CVS commit: pkgsrc/graphics/libraw

["Nia Alarie" <nia%netbsd.org@localhost>]

Module Name:    pkgsrc
Committed By:   nia
Date:           Wed Jul 10 20:27:59 UTC 2019

Modified Files:
        pkgsrc/graphics/libraw: Makefile buildlink3.mk distinfo

Log Message:
libraw: Update to 0.19.3

2019-07-02  Alex Tutubalin <lexa%lexa.ru@localhost>
 * Several fixes inspired by OSS-Fuzz
 * LibRaw 0.19.3
 * Note: ABI slightly changed, new variable added at end of class LibRaw
   Generally, all old code should run w/o recompile, but you're warned...

2018-12-24  Alex Tutubalin <lexa%lexa.ru@localhost>
 * Fixed possible buffer overrun at Fuji makernotes parser
 * Fixed possible write to NULL pointer at raw2image/raw2image_ex calls.
   Details:
    a) Three different CVE numbers was assigned for single problem:
      CVE-2018-20363, CVE-2018-20364, CVE-2018-20365
    b) The POCs exploits inconsistency in Sinar-4Shot files handling.
     LibRaw 0.19 does not support this files format, so it is not
     subject of exactly same problem
    c) However, additional checks for bayer raw data presence are
     backported from LibRaw-master (development) branch.

 * LibRaw 0.19.2

2018-11-22  Alex Tutubalin <lexa%lexa.ru@localhost>
 * Finally: got Sinar 4shot sample, works fine now
 * OpenMP critical sections for malloc/free; extra #ifdefs removed; bin/dcraw_dist could be built again using Makefile.devel
 * additional checks in parse_phase_one()
 * more checks on file offsets/tag len in parse_minolta
 * more checks in parse_ciff
 * Mempool check reworked
 * Old Leaf (16bit/3color/TIFF) support
 * Fix cameraWB->autoWB fallback
 * Polaroid x530 channel swap; get metadata pointer for Foveon files
 * Fixed Secunia Advisory SA86384
   - possible infinite loop in unpacked_load_raw()
   - possible infinite loop in parse_rollei()
   - possible infinite loop in parse_sinar_ia()
  Credits: Laurent Delosieres, Secunia Research at Flexera

 * LibRaw 0.19.1-Release

2018-06-28  Alex Tutubalin <lexa%lexa.ru@localhost>
 * changed wrong fix for Canon D30 white balance
 * fixed possible stack overrun while reading zero-sized strings
 * fixed possible integer overflow
 * LibRaw 0.19.0-Release

2018-06-11  Alex Tutubalin <lexa%lexa.ru@localhost>
 * Sony uncompressed/untiled DNGs: do not set bits-per-sample to 14 bit
 * Do not change tiff_bps for DNG files
 * Another possible stack overflow in kodak radc reader
 * Secunia Advisory SA83507, credits Kasper Leigh Haabb,
   Secunia Research at Flexera"
   - parse_qt: possible integer overflow
   - reject broken/crafted NOKIARAW files
 * LibRaw 0.19-Beta6

2018-05-10  Alex Tutubalin <lexa%lexa.ru@localhost>
 * Put rogue printf's behind #ifdef DCRAW_VERBOSE
 * Exceptions was not caught in x3f_new_from_file resulting in x3f handle leak
 * packed_load_raw(): EOF check on each row
 * define LIBRAW_USE_CALLOC_INSTEAD_OF_MALLOC to use ::calloc instead of
   ::malloc in LibRaw_mem_mgr malloc calls;
   Note: realloc is not changed, so only partial fix
 * Fixed possible div by zero in EOS D30 WB data parse
 * U-suffix for filter-var manipulation consts
 * restored static specifier for utf2char() lost in previous bugfix
 * Fixed stack overrun in kodak_radc_load_raw
 * Secunia Advisory SA83050: possible infinite loop in parse_minolta()
 * LibRaw 0.19-Beta5

2018-05-03  Alex Tutubalin <lexa%lexa.ru@localhost>
 * CVE-2018-10529 fixed: out of bounds read in X3F parser
 * CVE-2018-10528 fixed: possible stack overrun in X3F parser
 * LibRaw 0.19-Beta4

2018-04-24 Alex Tutubalin <lexa%lexa.ru@localhost>
 * LibRaw 0.19-Beta3
 * fixed lot of bugs reported by ImageMagic/oss-fuzz
 * fixed several bugs reported by Secunia team (adv 81800,
   Credit: Laurent Delosieres, Secunia Research at Flexera)

