PKG_SYSCONFBASEDIR</td>
<td>PKG_SYSCONFDIR</td>
-<td>PKG_SYSCONFDIR_PERMS</td>
</tr>
<tr>
+<td>PKG_SYSCONFDIR_PERMS</td>
<td>PKG_SYSCONFSUBDIR</td>
-<td>PKG_SYSCONFVAR</td>
</tr>
<tr>
+<td>PKG_SYSCONFVAR</td>
<td>PKG_TOOLS_BIN</td>
-<td>PKG_UID</td>
</tr>
<tr>
+<td>PKG_UID</td>
<td>PKG_UPDATE_FONTS_DB</td>
-<td>PKG_USERS</td>
</tr>
<tr>
+<td>PKG_USERS</td>
<td>PKG_USERS_VARS</td>
-<td>PKG_VERBOSE</td>
</tr>
<tr>
+<td>PKG_VERBOSE</td>
<td>PLIST</td>
-<td>PLIST_AWK</td>
</tr>
<tr>
+<td>PLIST_AWK</td>
<td>PLIST_AWK_ENV</td>
-<td>PLIST_SRC</td>
</tr>
<tr>
+<td>PLIST_SRC</td>
<td>PLIST_SUBST</td>
-<td>PLIST_TYPE</td>
</tr>
<tr>
+<td>PLIST_TYPE</td>
<td>PLIST_VARS</td>
-<td>POPTOP_USE_MPPE</td>
</tr>
<tr>
+<td>POPTOP_USE_MPPE</td>
<td>POSSIBLE_GFORTRAN_VERSION</td>
-<td>POST_FETCH_HOOK</td>
</tr>
<tr>
+<td>POST_FETCH_HOOK</td>
<td>PREFER</td>
-<td>PREFER_NATIVE</td>
</tr>
<tr>
+<td>PREFER_NATIVE</td>
<td>PREFER_NATIVE_PTHREADS</td>
-<td>PREFER_PKGSRC</td>
</tr>
<tr>
+<td>PREFER_PKGSRC</td>
<td>PREFIX</td>
-<td>PREPEND_PATH</td>
</tr>
<tr>
+<td>PREPEND_PATH</td>
<td>PRE_ROOT_CMD</td>
-<td>PRIVILEGED_STAGES</td>
</tr>
<tr>
+<td>PRIVILEGED_STAGES</td>
<td>PS</td>
-<td>PTHREAD_AUTO_VARS</td>
</tr>
<tr>
+<td>PTHREAD_AUTO_VARS</td>
<td>PTHREAD_CFLAGS</td>
-<td>PTHREAD_LDFLAGS</td>
</tr>
<tr>
+<td>PTHREAD_LDFLAGS</td>
<td>PTHREAD_LIBS</td>
-<td>PTHREAD_OPTS</td>
</tr>
<tr>
+<td>PTHREAD_OPTS</td>
<td>PTHREAD_TYPE</td>
-<td>PVM_SSH</td>
</tr>
<tr>
+<td>PVM_SSH</td>
<td>PYPKGPREFIX</td>
-<td>PYTHON_FOR_BUILD_ONLY</td>
</tr>
<tr>
+<td>PYTHON_FOR_BUILD_ONLY</td>
<td>PYTHON_SELF_CONFLICT</td>
-<td>PYTHON_VERSIONED_DEPENDENCIES</td>
</tr>
<tr>
+<td>PYTHON_VERSIONED_DEPENDENCIES</td>
<td>PYTHON_VERSIONS_ACCEPTED</td>
-<td>PYTHON_VERSIONS_INCOMPATIBLE</td>
</tr>
<tr>
+<td>PYTHON_VERSIONS_INCOMPATIBLE</td>
<td>PYTHON_VERSION_DEFAULT</td>
-<td>PYTHON_VERSION_REQD</td>
</tr>
<tr>
+<td>PYTHON_VERSION_REQD</td>
<td>PYVERSSUFFIX</td>
-<td>PY_NO_EGG</td>
</tr>
<tr>
+<td>PY_NO_EGG</td>
<td>QMAILDIR</td>
-<td>QMAIL_ALIAS_USER</td>
</tr>
<tr>
+<td>QMAIL_ALIAS_USER</td>
<td>QMAIL_DAEMON_USER</td>
-<td>QMAIL_LOG_USER</td>
</tr>
<tr>
+<td>QMAIL_LOG_USER</td>
<td>QMAIL_NOFILES_GROUP</td>
-<td>QMAIL_PASSWD_USER</td>
</tr>
<tr>
+<td>QMAIL_PASSWD_USER</td>
<td>QMAIL_QMAIL_GROUP</td>
-<td>QMAIL_QUEUE_DIR</td>
</tr>
<tr>
+<td>QMAIL_QUEUE_DIR</td>
<td>QMAIL_QUEUE_EXTRA</td>
-<td>QMAIL_QUEUE_USER</td>
</tr>
<tr>
+<td>QMAIL_QUEUE_USER</td>
<td>QMAIL_REMOTE_USER</td>
-<td>QMAIL_ROOT_USER</td>
</tr>
<tr>
+<td>QMAIL_ROOT_USER</td>
<td>QMAIL_SEND_USER</td>
-<td>QPOPPER_FAC</td>
</tr>
<tr>
+<td>QPOPPER_FAC</td>
<td>QPOPPER_SPOOL_DIR</td>
-<td>QPOPPER_USER</td>
</tr>
<tr>
+<td>QPOPPER_USER</td>
<td>RAKE_NAME</td>
-<td>RASMOL_DEPTH</td>
</tr>
<tr>
+<td>RASMOL_DEPTH</td>
<td>RCD_DIR</td>
-<td>RCD_ORDER</td>
</tr>
<tr>
+<td>RCD_ORDER</td>
<td>RCD_SCRIPTS</td>
-<td>RCD_SCRIPTS_DIR</td>
</tr>
<tr>
+<td>RCD_SCRIPTS_DIR</td>
<td>RCD_SCRIPTS_EXAMPLEDIR</td>
-<td>RCD_SCRIPTS_MODE</td>
</tr>
<tr>
+<td>RCD_SCRIPTS_MODE</td>
<td>RCD_SCRIPTS_SHELL</td>
-<td>RCD_SCRIPT_SRC</td>
</tr>
<tr>
+<td>RCD_SCRIPT_SRC</td>
<td>RCD_SUBR</td>
-<td>RDOC</td>
</tr>
<tr>
+<td>RDOC</td>
<td>READLINE_DEFAULT</td>
-<td>READLINE_TYPE</td>
</tr>
<tr>
+<td>READLINE_TYPE</td>
<td>REAL_ROOT_GROUP</td>
-<td>REAL_ROOT_USER</td>
</tr>
<tr>
+<td>REAL_ROOT_USER</td>
<td>RECURSIVE_MAKE</td>
-<td>RELAY_CTRL_DIR</td>
</tr>
<tr>
+<td>RELAY_CTRL_DIR</td>
<td>REPLACE_AWK</td>
-<td>REPLACE_BASH</td>
</tr>
<tr>
+<td>REPLACE_BASH</td>
<td>REPLACE_CSH</td>
-<td>REPLACE_KSH</td>
</tr>
<tr>
+<td>REPLACE_KSH</td>
<td>REPLACE_PERL</td>
-<td>REPLACE_PERL6</td>
</tr>
<tr>
+<td>REPLACE_PERL6</td>
<td>REPLACE_PHP</td>
-<td>REPLACE_PYTHON</td>
</tr>
<tr>
+<td>REPLACE_PYTHON</td>
<td>REPLACE_RUBY</td>
-<td>REPLACE_RUBY_DIRS</td>
</tr>
<tr>
+<td>REPLACE_RUBY_DIRS</td>
<td>REPLACE_RUBY_PAT</td>
-<td>REPLACE_SH</td>
</tr>
<tr>
+<td>REPLACE_SH</td>
<td>REPLACE_TEXLUA</td>
-<td>REQD_DIRS</td>
</tr>
<tr>
+<td>REQD_DIRS</td>
<td>REQD_DIRS_PERMS</td>
-<td>REQD_FILES</td>
</tr>
<tr>
+<td>REQD_FILES</td>
<td>REQD_FILES_MODE</td>
-<td>REQD_FILES_PERMS</td>
</tr>
<tr>
+<td>REQD_FILES_PERMS</td>
<td>RESOLV_AUTO_VARS</td>
-<td>RESOLV_LDFLAGS</td>
</tr>
<tr>
+<td>RESOLV_LDFLAGS</td>
<td>RESOLV_LIBS</td>
-<td>RM</td>
</tr>
<tr>
+<td>RM</td>
<td>ROCKSPEC_NAME</td>
-<td>ROCKSPEC_SPECFILE</td>
</tr>
<tr>
+<td>ROCKSPEC_SPECFILE</td>
<td>ROOT_CMD</td>
-<td>ROOT_GROUP</td>
</tr>
<tr>
+<td>ROOT_GROUP</td>
<td>ROOT_USER</td>
-<td>RPCGEN</td>
</tr>
<tr>
+<td>RPCGEN</td>
<td>RPM</td>
-<td>RPM2PKG_PLIST</td>
</tr>
<tr>
+<td>RPM2PKG_PLIST</td>
<td>RPM2PKG_PREFIX</td>
-<td>RPM2PKG_STAGE</td>
</tr>
<tr>
+<td>RPM2PKG_STAGE</td>
<td>RPM2PKG_STRIP</td>
-<td>RPM2PKG_SUBPREFIX</td>
</tr>
<tr>
+<td>RPM2PKG_SUBPREFIX</td>
<td>RPMFILES</td>
-<td>RPMIGNOREPATH</td>
</tr>
<tr>
+<td>RPMIGNOREPATH</td>
<td>RPM_DB_PREFIX</td>
-<td>RSSH_CVS_PATH</td>
</tr>
<tr>
+<td>RSSH_CVS_PATH</td>
<td>RSSH_RDIST_PATH</td>
-<td>RSSH_RSYNC_PATH</td>
</tr>
<tr>
+<td>RSSH_RSYNC_PATH</td>
<td>RSSH_SCP_PATH</td>
-<td>RSSH_SFTP_SERVER_PATH</td>
</tr>
<tr>
+<td>RSSH_SFTP_SERVER_PATH</td>
<td>RUBY</td>
-<td>RUBYGEM</td>
</tr>
<tr>
+<td>RUBYGEM</td>
<td>RUBYGEM_NAME</td>
-<td>RUBYGEM_OPTIONS</td>
</tr>
<tr>
+<td>RUBYGEM_OPTIONS</td>
<td>RUBY_ABI_VERSION</td>
-<td>RUBY_ARCH</td>
</tr>
<tr>
+<td>RUBY_ARCH</td>
<td>RUBY_ARCHINC</td>
-<td>RUBY_ARCHLIB</td>
</tr>
<tr>
+<td>RUBY_ARCHLIB</td>
<td>RUBY_BASE</td>
-<td>RUBY_BASERIDIR</td>
</tr>
<tr>
+<td>RUBY_BASERIDIR</td>
<td>RUBY_BUILD_DOCUMENT</td>
-<td>RUBY_DLEXT</td>
</tr>
<tr>
+<td>RUBY_DLEXT</td>
<td>RUBY_DOC</td>
-<td>RUBY_DYNAMIC_DIRS</td>
</tr>
<tr>
+<td>RUBY_DYNAMIC_DIRS</td>
<td>RUBY_EG</td>
-<td>RUBY_ENCODING_ARG</td>
</tr>
<tr>
+<td>RUBY_ENCODING_ARG</td>
<td>RUBY_EXTCONF</td>
-<td>RUBY_EXTCONF_CHECK</td>
</tr>
<tr>
+<td>RUBY_EXTCONF_CHECK</td>
<td>RUBY_EXTCONF_DEBUG</td>
-<td>RUBY_EXTCONF_MAKEFILE</td>
</tr>
<tr>
+<td>RUBY_EXTCONF_MAKEFILE</td>
<td>RUBY_GEM_BASE</td>
-<td>RUBY_INC</td>
</tr>
<tr>
+<td>RUBY_INC</td>
<td>RUBY_LIB</td>
-<td>RUBY_LIB_BASE</td>
</tr>
<tr>
+<td>RUBY_LIB_BASE</td>
<td>RUBY_NAME</td>
-<td>RUBY_NOVERSION</td>
</tr>
<tr>
+<td>RUBY_NOVERSION</td>
<td>RUBY_PKGPREFIX</td>
-<td>RUBY_RAILS</td>
</tr>
<tr>
+<td>RUBY_RAILS</td>
<td>RUBY_RAILS51_VERSION</td>
-<td>RUBY_RAILS52_VERSION</td>
</tr>
<tr>
+<td>RUBY_RAILS52_VERSION</td>
<td>RUBY_RAILS60_VERSION</td>
-<td>RUBY_RAILS_ACCEPTED</td>
</tr>
<tr>
+<td>RUBY_RAILS_ACCEPTED</td>
<td>RUBY_RAILS_DEFAULT</td>
-<td>RUBY_RAILS_REQD</td>
</tr>
<tr>
+<td>RUBY_RAILS_REQD</td>
<td>RUBY_RAILS_STRICT_DEP</td>
-<td>RUBY_RIDIR</td>
</tr>
<tr>
+<td>RUBY_RIDIR</td>
<td>RUBY_SETUP</td>
-<td>RUBY_SHLIB</td>
</tr>
<tr>
+<td>RUBY_SHLIB</td>
<td>RUBY_SHLIBALIAS</td>
-<td>RUBY_SHLIBVER</td>
</tr>
<tr>
+<td>RUBY_SHLIBVER</td>
<td>RUBY_SIMPLE_INSTALL</td>
-<td>RUBY_SITEARCHLIB</td>
</tr>
<tr>
+<td>RUBY_SITEARCHLIB</td>
<td>RUBY_SITELIB</td>
-<td>RUBY_SITELIB_BASE</td>
</tr>
<tr>
+<td>RUBY_SITELIB_BASE</td>
<td>RUBY_SITERIDIR</td>
-<td>RUBY_SLEXT</td>
</tr>
<tr>
+<td>RUBY_SLEXT</td>
<td>RUBY_SRCDIR</td>
-<td>RUBY_STATICLIB</td>
</tr>
<tr>
+<td>RUBY_STATICLIB</td>
<td>RUBY_SUFFIX</td>
-<td>RUBY_SYSRIDIR</td>
</tr>
<tr>
+<td>RUBY_SYSRIDIR</td>
<td>RUBY_USE_PTHREAD</td>
-<td>RUBY_VENDORARCHLIB</td>
</tr>
<tr>
+<td>RUBY_VENDORARCHLIB</td>
<td>RUBY_VENDORLIB</td>
-<td>RUBY_VENDORLIB_BASE</td>
</tr>
<tr>
+<td>RUBY_VENDORLIB_BASE</td>
<td>RUBY_VER</td>
-<td>RUBY_VERSION</td>
</tr>
<tr>
+<td>RUBY_VERSION</td>
<td>RUBY_VERSIONS_ACCEPTED</td>
-<td>RUBY_VERSIONS_INCOMPATIBLE</td>
</tr>
<tr>
+<td>RUBY_VERSIONS_INCOMPATIBLE</td>
<td>RUBY_VERSION_DEFAULT</td>
-<td>RUBY_VERSION_REQD</td>
</tr>
<tr>
+<td>RUBY_VERSION_REQD</td>
<td>RUBY_VER_DIR</td>
-<td>RUN</td>
</tr>
<tr>
+<td>RUN</td>
<td>RUN_LDCONFIG</td>
-<td>SAWFISH_THEMES</td>
</tr>
<tr>
+<td>SAWFISH_THEMES</td>
<td>SCO</td>
-<td>SCREWS_GROUP</td>
</tr>
<tr>
+<td>SCREWS_GROUP</td>
<td>SCREWS_USER</td>
-<td>SCRIPTS_ENV</td>
</tr>
<tr>
+<td>SCRIPTS_ENV</td>
<td>SCROLLKEEPER_DATADIR</td>
-<td>SCROLLKEEPER_REBUILDDB</td>
</tr>
<tr>
+<td>SCROLLKEEPER_REBUILDDB</td>
<td>SCROLLKEEPER_UPDATEDB</td>
-<td>SDIST_PAWD</td>
</tr>
<tr>
+<td>SDIST_PAWD</td>
<td>SERIAL_DEVICES</td>
-<td>SETGIDGAME</td>
</tr>
<tr>
+<td>SETGIDGAME</td>
<td>SETGID_GAMES_PERMS</td>
-<td>SETUID_ROOT_PERMS</td>
</tr>
<tr>
+<td>SETUID_ROOT_PERMS</td>
<td>SH</td>
-<td>SHLIB</td>
</tr>
<tr>
+<td>SHLIB</td>
<td>SHORTNAME</td>
-<td>SIGN_PACKAGES</td>
</tr>
<tr>
+<td>SIGN_PACKAGES</td>
<td>SILC_CLIENT_WITH_PERL</td>
-<td>SITE_SPECIFIC_PKGS</td>
</tr>
<tr>
+<td>SITE_SPECIFIC_PKGS</td>
<td>SKIP_DEPENDS</td>
-<td>SMF_INSTANCES</td>
</tr>
<tr>
+<td>SMF_INSTANCES</td>
<td>SMF_MANIFEST</td>
-<td>SMF_METHODS</td>
</tr>
<tr>
+<td>SMF_METHODS</td>
<td>SMF_METHOD_SHELL</td>
-<td>SMF_METHOD_SRC</td>
</tr>
<tr>
+<td>SMF_METHOD_SRC</td>
<td>SMF_NAME</td>
-<td>SMF_PREFIX</td>
</tr>
<tr>
+<td>SMF_PREFIX</td>
<td>SMF_SRCDIR</td>
-<td>SNIPROXY_GROUP</td>
</tr>
<tr>
+<td>SNIPROXY_GROUP</td>
<td>SNIPROXY_USER</td>
-<td>SOURCE_BUFFSIZE</td>
</tr>
<tr>
+<td>SOURCE_BUFFSIZE</td>
<td>SPECIAL_PERMS</td>
-<td>SPECIFIC_PKGS</td>
</tr>
<tr>
+<td>SPECIFIC_PKGS</td>
<td>SSH_SUID</td>
-<td>SSP_SUPPORTED</td>
</tr>
<tr>
+<td>SSP_SUPPORTED</td>
<td>SSYNC_PAWD</td>
-<td>STEP_MSG</td>
</tr>
<tr>
+<td>STEP_MSG</td>
<td>STRIP</td>
-<td>STRIP_DBG</td>
</tr>
<tr>
+<td>STRIP_DBG</td>
<td>STRIP_DEBUG</td>
-<td>STRIP_DEBUG_SUPPORTED</td>
</tr>
<tr>
+<td>STRIP_DEBUG_SUPPORTED</td>
<td>STRIP_FILES_SKIP</td>
-<td>SU</td>
</tr>
<tr>
+<td>SU</td>
<td>SUBDIR</td>
-<td>SUBST</td>
</tr>
<tr>
+<td>SUBST</td>
<td>SUBST_CLASSES</td>
-<td>SUBST_FILES</td>
</tr>
<tr>
+<td>SUBST_FILES</td>
<td>SUBST_FILTER_CMD</td>
-<td>SUBST_MESSAGE</td>
</tr>
<tr>
+<td>SUBST_MESSAGE</td>
<td>SUBST_NOOP_OK</td>
-<td>SUBST_SED</td>
</tr>
<tr>
+<td>SUBST_SED</td>
<td>SUBST_SHOW_DIFF</td>
-<td>SUBST_SKIP_TEXT_CHECK</td>
</tr>
<tr>
+<td>SUBST_SKIP_TEXT_CHECK</td>
<td>SUBST_STAGE</td>
-<td>SUBST_VARS</td>
