pkgsrc-Changes archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

CVS commit: pkgsrc/sysutils/smartmontools

Module Name:    pkgsrc
Committed By:   tnn
Date:           Sat Nov 13 10:10:46 UTC 2010

Modified Files:
        pkgsrc/sysutils/smartmontools: Makefile PLIST distinfo
        pkgsrc/sysutils/smartmontools/patches: patch-aa
Removed Files:
        pkgsrc/sysutils/smartmontools/patches: patch-ah

Log Message:
Update to smartmontools-5.40 (ok shattered@)

Date 2010-10-16
Summary: smartmontools release 5.40
- Other config entries may precede smartd DEVICESCAN.
- Option '-v' allows to specify byte order of attribute raw value
- configure: New default value for '--with-docdir'.
- configure: '--enable-drivedb' is now the default.
- Improved support for Intel SSDs.
- Improved support for SandForce based SSDs.
- Drive database is in a separate source file 'drivedb.h'
  which can be downloaded from SVN.
- USB ID info is now included in 'drivedb.h'.
- Many additions to drive database.
- New script 'update-smart-drivedb'.
- smartd libcap-ng support, option '-C, --capabilities'.
- smartd directive '-l xerror' to check Extended Comprehensive
  SMART Error Log.
- smartctl option '-l scterc[,...]' to get/set the
  SCT Error Recovery Control time limit.
- smartctl option '-t vendor,N'.
- smartctl options '--scan, --scan-open'.
- Linux: Add '/dev/sd[a-c][a-z]' to smartd DEVICESCAN.
- Linux: Support SATA drives on LSI 3ware 9750 controllers.
- Windows: Read 'drivedb.h' and 'smartd.conf' from exe directory.
- Windows: Support for 64-bit executables.
- Windows: Support for cross compilation on Linux.
- Fix regression in smartctl option '-t select,M-N'.
- Fix SCT temperature table commands on big endian CPUs.
- Fix regression in smartd SMARTD_DEVICE and SMARTD_DEVICETYPE
  environment variables.

Date 2010-01-28
Summary: smartmontools release 5.39.1
- Fix crash on kFreeBSD.
- Fix regression in smartctl option '-q, --quietmode'.
- Fix regression in smartd directive '-l selftest'.
- Linux: Allow smartd 'DEVICESCAN -d sat'.
- Linux: Fix spin-up of SATA drive if '-n standby' is used.
- Windows: Fix parsing of 3ware 'tw_cli' output.

Date 2009-12-09
Summary: smartmontools release 5.39 (UNSTABLE/EXPERIMENTAL)
- Sourcecode repository moved from CVS to SVN
- Support for USB devices with Cypress, JMicron and Sunplus USB bridges
- USB device type autodetection for some devices on Linux, Windows and FreeBSD
- Support for Areca controllers on Linux
- Support for MegaRAID controllers on Linux
- Support for HighPoint RocketRAID controllers on FreeBSD
- Support RAID controllers using /dev/pass devices on FreeBSD
- Support for up to 128 devices on 3ware controllers
- smartctl option '-l xerror' to print ATA SMART Extended Comprehensive
  Error Log
- smartctl option '-l xselftest' to print ATA SMART Extended Self-test Log
- smartctl option '-l sataphy' to print SATA Phy Event Counters
- smartctl option '-l sasphy' to print SAS device phy information
- smartctl options '-l gplog,...' and '-l smartlog,...' to print any log page
- smartctl option '-x' to print all extended info if available
- smartctl prints SCSI load/unload cycle counts
- Improve display of huge raw values of some SMART attributes
- Option '-d sat+TYPE' to use SAT with controllers which require '-d TYPE'
- Option '-v ID,RAW_FORMAT,ATTR_NAME' to add new vendor specific attributes
- Support for SSD drives using 64-bit raw attributes
- Many additions to drive database
- New simplified syntax for drive database
- Option '-B FILE' to read drive database from a file
- Configure option to add drive database file to distribution
- smartd can now handle attributes 197 and 198 with increasing raw values
- smartd logs changes of self-test execution status
- smartd directive '-n powermode,N' to limit the number of skipped checks
- smartd flag '!' for '-r' and '-R' directives to log changes as critical
- smartd supports scheduled Selective Self-Tests
- Self-tests scheduled during system downtime or disk standby are run after
  next startup
- smartd option '-s PREFIX' to store smartd internal state until next startup
- smartd option '-A PREFIX' to log attributes at each check cycle
- Configure options to enable the above by default
- Change to an object oriented interface to access ATA and SCSI devices
- Linux, Win32 and FreeBSD modules migrated to new interface
- Rework of smartd data structures
- Checkin date and SVN revision and optional BUILD_INFO printed in version info
- Better support for GSmartControl on Windows
- SELinux fixes to 3ware device node creation
- Fix CCISS file descriptor leak on FreeBSD
- Compile fixes for Solaris and FreeBSD
- Use getaddrinfo() instead of gethostbyname() to support IPv6
- C++ Support for QNX Target, already tested for QNX 6.3.2 on x86 and
  armle target
- Additional support for Samsung MLC flash drives
- New device type detection algorithm on FreeBSD, not based on filename
- Support for the adaX (ATA on CAM bus) devices on FreeBSD 8.0 and higher

To generate a diff of this commit:
cvs rdiff -u -r1.17 -r1.18 pkgsrc/sysutils/smartmontools/Makefile
cvs rdiff -u -r1.4 -r1.5 pkgsrc/sysutils/smartmontools/PLIST
cvs rdiff -u -r1.16 -r1.17 pkgsrc/sysutils/smartmontools/distinfo
cvs rdiff -u -r1.5 -r1.6 pkgsrc/sysutils/smartmontools/patches/patch-aa
cvs rdiff -u -r1.1 -r0 pkgsrc/sysutils/smartmontools/patches/patch-ah

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Home | Main Index | Thread Index | Old Index