[pkgsrc/trunk]: pkgsrc/mail/sendmail - Update sendmail to 8.13.3

To: pkgsrc-changes-hg%NetBSD.org@localhost
Subject: [pkgsrc/trunk]: pkgsrc/mail/sendmail - Update sendmail to 8.13.3
From: adrianp <adrianp%pkgsrc.org@localhost>
Date: Thu, 14 Oct 2021 01:20:11 +0000
details:   https://anonhg.NetBSD.org/pkgsrc/rev/d4724cbe01bd
branches:  trunk
changeset: 488875:d4724cbe01bd
user:      adrianp <adrianp%pkgsrc.org@localhost>
date:      Thu Feb 10 22:17:24 2005 +0000

description:
- Update sendmail to 8.13.3
- Fix smrsh man page patch
- Tidy up MESSAGE
- Replace 8.13.1 errata with 8.13.3 errata
- Remove rename of file outside ${PREFIX} on db2 installs

> 8.13.3/8.13.3 2005/01/11
>       Enhance handling of I/O errors, especially EOF, when STARTTLS
>               is active.
>       Make sure a connection is not reused after it has been closed
>               due to a 421 error.  Problem found by Allan E Johannesen
>               of Worcester Polytechnic Institute.
>       Avoid triggering an assertion when sendmail is interrupted while
>               closing a connection.  Problem found by Allan E Johannesen
>               of Worcester Polytechnic Institute.
>       Regression: a change in 8.13.2 caused sendmail not to try the
>               next MX host (or FallbackMXhost if configured) when, at
>               connection open, the current server returns a 4xy or 5xy
>               SMTP reply code.  Problem noted by Mark Tranchant.
>
> 8.13.2/8.13.2 2004/12/15
>       Do not split the first header even if it exceeds the internal
>               buffer size.  Previously a part of such a header would
>               end up in the body of the message.  Problem noted by
>               Simple Nomad of BindView.
>       Do not complain about "cataddr: string too long" when checking
>               headers that do not contain RFC 2822 addresses.
>               Problem noted by Rich Graves of Brandeis University.
>       If a server returns a 421 reply to the RSET command between
>               message deliveries, do not attempt to deliver any more
>               messages on that connection.  This prevents bogus "Bad
>               file number" recipient status.  Problem noted by
>               Allan E Johannesen of Worcester Polytechnic Institute.
>       Allow trailing white space in EHLO command as recommended by RFC
>               2821.  Problem noted by Ralph Santagato of SBC Services.
>       Deal with clients which use AUTH but negotiate a smaller buffer size
>               for data exchanges than the value used by sendmail, e.g.,
>               Cyrus IMAP lmtp server.  Based on patch by Jamie Clark.
>       When passing ESMTP arguments for RCPT to a milter, do not cut
>               them off at a comma.  Problem noted by Krzysztof Oledzki.
>       Add more logging to milter change header functions to
>               complement existing logging.  Based on patch from
>               Gurusamy Sarathy of Active State.
>       Include <lber.h> in include/sm/config.h when LDAPMAP is defined.
>               Patch from Edgar Hoch of the University of Stuttgart.
>       Fix DNS lookup if IPv6 is enabled when converting an IP address
>               to a hostname for use with SASL.  Problem noted by Ken Jones;
>               patch from Hajimu UMEMOTO.
>       CONFIG: For consistency enable MODIFY_MAILER_FLAGS for the prog
>               mailer.  Patch from John Beck of Sun Microsystems.
>       LIBMILTER: It was possible that xxfi_abort() was called after
>               xxfi_eom() for a message if some timeouts were triggered.
>               Patch from Alexey Kravchuk.
>       LIBMILTER: Slightly rearrange mutex use in listener.c to allow
>               different threads to call smfi_opensocket() and smfi_main().
>               Patch from Jordan Ritter of Cloudmark.
>       MAIL.LOCAL: Properly terminate MBDB before exiting.  Problem
>               noted by Nelson Fung.
>       MAIL.LOCAL: make strip-mail.local used a wrong path to access
>               mail.local.  Problem noted by William Park.
>       VACATION: Properly terminate MBDB before exiting.  Problem noted
>               by Nelson Fung.
>       Portability:
>               Add support for DragonFly BSD.
>       New Files:
>               cf/ostype/dragonfly.m4
>               devtools/OS/DragonFly
>               include/sm/os/sm_os_dragonfly.h
>       Deleted Files:
>               libsm/vsscanf.c