</tr>
<tr>
+<td>SUBST_VARS</td>
<td>SUNWSPROBASE</td>
-<td>SUSE_PREFER</td>
</tr>
<tr>
+<td>SUSE_PREFER</td>
<td>SU_CMD</td>
-<td>SVN_EXTRACTDIR</td>
</tr>
<tr>
+<td>SVN_EXTRACTDIR</td>
<td>SVN_REPO</td>
-<td>SVN_REPOSITORIES</td>
</tr>
<tr>
+<td>SVN_REPOSITORIES</td>
<td>SVN_REVISION</td>
-<td>TERMCAP_TYPE</td>
</tr>
<tr>
+<td>TERMCAP_TYPE</td>
<td>TERMINFO_DEFAULT</td>
-<td>TERMINFO_TYPE</td>
</tr>
<tr>
+<td>TERMINFO_TYPE</td>
<td>TEST</td>
-<td>TEST_DEPENDS</td>
</tr>
<tr>
+<td>TEST_DEPENDS</td>
<td>TEST_DIRS</td>
-<td>TEST_ENV</td>
</tr>
<tr>
+<td>TEST_ENV</td>
<td>TEST_ENV_SHELL</td>
-<td>TEST_MAKE_CMD</td>
</tr>
<tr>
+<td>TEST_MAKE_CMD</td>
<td>TEST_MAKE_FLAGS</td>
-<td>TEST_TARGET</td>
</tr>
<tr>
+<td>TEST_TARGET</td>
<td>TEXLIVE_IGNORE_PATTERNS</td>
-<td>TEXLIVE_REV</td>
</tr>
<tr>
+<td>TEXLIVE_REV</td>
<td>TEXLIVE_UNVERSIONED</td>
-<td>TEXMFSITE</td>
</tr>
<tr>
+<td>TEXMFSITE</td>
<td>TEX_FORMATS</td>
-<td>TEX_HYPHEN_DAT</td>
</tr>
<tr>
+<td>TEX_HYPHEN_DAT</td>
<td>TEX_HYPHEN_DEF</td>
-<td>TEX_TEXMF_DIRS</td>
</tr>
<tr>
+<td>TEX_TEXMF_DIRS</td>
<td>THTTPD_LOG_FACILITY</td>
-<td>TO</td>
</tr>
<tr>
+<td>TO</td>
<td>TOOLS_ALIASES</td>
-<td>TOOLS_ALWAYS_WRAP</td>
</tr>
<tr>
+<td>TOOLS_ALWAYS_WRAP</td>
<td>TOOLS_ARGS</td>
-<td>TOOLS_BROKEN</td>
</tr>
<tr>
+<td>TOOLS_BROKEN</td>
<td>TOOLS_CMD</td>
-<td>TOOLS_CREATE</td>
</tr>
<tr>
+<td>TOOLS_CREATE</td>
<td>TOOLS_DIR</td>
-<td>TOOLS_FAIL</td>
</tr>
<tr>
+<td>TOOLS_FAIL</td>
<td>TOOLS_GNU_MISSING</td>
-<td>TOOLS_LDCONFIG</td>
</tr>
<tr>
+<td>TOOLS_LDCONFIG</td>
<td>TOOLS_NOOP</td>
-<td>TOOLS_PATH</td>
</tr>
<tr>
+<td>TOOLS_PATH</td>
<td>TOOLS_SCRIPT</td>
-<td>TOOL_DEPENDS</td>
</tr>
<tr>
+<td>TOOL_DEPENDS</td>
<td>TTF_FONTDIR</td>
-<td>TTF_FONTS_DIR</td>
</tr>
<tr>
+<td>TTF_FONTS_DIR</td>
<td>TYPE</td>
-<td>UAC_REQD_EXECS</td>
</tr>
<tr>
+<td>UAC_REQD_EXECS</td>
<td>UCSPI_SSL_GROUP</td>
-<td>UCSPI_SSL_USER</td>
</tr>
<tr>
+<td>UCSPI_SSL_USER</td>
<td>UNLIMIT_RESOURCES</td>
-<td>UNPRIVILEGED</td>
</tr>
<tr>
+<td>UNPRIVILEGED</td>
<td>UNPRIVILEGED_GROUP</td>
-<td>UNPRIVILEGED_GROUPS</td>
</tr>
<tr>
+<td>UNPRIVILEGED_GROUPS</td>
<td>UNPRIVILEGED_USER</td>
-<td>UNWRAP_FILES</td>
</tr>
<tr>
+<td>UNWRAP_FILES</td>
<td>UNWRAP_PATTERNS</td>
-<td>UPDATE_GEMSPEC</td>
</tr>
<tr>
+<td>UPDATE_GEMSPEC</td>
<td>UPDATE_TARGET</td>
-<td>URI</td>
</tr>
<tr>
+<td>URI</td>
<td>USERGROUP_PHASE</td>
-<td>USERPPP_GROUP</td>
</tr>
<tr>
+<td>USERPPP_GROUP</td>
<td>USER_SPECIFIC_PKGS</td>
-<td>USE_ABI_DEPENDS</td>
</tr>
<tr>
+<td>USE_ABI_DEPENDS</td>
<td>USE_APR</td>
-<td>USE_BSD_MAKEFILE</td>
</tr>
<tr>
+<td>USE_BSD_MAKEFILE</td>
<td>USE_BUILTIN</td>
-<td>USE_CROSS_COMPILE</td>
</tr>
<tr>
+<td>USE_CROSS_COMPILE</td>
<td>USE_CURSES</td>
-<td>USE_CWRAPPERS</td>
</tr>
<tr>
+<td>USE_CWRAPPERS</td>
<td>USE_DB185</td>
-<td>USE_FEATURES</td>
</tr>
<tr>
+<td>USE_FEATURES</td>
<td>USE_GAMESGROUP</td>
-<td>USE_GCC_RUNTIME</td>
</tr>
<tr>
+<td>USE_GCC_RUNTIME</td>
<td>USE_IMAKE</td>
-<td>USE_JAVA</td>
</tr>
<tr>
+<td>USE_JAVA</td>
<td>USE_JAVA2</td>
-<td>USE_LANGUAGES</td>
</tr>
<tr>
+<td>USE_LANGUAGES</td>
<td>USE_LIBTOOL</td>
-<td>USE_NATIVE_GCC</td>
</tr>
<tr>
+<td>USE_NATIVE_GCC</td>
<td>USE_NETBSD_REPO</td>
-<td>USE_PKGSRC_GCC</td>
</tr>
<tr>
+<td>USE_PKGSRC_GCC</td>
<td>USE_PKGSRC_GCC_RUNTIME</td>
-<td>USE_PKGTASKS</td>
</tr>
<tr>
+<td>USE_PKGTASKS</td>
<td>USE_PKG_ADMIN_DIGEST</td>
-<td>USE_RUBY_EXTCONF</td>
</tr>
<tr>
+<td>USE_RUBY_EXTCONF</td>
<td>USE_RUBY_INSTALL</td>
-<td>USE_RUBY_SETUP</td>
</tr>
<tr>
+<td>USE_RUBY_SETUP</td>
<td>USE_RUBY_SETUP_PKG</td>
-<td>USE_TOOLS</td>
</tr>
<tr>
+<td>USE_TOOLS</td>
<td>UUCP_GROUP</td>
-<td>UUCP_USER</td>
</tr>
<tr>
+<td>UUCP_USER</td>
<td>VARBASE</td>
-<td>VARNAME</td>
</tr>
<tr>
+<td>VARNAME</td>
<td>VIM_EXTRA_OPTS</td>
-<td>WARNING_MSG</td>
</tr>
<tr>
+<td>WARNING_MSG</td>
<td>WCALC_CGIDIR</td>
-<td>WCALC_CGIPATH</td>
</tr>
<tr>
+<td>WCALC_CGIPATH</td>
<td>WCALC_HTMLDIR</td>
-<td>WCALC_HTMLPATH</td>
</tr>
<tr>
+<td>WCALC_HTMLPATH</td>
<td>WDM_MANAGERS</td>
-<td>WRAPPER_REORDER_CMDS</td>
</tr>
<tr>
+<td>WRAPPER_REORDER_CMDS</td>
<td>WRKDIR</td>
-<td>WRKDIR_BASENAME</td>
</tr>
<tr>
+<td>WRKDIR_BASENAME</td>
<td>WRKDIR_LOCKTYPE</td>
-<td>WRKLOG</td>
</tr>
<tr>
+<td>WRKLOG</td>
<td>WRKOBJDIR</td>
-<td>WRKSRC</td>
</tr>
<tr>
+<td>WRKSRC</td>
<td>X10_PORT</td>
-<td>X11</td>
</tr>
<tr>
+<td>X11</td>
<td>X11BASE</td>
-<td>X11_PKGSRCDIR</td>
</tr>
<tr>
+<td>X11_PKGSRCDIR</td>
<td>X11_TYPE</td>
-<td>X509_CERTIFICATE</td>
</tr>
<tr>
+<td>X509_CERTIFICATE</td>
<td>X509_KEY</td>
-<td>XAW_TYPE</td>
</tr>
<tr>
+<td>XAW_TYPE</td>
<td>XLOCK_DEFAULT_MODE</td>
-<td>XMKMF_FLAGS</td>
</tr>
<tr>
+<td>XMKMF_FLAGS</td>
<td>XXX</td>
-<td>XXXX</td>
</tr>
<tr>
+<td>XXXX</td>
<td>YES</td>
-<td>ZSH_STATIC</td>
</tr>
<tr>
+<td>ZSH_STATIC</td>
<td>__stdc__</td>
-<td>_vargroups</td>
</tr>
<tr>
+<td>_vargroups</td>
<td>accept</td>
-<td>acquire-localbase-lock</td>
</tr>
<tr>
+<td>acquire-localbase-lock</td>
<td>acquire-lock</td>
-<td>add</td>
</tr>
<tr>
+<td>add</td>
<td>administrator</td>
-<td>alloca</td>
</tr>
<tr>
+<td>alloca</td>
<td>alternatives</td>
-<td>aslr</td>
</tr>
<tr>
+<td>aslr</td>
<td>asprintf</td>
-<td>atlas</td>
</tr>
<tr>
+<td>atlas</td>
<td>autoconf</td>
-<td>automake</td>
</tr>
<tr>
+<td>automake</td>
<td>autoreconf</td>
-<td>awk</td>
</tr>
<tr>
+<td>awk</td>
<td>bash</td>
-<td>big-endian</td>
</tr>
<tr>
+<td>big-endian</td>
<td>bin-install</td>
-<td>bind</td>
</tr>
<tr>
+<td>bind</td>
<td>binpkg-list</td>
-<td>blas</td>
</tr>
<tr>
+<td>blas</td>
<td>bootstrap-depends</td>
-<td>broken</td>
</tr>
<tr>
+<td>broken</td>
<td>broken_on_platform</td>
-<td>bsd</td>
</tr>
<tr>
+<td>bsd</td>
<td>bsd.prog.mk</td>
-<td>build</td>
</tr>
<tr>
+<td>build</td>
<td>build-env</td>
-<td>buildlink-directories</td>
</tr>
<tr>
+<td>buildlink-directories</td>
<td>buildlink-oss-soundcard-h</td>
-<td>c</td>
</tr>
<tr>
+<td>c</td>
<td>c++</td>
-<td>ccache</td>
</tr>
<tr>
+<td>ccache</td>
<td>cce</td>
-<td>cdefs</td>
</tr>
<tr>
+<td>cdefs</td>
<td>ceil</td>
-<td>changes</td>
</tr>
<tr>
+<td>changes</td>
<td>changes-entry</td>
-<td>changes-entry-noupdate</td>
</tr>
<tr>
+<td>changes-entry-noupdate</td>
<td>check</td>
-<td>check-clean</td>
</tr>
<tr>
+<td>check-clean</td>
<td>check-files</td>
-<td>check-files-clean</td>
</tr>
<tr>
+<td>check-files-clean</td>
<td>check-vulnerable</td>
-<td>checksum</td>
</tr>
<tr>
+<td>checksum</td>
<td>checksum-phase</td>
-<td>clean</td>
</tr>
<tr>
+<td>clean</td>
<td>clean-depends</td>
-<td>cleandir</td>
</tr>
<tr>
+<td>cleandir</td>
<td>commit</td>
-<td>commit-changes-entry</td>
</tr>
<tr>
+<td>commit-changes-entry</td>
<td>compact</td>
-<td>compiler</td>
</tr>
<tr>
+<td>compiler</td>
<td>conf</td>
-<td>config.guess</td>
</tr>
<tr>
+<td>config.guess</td>
<td>config.sub</td>
-<td>configuration</td>
</tr>
<tr>
+<td>configuration</td>
<td>configure</td>
-<td>configure-env</td>
</tr>
<tr>
+<td>configure-env</td>
<td>configure-help</td>
-<td>configure_args</td>
</tr>
<tr>
+<td>configure_args</td>
<td>connect</td>
-<td>cos</td>
</tr>
<tr>
+<td>cos</td>
<td>cputime</td>
-<td>create-usergroup</td>
</tr>
<tr>
+<td>create-usergroup</td>
<td>csh</td>
-<td>ctf</td>
</tr>
<tr>
+<td>ctf</td>
<td>cvs</td>
-<td>debug</td>
</tr>
<tr>
+<td>debug</td>
<td>declaration</td>
-<td>declare</td>
</tr>
<tr>
+<td>declare</td>
<td>defined</td>
-<td>depend</td>
</tr>
<tr>
+<td>depend</td>
<td>dependencies</td>
-<td>depends</td>
</tr>
<tr>
+<td>depends</td>
<td>depends-checksum</td>
-<td>depends-fetch</td>
</tr>
<tr>
+<td>depends-fetch</td>
<td>deps</td>
-<td>describe</td>
</tr>
<tr>
+<td>describe</td>
<td>destdir</td>
-<td>disable</td>
</tr>
<tr>
+<td>disable</td>
<td>distclean</td>
-<td>distinfo</td>
</tr>
<tr>
+<td>distinfo</td>
<td>dl</td>
-<td>dlopen</td>
</tr>
<tr>
+<td>dlopen</td>
<td>do-build</td>
-<td>do-buildlink</td>
</tr>
<tr>
+<td>do-buildlink</td>
<td>do-clean</td>
-<td>do-configure</td>
</tr>
<tr>
+<td>do-configure</td>
<td>do-configure-post-hook</td>
-<td>do-extract</td>
</tr>
<tr>
+<td>do-extract</td>
<td>do-fetch</td>
-<td>do-install</td>
</tr>
<tr>
+<td>do-install</td>
<td>emul</td>
-<td>emul-distinfo</td>
</tr>
<tr>
+<td>emul-distinfo</td>
<td>emul-fetch</td>
-<td>emulation</td>
</tr>
<tr>
+<td>emulation</td>
<td>emulator</td>
-<td>enable</td>
</tr>
<tr>
+<td>enable</td>
<td>endian</td>
-<td>endif</td>
</tr>
<tr>
+<td>endif</td>
<td>enomem</td>
-<td>err</td>
</tr>
<tr>
+<td>err</td>
<td>errx</td>
-<td>etc</td>
</tr>
<tr>
+<td>etc</td>
<td>exp</td>
-<td>extract-rpm</td>
</tr>
<tr>
+<td>extract-rpm</td>
<td>fabs</td>
-<td>feature</td>
</tr>
<tr>
+<td>feature</td>
<td>features</td>
-<td>fetch</td>
</tr>
<tr>
+<td>fetch</td>
<td>fetch-list</td>
-<td>follows</td>
</tr>
<tr>
+<td>follows</td>
<td>forbids</td>
-<td>form</td>
</tr>
<tr>
+<td>form</td>
<td>format</td>
-<td>fortify</td>
</tr>
<tr>
+<td>fortify</td>
<td>fortify_source</td>
-<td>fossil</td>
</tr>
<tr>
+<td>fossil</td>
<td>friend</td>
-<td>fts</td>
</tr>
<tr>
+<td>fts</td>
<td>fts_close</td>
-<td>fts_open</td>
</tr>
<tr>
+<td>fts_open</td>
<td>fts_read</td>
-<td>fts_set</td>
</tr>
<tr>
+<td>fts_set</td>
<td>gcc</td>
-<td>gethostbyaddr</td>
</tr>
<tr>
+<td>gethostbyaddr</td>
<td>gethostbyname</td>
-<td>gethostbyname2</td>
</tr>
<tr>
+<td>gethostbyname2</td>
<td>getopt_long</td>
-<td>getprogname</td>
</tr>
<tr>
+<td>getprogname</td>
<td>getservbyname</td>
-<td>getservbyport</td>
</tr>
<tr>
+<td>getservbyport</td>
<td>getservent</td>
-<td>gettext</td>
</tr>
<tr>
+<td>gettext</td>
<td>git</td>
-<td>github</td>
</tr>
<tr>
+<td>github</td>
<td>gitlab</td>
-<td>glob</td>
</tr>
<tr>
+<td>glob</td>
<td>gnu</td>
-<td>gnu_configure_strict</td>
</tr>
<tr>
+<td>gnu_configure_strict</td>
<td>go</td>
-<td>go-deps</td>
</tr>
<tr>
+<td>go-deps</td>
<td>golang</td>
-<td>guess-license</td>
</tr>
<tr>
+<td>guess-license</td>
<td>hashbang</td>
-<td>heimdal</td>
</tr>
<tr>
+<td>heimdal</td>
<td>help</td>
-<td>hg</td>
</tr>
<tr>
+<td>hg</td>
<td>imake</td>
-<td>increment</td>
