pkgsrc-Changes archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
CVS commit: pkgsrc/archivers/xz
Module Name: pkgsrc
Committed By: adam
Date: Sun May 3 10:10:44 UTC 2020
Modified Files:
pkgsrc/archivers/xz: Makefile PLIST distinfo
Log Message:
xz: updated to 5.2.5
5.2.5:
* liblzma:
- Fixed several C99/C11 conformance bugs. Now the code is clean
under gcc/clang -fsanitize=undefined. Some of these changes
might have a negative effect on performance with old GCC
versions or compilers other than GCC and Clang. The configure
option --enable-unsafe-type-punning can be used to (mostly)
restore the old behavior but it shouldn't normally be used.
- Improved API documentation of lzma_properties_decode().
- Added a very minor encoder speed optimization.
* xz:
- Fixed a crash in "xz -dcfv not_an_xz_file". All four options
were required to trigger it. The crash occurred in the
progress indicator code when xz was in passthru mode where
xz works like "cat".
- Fixed an integer overflow with 32-bit off_t. It could happen
when decompressing a file that has a long run of zero bytes
which xz would try to write as a sparse file. Since the build
system enables large file support by default, off_t is
normally 64-bit even on 32-bit systems.
- Fixes for --flush-timeout:
* Fix semi-busy-waiting.
* Avoid unneeded flushes when no new input has arrived
since the previous flush was completed.
- Added a special case for 32-bit xz: If --memlimit-compress is
used to specify a limit that exceeds 4020 MiB, the limit will
be set to 4020 MiB. The values "0" and "max" aren't affected
by this and neither is decompression. This hack can be
helpful when a 32-bit xz has access to 4 GiB address space
but the specified memlimit exceeds 4 GiB. This can happen
e.g. with some scripts.
- Capsicum sandbox is now enabled by default where available
(FreeBSD >= 10). The sandbox debug messages (xz -vv) were
removed since they seemed to be more annoying than useful.
- DOS build now requires DJGPP 2.05 instead of 2.04beta.
A workaround for a locale problem with DJGPP 2.05 was added.
* xzgrep and other scripts:
- Added a configure option --enable-path-for-scripts=PREFIX.
It is disabled by default except on Solaris where the default
is /usr/xpg4/bin. See INSTALL for details.
- Added a workaround for a POSIX shell detection problem on
Solaris.
* Build systems:
- Added preliminary build instructions for z/OS. See INSTALL
section 1.2.9.
- Experimental CMake support was added. It should work to build
static liblzma on a few operating systems. It may or may not
work to build shared liblzma. On some platforms it can build
xz and xzdec too but those are only for testing. See the
comment in the beginning of CMakeLists.txt for details.
- Visual Studio project files were updated.
WindowsTargetPlatformVersion was removed from VS2017 files
and set to "10.0" in the added VS2019 files. In the future
the VS project files will be removed when CMake support is
good enough.
- New #defines in config.h: HAVE___BUILTIN_ASSUME_ALIGNED,
HAVE___BUILTIN_BSWAPXX, and TUKLIB_USE_UNSAFE_TYPE_PUNNING.
- autogen.sh has a new optional dependency on po4a and a new
option --no-po4a to skip that step. This matters only if one
wants to remake the build files. po4a is used to update the
translated man pages but as long as the man pages haven't
been modified, there's nothing to update and one can use
--no-po4a to avoid the dependency on po4a.
* Translations:
- XZ Utils translations are now handled by the Translation
Project: https://translationproject.org/domain/xz.html
- All man pages are now included in German too.
- New xz translations: Brazilian Portuguese, Finnish,
Hungarian, Chinese (simplified), Chinese (traditional),
and Danish (partial translation)
- Updated xz translations: French, German, Italian, and Polish
- Unfortunately a few new xz translations weren't included due
to technical problems like too long lines in --help output or
misaligned column headings in tables. In the future, many of
these strings will be split and e.g. the table column
alignment will be handled in software. This should make the
strings easier to translate.