diffstat:

 mail/sendmail/MESSAGE          |   5 ++-
 mail/sendmail/Makefile         |  12 +------
 mail/sendmail/Makefile.common  |   5 +-
 mail/sendmail/PLIST            |   3 +-
 mail/sendmail/distinfo         |  10 +++---
 mail/sendmail/patches/patch-ah |  30 +++++++++++++++---
 mail/sendmail/patches/patch-ai |  67 ++++++++++++++++++++++++++++++++++++-----
 7 files changed, 96 insertions(+), 36 deletions(-)

diffs (234 lines):

diff -r 00b8da3cae84 -r d4724cbe01bd mail/sendmail/MESSAGE
--- a/mail/sendmail/MESSAGE     Thu Feb 10 19:27:32 2005 +0000
+++ b/mail/sendmail/MESSAGE     Thu Feb 10 22:17:24 2005 +0000
@@ -1,9 +1,12 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.3 2003/05/01 15:19:11 jmmv Exp $
+$NetBSD: MESSAGE,v 1.4 2005/02/10 22:17:24 adrianp Exp $
 
 To use "${PKGNAME}" as the system's mail transport agent you have
 to install "${PREFIX}/share/examples/sendmail/mailer.conf" as global
 mailwrapper configuration file.  The command below will do that for you:
 
 ln -fs ${PREFIX}/share/examples/sendmail/mailer.conf /etc/mailer.conf
+
+If you are changing the database format used by sendmail you must run
+"newaliases" and "makemap" in order to re-create the databases.
 ===========================================================================
diff -r 00b8da3cae84 -r d4724cbe01bd mail/sendmail/Makefile
--- a/mail/sendmail/Makefile    Thu Feb 10 19:27:32 2005 +0000
+++ b/mail/sendmail/Makefile    Thu Feb 10 22:17:24 2005 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.73 2004/08/30 20:16:28 adrianp Exp $
+# $NetBSD: Makefile,v 1.74 2005/02/10 22:17:24 adrianp Exp $
 
 .include "../../mail/sendmail/Makefile.common"
 
@@ -57,12 +57,6 @@
        @${CP} ${PKGDIR}/MESSAGE ${MESSAGE_SRC}
        @${CP} ${PKGDIR}/PLIST ${WRKDIR}/.PLIST_SRC
 
-.if !empty(PKG_OPTIONS:Mdb2)
-       @${ECHO} "" >>${MESSAGE_SRC}
-       @${ECHO} "If you are upgrading from \"sendmail\" 8.8.x don't forget to rebuild all" >>${MESSAGE_SRC}
-       @${ECHO} "databases with \"${PREFIX}/bin/newaliases\" and \"${PREFIX}/sbin/makemap\"." >>${MESSAGE_SRC}
-.endif
-
 pre-install:
        ${INSTALL_DATA_DIR} ${PREFIX}/libexec/sendmail
 
@@ -76,10 +70,6 @@
        cd ${WRKSRC}/cf && ${PAX} -rw -pp -pm . ${PREFIX}/share/sendmail
        ${CHOWN} -R ${BINOWN}:${BINGRP} ${PREFIX}/share/sendmail
 
-.if !empty(PKG_OPTIONS:Mdb2)
-       @${MV} -f /usr/sbin/makemap /usr/sbin/makemap.8.8 || ${TRUE}
-.endif
-
        ${INSTALL_DATA} ${WRKSRC}/obj.`${UNAME} -srm | ${TR} \  . | ${TR} \/ - | ${SED} s/sun4./sun4/`/libsm/libsm.a \
                ${PREFIX}/lib
 
diff -r 00b8da3cae84 -r d4724cbe01bd mail/sendmail/Makefile.common
--- a/mail/sendmail/Makefile.common     Thu Feb 10 19:27:32 2005 +0000
+++ b/mail/sendmail/Makefile.common     Thu Feb 10 22:17:24 2005 +0000
@@ -1,11 +1,10 @@
-# $NetBSD: Makefile.common,v 1.22 2004/10/03 02:08:40 tv Exp $
+# $NetBSD: Makefile.common,v 1.23 2005/02/10 22:17:24 adrianp Exp $
 #
 # Makefile fragment shared with libmilter
 #
 