</tr>
<tr>
+<td>increment</td>
<td>inet_aton</td>
-<td>interp</td>
</tr>
<tr>
+<td>interp</td>
<td>interpreter</td>
-<td>intl</td>
</tr>
<tr>
+<td>intl</td>
<td>iso</td>
-<td>kerberos</td>
</tr>
<tr>
+<td>kerberos</td>
<td>krb</td>
-<td>krb5</td>
</tr>
<tr>
+<td>krb5</td>
<td>ksh</td>
-<td>lapack</td>
</tr>
<tr>
+<td>lapack</td>
<td>latex</td>
-<td>libintl_bindtextdomain</td>
</tr>
<tr>
+<td>libintl_bindtextdomain</td>
<td>libintl_gettext</td>
-<td>libintl_textdomain</td>
</tr>
<tr>
+<td>libintl_textdomain</td>
<td>libnbcompat</td>
-<td>libs</td>
</tr>
<tr>
+<td>libs</td>
<td>libtool</td>
-<td>licence</td>
</tr>
<tr>
+<td>licence</td>
<td>license</td>
-<td>lintl</td>
</tr>
<tr>
+<td>lintl</td>
<td>little-endian</td>
-<td>lock</td>
</tr>
<tr>
+<td>lock</td>
<td>locking</td>
-<td>lvalue</td>
</tr>
<tr>
+<td>lvalue</td>
<td>make</td>
-<td>makesum</td>
</tr>
<tr>
+<td>makesum</td>
<td>memory</td>
-<td>mercurial</td>
</tr>
<tr>
+<td>mercurial</td>
<td>meta</td>
-<td>meta-package</td>
</tr>
<tr>
+<td>meta-package</td>
<td>meta_package</td>
-<td>mit-krb5</td>
</tr>
<tr>
+<td>mit-krb5</td>
<td>mk.conf</td>
-<td>mkl</td>
</tr>
<tr>
+<td>mkl</td>
<td>mount</td>
-<td>mprotect</td>
</tr>
<tr>
+<td>mprotect</td>
<td>mremap</td>
-<td>nb</td>
</tr>
<tr>
+<td>nb</td>
<td>nbcompat</td>
-<td>obstack</td>
</tr>
<tr>
+<td>obstack</td>
<td>obstack_ptr_grow</td>
-<td>occurs</td>
</tr>
<tr>
+<td>occurs</td>
<td>only</td>
-<td>openblas</td>
</tr>
<tr>
+<td>openblas</td>
<td>options</td>
-<td>options.mk</td>
</tr>
<tr>
+<td>options.mk</td>
<td>order</td>
-<td>override</td>
</tr>
<tr>
+<td>override</td>
<td>override-intltool</td>
-<td>override-message-intltool</td>
</tr>
<tr>
+<td>override-message-intltool</td>
<td>package</td>
-<td>parallel</td>
</tr>
<tr>
+<td>parallel</td>
<td>path</td>
-<td>pax</td>
</tr>
<tr>
+<td>pax</td>
<td>paxctl</td>
-<td>pbulk-index</td>
</tr>
<tr>
+<td>pbulk-index</td>
<td>pc</td>
-<td>perl</td>
</tr>
<tr>
+<td>perl</td>
<td>perl5</td>
-<td>perms</td>
</tr>
<tr>
+<td>perms</td>
<td>php</td>
-<td>pkg-build-options</td>
</tr>
<tr>
+<td>pkg-build-options</td>
<td>pkg-config</td>
-<td>pkg_build_options</td>
</tr>
<tr>
+<td>pkg_build_options</td>
<td>platform</td>
-<td>plist</td>
</tr>
<tr>
+<td>plist</td>
<td>post-extract</td>
-<td>post-fetch</td>
</tr>
<tr>
+<td>post-fetch</td>
<td>post-wrapper</td>
-<td>pre-build-checks-hook</td>
</tr>
<tr>
+<td>pre-build-checks-hook</td>
<td>pre-configure</td>
-<td>pre-configure-checks-hook</td>
</tr>
<tr>
+<td>pre-configure-checks-hook</td>
<td>pre-extract</td>
-<td>pre-fetch</td>
</tr>
<tr>
+<td>pre-fetch</td>
<td>print-go-deps</td>
-<td>print-plist</td>
</tr>
<tr>
+<td>print-plist</td>
<td>print-summary-data</td>
-<td>privileged-install-hook</td>
</tr>
<tr>
+<td>privileged-install-hook</td>
<td>pypi</td>
-<td>python</td>
</tr>
<tr>
+<td>python</td>
<td>readme-all</td>
-<td>recv</td>
</tr>
<tr>
+<td>recv</td>
<td>recvfrom</td>
-<td>regcomp</td>
</tr>
<tr>
+<td>regcomp</td>
<td>release-localbase-lock</td>
-<td>release-lock</td>
</tr>
<tr>
+<td>release-lock</td>
<td>relro</td>
-<td>rename</td>
</tr>
<tr>
+<td>rename</td>
<td>reorder</td>
-<td>replace</td>
</tr>
<tr>
+<td>replace</td>
<td>replace_interpreter</td>
-<td>reproducible</td>
</tr>
<tr>
+<td>reproducible</td>
<td>resolv</td>
-<td>root</td>
</tr>
<tr>
+<td>root</td>
<td>ruby</td>
-<td>send</td>
</tr>
<tr>
+<td>send</td>
<td>sendfile</td>
-<td>sendto</td>
</tr>
<tr>
+<td>sendto</td>
<td>setenv</td>
-<td>setgid</td>
</tr>
<tr>
+<td>setgid</td>
<td>setprogname</td>
-<td>setuid</td>
</tr>
<tr>
+<td>setuid</td>
<td>sh</td>
-<td>show</td>
</tr>
<tr>
+<td>show</td>
<td>show-all</td>
-<td>show-build-defs</td>
</tr>
<tr>
+<td>show-build-defs</td>
<td>show-depends</td>
-<td>show-deps</td>
</tr>
<tr>
+<td>show-deps</td>
<td>show-distfiles</td>
-<td>show-downlevel</td>
</tr>
<tr>
+<td>show-downlevel</td>
<td>show-subdir-var</td>
-<td>show-tools</td>
</tr>
<tr>
+<td>show-tools</td>
<td>show-var</td>
-<td>show-vars</td>
</tr>
<tr>
+<td>show-vars</td>
<td>snprintf</td>
-<td>socket</td>
</tr>
<tr>
+<td>socket</td>
<td>ssp</td>
-<td>st_mode</td>
</tr>
<tr>
+<td>st_mode</td>
<td>stage-install</td>
-<td>strcasestr</td>
</tr>
<tr>
+<td>strcasestr</td>
<td>strict</td>
-<td>strip</td>
</tr>
<tr>
+<td>strip</td>
<td>strndup</td>
-<td>strnlen</td>
</tr>
<tr>
+<td>strnlen</td>
<td>strsep</td>
-<td>subst</td>
</tr>
<tr>
+<td>subst</td>
<td>substitutions</td>
-<td>subversion</td>
</tr>
<tr>
+<td>subversion</td>
<td>sun</td>
-<td>sunpro</td>
</tr>
<tr>
+<td>sunpro</td>
<td>sunwspro</td>
-<td>svn</td>
</tr>
<tr>
+<td>svn</td>
<td>symlink</td>
-<td>test</td>
</tr>
<tr>
+<td>test</td>
<td>test-env</td>
-<td>tex</td>
</tr>
<tr>
+<td>tex</td>
<td>texlive</td>
-<td>tmp</td>
</tr>
<tr>
+<td>tmp</td>
<td>tool</td>
-<td>tools</td>
</tr>
<tr>
+<td>tools</td>
<td>tools-libtool-m4-override</td>
-<td>type</td>
</tr>
<tr>
+<td>type</td>
<td>ulimit</td>
-<td>undefined</td>
</tr>
<tr>
+<td>undefined</td>
<td>undo-replace</td>
-<td>unlimit</td>
</tr>
<tr>
+<td>unlimit</td>
<td>unprivileged</td>
-<td>unprivileged-install-hook</td>
</tr>
<tr>
+<td>unprivileged-install-hook</td>
<td>unstripped</td>
-<td>update</td>
</tr>
<tr>
+<td>update</td>
<td>upload</td>
-<td>upload-distfiles</td>
</tr>
<tr>
+<td>upload-distfiles</td>
<td>use_tools</td>
-<td>user</td>
</tr>
<tr>
+<td>user</td>
<td>utimes</td>
-<td>vasprintf</td>
</tr>
<tr>
+<td>vasprintf</td>
<td>verbose</td>
-<td>vsnprintf</td>
</tr>
<tr>
+<td>vsnprintf</td>
<td>warn</td>
-<td>warning</td>
</tr>
<tr>
+<td>warning</td>
<td>warnings</td>
-<td>warnx</td>
</tr>
<tr>
+<td>warnx</td>
<td>wattr_off</td>
-<td>wattr_on</td>
</tr>
<tr>
+<td>wattr_on</td>
<td>work</td>
-<td>wrapper</td>
</tr>
<tr>
+<td>wrapper</td>
<td>wrkdir</td>
-<td>�</td>
</tr>
</table>
</div>
Index: pkgsrc/doc/pkgsrc.txt
diff -u pkgsrc/doc/pkgsrc.txt:1.292 pkgsrc/doc/pkgsrc.txt:1.293
--- pkgsrc/doc/pkgsrc.txt:1.292 Sat May 30 19:25:38 2020
+++ pkgsrc/doc/pkgsrc.txt Fri Jun 5 07:34:49 2020
@@ -102,7 +102,7 @@ I. The pkgsrc user's guide
8. Creating binary packages for everything in pkgsrc (bulk builds)
8.1. Preparations
- 8.2. Running a pbulk-style bulk build
+ 8.2. Running a bulk build
8.2.1. Configuration
@@ -755,7 +755,7 @@ Table of Contents
8. Creating binary packages for everything in pkgsrc (bulk builds)
8.1. Preparations
- 8.2. Running a pbulk-style bulk build
+ 8.2. Running a bulk build
8.2.1. Configuration
@@ -1725,7 +1725,7 @@ Chapter 8. Creating binary packages for
Table of Contents
8.1. Preparations
-8.2. Running a pbulk-style bulk build
+8.2. Running a bulk build
8.2.1. Configuration
@@ -1775,9 +1775,9 @@ effect this makes sure that bulk builds
There have been numerous cases where certain packages tried to install files
outside the LOCALBASE or wanted to edit some files in /etc.
-8.2. Running a pbulk-style bulk build
+8.2. Running a bulk build
-Running a pbulk-style bulk build works roughly as follows:
+Running a bulk build works roughly as follows:
* First, build the pbulk infrastructure in a fresh pkgsrc location.
@@ -5266,10 +5266,10 @@ are uncompressed before they are applied
ignored. Any special options to patch(1) can be handed in PATCH_DIST_ARGS. See
Section 13.3, "patches/*" for more details.
-By default patch(1) is given special args to make it fail if the patches apply
-with some lines of fuzz. Please fix (regen) the patches so that they apply
-cleanly. The rationale behind this is that patches that don't apply cleanly may
-end up being applied in the wrong place, and cause severe harm there.
+By default patch(1) is given special arguments to make it fail if the expected
+text from the patch context is not found in the patched file. If that happens,
+fix the patch file by comparing it with the actual text in the file to be
+patched.
19.9. The tools phase
@@ -6345,65 +6345,203 @@ PKGREVISION must also be incremented whe
21.1.11. Substituting variable text in the package files (the SUBST framework)
-When you want to replace the same text in multiple files or when the
-replacement text varies, patches alone cannot help. This is where the SUBST
-framework comes in. It provides an easy-to-use interface for replacing text in
-files. It just needs the following information:
+When you want to replace the same text in multiple files, or multiple times in
+the same file, it is cumbersome to maintain a patch file for this. This is
+where the SUBST framework steps in. It provides an easy-to-use interface for
+replacing text in files. It just needs the following information:
- * When should the replacement happen?
+ * In which phase of the package build cycle should the replacement happen?
- * Where should the replacement happen, i.e. in which files?
+ * In which files should the replacement happen?
* Which text should be replaced with what?
-This information is encoded in a block of SUBST variables, like in this
-example:
+This information is encoded in a block of SUBST variables. A minimal example
+is:
+
+SUBST_CLASSES+= paths
+SUBST_STAGE.paths= pre-configure
+SUBST_FILES.paths= src/*.c
+SUBST_SED.paths= -e 's,/usr/local,${PREFIX},g'
+
+Translated into English, it means: In the pre-configure stage (that is, after
+applying the patches from the patches/ directory and before running the
+configure script and the portability check), replace the text /usr/local with
+the content of the variable PREFIX.
+
+Each SUBST block starts by appending an identifier to SUBST_CLASSES (note the +
+=). This identifier can be chosen freely by the package. If there should ever
+be duplicate identifiers, the pkgsrc infrastructure will catch this and fail
+early, so don't worry about name collisions.
+
+Except for SUBST_CLASSES, all variables in a SUBST block are parameterized
+using this identifier. In the remainder of this section, these parameterized
+variables are written as SUBST_STAGE.*.
+
+SUBST_CLASSES+= paths
+SUBST_STAGE.paths= pre-configure
+SUBST_MESSAGE.paths= Fixing absolute paths.