2018-03-22 Alex Tutubalin <lexa%lexa.ru@localhost>
 * LibRaw 0.19-Beta2
 * Better handling of broken JPEG thumbnails
 * Panasonic GH5S/G9-hires decoder, thanks to Alexey Danilchenko
   Note: ABI has changed due to this patch, so shlib version increased
 * Fujifilm X-A5/A20 metadata parsing fix
 * New error code LIBRAW_TOO_BIG: image data size excess LIBRAW_MAX_ALLOC_MB
 * winsock2 included before windows.h to make MinGW happy

2018-02-23 Alex Tutubalin <lexa%lexa.ru@localhost>

 * LibRaw 0.19-Beta1

 * 84 cameras added compared to 0.18 (1014 total):
    Apple
        iPhone 8(*), iPhone 8 plus, iPhone X
    BlackMagic
        URSA Mini 4k, URSA Mini 4.6k, URSA Mini Pro 4.6k
    Canon CHDK hack
         PowerShot A410, A540, D10, ELPH 130 IS, ELPH 160 IS, SD750,
            SX100 IS,SX130 IS, SX160 IS, SX510 HS, SX10 IS, IXUS 900Ti
    Canon
        PowerShot G1 X Mark III, G9 X Mark II, EOS 6D Mark II, EOS 77D,
        EOS 200D, EOS 800D, EOS M6, EOS M100
    Casio EX-ZR4100/5100
    DJI
        Phantom4 Pro/Pro+, Zenmuse X5, Zenmuse X5R
    FujiFilm
        S6500fd, GFX 50S, X100f, X-A3, X-A5, X-A10, X-A20, X-E3, X-H1, X-T20
    GITUP GIT2P
    Hasselblad
        H6D-100c, A6D-100c
    Huawei
        P9 (EVA-L09/AL00), Honor6a, Honor9, Mate10 (BLA-L29)
    Leica
        CL, M10, TL2
    LG
        V20 (F800K), VS995,
    Nikon
        D850, D5600, D7500, Coolpix B700
    Olympus
        E-PL9, E-M10 Mark III, TG-5
    OnePlus
        One, A3303, A5000
    Panasonic
        DMC-FZ45, DMC-FZ72, DC-FZ80/82, DC-G9 (std. res mode only), DC-GF10/GF90,
        DC-GH5, DC-GX9, DC-GX800/850/GF9, DMC-LX1, DC-ZS70 (DC-TZ90/91/92, DC-T93),
        DC-TZ100/101/ZS100, DC-TZ200/ZS200
    PARROT
        Bebop 2, Bebop Drone
    Pentax KP
    PhaseOne IQ3 100MP Trichromatic
    Samsung
        Galaxy Nexus, Galaxy S3, S6 (SM-G920F), S7, S7 Edge, S8 (SM-G950U),
    Sony
        A7R III, A9, DSC-RX0, DSC-RX10IV
    Yi M1
    YUNEEC
        CGO3, CGO3P
    Xiaoyi YIAC3 (YI 4k)

  Note(*): for mobile phones with DNG format recording, only really tested cameras
  are added to supported camera list. Really LibRaw should support any correct DNG.

 * No more built-in support for LibRaw demosaic packs (GPL2/GPL3).
   We're unable to support this (very old code), so we'll be happy to transfer this
   code to some maintainer who wish to work with it.

   In LibRaw 0.19 we provide extension API: user-settable callbacks to be called in
   code points where demosaic pack code was called.

   -  int callbacks.pre_identify_cb(void *) => to be called in LibRaw::open_datastream
       before call to (standard) identify() function. If this call returns 1, this means
       that RAW file is identified and all metadata fields are set, so no need to run
       standard identify code.
   - void callbacks.post_identify_cb(void*) => called just after identify(), but before
       any cleanup code;
   - dcraw_process() callbacks are called before dcraw_process phases (name speaks for itself):
        pre_subtractblack_cb, pre_scalecolors_cb, pre_preinterpolate_cb, pre_interpolate_cb,
        interpolate_bayer_cb, interpolate_xtrans_cb, post_interpolate_cb, pre_converttorgb_cb,
        post_converttorgb_cb

   All these new callbacks are called with (this) as the only arg.
   To continue LibRaw-demosaic-pack-GPLx support one need to subclass LibRaw, set needed
   callbacks in (e.g.) constructor code, than these callbacks to be called

 * Better DNG parser:
    - support for DefaultCrop Origin/Size tags (add LIBRAW_PROCESSING_USE_DNG_DEFAULT_CROP to raw_processing_options to enable)
    - better parsing for nested DNG tags (use tag from RAW IFD, fallback to IFD0 if no tag in current IFD)
    - DNG PreviewColorspace extracted into dng_levels.preview_colorspace

 * Metadata extraction:
  - Better extraction of camera measured balance (LIBRAW_WBI_Auto and WBI_Measured),
    this not the same as 'as shot' if some preset/manual tune is used.
  - Extraction of camera custom balances (LIBRAW_WBI_CustomN)
  - Nikon data compression tag extracted into  makernotes.nikon.NEFCompression
  - Hasselblad BaseISO and Gain extracted into makernotes.hasselblad
  - Canon multishot params extracted into makernotes.canon.multishot
  - lot of other vendor-specific makernotes data (see data structures definitions for details).