 DISTNAME=      sendmail.${DIST_VERS}
 CATEGORIES=    mail
-PKGREVISION=   2
 MASTER_SITES=  ftp://ftp.sendmail.org/pub/sendmail/ \
                ftp://ftp.fu-berlin.de/pub/unix/mail/sendmail/ \
                ftp://ftp.ayamura.org/pub/sendmail/
@@ -19,7 +18,7 @@
 FILESDIR?=     ${.CURDIR}/../../mail/sendmail/files
 PATCHDIR?=     ${.CURDIR}/../../mail/sendmail/patches
 
-DIST_VERS=     8.13.1
+DIST_VERS=     8.13.3
 
 MAKE_ENV+=     BSD_BINOWN="${BINOWN}" BSD_BINGRP="${BINGRP}" \
                BSD_MANOWN="${MANOWN}" BSD_MANGRP="${MANGRP}" \
diff -r 00b8da3cae84 -r d4724cbe01bd mail/sendmail/PLIST
--- a/mail/sendmail/PLIST       Thu Feb 10 19:27:32 2005 +0000
+++ b/mail/sendmail/PLIST       Thu Feb 10 22:17:24 2005 +0000
@@ -1,4 +1,4 @@
-@comment $NetBSD: PLIST,v 1.8 2004/08/30 20:16:28 adrianp Exp $
+@comment $NetBSD: PLIST,v 1.9 2005/02/10 22:17:24 adrianp Exp $
 bin/hoststat
 bin/mailq
 bin/newaliases
@@ -168,6 +168,7 @@
 share/sendmail/ostype/darwin.m4
 share/sendmail/ostype/dgux.m4
 share/sendmail/ostype/domainos.m4
+share/sendmail/ostype/dragonfly.m4
 share/sendmail/ostype/dynix3.2.m4
 share/sendmail/ostype/freebsd4.m4
 share/sendmail/ostype/freebsd5.m4
diff -r 00b8da3cae84 -r d4724cbe01bd mail/sendmail/distinfo
--- a/mail/sendmail/distinfo    Thu Feb 10 19:27:32 2005 +0000
+++ b/mail/sendmail/distinfo    Thu Feb 10 22:17:24 2005 +0000
@@ -1,7 +1,7 @@
-$NetBSD: distinfo,v 1.19 2004/08/31 10:51:22 adrianp Exp $
+$NetBSD: distinfo,v 1.20 2005/02/10 22:17:24 adrianp Exp $
 
-SHA1 (sendmail.8.13.1.tar.gz) = ce2d3897a7dca4e75facfd48d100ccd3773e2894
-Size (sendmail.8.13.1.tar.gz) = 1963257 bytes
+SHA1 (sendmail.8.13.3.tar.gz) = cd4a5d8726cd72e58220558b1191f7bfdcd7920c
+Size (sendmail.8.13.3.tar.gz) = 1969226 bytes
 SHA1 (patch-aa) = b7ceece7760e3d637016da039f8429c1fb89f2cf
 SHA1 (patch-ab) = a2abf6e78772e257e2a1973e7730159ff24a91aa
 SHA1 (patch-ac) = 96c19300b4188dbcbd202768eea912f675dadc27
@@ -9,5 +9,5 @@
 SHA1 (patch-ae) = ae06caa125fe4d4fc85123dc0a5d0016cd099ebd
 SHA1 (patch-af) = d26481845328adad6d46fdf797785ec2ad003e28
 SHA1 (patch-ag) = a87e1685f343703d21a42ec1df68cbba963fa178
-SHA1 (patch-ah) = 94133440eb4300545541a69fd622c3751d04fab2
-SHA1 (patch-ai) = b6f56acd96eb80f1969d68c2f5edcca8a2b8b352
+SHA1 (patch-ah) = e6be09008b9230ffdd1560aaacbdbb2ee4fb8028
+SHA1 (patch-ai) = eaf39ce0ab004ac976fff69d74b4c17afc0b4dae
diff -r 00b8da3cae84 -r d4724cbe01bd mail/sendmail/patches/patch-ah
--- a/mail/sendmail/patches/patch-ah    Thu Feb 10 19:27:32 2005 +0000
+++ b/mail/sendmail/patches/patch-ah    Thu Feb 10 22:17:24 2005 +0000
@@ -1,8 +1,26 @@
-$NetBSD: patch-ah,v 1.1 2004/08/30 20:16:28 adrianp Exp $
+$NetBSD: patch-ah,v 1.2 2005/02/10 22:17:24 adrianp Exp $
 