+SUBST_FILES.paths= src/*.c
+SUBST_FILES.paths+= scripts/*.sh
+SUBST_SED.paths= -e 's,"/usr/local,"${PREFIX},g'
+SUBST_SED.paths+= -e 's,"/var/log,"${VARBASE}/log,g'
+SUBST_VARS.paths= LOCALBASE PREFIX PKGVERSION
+
+To get a complete picture about the SUBST substitutions, run bmake
+show-all-subst. If something doesn't work as expected, run pkglint on the
+package, which detects several typical mistakes surrounding the SUBST blocks.
+For any questions that might remain after this, have a look at mk/subst.mk.
+
+21.1.11.1. Choosing the time where the substitutions happen
+
+The SUBST_STAGE.* is one of {pre,do,post}-
+{extract,patch,configure,build,test,install}. Of these, pre-configure is used
+most often, by far. The most popular stages are, in chronological order:
+
+post-extract
+
+ The substitutions are applied immediately after the distfiles are
+ extracted. Running bmake extract on the package will leave no traces of the
+ original files.
+
+ When the substitution applies to files for which there is also a patch in
+ the patches/ directory, this means that the patches will be computed based
+ on the result of the substitution. When these patches are sent to the
+ upstream maintainer later, to be fixed in the upstream package, these
+ patches may no longer match what the upstream author is used to. Because of
+ this, pre-configure is often a better choice.
+
+pre-configure
+
+ The substitutions are applied after the patches from the patches/
+ directory. This makes it possible to run bmake patch on the package, after
+ which the patches can be edited using the tools pkgvi and mkpatches from
+ the pkgtools/pkgdiff package.
+
+ When updating the patches, it is helpful to explicitly separate the bmake
+ patch from the bmake configure, and to only edit the patches between these
+ commands. Otherwise the substitutions from the SUBST block will end up in
+ the patch file. When this happens in really obvious ways, pkglint will
+ complain about patches that contain a hard-coded /usr/pkg instead of the
+ correct and intended @PREFIX@, but it can only detect these really obvious
+ cases.
+
+do-configure
+
+ This stage should only be used if the package defines a pre-configure
+ action itself, and the substitution must happen after that. Typical
+ examples are packages that use the pre-configure stage to regenerate the
+ GNU configure script from configure.ac.
+
+post-configure
+
+ This stage is used to fix up any mistakes by the configure stage.
+
+pre-build
+
+ This stage should only be used for substitutions that are clearly related
+ to building the package, not for fixing the configuration. Substitutions
+ for pathnames (such as replacing /usr/local with ${PREFIX}) or user names
+ (such as replacing @MY_USER@ with the actual username) belong in
+ pre-configure or post-configure instead.
+
+post-build
+
+ Just as with pre-build, this stage should only be used for substitutions
+ that are clearly related to building the package, not for fixing the
+ configuration. Substitutions for pathnames (such as replacing /usr/local
+ with ${PREFIX}) or user names (such as replacing @MY_USER@ with the actual
+ username) belong in pre-configure or post-configure instead.
+
+ A typical use is to update pkg-config files to include the rpath compiler
+ options.
+
+pre-install
+
+ In general, the install phase should be as simple as possible. As with the
+ pre-build and post-build stages, it should not be used to fix pathnames or
+ user names, these belong in pre-configure instead. There are only few
+ legitimate use cases for applying substitutions in this stage.
+
+21.1.11.2. Choosing the time where the substitutions happen
+
+The SUBST_FILES.* variable contains a list of filename patterns. These patterns
+are relative to WRKSRC since that is where most substitutions happen. A typical
+example is:
+
+SUBST_FILES.path= Makefile */Makefile */*/Makefile *.[ch]
+
+The above patterns, especially the last, are quite broad. The SUBST
+implementation checks that each filename pattern that is mentioned here has an
+effect. For example, if none of the */*/Makefile files contains the patterns to
+be found and substituted, that filename pattern is redundant and should be left
+out. If the text to be substituted occurs in some of the files from a single
+pattern, but not in all of them, that is totally ok, and the SUBST framework
+will only print an INFO message for those files.
+
+If there is a good reason for having redundant filename patterns, set
+SUBST_NOOP_OK.path=yes in the above example.
+
+Another popular way of choosing the files for the substitutions is via a shell
+command, like this:
+
+C_FILES_CMD= cd ${WRKSRC} && ${FIND} -name '*.c'
+SUBST_FILES.path= ${C_FILES_CMD:sh}
+
+The variable name C_FILES_CMD in this example is freely chosen and independent
+of the SUBST framework.
+
+In this variant, the SUBST_FILES.* variable lists each file individually.
+Thereby chances are higher that there are filename patterns in which no
+substitution happens. Since the SUBST framework cannot know whether the
+filename patterns in SUBST_FILES.* have been explicitly listed in the Makefile
+(where any redundant filename pattern would be suspicious) or been generated by
+a shell command (in which redundant filename patterns are more likely and to be
+expected), it will complain about these redundant filename patterns. Therefore,
+SUBST blocks that use a shell command to generate the list of filename patterns
+often need to set SUBST_NOOP_OK.* to yes.
+
+21.1.11.3. Choosing what to substitute
+
+In most cases, the substitutions are given using one or more sed(1) commands,
+like this:
+
+SUBST_SED.path= -e 's|/usr/local|${PREFIX}|g'
+
+Each of the sed commands needs to be preceded by the -e option and should be
+specified on a line of its own, to avoid hiding short sed commands at the end
+of a line.
+
+Since the sed commands often contain shell metacharacters as the separator (the
+| in the above example), it is common to enclose them in single quotes.
+
+A common substitution is to replace placeholders of the form @VARNAME@ with
+their pkgsrc counterpart variable ${VARNAME}. A typical example is:
+
+SUBST_VARS.path= PREFIX
+
+This type of substitutions is typically done by the GNU configure scripts, but
+in some cases these need to be overridden. The same pattern is also used when a
+package defines patches that replace previously hard-coded paths like /usr/
+local with a @PREFIX@ placeholder first, which then gets substituted by the
+actual ${PREFIX} in the pre-configure stage. In many of these cases, it works
+equally well to just use the SUBST framework to directly replace /usr/local
+with ${PREFIX}, thereby omitting the intermediate patch file.
+
+If the above is not flexible enough, it is possible to not use sed at all for
+the substitution but to specify an entirely different command, like this:
+
+SUBST_FILTER_CMD.path= LC_ALL=C ${TR} -d '\r'
-SUBST_CLASSES+= fix-paths
-SUBST_STAGE.fix-paths= pre-configure
-SUBST_MESSAGE.fix-paths= Fixing absolute paths.
-SUBST_FILES.fix-paths= src/*.c
-SUBST_FILES.fix-paths+= scripts/*.sh
-SUBST_SED.fix-paths= -e 's,"/usr/local,"${PREFIX},g'
-SUBST_SED.fix-paths+= -e 's,"/var/log,"${VARBASE}/log,g'
-
-SUBST_CLASSES is a list of identifiers that are used to identify the different
-SUBST blocks that are defined. The SUBST framework is heavily used by pkgsrc,
-so it is important to always use the += operator with this variable. Otherwise
-some substitutions may be skipped.
-
-The remaining variables of each SUBST block are parameterized with the
-identifier from the first line (fix-paths in this case.) They can be seen as
-parameters to a function call.
-
-SUBST_STAGE.* specifies the stage at which the replacement will take place. All
-combinations of pre-, do- and post- together with a phase name are possible,
-though only few are actually used. Most commonly used are post-patch and
-pre-configure. Of these two, pre-configure should be preferred because then it
-is possible to run bmake patch and have the state after applying the patches
-but before making any other changes. This is especially useful when you are
-debugging a package in order to create new patches for it. Similarly,
-post-build is preferred over pre-install, because the install phase should
-generally be kept as simple as possible. When you use post-build, you have the
-same files in the working directory that will be installed later, so you can
-check if the substitution has succeeded.
-
-SUBST_MESSAGE.* is an optional text that is printed just before the
-substitution is done.
-
-SUBST_FILES.* is the list of shell globbing patterns that specifies the files
-in which the substitution will take place. The patterns are interpreted
-relatively to the WRKSRC directory.
-
-SUBST_SED.* is a list of arguments to sed(1) that specify the actual
-substitution. Every sed command should be prefixed with -e, so that all SUBST
-blocks look uniform.
+This is used for the few remaining packages in which the distributed files use
+Windows-style line endings that need to be converted to UNIX-style line
+endings.
-SUBST_VARS.* is a list of variable names. For each of these variables, the text
-@VAR@ is replaced with the value of the variable VAR.
+21.1.11.4. Other SUBST variables
-There are some more variables, but they are so seldomly used that they are only
-documented in the mk/subst.mk file.
+When a SUBST block is applied during a package build, a message is logged. The
+default message is fine for most purposes but can be overridden by setting
+SUBST_MESSAGE.* to an individual message.
21.2. The fetch phase
@@ -8892,718 +9030,718 @@ Appendix D. Help topics
The following list contains all help topics that are available when running
bmake help topic=:index.
-#! -lintl
-64bit ABI
-ACCEPTABLE_LICENSES ACROREAD_FONTPATH
-ADDITIONAL AFAIK
-AIX ALLOW_VULNERABLE_PACKAGES
-ALL_ENV ALSA_PC