 * New LibRaw::open_bayer call allows to pass sensor dump w/o metadata directly to LibRaw:
     virtual int open_bayer(unsigned char *data, unsigned datalen,
          ushort _raw_width, ushort _raw_height, ushort _left_margin, ushort _top_margin,
          ushort _right_margin, ushort _bottom_margin,
          unsigned char procflags, unsigned char bayer_pattern, unsigned unused_bits, unsigned otherflags,
          unsigned black_level);
    Parameters:
     data, datalen - buffer passed
     width/height/margins - speaks for itself
     procflags:
     for 10-bit format:
      1: "4 pixels in 5 bytes" packing is used
      0: "6 pixels in 8 bytes" packing is used
     for 16-bit format:
      1: Big-endian data
    bayer_pattern: one of LIBRAW_OPENBAYER_RGGB,LIBRAW_OPENBAYER_BGGR,
                          LIBRAW_OPENBAYER_GRBG,LIBRAW_OPENBAYER_GBRG
    unused_bits: count of upper zero bits
    otherflags:
      Bit 1 - filter (average neighbors) for pixels with values of zero
      Bits 2-4 - the orientation of the image (0=do not rotate, 3=180, 5=90CCW, 6=90CW)
    black_level: file black level (it also may be specified via imgdata.params)

    see samples/openbayer_sample.cpp for usage sample (note, this sample is 'sample only', suited for
    Kodak KAI-0340 sensor, you'll need change open_bayer() params for your data).

 * Color data added/updated/fixed for many cameras

 * Correct data maximum for Fuji X-* cameras

 * Thumbnail processing:
   - JPEG thumbnails: if compiled with libjpeg, color count is extracted into imgdata.thumbnail.tcolors
   - PPM (bitmap) thumbnails: color count is set according to thumbnail IFD tag
   - PPM16 thumbnails: if LIBRAW_PROCESSING_USE_PPM16_THUMBS set in raw_processing_options, than thumbnail will be extracted
     as is, not converted to 8 bit. thumbnail.tformat is set to LIBRAW_THUMBNAIL_BITMAP16 in this case.
     Untested, because it is hard to find RAWs with 16-bit bitmaps.

== Compatibility fixes

 * struct tiff_tag renamed to libraw_tiff_tag
 * pow64f renamed to libraw_pow64f

== Bugs fixed:

 * COLOR(r,c) works correctly on X-Trans files

== Security fixes:
Secunia #81000:
Credit: Laurent Delosieres, Secunia Research at Flexera
 * leaf_hdr_load_raw: check for image pointer for demosaiced raw
 * NOKIARAW parser: check image dimensions readed from file
 * quicktake_100_load_raw: check width/height limits

Secunia #79000:
Credit: Laurent Delosieres, Secunia Research at Flexera
 * All legacy (RGB raw) image loaders checks for imgdata.image is not NULL
 * kodak_radc_load_raw: check image size before processing
 * legacy memory allocator: allocate max(widh,raw_width)*max(height,raw_height)

Secunia #76000:
 * Fixed fuji_width handling if file is neither fuji nor DNG
 * Fixed xtrans interpolate for broken xtrans pattern
 * Fixed panasonic decoder
 * LibRaw 0.18.6

Other fixes:
 * Checks for width+left_margin/height+top_margin not larger than 64k
 * LIBRAW_MAX_ALLOC_MB define limits maximum image/raw_image allocation
   (default is 2048 so 2Gb per array)
 * LibRaw::read_shorts item count is now unsigned
 * Fixed possible out of bound access in Kodak 65000 loader
 * CVE-2017-14348: Fix for possible heap overrun in Canon makernotes parser
   Credit: Henri Salo from Nixu Corporation
 * Fix for CVE-2017-13735
 * CVE-2017-14265: Additional check for X-Trans CFA pattern data
 * Fixed several errors (Secunia advisory SA75000)
 * ACES colorspace output option included in dcraw_emu help page
 * Avoided possible 32-bit overflows in Sony metadata parser
 * Phase One flat field code called even for half-size


To generate a diff of this commit:
cvs rdiff -u -r1.28 -r1.29 pkgsrc/graphics/libraw/Makefile
cvs rdiff -u -r1.6 -r1.7 pkgsrc/graphics/libraw/buildlink3.mk
cvs rdiff -u -r1.23 -r1.24 pkgsrc/graphics/libraw/distinfo