To generate a diff of this commit:
cvs rdiff -u -r1.28 -r1.29 pkgsrc/archivers/xz/Makefile
cvs rdiff -u -r1.9 -r1.10 pkgsrc/archivers/xz/PLIST
cvs rdiff -u -r1.18 -r1.19 pkgsrc/archivers/xz/distinfo
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: pkgsrc/archivers/xz/Makefile
diff -u pkgsrc/archivers/xz/Makefile:1.28 pkgsrc/archivers/xz/Makefile:1.29
--- pkgsrc/archivers/xz/Makefile:1.28 Sun Sep 2 21:03:22 2018
+++ pkgsrc/archivers/xz/Makefile Sun May 3 10:10:43 2020
@@ -1,6 +1,6 @@
-# $NetBSD: Makefile,v 1.28 2018/09/02 21:03:22 maya Exp $
+# $NetBSD: Makefile,v 1.29 2020/05/03 10:10:43 adam Exp $
-DISTNAME= xz-5.2.4
+DISTNAME= xz-5.2.5
CATEGORIES= archivers
MASTER_SITES= https://tukaani.org/xz/
EXTRACT_SUFX= .tar.bz2
Index: pkgsrc/archivers/xz/PLIST
diff -u pkgsrc/archivers/xz/PLIST:1.9 pkgsrc/archivers/xz/PLIST:1.10
--- pkgsrc/archivers/xz/PLIST:1.9 Tue Dec 30 06:37:35 2014
+++ pkgsrc/archivers/xz/PLIST Sun May 3 10:10:44 2020
@@ -1,4 +1,4 @@
-@comment $NetBSD: PLIST,v 1.9 2014/12/30 06:37:35 adam Exp $
+@comment $NetBSD: PLIST,v 1.10 2020/05/03 10:10:44 adam Exp $
bin/lzcat
bin/lzcmp
bin/lzdiff
@@ -39,6 +39,28 @@ include/lzma/version.h
include/lzma/vli.h
lib/liblzma.la
lib/pkgconfig/liblzma.pc
+${PLIST.nls}man/de/man1/lzcat.1
+${PLIST.nls}man/de/man1/lzcmp.1
+${PLIST.nls}man/de/man1/lzdiff.1
+${PLIST.nls}man/de/man1/lzegrep.1
+${PLIST.nls}man/de/man1/lzfgrep.1
+${PLIST.nls}man/de/man1/lzgrep.1
+${PLIST.nls}man/de/man1/lzless.1
+${PLIST.nls}man/de/man1/lzma.1
+${PLIST.nls}man/de/man1/lzmadec.1
+${PLIST.nls}man/de/man1/lzmore.1
+${PLIST.nls}man/de/man1/unlzma.1
+${PLIST.nls}man/de/man1/unxz.1
+${PLIST.nls}man/de/man1/xz.1
+${PLIST.nls}man/de/man1/xzcat.1
+${PLIST.nls}man/de/man1/xzcmp.1
+${PLIST.nls}man/de/man1/xzdec.1
+${PLIST.nls}man/de/man1/xzdiff.1
+${PLIST.nls}man/de/man1/xzegrep.1
+${PLIST.nls}man/de/man1/xzfgrep.1
+${PLIST.nls}man/de/man1/xzgrep.1
+${PLIST.nls}man/de/man1/xzless.1
+${PLIST.nls}man/de/man1/xzmore.1
man/man1/lzcat.1
man/man1/lzcmp.1
man/man1/lzdiff.1
@@ -82,8 +104,14 @@ share/doc/xz/history.txt
share/doc/xz/lzma-file-format.txt
share/doc/xz/xz-file-format.txt
${PLIST.nls}share/locale/cs/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/da/LC_MESSAGES/xz.mo
${PLIST.nls}share/locale/de/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/fi/LC_MESSAGES/xz.mo
${PLIST.nls}share/locale/fr/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/hu/LC_MESSAGES/xz.mo
${PLIST.nls}share/locale/it/LC_MESSAGES/xz.mo
${PLIST.nls}share/locale/pl/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/pt_BR/LC_MESSAGES/xz.mo
${PLIST.nls}share/locale/vi/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/zh_CN/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/zh_TW/LC_MESSAGES/xz.mo
Index: pkgsrc/archivers/xz/distinfo
diff -u pkgsrc/archivers/xz/distinfo:1.18 pkgsrc/archivers/xz/distinfo:1.19
--- pkgsrc/archivers/xz/distinfo:1.18 Tue Jun 5 22:28:38 2018
+++ pkgsrc/archivers/xz/distinfo Sun May 3 10:10:44 2020
@@ -1,7 +1,7 @@
-$NetBSD: distinfo,v 1.18 2018/06/05 22:28:38 adam Exp $
+$NetBSD: distinfo,v 1.19 2020/05/03 10:10:44 adam Exp $
-SHA1 (xz-5.2.4.tar.bz2) = 50ad451279404fb5206e23c7b1ba9c4aa858c994
-RMD160 (xz-5.2.4.tar.bz2) = 0c5a6ffd47d657fed0c7192f413422e503b79c69
-SHA512 (xz-5.2.4.tar.bz2) = 25a548c34a304ba51cdaa63813df0fa4ac2f3cf0ec6dc2d181ec5b62fe586090cd0f1c866ee7ba19e9b264ecabf9ca9f2f1dda7f95313546da4152f3cfaa7e6e
-Size (xz-5.2.4.tar.bz2) = 1287922 bytes
+SHA1 (xz-5.2.5.tar.bz2) = 19f83fb33dc51df87169864decd4b3de75dee1df
+RMD160 (xz-5.2.5.tar.bz2) = e8c9343d2a1d4aafda92f0b2d94962f16b46688d
+SHA512 (xz-5.2.5.tar.bz2) = 89e25ddf72427ee9608cbf2e9dbc24d592cb67a27f44ccf7d47e4d9405774444e9cfcd02ac4bcb92064860371ed31d3cfbecd5fe063f296ead607714c0a664a1
+Size (xz-5.2.5.tar.bz2) = 1473322 bytes
SHA1 (patch-src_xz_Makefile.in) = b9360c7b2b34159028fb8b84339aa2faf3922287
Home |
Main Index |
Thread Index |
Old Index