-ALTERNATIVES_SRC AMANDA_TMP
-AMANDA_USER AMANDA_VAR
-APACHE_GROUP APACHE_MODULE_NAME
-APACHE_MODULE_SRC APACHE_MODULE_SRCDIR
-APACHE_PKG_PREFIX APACHE_SUEXEC_CONFIGURE_ARGS
-APACHE_SUEXEC_DOCROOT APACHE_USER
-APPEND_ABI APPEND_ELF
-ARLA_CACHE AUDIT_PACKAGES_FLAGS
-AUTOCONF_REQD AUTOMAKE_OVERRIDE
-AUTOMAKE_REQD AUTO_MKDIRS
-BDB185_DEFAULT BDBBASE
-BDB_ACCEPTED BDB_DEFAULT
-BDB_LIBS BDB_TYPE
-BIND_DIR BIND_GROUP
-BIND_USER BINPKG_SITES
-BIN_INSTALL_FLAGS BISON_PKGDATADIR
-BLAS_ACCEPTED BLAS_LIBS
-BLAS_TYPE BOOTSTRAP_DEPENDS
-BOOTSTRAP_SETUPTOOLS BROKEN
-BROKEN_EXCEPT_ON_PLATFORM BROKEN_ON_PLATFORM
-BSDSRCDIR BSDXSRCDIR
-BSD_MAKE_ENV BUILDLINK_AUTO_DIRS
-BUILDLINK_AUTO_VARS BUILDLINK_CFLAGS
-BUILDLINK_CONTENTS_FILTER BUILDLINK_CPPFLAGS
-BUILDLINK_DEPMETHOD BUILDLINK_FILES
-BUILDLINK_FILES_CMD BUILDLINK_FNAME_TRANSFORM
-BUILDLINK_LDFLAGS BUILDLINK_LIBS
-BUILDLINK_OPSYS_SUPPORT_PTHREAD BUILDLINK_PKGNAME
-BUILDLINK_PREFIX BUILDLINK_RPATHDIRS
-BUILDLINK_TREE BUILD_DEFS
-BUILD_DEFS_EFFECTS BUILD_DEPENDS
-BUILD_DIRS BUILD_ENV_SHELL
-BUILD_MAKE_CMD BUILD_MAKE_FLAGS
-BUILD_TARGET BUILTIN_FIND_FILES
-BUILTIN_FIND_FILES_VAR BUILTIN_FIND_GREP
-BUILTIN_FIND_HEADERS BUILTIN_FIND_HEADERS_VAR
-BUILTIN_PKG BUILTIN_TEST_CURSES_DEFINES
-BUILTIN_TEST_CURSES_FUNCS BUILTIN_VERSION_SCRIPT
-BUILTIN_X11_TYPE BUILTIN_X11_VERSION
-CACTI_GROUP CACTI_USER
-CANNA_GROUP CANNA_USER
-CAT CCACHE_BASE
-CCACHE_DIR CCACHE_LOGFILE
-CC_VERSION CC_VERSION_STRING
-CDRECORD_CONF CDROM_PKG_URL_DIR
-CDROM_PKG_URL_HOST CHECKOUT_DATE
-CHECK_FAKEHOME CHECK_FILES
-CHECK_FILES_SKIP CHECK_FILES_STRICT
-CHECK_HEADERS CHECK_HEADERS_SKIP
-CHECK_INTERPRETER CHECK_INTERPRETER_SKIP
-CHECK_PERMS CHECK_PERMS_AUTOFIX
-CHECK_PERMS_SKIP CHECK_PORTABILITY
-CHECK_PORTABILITY_EXPERIMENTAL CHECK_PORTABILITY_SKIP
-CHECK_RELRO CHECK_RELRO_SKIP
-CHECK_RELRO_SUPPORTED CHECK_SHLIBS
-CHECK_SHLIBS_BLACKLIST CHECK_SHLIBS_SKIP
-CHECK_SHLIBS_SUPPORTED CHECK_SSP
-CHECK_SSP_SKIP CHECK_SSP_SUPPORTED
-CHECK_STRIPPED CHECK_STRIPPED_SKIP
-CHECK_WRKREF CHECK_WRKREF_EXTRA_DIRS
-CHECK_WRKREF_SKIP CLAMAV_DBDIR
-CLAMAV_GROUP CLAMAV_USER
-CLANGBASE CLEANDEPENDS
-CMAKE_DEPENDENCIES_REWRITE CMAKE_INSTALL_PREFIX
-CMAKE_MODULE_PATH_OVERRIDE CMAKE_PKGSRC_BUILD_FLAGS
-CMAKE_PREFIX_PATH CMAKE_USE_GNU_INSTALL_DIRS
-COMMON_LISP_DOCFILES COMMON_LISP_EXAMPLES
-COMMON_LISP_EXTRAFILES COMMON_LISP_PACKAGES
-COMMON_LISP_SYSTEM COMPILER_RPATH_FLAG
-COMPILER_USE_SYMLINKS CONFIGURE_ARGS
-CONFIGURE_DIRS CONFIGURE_ENV
-CONFIGURE_ENV_SHELL CONFIGURE_HAS_INFODIR
-CONFIGURE_HAS_MANDIR CONFIGURE_SCRIPT
-CONFIG_SHELL CONFIG_SHELL_FLAGS
-CONF_FILES CONF_FILES_MODE
-CONF_FILES_PERMS CONSERVER_DEFAULTHOST
-CONSERVER_DEFAULTPORT CP
-CPP CPP_PRECOMP_FLAGS
-CREATE_WRKDIR_SYMLINK CROSSBASE
-CTFCONVERT CTF_FILES_SKIP
-CTF_SUPPORTED CTYPE
-CUPS_GROUP CUPS_SYSTEM_GROUPS
-CUPS_USER CURSES_DEFAULT
-CURSES_TYPE CVS_EXTRACTDIR
-CVS_MODULE CVS_PROJECT
-CVS_REPOSITORIES CVS_ROOT
-CVS_ROOT_GNU CVS_ROOT_NONGNU
-CVS_ROOT_SOURCEFORGE CVS_TAG
-CXX CYRUS_GROUP
-CYRUS_IDLE CYRUS_USER
-DAEMONTOOLS_GROUP DAEMONTOOLS_LOG_USER
-DBUS_GROUP DBUS_USER
-DEFANG_GROUP DEFANG_USER
-DEFAULT_ACCEPTABLE_LICENSES DEFAULT_DISTFILES
-DEFAULT_IRC_SERVER DEFAULT_SERIAL_DEVICE
-DEF_UMASK DEINSTALLDEPENDS
-DEINSTALL_SRC DEINSTALL_TEMPLATES
-DELAYED_ERROR_MSG DELAYED_WARNING_MSG
-DEPENDS DEPENDS_TARGET
-DEPENDS_TYPE DESTDIR
-DESTDIR_VARNAME DIALER_GROUP
-DIGEST_REQD DISTDIR
-DISTFILES DISTINFO_FILE
-DISTNAME DIST_PATH
-DIST_SUBDIR DJBDNS_AXFR_USER
-DJBDNS_CACHE_USER DJBDNS_DJBDNS_GROUP
-DJBDNS_LOG_USER DJBDNS_RBL_USER
-DJBDNS_TINY_USER DLOPEN_REQUIRE_PTHREADS
-DL_AUTO_VARS DL_CFLAGS
-DL_LDFLAGS DL_LIBS
-DNS DOWNLOADED_DISTFILE
-DT_LAYOUT DYNAMIC_SITES_CMD
-DYNAMIC_SITES_SCRIPT ECHO
-ECHO_N ELK_GUI
-EMACS_TYPE EMULDIR
-EMULSUBDIR EMULSUBDIRSLASH
-EMUL_ARCH EMUL_DISTRO
-EMUL_EXEC_FMT EMUL_IS_NATIVE
-EMUL_MODULES EMUL_OPSYS
-EMUL_PKG_FMT EMUL_PLATFORM
-EMUL_PLATFORMS EMUL_PREFER
-EMUL_REQD EMUL_TYPE
-ERROR_MSG EXIM_GROUP
-EXIM_USER EXPORT_SYMBOLS_LDFLAGS
-EXTRACTOR EXTRACT_CMD
-EXTRACT_CMD_DEFAULT EXTRACT_DIR
-EXTRACT_ELEMENTS EXTRACT_ENV
-EXTRACT_ONLY EXTRACT_OPTS
-EXTRACT_SUFX EXTRACT_USING
-FAIL FAILOVER_FETCH
-FAIL_MSG FAKE_NCURSES
-FAM FAM_ACCEPTED
-FAM_DEFAULT FAM_SERVER
-FCPATH FEATURE_CPPFLAGS
-FEATURE_LDFLAGS FEATURE_LIBS
-FETCH_AFTER_ARGS FETCH_BEFORE_ARGS
-FETCH_CMD FETCH_OUTPUT_ARGS
-FETCH_PROXY FETCH_RESUME_ARGS
-FETCH_USING FILES_SUBST
-FILES_SUBST_SED FIX_SYSTEM_HEADERS
-FLUXBOX_USE_GNOME FLUXBOX_USE_KDE
-FLUXBOX_USE_XFT FLUXBOX_USE_XINERAMA
-FONTDIR FONTS_DIRS
-FONTS_VERBOSE FOO_HACKS_MK
-FOSSIL_EXTRACTDIR FOSSIL_REPO
-FOSSIL_REPOSITORIES FOSSIL_VERSION
-FOX_USE_XUNICODE FREEWNN_GROUP
-FREEWNN_USER FTP_PKG_URL_DIR
-FTP_PKG_URL_HOST GAMEDATAMODE
-GAMEDATA_PERMS GAMEDIRMODE
-GAMEDIR_PERMS GAMEGRP
-GAMEMODE GAMEOWN
-GAMES_GROUP GAMES_USER
-GCC GCCBASE
-GCC_REQD GCC_VERSION_SUFFIX
-GEM_BUILD GEM_CLEANBUILD
-GEM_CLEANBUILD_EXTENSIONS GEM_DOCDIR
-GEM_EXTSDIR GEM_HOME
-GEM_KEEPBUILD GEM_LIBDIR
-GEM_NAME GEM_PATH
-GEM_SPECFILE GENERATE_PLIST
-GHOSTSCRIPT_REQD GITHUB_PROJECT
-GITHUB_RELEASE GITHUB_TAG
-GITHUB_TYPE GITLAB_PROJECT
-GITLAB_TAG GITLAB_TYPE
-GIT_BRANCH GIT_ENV
-GIT_EXTRACTDIR GIT_REPO
-GIT_REPOSITORIES GIT_REVISION
-GIT_TAG GNU
-GNU_CONFIGURE GNU_CONFIGURE_INFODIR
-GNU_CONFIGURE_MANDIR GNU_CONFIGURE_QUIET
-GNU_CONFIGURE_STRICT GODEP_REDIRECTS
-GO_BUILD_PATTERN GO_DEPS
-GO_DIST_BASE GO_MODULE_FILES
-GO_SRCPATH GO_VERSION_DEFAULT
-GROUP_SPECIFIC_PKGS GRUB_NETWORK_CARDS
-GRUB_PRESET_COMMAND GRUB_SCAN_ARGS
-GZIP HASKELL_COMPILER
-HASKELL_ENABLE_HADDOCK_DOCUMENTATION HASKELL_ENABLE_LIBRARY_PROFILING
-HASKELL_ENABLE_SHARED_LIBRARY HASKELL_OPTIMIZATION_LEVEL
-HAS_CONFIGURE HEADER_TEMPLATES
-HG_REPO HG_REPOSITORIES
-HG_TAG HOST_PKGTOOLS_ARGS
-HOST_SPECIFIC_PKGS HOWL_GROUP
-HOWL_USER ICCBASE
-ICECAST_CHROOTDIR ICON_THEMES
-IDOBASE IGNORE_CCACHE
-IGNORE_INFO_DIRS IGNORE_INTERACTIVE_FETCH
-IMAKE IMAKEOPTS
-IMAKE_MAKE IMAKE_MANINSTALL
-IMAP_UW_CCLIENT_MBOX_FMT IMDICTDIR
-INCOMPAT_CURSES INFO_DIR
-INFO_FILES INFO_FILES_VERBOSE
-INFO_MSG INIT_SYSTEM
-INN_DATA_DIR INN_GROUP
-INN_USER INSTALLATION_DIRS
-INSTALLATION_DIRS_FROM_PLIST INSTALL_ENV
-INSTALL_SH_OVERRIDE INSTALL_SRC
-INSTALL_TEMPLATES INSTALL_UNSTRIPPED
-IRCD_HYBRID_IRC_GROUP IRCD_HYBRID_IRC_USER
-IRCD_HYBRID_MAXCONN IRCD_HYBRID_NICLEN
-IRCD_HYBRID_SYSLOG_EVENTS IRCD_HYBRID_SYSLOG_FACILITY
-IRCD_HYBRID_TOPICLEN IRIX
-IRRD_USE_PGP JABBERD_GROUP
-JABBERD_LOGDIR JABBERD_PIDDIR
-JABBERD_SPOOLDIR JABBERD_USER
-JAKARTA_HOME JAVA_APP_PATH
-JAVA_APP_TARGETS JAVA_BINPREFIX
-JAVA_CLASSPATH JAVA_HOME
-JAVA_LD_LIBRARY_PATH JAVA_NAME
-JAVA_UNLIMIT JAVA_WRAPPERS
-JPEG_ACCEPTED JPEG_DEFAULT
-KERBEROS KERMIT_SUID_UUCP
-KJS_USE_PCRE KNEWS_DOMAIN_FILE
-KNEWS_DOMAIN_NAME KRB5_ACCEPTED
-KRB5_DEFAULT LANGUAGES
-LAPACK_LIBS LATEX2HTML_ICONPATH
-LDCONFIG_ADD_CMD LDCONFIG_REMOVE_CMD
-LEAFNODE_DATA_DIR LEAFNODE_GROUP
-LEAFNODE_USER LIBDVDCSS_HOMEPAGE
-LIBDVDCSS_MASTER_SITES LIBRSVG_TYPE
-LIBTOOL LIBTOOLIZE_PLIST
-LIBTOOL_M4_OVERRIDE LIBUSB_TYPE
-LICENSE LINKER_RPATH_FLAG
-LINK_RPATH_FLAG LINUX_BASE_NODEPS
-LINUX_BASE_PREFERRED LINUX_BASE_REQUIRED
-LINUX_LOCALES LOCALBASE
-LOCALBASE_LOCKTYPE LOCALPATCHES
-LOVE_DATA LOVE_GAME
-LOVE_VERSION LP64PLATFORMS
-MACHINE_PLATFORM MAILAGENT_DOMAIN
-MAILAGENT_EMAIL MAILAGENT_FQDN
-MAILAGENT_ORGANIZATION MAJORDOMO_HOMEDIR
-MAJOR_OS_VERSION MAKEINFO_ARGS
-MAKE_DIRS MAKE_DIRS_PERMS
-MAKE_ENV MAKE_FILE
-MAKE_FLAGS MAKE_JOBS
-MAKE_JOBS_SAFE MAKE_PROGRAM
-MANINSTALL MANZ
-MASTER_SITES MASTER_SITE_BACKUP
-MASTER_SITE_LOCAL MASTER_SITE_MOZILLA
-MASTER_SITE_OVERRIDE MASTER_SITE_PERL_CPAN
-MASTER_SORT MASTER_SORT_RANDOM
-MASTER_SORT_REGEX MECAB_CHARSET
-MEDIATOMB_GROUP MEDIATOMB_USER
-MIPSPROBASE MIREDO_GROUP
-MIREDO_USER MISSING_FEATURES
-MKDIR MLDONKEY_GROUP
-MLDONKEY_HOME MLDONKEY_USER
-MONOTONE_GROUP MONOTONE_USER
-MOTIFBASE MOTIF_TYPE
-MOTIF_TYPE_DEFAULT MPI_TYPE
-MSGFMT_STRIP_MSGCTXT MSGFMT_STRIP_MSGID_PLURAL
-MTOOLS_ENABLE_FLOPPYD MUST
-MV MYSQL_CHARSET
-MYSQL_DATADIR MYSQL_EXTRA_CHARSET
-MYSQL_GROUP MYSQL_PKGSRCDIR
-MYSQL_USER MYSQL_VERSIONS_ACCEPTED
-MYSQL_VERSION_DEFAULT NAGIOSCMD_GROUP
-NAGIOSDIR NAGIOS_GROUP
-NAGIOS_USER NATIVE_APPEND_ABI
-NATIVE_APPEND_ELF NATIVE_EXEC_FMT
-NATIVE_MACHINE_PLATFORM NATIVE_OBJECT_FMT
-NBPAX_PROGRAM_PREFIX NETBSD_LOGIN_NAME
-NMH_EDITOR NMH_MTA
-NMH_PAGER NOLOGIN
-NOTE NOT_FOR_PLATFORM
-NOT_PAX_ASLR_SAFE NOT_PAX_MPROTECT_SAFE
-NO_BUILD NO_CHECKSUM
-NO_CONFIGURE NO_SKIP
-NS_PREFERRED NULLMAILER_GROUP
-NULLMAILER_USER OASIS
-OASIS_BUILD_ARGS OBJHOSTNAME
-OBJMACHINE OCAML_FINDLIB_DIRS
-OCAML_FINDLIB_REGISTER OCAML_FINDLIB_REGISTER_VERBOSE
-OCAML_SITELIBDIR OCAML_TOPKG_DOCDIR
-OCAML_USE_DUNE OCAML_USE_FINDLIB
-OCAML_USE_JBUILDER OCAML_USE_OASIS
-OCAML_USE_OASIS_DYNRUN OCAML_USE_OPAM
-OCAML_USE_OPT_COMPILER OCAML_USE_TOPKG
-OMF ONLY_FOR_COMPILER
-ONLY_FOR_PLATFORM OPENSSH_CHROOT
-OPENSSH_GROUP OPENSSH_USER
-OPSYS OPSYS_EMULDIR
-OSS_TYPE OSX
-OSX_TOLERATE_SDK_SKEW OS_HAVE_ALSA
-OS_HAVE_RCD OS_VARIANT
-OS_VERSION OTF_FONTS_DIR
-OVERRIDE_DIRDEPTH OVERRIDE_GEMSPEC
-OVERRIDE_GNU_CONFIG_SCRIPTS OVERRIDE_ROCKSPEC
-OWN_DIRS OWN_DIRS_PERMS
-P4GROUP P4PORT
-P4ROOT P4USER
-PACKAGES PALMOS_DEFAULT_SDK
-PAMBASE PAM_DEFAULT
-PAPERSIZE PASSIVE_FETCH
-PATCHDIR PATCHFILES
-PATCH_ARGS PATCH_DEBUG
-PATCH_DIST_ARGS PATCH_DIST_CAT
-PATCH_DIST_STRIP PATCH_FUZZ_FACTOR
-PATCH_STRIP PATH
-PCCBASE PEAR
-PEAR_CHANNEL PEAR_CHANNEL_ALIAS
-PEAR_CHANNEL_VERSION PEAR_CMD
-PEAR_LIB PEAR_PACKAGE_XML
-PERL5 PERL5_CONFIGURE
-PERL5_CONFIGURE_DIRS PERL5_LDFLAGS
-PERL5_LICENSE PERL5_MODULE_TYPE
-PERL5_PACKLIST PERL5_PACKLIST_DIR
-PERL5_PERLBASE PERL5_SITEBASE
-PERL5_USE_PACKLIST PERL5_VENDORBASE
-PFCTL PFVAR_H
-PF_VERSION PGGROUP
-PGHOME PGPKGSRCDIR
-PGSQL_TYPE PGSQL_VERSIONS_ACCEPTED
-PGSQL_VERSION_DEFAULT PGUSER
-PG_LIB_EXT PHP
-PHPCOMMON_MK PHPPKGSRCDIR
-PHP_BASE_VERS PHP_CHECK_INSTALLED
-PHP_EXTENSION_DIR PHP_INITIAL_TEENY
-PHP_PKG_PREFIX PHP_VERSION
-PHP_VERSIONS_ACCEPTED PHP_VERSIONS_INCOMPATIBLE
-PHP_VERSION_DEFAULT PHP_VERSION_REQD