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Modified files:

Index: pkgsrc/graphics/libraw/Makefile
diff -u pkgsrc/graphics/libraw/Makefile:1.28 pkgsrc/graphics/libraw/Makefile:1.29
--- pkgsrc/graphics/libraw/Makefile:1.28        Sat Apr 14 03:45:56 2018
+++ pkgsrc/graphics/libraw/Makefile     Wed Jul 10 20:27:59 2019
@@ -1,6 +1,6 @@
-# $NetBSD: Makefile,v 1.28 2018/04/14 03:45:56 markd Exp $
+# $NetBSD: Makefile,v 1.29 2019/07/10 20:27:59 nia Exp $
 
-DISTNAME=      LibRaw-0.18.8
+DISTNAME=      LibRaw-0.19.3
 PKGNAME=       ${DISTNAME:tl}
 CATEGORIES=    graphics
 MASTER_SITES=  https://www.libraw.org/data/

Index: pkgsrc/graphics/libraw/buildlink3.mk
diff -u pkgsrc/graphics/libraw/buildlink3.mk:1.6 pkgsrc/graphics/libraw/buildlink3.mk:1.7
--- pkgsrc/graphics/libraw/buildlink3.mk:1.6    Sat Jul 18 10:40:20 2015
+++ pkgsrc/graphics/libraw/buildlink3.mk        Wed Jul 10 20:27:59 2019
@@ -1,4 +1,4 @@
-# $NetBSD: buildlink3.mk,v 1.6 2015/07/18 10:40:20 adam Exp $
+# $NetBSD: buildlink3.mk,v 1.7 2019/07/10 20:27:59 nia Exp $
 
 BUILDLINK_TREE+=       libraw
 
@@ -6,7 +6,7 @@ BUILDLINK_TREE+=        libraw
 LIBRAW_BUILDLINK3_MK:=
 
 BUILDLINK_API_DEPENDS.libraw+= libraw>=0.16.0
-BUILDLINK_ABI_DEPENDS.libraw+= libraw>=0.16.0
+BUILDLINK_ABI_DEPENDS.libraw+= libraw>=0.19.3
 BUILDLINK_PKGSRCDIR.libraw?=   ../../graphics/libraw
 
 .include "../../graphics/jasper/buildlink3.mk"

Index: pkgsrc/graphics/libraw/distinfo
diff -u pkgsrc/graphics/libraw/distinfo:1.23 pkgsrc/graphics/libraw/distinfo:1.24
--- pkgsrc/graphics/libraw/distinfo:1.23        Sat Apr 14 03:45:56 2018
+++ pkgsrc/graphics/libraw/distinfo     Wed Jul 10 20:27:59 2019
@@ -1,9 +1,9 @@
-$NetBSD: distinfo,v 1.23 2018/04/14 03:45:56 markd Exp $
+$NetBSD: distinfo,v 1.24 2019/07/10 20:27:59 nia Exp $
 
-SHA1 (LibRaw-0.18.8.tar.gz) = ddb14dda08088272c04a65c7a7fd9773d6eb6d81
-RMD160 (LibRaw-0.18.8.tar.gz) = 5ebd40cbee268c18692a5e6f4daaf05c6d2e3c58
-SHA512 (LibRaw-0.18.8.tar.gz) = 48871a5e43c89a17962fae426a962d11a6ce40cb8e7d8abc90e98c899dc42b7e1711398c075901ddbc710fe7e916ba6d507bee7e18975779caa8f5d512b1d580
-Size (LibRaw-0.18.8.tar.gz) = 1281773 bytes
+SHA1 (LibRaw-0.19.3.tar.gz) = 75d72ab8de5d0cd2e66aa6c9a0d776608a780f0f
+RMD160 (LibRaw-0.19.3.tar.gz) = ef5a36835187bb699ba8b5b991f5d080952cce2a
+SHA512 (LibRaw-0.19.3.tar.gz) = e025695fb7f0016aeec76c0843a94387633457eee838cc48e65d1e84e703c8530b3fdd1e31d85dc322d3f2f6092b7c313fa6d1c3009fe1257c3d9411128b6fe2
+Size (LibRaw-0.19.3.tar.gz) = 1302745 bytes
 SHA1 (patch-internal_libraw__x3f.cpp) = ec5d479a45d7fc25c884cc7259ad513857fa2711
 SHA1 (patch-libraw__r.pc.in) = e691f79c69c5530c93262c270fe7e2f5b1c959d9
 SHA1 (patch-src_libraw__cxx.cpp) = cfbb3afbd0b44ce1bbc24e5af212ad5c53d251b7