-PILRC_USE_GTK PKGCONFIG_BASE
-PKGCONFIG_FILE PKGCONFIG_OVERRIDE
-PKGCONFIG_OVERRIDE_STAGE PKGDIR
-PKGGNUDIR PKGINFODIR
-PKGLOCALEDIR PKGMANDIR
-PKGNAME PKGNAME_REQD
-PKGPATH PKGREVISION
-PKGSRC_BLAS_TYPES PKGSRC_CHANGES
-PKGSRC_COMPILER PKGSRC_KEEP_BIN_PKGS
-PKGSRC_LOCKTYPE PKGSRC_MAKE_ENV
-PKGSRC_MESSAGE_RECIPIENTS PKGSRC_MKPIE
-PKGSRC_MKREPRO PKGSRC_RUN_TEST
-PKGSRC_SETENV PKGSRC_SLEEPSECS
-PKGSRC_TODO PKGSRC_USE_CTF
-PKGSRC_USE_FORTIFY PKGSRC_USE_RELRO
-PKGSRC_USE_SSP PKGSRC_USE_STACK_CHECK
-PKGTASKS_DATAFILE PKGTOOLS_ARGS
-PKGTOOLS_ENV PKG_ALTERNATIVES
-PKG_APACHE PKG_APACHE_ACCEPTED
-PKG_APACHE_DEFAULT PKG_BEST_EXISTS
-PKG_BUILD_OPTIONS PKG_COMPRESSION
-PKG_CONFIG PKG_CONFIG_PERMS
-PKG_CREATE_USERGROUP PKG_DB_TMPDIR
-PKG_DEBUG_LEVEL PKG_DEFAULT_OPTIONS
-PKG_DESTDIR_SUPPORT PKG_DEVELOPER
-PKG_DISABLED_OPTIONS PKG_FATAL_ERRORS
-PKG_FC PKG_FILELIST_CMD
-PKG_GECOS PKG_GID
-PKG_GROUPS PKG_GROUPS_VARS
-PKG_HOME PKG_INIT_SCRIPTS
-PKG_JAVA_HOME PKG_JVM
-PKG_JVMS_ACCEPTED PKG_JVM_DEFAULT
-PKG_LEGACY_OPTIONS PKG_LIBTOOL
-PKG_OPTIONS PKG_OPTIONS_DEPRECATED_WARNINGS
-PKG_OPTIONS_LEGACY_OPTS PKG_OPTIONS_LEGACY_VARS
-PKG_OPTIONS_NONEMPTY_SETS PKG_OPTIONS_OPTIONAL_GROUPS
-PKG_OPTIONS_REQUIRED_GROUPS PKG_OPTIONS_VAR
-PKG_PHP PKG_PHP_MAJOR_VERS
-PKG_PHP_VERSION PKG_RCD_SCRIPTS
-PKG_REFCOUNT_DBDIR PKG_REGISTER_SHELLS
-PKG_RESUME_TRANSFERS PKG_SHELL
-PKG_SUGGESTED_OPTIONS PKG_SUPPORTED_OPTIONS
-PKG_SYSCONFBASE PKG_SYSCONFBASEDIR
-PKG_SYSCONFDIR PKG_SYSCONFDIR_PERMS
-PKG_SYSCONFSUBDIR PKG_SYSCONFVAR
-PKG_TOOLS_BIN PKG_UID
-PKG_UPDATE_FONTS_DB PKG_USERS
-PKG_USERS_VARS PKG_VERBOSE
-PLIST PLIST_AWK
-PLIST_AWK_ENV PLIST_SRC
-PLIST_SUBST PLIST_TYPE
-PLIST_VARS POPTOP_USE_MPPE
-POSSIBLE_GFORTRAN_VERSION POST_FETCH_HOOK
-PREFER PREFER_NATIVE
-PREFER_NATIVE_PTHREADS PREFER_PKGSRC
-PREFIX PREPEND_PATH
-PRE_ROOT_CMD PRIVILEGED_STAGES
-PS PTHREAD_AUTO_VARS
-PTHREAD_CFLAGS PTHREAD_LDFLAGS
-PTHREAD_LIBS PTHREAD_OPTS
-PTHREAD_TYPE PVM_SSH
-PYPKGPREFIX PYTHON_FOR_BUILD_ONLY
-PYTHON_SELF_CONFLICT PYTHON_VERSIONED_DEPENDENCIES
-PYTHON_VERSIONS_ACCEPTED PYTHON_VERSIONS_INCOMPATIBLE
-PYTHON_VERSION_DEFAULT PYTHON_VERSION_REQD
-PYVERSSUFFIX PY_NO_EGG
-QMAILDIR QMAIL_ALIAS_USER
-QMAIL_DAEMON_USER QMAIL_LOG_USER
-QMAIL_NOFILES_GROUP QMAIL_PASSWD_USER
-QMAIL_QMAIL_GROUP QMAIL_QUEUE_DIR
-QMAIL_QUEUE_EXTRA QMAIL_QUEUE_USER
-QMAIL_REMOTE_USER QMAIL_ROOT_USER
-QMAIL_SEND_USER QPOPPER_FAC
-QPOPPER_SPOOL_DIR QPOPPER_USER
-RAKE_NAME RASMOL_DEPTH
-RCD_DIR RCD_ORDER
-RCD_SCRIPTS RCD_SCRIPTS_DIR
-RCD_SCRIPTS_EXAMPLEDIR RCD_SCRIPTS_MODE
-RCD_SCRIPTS_SHELL RCD_SCRIPT_SRC
-RCD_SUBR RDOC
-READLINE_DEFAULT READLINE_TYPE
-REAL_ROOT_GROUP REAL_ROOT_USER
-RECURSIVE_MAKE RELAY_CTRL_DIR
-REPLACE_AWK REPLACE_BASH
-REPLACE_CSH REPLACE_KSH
-REPLACE_PERL REPLACE_PERL6
-REPLACE_PHP REPLACE_PYTHON
-REPLACE_RUBY REPLACE_RUBY_DIRS
-REPLACE_RUBY_PAT REPLACE_SH
-REPLACE_TEXLUA REQD_DIRS
-REQD_DIRS_PERMS REQD_FILES
-REQD_FILES_MODE REQD_FILES_PERMS
-RESOLV_AUTO_VARS RESOLV_LDFLAGS
-RESOLV_LIBS RM
-ROCKSPEC_NAME ROCKSPEC_SPECFILE
-ROOT_CMD ROOT_GROUP
-ROOT_USER RPCGEN
-RPM RPM2PKG_PLIST
-RPM2PKG_PREFIX RPM2PKG_STAGE
-RPM2PKG_STRIP RPM2PKG_SUBPREFIX
-RPMFILES RPMIGNOREPATH
-RPM_DB_PREFIX RSSH_CVS_PATH
-RSSH_RDIST_PATH RSSH_RSYNC_PATH
-RSSH_SCP_PATH RSSH_SFTP_SERVER_PATH
-RUBY RUBYGEM
-RUBYGEM_NAME RUBYGEM_OPTIONS
-RUBY_ABI_VERSION RUBY_ARCH
-RUBY_ARCHINC RUBY_ARCHLIB
-RUBY_BASE RUBY_BASERIDIR
-RUBY_BUILD_DOCUMENT RUBY_DLEXT
-RUBY_DOC RUBY_DYNAMIC_DIRS
-RUBY_EG RUBY_ENCODING_ARG
-RUBY_EXTCONF RUBY_EXTCONF_CHECK
-RUBY_EXTCONF_DEBUG RUBY_EXTCONF_MAKEFILE
-RUBY_GEM_BASE RUBY_INC
-RUBY_LIB RUBY_LIB_BASE
-RUBY_NAME RUBY_NOVERSION
-RUBY_PKGPREFIX RUBY_RAILS
-RUBY_RAILS51_VERSION RUBY_RAILS52_VERSION
-RUBY_RAILS60_VERSION RUBY_RAILS_ACCEPTED
-RUBY_RAILS_DEFAULT RUBY_RAILS_REQD
-RUBY_RAILS_STRICT_DEP RUBY_RIDIR
-RUBY_SETUP RUBY_SHLIB
-RUBY_SHLIBALIAS RUBY_SHLIBVER
-RUBY_SIMPLE_INSTALL RUBY_SITEARCHLIB
-RUBY_SITELIB RUBY_SITELIB_BASE
-RUBY_SITERIDIR RUBY_SLEXT
-RUBY_SRCDIR RUBY_STATICLIB
-RUBY_SUFFIX RUBY_SYSRIDIR
-RUBY_USE_PTHREAD RUBY_VENDORARCHLIB
-RUBY_VENDORLIB RUBY_VENDORLIB_BASE
-RUBY_VER RUBY_VERSION
-RUBY_VERSIONS_ACCEPTED RUBY_VERSIONS_INCOMPATIBLE
-RUBY_VERSION_DEFAULT RUBY_VERSION_REQD
-RUBY_VER_DIR RUN
-RUN_LDCONFIG SAWFISH_THEMES
-SCO SCREWS_GROUP
-SCREWS_USER SCRIPTS_ENV
-SCROLLKEEPER_DATADIR SCROLLKEEPER_REBUILDDB
-SCROLLKEEPER_UPDATEDB SDIST_PAWD
-SERIAL_DEVICES SETGIDGAME
-SETGID_GAMES_PERMS SETUID_ROOT_PERMS
-SH SHLIB
-SHORTNAME SIGN_PACKAGES
-SILC_CLIENT_WITH_PERL SITE_SPECIFIC_PKGS
-SKIP_DEPENDS SMF_INSTANCES
-SMF_MANIFEST SMF_METHODS
-SMF_METHOD_SHELL SMF_METHOD_SRC
-SMF_NAME SMF_PREFIX
-SMF_SRCDIR SNIPROXY_GROUP
-SNIPROXY_USER SOURCE_BUFFSIZE
-SPECIAL_PERMS SPECIFIC_PKGS
-SSH_SUID SSP_SUPPORTED
-SSYNC_PAWD STEP_MSG
-STRIP STRIP_DBG
-STRIP_DEBUG STRIP_DEBUG_SUPPORTED
-STRIP_FILES_SKIP SU
-SUBDIR SUBST
-SUBST_CLASSES SUBST_FILES
-SUBST_FILTER_CMD SUBST_MESSAGE
-SUBST_NOOP_OK SUBST_SED
-SUBST_SHOW_DIFF SUBST_SKIP_TEXT_CHECK
-SUBST_STAGE SUBST_VARS
-SUNWSPROBASE SUSE_PREFER
-SU_CMD SVN_EXTRACTDIR
-SVN_REPO SVN_REPOSITORIES
-SVN_REVISION TERMCAP_TYPE
-TERMINFO_DEFAULT TERMINFO_TYPE
-TEST TEST_DEPENDS
-TEST_DIRS TEST_ENV
-TEST_ENV_SHELL TEST_MAKE_CMD
-TEST_MAKE_FLAGS TEST_TARGET
-TEXLIVE_IGNORE_PATTERNS TEXLIVE_REV
-TEXLIVE_UNVERSIONED TEXMFSITE
-TEX_FORMATS TEX_HYPHEN_DAT
-TEX_HYPHEN_DEF TEX_TEXMF_DIRS
-THTTPD_LOG_FACILITY TO
-TOOLS_ALIASES TOOLS_ALWAYS_WRAP
-TOOLS_ARGS TOOLS_BROKEN
-TOOLS_CMD TOOLS_CREATE
-TOOLS_DIR TOOLS_FAIL
-TOOLS_GNU_MISSING TOOLS_LDCONFIG
-TOOLS_NOOP TOOLS_PATH
-TOOLS_SCRIPT TOOL_DEPENDS
-TTF_FONTDIR TTF_FONTS_DIR
-TYPE UAC_REQD_EXECS
-UCSPI_SSL_GROUP UCSPI_SSL_USER
-UNLIMIT_RESOURCES UNPRIVILEGED
-UNPRIVILEGED_GROUP UNPRIVILEGED_GROUPS
-UNPRIVILEGED_USER UNWRAP_FILES
-UNWRAP_PATTERNS UPDATE_GEMSPEC
-UPDATE_TARGET URI
-USERGROUP_PHASE USERPPP_GROUP
-USER_SPECIFIC_PKGS USE_ABI_DEPENDS
-USE_APR USE_BSD_MAKEFILE
-USE_BUILTIN USE_CROSS_COMPILE
-USE_CURSES USE_CWRAPPERS
-USE_DB185 USE_FEATURES
-USE_GAMESGROUP USE_GCC_RUNTIME
-USE_IMAKE USE_JAVA
-USE_JAVA2 USE_LANGUAGES
-USE_LIBTOOL USE_NATIVE_GCC
-USE_NETBSD_REPO USE_PKGSRC_GCC
-USE_PKGSRC_GCC_RUNTIME USE_PKGTASKS
-USE_PKG_ADMIN_DIGEST USE_RUBY_EXTCONF
-USE_RUBY_INSTALL USE_RUBY_SETUP
-USE_RUBY_SETUP_PKG USE_TOOLS
-UUCP_GROUP UUCP_USER
-VARBASE VARNAME
-VIM_EXTRA_OPTS WARNING_MSG
-WCALC_CGIDIR WCALC_CGIPATH
-WCALC_HTMLDIR WCALC_HTMLPATH
-WDM_MANAGERS WRAPPER_REORDER_CMDS
-WRKDIR WRKDIR_BASENAME
-WRKDIR_LOCKTYPE WRKLOG
-WRKOBJDIR WRKSRC
-X10_PORT X11
-X11BASE X11_PKGSRCDIR
-X11_TYPE X509_CERTIFICATE
-X509_KEY XAW_TYPE
-XLOCK_DEFAULT_MODE XMKMF_FLAGS
-XXX XXXX
-YES ZSH_STATIC
-__stdc__ _vargroups
-accept acquire-localbase-lock
-acquire-lock add
-administrator alloca
-alternatives aslr
-asprintf atlas
-autoconf automake
-autoreconf awk
-bash big-endian
-bin-install bind
-binpkg-list blas
-bootstrap-depends broken
-broken_on_platform bsd
-bsd.prog.mk build
-build-env buildlink-directories
-buildlink-oss-soundcard-h c
-c++ ccache
-cce cdefs
-ceil changes
-changes-entry changes-entry-noupdate
-check check-clean
-check-files check-files-clean
-check-vulnerable checksum
-checksum-phase clean
-clean-depends cleandir
-commit commit-changes-entry
-compact compiler
-conf config.guess
-config.sub configuration
-configure configure-env
-configure-help configure_args
-connect cos
-cputime create-usergroup
-csh ctf
-cvs debug
-declaration declare
-defined depend
-dependencies depends
-depends-checksum depends-fetch
-deps describe
-destdir disable
-distclean distinfo
-dl dlopen
-do-build do-buildlink
-do-clean do-configure
-do-configure-post-hook do-extract
-do-fetch do-install
-emul emul-distinfo
-emul-fetch emulation
-emulator enable
-endian endif
-enomem err
-errx etc
-exp extract-rpm
-fabs feature
-features fetch
-fetch-list follows
-forbids form
-format fortify
-fortify_source fossil
-friend fts
-fts_close fts_open
-fts_read fts_set
-gcc gethostbyaddr
-gethostbyname gethostbyname2
-getopt_long getprogname
-getservbyname getservbyport
-getservent gettext
-git github
-gitlab glob
-gnu gnu_configure_strict
-go go-deps
-golang guess-license
-hashbang heimdal
-help hg
-imake increment
-inet_aton interp
-interpreter intl
-iso kerberos
-krb krb5
-ksh lapack
-latex libintl_bindtextdomain
-libintl_gettext libintl_textdomain
-libnbcompat libs
-libtool licence
-license lintl
-little-endian lock
-locking lvalue
-make makesum
-memory mercurial
-meta meta-package
-meta_package mit-krb5
-mk.conf mkl
-mount mprotect
-mremap nb
-nbcompat obstack
-obstack_ptr_grow occurs
-only openblas
-options options.mk
-order override
-override-intltool override-message-intltool
-package parallel
-path pax
-paxctl pbulk-index
-pc perl
-perl5 perms
-php pkg-build-options
-pkg-config pkg_build_options
-platform plist
-post-extract post-fetch
-post-wrapper pre-build-checks-hook
-pre-configure pre-configure-checks-hook
-pre-extract pre-fetch
-print-go-deps print-plist
-print-summary-data privileged-install-hook
-pypi python
-readme-all recv
-recvfrom regcomp
-release-localbase-lock release-lock
-relro rename
-reorder replace
-replace_interpreter reproducible
-resolv root
-ruby send
-sendfile sendto
-setenv setgid
-setprogname setuid
-sh show
-show-all show-build-defs
-show-depends show-deps
-show-distfiles show-downlevel
-show-subdir-var show-tools
-show-var show-vars
-snprintf socket
-ssp st_mode
-stage-install strcasestr
-strict strip
-strndup strnlen
-strsep subst
-substitutions subversion
-sun sunpro
-sunwspro svn
-symlink test
-test-env tex
-texlive tmp
-tool tools
-tools-libtool-m4-override type
-ulimit undefined
-undo-replace unlimit
-unprivileged unprivileged-install-hook
-unstripped update
-upload upload-distfiles
-use_tools user
-utimes vasprintf
-verbose vsnprintf
-warn warning
-warnings warnx
-wattr_off wattr_on
-work wrapper
-wrkdir
+#! -lintl
+64bit ABI
+ACCEPTABLE_LICENSES ACROREAD_FONTPATH
+ADDITIONAL AFAIK
+AIX ALLOW_VULNERABLE_PACKAGES
+ALL_ENV ALSA_PC
+ALTERNATIVES_SRC AMANDA_TMP
+AMANDA_USER AMANDA_VAR
+APACHE_GROUP APACHE_MODULE_NAME
+APACHE_MODULE_SRC APACHE_MODULE_SRCDIR
+APACHE_PKG_PREFIX APACHE_SUEXEC_CONFIGURE_ARGS
+APACHE_SUEXEC_DOCROOT APACHE_USER
+APPEND_ABI APPEND_ELF
+ARLA_CACHE AUDIT_PACKAGES_FLAGS
+AUTOCONF_REQD AUTOMAKE_OVERRIDE
+AUTOMAKE_REQD AUTO_MKDIRS
+BDB185_DEFAULT BDBBASE
+BDB_ACCEPTED BDB_DEFAULT
+BDB_LIBS BDB_TYPE
+BIND_DIR BIND_GROUP
+BIND_USER BINPKG_SITES
+BIN_INSTALL_FLAGS BISON_PKGDATADIR
+BLAS_ACCEPTED BLAS_LIBS
+BLAS_TYPE BOOTSTRAP_DEPENDS
+BOOTSTRAP_SETUPTOOLS BROKEN
+BROKEN_EXCEPT_ON_PLATFORM BROKEN_ON_PLATFORM
+BSDSRCDIR BSDXSRCDIR
+BSD_MAKE_ENV BUILDLINK_AUTO_DIRS
+BUILDLINK_AUTO_VARS BUILDLINK_CFLAGS
+BUILDLINK_CONTENTS_FILTER BUILDLINK_CPPFLAGS
+BUILDLINK_DEPMETHOD BUILDLINK_FILES
+BUILDLINK_FILES_CMD BUILDLINK_FNAME_TRANSFORM
+BUILDLINK_LDFLAGS BUILDLINK_LIBS
+BUILDLINK_OPSYS_SUPPORT_PTHREAD BUILDLINK_PKGNAME
+BUILDLINK_PREFIX BUILDLINK_RPATHDIRS
+BUILDLINK_TREE BUILD_DEFS
+BUILD_DEFS_EFFECTS BUILD_DEPENDS
+BUILD_DIRS BUILD_ENV_SHELL
+BUILD_MAKE_CMD BUILD_MAKE_FLAGS
+BUILD_TARGET BUILTIN_FIND_FILES
+BUILTIN_FIND_FILES_VAR BUILTIN_FIND_GREP
+BUILTIN_FIND_HEADERS BUILTIN_FIND_HEADERS_VAR
+BUILTIN_PKG BUILTIN_TEST_CURSES_DEFINES
+BUILTIN_TEST_CURSES_FUNCS BUILTIN_VERSION_SCRIPT
+BUILTIN_X11_TYPE BUILTIN_X11_VERSION
+CACTI_GROUP CACTI_USER
+CANNA_GROUP CANNA_USER
+CAT CCACHE_BASE
+CCACHE_DIR CCACHE_LOGFILE
+CC_VERSION CC_VERSION_STRING
+CDRECORD_CONF CDROM_PKG_URL_DIR
+CDROM_PKG_URL_HOST CHECKOUT_DATE
+CHECK_COMPILER CHECK_FAKEHOME
+CHECK_FILES CHECK_FILES_SKIP
+CHECK_FILES_STRICT CHECK_HEADERS
+CHECK_HEADERS_SKIP CHECK_INTERPRETER
+CHECK_INTERPRETER_SKIP CHECK_PERMS
+CHECK_PERMS_AUTOFIX CHECK_PERMS_SKIP
+CHECK_PORTABILITY CHECK_PORTABILITY_EXPERIMENTAL
+CHECK_PORTABILITY_SKIP CHECK_RELRO
+CHECK_RELRO_SKIP CHECK_RELRO_SUPPORTED
+CHECK_SHLIBS CHECK_SHLIBS_BLACKLIST
+CHECK_SHLIBS_SKIP CHECK_SHLIBS_SUPPORTED
+CHECK_SSP CHECK_SSP_SKIP
+CHECK_SSP_SUPPORTED CHECK_STRIPPED
+CHECK_STRIPPED_SKIP CHECK_WRKREF
+CHECK_WRKREF_EXTRA_DIRS CHECK_WRKREF_SKIP
+CLAMAV_DBDIR CLAMAV_GROUP
+CLAMAV_USER CLANGBASE
+CLEANDEPENDS CMAKE_DEPENDENCIES_REWRITE
+CMAKE_INSTALL_PREFIX CMAKE_MODULE_PATH_OVERRIDE
+CMAKE_PKGSRC_BUILD_FLAGS CMAKE_PREFIX_PATH
+CMAKE_USE_GNU_INSTALL_DIRS COMMON_LISP_DOCFILES
+COMMON_LISP_EXAMPLES COMMON_LISP_EXTRAFILES
+COMMON_LISP_PACKAGES COMMON_LISP_SYSTEM
+COMPILER_RPATH_FLAG COMPILER_USE_SYMLINKS
+CONFIGURE_ARGS CONFIGURE_DIRS
+CONFIGURE_ENV CONFIGURE_ENV_SHELL
+CONFIGURE_HAS_INFODIR CONFIGURE_HAS_MANDIR
+CONFIGURE_SCRIPT CONFIG_SHELL
+CONFIG_SHELL_FLAGS CONF_FILES
+CONF_FILES_MODE CONF_FILES_PERMS
+CONSERVER_DEFAULTHOST CONSERVER_DEFAULTPORT
+CP CPP
+CPP_PRECOMP_FLAGS CREATE_WRKDIR_SYMLINK
+CROSSBASE CTFCONVERT
+CTF_FILES_SKIP CTF_SUPPORTED
+CTYPE CUPS_GROUP
+CUPS_SYSTEM_GROUPS CUPS_USER
+CURSES_DEFAULT CURSES_TYPE
+CVS_EXTRACTDIR CVS_MODULE
+CVS_PROJECT CVS_REPOSITORIES
+CVS_ROOT CVS_ROOT_GNU
+CVS_ROOT_NONGNU CVS_ROOT_SOURCEFORGE
+CVS_TAG CXX
+CYRUS_GROUP CYRUS_IDLE
+CYRUS_USER DAEMONTOOLS_GROUP
+DAEMONTOOLS_LOG_USER DBUS_GROUP
+DBUS_USER DEFANG_GROUP
+DEFANG_USER DEFAULT_ACCEPTABLE_LICENSES
+DEFAULT_DISTFILES DEFAULT_IRC_SERVER
+DEFAULT_SERIAL_DEVICE DEF_UMASK
+DEINSTALLDEPENDS DEINSTALL_SRC
+DEINSTALL_TEMPLATES DELAYED_ERROR_MSG
+DELAYED_WARNING_MSG DEPENDS
+DEPENDS_TARGET DEPENDS_TYPE
+DESTDIR DESTDIR_VARNAME
+DIALER_GROUP DIGEST_REQD
+DISTDIR DISTFILES
+DISTINFO_FILE DISTNAME
+DIST_PATH DIST_SUBDIR
+DJBDNS_AXFR_USER DJBDNS_CACHE_USER
+DJBDNS_DJBDNS_GROUP DJBDNS_LOG_USER
+DJBDNS_RBL_USER DJBDNS_TINY_USER
+DLOPEN_REQUIRE_PTHREADS DL_AUTO_VARS
+DL_CFLAGS DL_LDFLAGS
+DL_LIBS DNS
+DOWNLOADED_DISTFILE DT_LAYOUT
+DYNAMIC_SITES_CMD DYNAMIC_SITES_SCRIPT
+ECHO ECHO_N
+ELK_GUI EMACS_TYPE
+EMULDIR EMULSUBDIR
+EMULSUBDIRSLASH EMUL_ARCH
+EMUL_DISTRO EMUL_EXEC_FMT
+EMUL_IS_NATIVE EMUL_MODULES
+EMUL_OPSYS EMUL_PKG_FMT
+EMUL_PLATFORM EMUL_PLATFORMS
+EMUL_PREFER EMUL_REQD
+EMUL_TYPE ERROR_MSG
+EXIM_GROUP EXIM_USER
+EXPORT_SYMBOLS_LDFLAGS EXTRACTOR
+EXTRACT_CMD EXTRACT_CMD_DEFAULT
+EXTRACT_DIR EXTRACT_ELEMENTS
+EXTRACT_ENV EXTRACT_ONLY
+EXTRACT_OPTS EXTRACT_SUFX
+EXTRACT_USING FAIL
+FAILOVER_FETCH FAIL_MSG
+FAKE_NCURSES FAM
+FAM_ACCEPTED FAM_DEFAULT
+FAM_SERVER FCPATH
+FEATURE_CPPFLAGS FEATURE_LDFLAGS
+FEATURE_LIBS FETCH_AFTER_ARGS
+FETCH_BEFORE_ARGS FETCH_CMD
+FETCH_OUTPUT_ARGS FETCH_PROXY
+FETCH_RESUME_ARGS FETCH_USING
+FILES_SUBST FILES_SUBST_SED
+FIX_SYSTEM_HEADERS FLUXBOX_USE_GNOME
+FLUXBOX_USE_KDE FLUXBOX_USE_XFT
+FLUXBOX_USE_XINERAMA FONTDIR
+FONTS_DIRS FONTS_VERBOSE
+FOO_HACKS_MK FOSSIL_EXTRACTDIR
+FOSSIL_REPO FOSSIL_REPOSITORIES
+FOSSIL_VERSION FOX_USE_XUNICODE
+FREEWNN_GROUP FREEWNN_USER
+FTP_PKG_URL_DIR FTP_PKG_URL_HOST
+GAMEDATAMODE GAMEDATA_PERMS
+GAMEDIRMODE GAMEDIR_PERMS
+GAMEGRP GAMEMODE
+GAMEOWN GAMES_GROUP
+GAMES_USER GCC
+GCCBASE GCC_REQD
+GCC_VERSION_SUFFIX GEM_BUILD
+GEM_CLEANBUILD GEM_CLEANBUILD_EXTENSIONS
+GEM_DOCDIR GEM_EXTSDIR
+GEM_HOME GEM_KEEPBUILD
+GEM_LIBDIR GEM_NAME
+GEM_PATH GEM_SPECFILE
+GENERATE_PLIST GHOSTSCRIPT_REQD
+GITHUB_PROJECT GITHUB_RELEASE
+GITHUB_TAG GITHUB_TYPE
+GITLAB_PROJECT GITLAB_TAG
+GITLAB_TYPE GIT_BRANCH
+GIT_ENV GIT_EXTRACTDIR
+GIT_REPO GIT_REPOSITORIES
+GIT_REVISION GIT_TAG
+GNU GNU_CONFIGURE
+GNU_CONFIGURE_INFODIR GNU_CONFIGURE_MANDIR
+GNU_CONFIGURE_QUIET GNU_CONFIGURE_STRICT
+GODEP_REDIRECTS GO_BUILD_PATTERN
+GO_DEPS GO_DIST_BASE
+GO_MODULE_FILES GO_SRCPATH
+GO_VERSION_DEFAULT GROUP_SPECIFIC_PKGS
+GRUB_NETWORK_CARDS GRUB_PRESET_COMMAND
+GRUB_SCAN_ARGS GZIP
+HASKELL_COMPILER HASKELL_ENABLE_HADDOCK_DOCUMENTATION
+HASKELL_ENABLE_LIBRARY_PROFILING HASKELL_ENABLE_SHARED_LIBRARY
+HASKELL_OPTIMIZATION_LEVEL HAS_CONFIGURE
+HEADER_TEMPLATES HG_REPO
+HG_REPOSITORIES HG_TAG
+HOST_PKGTOOLS_ARGS HOST_SPECIFIC_PKGS
+HOWL_GROUP HOWL_USER
+ICCBASE ICECAST_CHROOTDIR
+ICON_THEMES IDOBASE
+IGNORE_CCACHE IGNORE_INFO_DIRS
+IGNORE_INTERACTIVE_FETCH IMAKE
+IMAKEOPTS IMAKE_MAKE
+IMAKE_MANINSTALL IMAP_UW_CCLIENT_MBOX_FMT
+IMDICTDIR INCOMPAT_CURSES
+INFO_DIR INFO_FILES
+INFO_FILES_VERBOSE INFO_MSG
+INIT_SYSTEM INN_DATA_DIR
+INN_GROUP INN_USER
+INSTALLATION_DIRS INSTALLATION_DIRS_FROM_PLIST
+INSTALL_ENV INSTALL_SH_OVERRIDE
+INSTALL_SRC INSTALL_TEMPLATES
+INSTALL_UNSTRIPPED IRCD_HYBRID_IRC_GROUP
+IRCD_HYBRID_IRC_USER IRCD_HYBRID_MAXCONN
+IRCD_HYBRID_NICLEN IRCD_HYBRID_SYSLOG_EVENTS
+IRCD_HYBRID_SYSLOG_FACILITY IRCD_HYBRID_TOPICLEN
+IRIX IRRD_USE_PGP
+JABBERD_GROUP JABBERD_LOGDIR
+JABBERD_PIDDIR JABBERD_SPOOLDIR
+JABBERD_USER JAKARTA_HOME
+JAVA_APP_PATH JAVA_APP_TARGETS
+JAVA_BINPREFIX JAVA_CLASSPATH
+JAVA_HOME JAVA_LD_LIBRARY_PATH
+JAVA_NAME JAVA_UNLIMIT
+JAVA_WRAPPERS JPEG_ACCEPTED
+JPEG_DEFAULT KERBEROS
+KERMIT_SUID_UUCP KJS_USE_PCRE
+KNEWS_DOMAIN_FILE KNEWS_DOMAIN_NAME
+KRB5_ACCEPTED KRB5_DEFAULT
+LANGUAGES LAPACK_LIBS
+LATEX2HTML_ICONPATH LDCONFIG_ADD_CMD
+LDCONFIG_REMOVE_CMD LEAFNODE_DATA_DIR
+LEAFNODE_GROUP LEAFNODE_USER
+LIBDVDCSS_HOMEPAGE LIBDVDCSS_MASTER_SITES
+LIBRSVG_TYPE LIBTOOL
+LIBTOOLIZE_PLIST LIBTOOL_M4_OVERRIDE
+LIBUSB_TYPE LICENSE
+LINKER_RPATH_FLAG LINK_RPATH_FLAG
+LINUX_BASE_NODEPS LINUX_BASE_PREFERRED
+LINUX_BASE_REQUIRED LINUX_LOCALES
+LOCALBASE LOCALBASE_LOCKTYPE
+LOCALPATCHES LOVE_DATA
+LOVE_GAME LOVE_VERSION
+LP64PLATFORMS MACHINE_PLATFORM
+MAILAGENT_DOMAIN MAILAGENT_EMAIL
+MAILAGENT_FQDN MAILAGENT_ORGANIZATION
+MAJORDOMO_HOMEDIR MAJOR_OS_VERSION
+MAKEINFO_ARGS MAKE_DIRS
+MAKE_DIRS_PERMS MAKE_ENV
+MAKE_FILE MAKE_FLAGS
+MAKE_JOBS MAKE_JOBS_SAFE
+MAKE_PROGRAM MANINSTALL
+MANZ MASTER_SITES
+MASTER_SITE_BACKUP MASTER_SITE_LOCAL
+MASTER_SITE_MOZILLA MASTER_SITE_OVERRIDE
+MASTER_SITE_PERL_CPAN MASTER_SORT
+MASTER_SORT_RANDOM MASTER_SORT_REGEX
+MECAB_CHARSET MEDIATOMB_GROUP
+MEDIATOMB_USER MIPSPROBASE
+MIREDO_GROUP MIREDO_USER
+MISSING_FEATURES MKDIR
+MLDONKEY_GROUP MLDONKEY_HOME
+MLDONKEY_USER MONOTONE_GROUP
+MONOTONE_USER MOTIFBASE
+MOTIF_TYPE MOTIF_TYPE_DEFAULT
+MPI_TYPE MSGFMT_STRIP_MSGCTXT
+MSGFMT_STRIP_MSGID_PLURAL MTOOLS_ENABLE_FLOPPYD
+MUST MV
+MYSQL_CHARSET MYSQL_DATADIR
+MYSQL_EXTRA_CHARSET MYSQL_GROUP
+MYSQL_PKGSRCDIR MYSQL_USER
+MYSQL_VERSIONS_ACCEPTED MYSQL_VERSION_DEFAULT
+NAGIOSCMD_GROUP NAGIOSDIR
+NAGIOS_GROUP NAGIOS_USER
+NATIVE_APPEND_ABI NATIVE_APPEND_ELF
+NATIVE_EXEC_FMT NATIVE_MACHINE_PLATFORM
+NATIVE_OBJECT_FMT NBPAX_PROGRAM_PREFIX
+NETBSD_LOGIN_NAME NMH_EDITOR
+NMH_MTA NMH_PAGER
+NOLOGIN NOTE
+NOT_FOR_PLATFORM NOT_PAX_ASLR_SAFE
+NOT_PAX_MPROTECT_SAFE NO_BUILD
+NO_CHECKSUM NO_CONFIGURE
+NO_SKIP NS_PREFERRED
+NULLMAILER_GROUP NULLMAILER_USER
+OASIS OASIS_BUILD_ARGS
+OBJHOSTNAME OBJMACHINE
+OCAML_FINDLIB_DIRS OCAML_FINDLIB_REGISTER
+OCAML_FINDLIB_REGISTER_VERBOSE OCAML_SITELIBDIR
+OCAML_TOPKG_DOCDIR OCAML_USE_DUNE
+OCAML_USE_FINDLIB OCAML_USE_JBUILDER
+OCAML_USE_OASIS OCAML_USE_OASIS_DYNRUN
+OCAML_USE_OPAM OCAML_USE_OPT_COMPILER
+OCAML_USE_TOPKG OMF
+ONLY_FOR_COMPILER ONLY_FOR_PLATFORM
+OPENSSH_CHROOT OPENSSH_GROUP
+OPENSSH_USER OPSYS
+OPSYS_EMULDIR OSS_TYPE
+OSX OSX_TOLERATE_SDK_SKEW
+OS_HAVE_ALSA OS_HAVE_RCD
+OS_VARIANT OS_VERSION
+OTF_FONTS_DIR OVERRIDE_DIRDEPTH
+OVERRIDE_GEMSPEC OVERRIDE_GNU_CONFIG_SCRIPTS
+OVERRIDE_ROCKSPEC OWN_DIRS
+OWN_DIRS_PERMS P4GROUP
+P4PORT P4ROOT
+P4USER PACKAGES
+PALMOS_DEFAULT_SDK PAMBASE
+PAM_DEFAULT PAPERSIZE
+PASSIVE_FETCH PATCHDIR
+PATCHFILES PATCH_ARGS
+PATCH_DEBUG PATCH_DIST_ARGS
+PATCH_DIST_CAT PATCH_DIST_STRIP
+PATCH_FUZZ_FACTOR PATCH_STRIP
+PATH PCCBASE
+PEAR PEAR_CHANNEL
+PEAR_CHANNEL_ALIAS PEAR_CHANNEL_VERSION
+PEAR_CMD PEAR_LIB
+PEAR_PACKAGE_XML PERL5
+PERL5_CONFIGURE PERL5_CONFIGURE_DIRS
+PERL5_LDFLAGS PERL5_LICENSE
+PERL5_MODULE_TYPE PERL5_PACKLIST
+PERL5_PACKLIST_DIR PERL5_PERLBASE
+PERL5_SITEBASE PERL5_USE_PACKLIST
+PERL5_VENDORBASE PFCTL
+PFVAR_H PF_VERSION
+PGGROUP PGHOME
+PGPKGSRCDIR PGSQL_TYPE
+PGSQL_VERSIONS_ACCEPTED PGSQL_VERSION_DEFAULT
+PGUSER PG_LIB_EXT
+PHP PHPCOMMON_MK
+PHPPKGSRCDIR PHP_BASE_VERS
+PHP_CHECK_INSTALLED PHP_EXTENSION_DIR
+PHP_INITIAL_TEENY PHP_PKG_PREFIX
+PHP_VERSION PHP_VERSIONS_ACCEPTED
+PHP_VERSIONS_INCOMPATIBLE PHP_VERSION_DEFAULT
+PHP_VERSION_REQD PILRC_USE_GTK
+PKGCONFIG_BASE PKGCONFIG_FILE
+PKGCONFIG_OVERRIDE PKGCONFIG_OVERRIDE_STAGE
+PKGDIR PKGGNUDIR
+PKGINFODIR PKGLOCALEDIR
+PKGMANDIR PKGNAME
+PKGNAME_REQD PKGPATH
+PKGREVISION PKGSRC_BLAS_TYPES
+PKGSRC_CHANGES PKGSRC_COMPILER
+PKGSRC_KEEP_BIN_PKGS PKGSRC_LOCKTYPE
+PKGSRC_MAKE_ENV PKGSRC_MESSAGE_RECIPIENTS
+PKGSRC_MKPIE PKGSRC_MKREPRO
+PKGSRC_RUN_TEST PKGSRC_SETENV
+PKGSRC_SLEEPSECS PKGSRC_TODO
+PKGSRC_USE_CTF PKGSRC_USE_FORTIFY
+PKGSRC_USE_RELRO PKGSRC_USE_SSP
+PKGSRC_USE_STACK_CHECK PKGTASKS_DATAFILE
+PKGTOOLS_ARGS PKGTOOLS_ENV
+PKG_ALTERNATIVES PKG_APACHE
+PKG_APACHE_ACCEPTED PKG_APACHE_DEFAULT
+PKG_BEST_EXISTS PKG_BUILD_OPTIONS
+PKG_COMPRESSION PKG_CONFIG
+PKG_CONFIG_PERMS PKG_CREATE_USERGROUP
+PKG_DB_TMPDIR PKG_DEBUG_LEVEL
+PKG_DEFAULT_OPTIONS PKG_DESTDIR_SUPPORT
+PKG_DEVELOPER PKG_DISABLED_OPTIONS
+PKG_FATAL_ERRORS PKG_FC
+PKG_FILELIST_CMD PKG_GECOS
+PKG_GID PKG_GROUPS
+PKG_GROUPS_VARS PKG_HOME
+PKG_INIT_SCRIPTS PKG_JAVA_HOME
+PKG_JVM PKG_JVMS_ACCEPTED
+PKG_JVM_DEFAULT PKG_LEGACY_OPTIONS
+PKG_LIBTOOL PKG_OPTIONS
+PKG_OPTIONS_DEPRECATED_WARNINGS PKG_OPTIONS_LEGACY_OPTS
+PKG_OPTIONS_LEGACY_VARS PKG_OPTIONS_NONEMPTY_SETS
+PKG_OPTIONS_OPTIONAL_GROUPS PKG_OPTIONS_REQUIRED_GROUPS
+PKG_OPTIONS_VAR PKG_PHP
+PKG_PHP_MAJOR_VERS PKG_PHP_VERSION
+PKG_RCD_SCRIPTS PKG_REFCOUNT_DBDIR
+PKG_REGISTER_SHELLS PKG_RESUME_TRANSFERS
+PKG_SHELL PKG_SUGGESTED_OPTIONS
+PKG_SUPPORTED_OPTIONS PKG_SYSCONFBASE
+PKG_SYSCONFBASEDIR PKG_SYSCONFDIR
+PKG_SYSCONFDIR_PERMS PKG_SYSCONFSUBDIR
+PKG_SYSCONFVAR PKG_TOOLS_BIN
+PKG_UID PKG_UPDATE_FONTS_DB
+PKG_USERS PKG_USERS_VARS
+PKG_VERBOSE PLIST
+PLIST_AWK PLIST_AWK_ENV
+PLIST_SRC PLIST_SUBST
+PLIST_TYPE PLIST_VARS
+POPTOP_USE_MPPE POSSIBLE_GFORTRAN_VERSION
+POST_FETCH_HOOK PREFER
+PREFER_NATIVE PREFER_NATIVE_PTHREADS
+PREFER_PKGSRC PREFIX
+PREPEND_PATH PRE_ROOT_CMD
+PRIVILEGED_STAGES PS
+PTHREAD_AUTO_VARS PTHREAD_CFLAGS
+PTHREAD_LDFLAGS PTHREAD_LIBS
+PTHREAD_OPTS PTHREAD_TYPE
+PVM_SSH PYPKGPREFIX
+PYTHON_FOR_BUILD_ONLY PYTHON_SELF_CONFLICT
+PYTHON_VERSIONED_DEPENDENCIES PYTHON_VERSIONS_ACCEPTED
+PYTHON_VERSIONS_INCOMPATIBLE PYTHON_VERSION_DEFAULT
+PYTHON_VERSION_REQD PYVERSSUFFIX
+PY_NO_EGG QMAILDIR
+QMAIL_ALIAS_USER QMAIL_DAEMON_USER
+QMAIL_LOG_USER QMAIL_NOFILES_GROUP
+QMAIL_PASSWD_USER QMAIL_QMAIL_GROUP
+QMAIL_QUEUE_DIR QMAIL_QUEUE_EXTRA
+QMAIL_QUEUE_USER QMAIL_REMOTE_USER
+QMAIL_ROOT_USER QMAIL_SEND_USER
+QPOPPER_FAC QPOPPER_SPOOL_DIR
+QPOPPER_USER RAKE_NAME
+RASMOL_DEPTH RCD_DIR
+RCD_ORDER RCD_SCRIPTS
+RCD_SCRIPTS_DIR RCD_SCRIPTS_EXAMPLEDIR
+RCD_SCRIPTS_MODE RCD_SCRIPTS_SHELL
+RCD_SCRIPT_SRC RCD_SUBR
+RDOC READLINE_DEFAULT
+READLINE_TYPE REAL_ROOT_GROUP
+REAL_ROOT_USER RECURSIVE_MAKE
+RELAY_CTRL_DIR REPLACE_AWK
+REPLACE_BASH REPLACE_CSH
+REPLACE_KSH REPLACE_PERL
+REPLACE_PERL6 REPLACE_PHP
+REPLACE_PYTHON REPLACE_RUBY
+REPLACE_RUBY_DIRS REPLACE_RUBY_PAT
+REPLACE_SH REPLACE_TEXLUA
+REQD_DIRS REQD_DIRS_PERMS
+REQD_FILES REQD_FILES_MODE
+REQD_FILES_PERMS RESOLV_AUTO_VARS
+RESOLV_LDFLAGS RESOLV_LIBS
+RM ROCKSPEC_NAME
+ROCKSPEC_SPECFILE ROOT_CMD
+ROOT_GROUP ROOT_USER
+RPCGEN RPM
+RPM2PKG_PLIST RPM2PKG_PREFIX
+RPM2PKG_STAGE RPM2PKG_STRIP
+RPM2PKG_SUBPREFIX RPMFILES
+RPMIGNOREPATH RPM_DB_PREFIX
+RSSH_CVS_PATH RSSH_RDIST_PATH
+RSSH_RSYNC_PATH RSSH_SCP_PATH
+RSSH_SFTP_SERVER_PATH RUBY
+RUBYGEM RUBYGEM_NAME
+RUBYGEM_OPTIONS RUBY_ABI_VERSION
+RUBY_ARCH RUBY_ARCHINC
+RUBY_ARCHLIB RUBY_BASE
+RUBY_BASERIDIR RUBY_BUILD_DOCUMENT
+RUBY_DLEXT RUBY_DOC
+RUBY_DYNAMIC_DIRS RUBY_EG
+RUBY_ENCODING_ARG RUBY_EXTCONF
+RUBY_EXTCONF_CHECK RUBY_EXTCONF_DEBUG
+RUBY_EXTCONF_MAKEFILE RUBY_GEM_BASE
+RUBY_INC RUBY_LIB
+RUBY_LIB_BASE RUBY_NAME
+RUBY_NOVERSION RUBY_PKGPREFIX
+RUBY_RAILS RUBY_RAILS51_VERSION
+RUBY_RAILS52_VERSION RUBY_RAILS60_VERSION
+RUBY_RAILS_ACCEPTED RUBY_RAILS_DEFAULT
+RUBY_RAILS_REQD RUBY_RAILS_STRICT_DEP
+RUBY_RIDIR RUBY_SETUP
+RUBY_SHLIB RUBY_SHLIBALIAS
+RUBY_SHLIBVER RUBY_SIMPLE_INSTALL
+RUBY_SITEARCHLIB RUBY_SITELIB
+RUBY_SITELIB_BASE RUBY_SITERIDIR
+RUBY_SLEXT RUBY_SRCDIR
+RUBY_STATICLIB RUBY_SUFFIX
+RUBY_SYSRIDIR RUBY_USE_PTHREAD
+RUBY_VENDORARCHLIB RUBY_VENDORLIB
+RUBY_VENDORLIB_BASE RUBY_VER
+RUBY_VERSION RUBY_VERSIONS_ACCEPTED
+RUBY_VERSIONS_INCOMPATIBLE RUBY_VERSION_DEFAULT
+RUBY_VERSION_REQD RUBY_VER_DIR
+RUN RUN_LDCONFIG
+SAWFISH_THEMES SCO
+SCREWS_GROUP SCREWS_USER
+SCRIPTS_ENV SCROLLKEEPER_DATADIR
+SCROLLKEEPER_REBUILDDB SCROLLKEEPER_UPDATEDB
+SDIST_PAWD SERIAL_DEVICES
+SETGIDGAME SETGID_GAMES_PERMS
+SETUID_ROOT_PERMS SH
+SHLIB SHORTNAME
+SIGN_PACKAGES SILC_CLIENT_WITH_PERL
+SITE_SPECIFIC_PKGS SKIP_DEPENDS
+SMF_INSTANCES SMF_MANIFEST
+SMF_METHODS SMF_METHOD_SHELL
+SMF_METHOD_SRC SMF_NAME
+SMF_PREFIX SMF_SRCDIR
+SNIPROXY_GROUP SNIPROXY_USER
+SOURCE_BUFFSIZE SPECIAL_PERMS
+SPECIFIC_PKGS SSH_SUID
+SSP_SUPPORTED SSYNC_PAWD
+STEP_MSG STRIP
+STRIP_DBG STRIP_DEBUG
+STRIP_DEBUG_SUPPORTED STRIP_FILES_SKIP
+SU SUBDIR
+SUBST SUBST_CLASSES
+SUBST_FILES SUBST_FILTER_CMD
+SUBST_MESSAGE SUBST_NOOP_OK
+SUBST_SED SUBST_SHOW_DIFF
+SUBST_SKIP_TEXT_CHECK SUBST_STAGE
+SUBST_VARS SUNWSPROBASE
+SUSE_PREFER SU_CMD
+SVN_EXTRACTDIR SVN_REPO
+SVN_REPOSITORIES SVN_REVISION
+TERMCAP_TYPE TERMINFO_DEFAULT
+TERMINFO_TYPE TEST
+TEST_DEPENDS TEST_DIRS
+TEST_ENV TEST_ENV_SHELL
+TEST_MAKE_CMD TEST_MAKE_FLAGS
+TEST_TARGET TEXLIVE_IGNORE_PATTERNS
+TEXLIVE_REV TEXLIVE_UNVERSIONED
+TEXMFSITE TEX_FORMATS
+TEX_HYPHEN_DAT TEX_HYPHEN_DEF
+TEX_TEXMF_DIRS THTTPD_LOG_FACILITY
+TO TOOLS_ALIASES
+TOOLS_ALWAYS_WRAP TOOLS_ARGS
+TOOLS_BROKEN TOOLS_CMD
+TOOLS_CREATE TOOLS_DIR
+TOOLS_FAIL TOOLS_GNU_MISSING
+TOOLS_LDCONFIG TOOLS_NOOP
+TOOLS_PATH TOOLS_SCRIPT
+TOOL_DEPENDS TTF_FONTDIR
+TTF_FONTS_DIR TYPE
+UAC_REQD_EXECS UCSPI_SSL_GROUP
+UCSPI_SSL_USER UNLIMIT_RESOURCES
+UNPRIVILEGED UNPRIVILEGED_GROUP
+UNPRIVILEGED_GROUPS UNPRIVILEGED_USER
+UNWRAP_FILES UNWRAP_PATTERNS
+UPDATE_GEMSPEC UPDATE_TARGET
+URI USERGROUP_PHASE
+USERPPP_GROUP USER_SPECIFIC_PKGS
+USE_ABI_DEPENDS USE_APR
+USE_BSD_MAKEFILE USE_BUILTIN
+USE_CROSS_COMPILE USE_CURSES
+USE_CWRAPPERS USE_DB185
+USE_FEATURES USE_GAMESGROUP
+USE_GCC_RUNTIME USE_IMAKE
+USE_JAVA USE_JAVA2
+USE_LANGUAGES USE_LIBTOOL
+USE_NATIVE_GCC USE_NETBSD_REPO
+USE_PKGSRC_GCC USE_PKGSRC_GCC_RUNTIME
+USE_PKGTASKS USE_PKG_ADMIN_DIGEST
+USE_RUBY_EXTCONF USE_RUBY_INSTALL
+USE_RUBY_SETUP USE_RUBY_SETUP_PKG
+USE_TOOLS UUCP_GROUP
+UUCP_USER VARBASE
+VARNAME VIM_EXTRA_OPTS
+WARNING_MSG WCALC_CGIDIR
+WCALC_CGIPATH WCALC_HTMLDIR
+WCALC_HTMLPATH WDM_MANAGERS
+WRAPPER_REORDER_CMDS WRKDIR
+WRKDIR_BASENAME WRKDIR_LOCKTYPE
+WRKLOG WRKOBJDIR
+WRKSRC X10_PORT
+X11 X11BASE
+X11_PKGSRCDIR X11_TYPE
+X509_CERTIFICATE X509_KEY
+XAW_TYPE XLOCK_DEFAULT_MODE
+XMKMF_FLAGS XXX
+XXXX YES
+ZSH_STATIC __stdc__
+_vargroups accept
+acquire-localbase-lock acquire-lock
+add administrator
+alloca alternatives
+aslr asprintf
+atlas autoconf
+automake autoreconf
+awk bash
+big-endian bin-install
+bind binpkg-list
+blas bootstrap-depends
+broken broken_on_platform
+bsd bsd.prog.mk
+build build-env
+buildlink-directories buildlink-oss-soundcard-h
+c c++
+ccache cce
+cdefs ceil
+changes changes-entry
+changes-entry-noupdate check
+check-clean check-files
+check-files-clean check-vulnerable
+checksum checksum-phase
+clean clean-depends
+cleandir commit
+commit-changes-entry compact
+compiler conf
+config.guess config.sub
+configuration configure
+configure-env configure-help
+configure_args connect
+cos cputime
+create-usergroup csh
+ctf cvs
+debug declaration
+declare defined
+depend dependencies
+depends depends-checksum
+depends-fetch deps
+describe destdir
+disable distclean
+distinfo dl
+dlopen do-build
+do-buildlink do-clean
+do-configure do-configure-post-hook
+do-extract do-fetch
+do-install emul
+emul-distinfo emul-fetch
+emulation emulator
+enable endian
+endif enomem
+err errx
+etc exp
+extract-rpm fabs
+feature features
+fetch fetch-list
+follows forbids
+form format
+fortify fortify_source
+fossil friend
+fts fts_close
+fts_open fts_read
+fts_set gcc
+gethostbyaddr gethostbyname
+gethostbyname2 getopt_long
+getprogname getservbyname
+getservbyport getservent
+gettext git
+github gitlab
+glob gnu
+gnu_configure_strict go
+go-deps golang
+guess-license hashbang
+heimdal help
+hg imake
+increment inet_aton
+interp interpreter
+intl iso
+kerberos krb
+krb5 ksh
+lapack latex
+libintl_bindtextdomain libintl_gettext
+libintl_textdomain libnbcompat
+libs libtool
+licence license
+lintl little-endian
+lock locking
+lvalue make
+makesum memory
+mercurial meta
+meta-package meta_package
+mit-krb5 mk.conf
+mkl mount
+mprotect mremap
+nb nbcompat
+obstack obstack_ptr_grow
+occurs only
+openblas options
+options.mk order
+override override-intltool
+override-message-intltool package
+parallel path
+pax paxctl
+pbulk-index pc
+perl perl5
+perms php
+pkg-build-options pkg-config
+pkg_build_options platform
+plist post-extract
+post-fetch post-wrapper
+pre-build-checks-hook pre-configure
+pre-configure-checks-hook pre-extract
+pre-fetch print-go-deps
+print-plist print-summary-data
+privileged-install-hook pypi
+python readme-all
+recv recvfrom
+regcomp release-localbase-lock
+release-lock relro
+rename reorder
+replace replace_interpreter
+reproducible resolv
+root ruby
+send sendfile
+sendto setenv
+setgid setprogname
+setuid sh
+show show-all
+show-build-defs show-depends
+show-deps show-distfiles
+show-downlevel show-subdir-var
+show-tools show-var
+show-vars snprintf
+socket ssp
+st_mode stage-install
+strcasestr strict
+strip strndup
+strnlen strsep
+subst substitutions
+subversion sun
+sunpro sunwspro
+svn symlink
+test test-env
+tex texlive
+tmp tool
+tools tools-libtool-m4-override
+type ulimit
+undefined undo-replace
+unlimit unprivileged
+unprivileged-install-hook unstripped
+update upload
+upload-distfiles use_tools
+user utimes
+vasprintf verbose
+vsnprintf warn
+warning warnings
+warnx wattr_off
+wattr_on work
+wrapper wrkdir
Appendix E. Editing guidelines for the pkgsrc guide
Home |
Main Index |
Thread Index |
Old Index