---- smrsh/smrsh.8.orig Mon Aug 30 18:00:16 2004
-+++ smrsh/smrsh.8      Mon Aug 30 18:00:57 2004
-@@ -86,13 +86,9 @@
+--- smrsh/smrsh.8.orig 2004-08-06 04:55:35.000000000 +0100
++++ smrsh/smrsh.8
+@@ -39,7 +39,7 @@ Briefly,
+ .I smrsh
+ limits programs to be in a single directory,
+ by default
+-/usr/adm/sm.bin,
++@@SMRSH_CMDDIR@@,
+ allowing the system administrator to choose the set of acceptable commands,
+ and to the shell builtin commands ``exec'', ``exit'', and ``echo''.
+ It also rejects any commands with the characters
+@@ -56,7 +56,7 @@ so forwarding to ``/usr/ucb/vacation'',
+ and
+ ``vacation''
+ all actually forward to
+-``/usr/adm/sm.bin/vacation''.
++``@@SMRSH_CMDDIR@@/vacation''.
+ .PP
+ System administrators should be conservative about populating
+ the sm.bin directory.
+@@ -86,13 +86,9 @@ to adjust the default search path
  (defaults to ``/bin:/usr/bin:/usr/ucb'')
  and/or \-DSMRSH_CMDDIR=\e"\fIdir\fP\e"
  to change the default program directory
@@ -13,8 +31,8 @@
 -.PP
 -/var/adm/sm.bin \- directory for restricted programs on HP UX and Solaris
 -.PP
--/usr/libexec/sm.bin \- directory for restricted programs on FreeBSD (>= 3.3)
-+@@SMRSH_CMDDIR@@ \- default directory for restricted programs on most OSs
+-/usr/libexec/sm.bin \- directory for restricted programs on FreeBSD (>= 3.3) and DragonFly BSD
++@@SMRSH_CMDDIR@@ \- default directory for restricted programs
  
  .SH SEE ALSO
  sendmail(8)
diff -r 00b8da3cae84 -r d4724cbe01bd mail/sendmail/patches/patch-ai
--- a/mail/sendmail/patches/patch-ai    Thu Feb 10 19:27:32 2005 +0000
+++ b/mail/sendmail/patches/patch-ai    Thu Feb 10 22:17:24 2005 +0000
@@ -1,13 +1,62 @@
-$NetBSD: patch-ai,v 1.1 2004/08/31 10:51:22 adrianp Exp $
+$NetBSD: patch-ai,v 1.2 2005/02/10 22:17:24 adrianp Exp $
 
---- sendmail/parseaddr.c.orig  Tue Aug 31 09:47:04 2004
-+++ sendmail/parseaddr.c       Tue Aug 31 09:47:31 2004
-@@ -2196,7 +2196,7 @@
+--- sendmail/mci.c.orig        2004-08-04 22:11:31.000000000 +0100
++++ sendmail/mci.c
+@@ -398,6 +398,57 @@ mci_get(host, m)
  
-       /* Don't silently truncate long strings */
-       if (sz <= 0)
--              syserr("cataddr: string too long");
-+              usrerr("cataddr: string too long");
-       *p = '\0';
+       return mci;
  }
++
++/*
++**  MCI_CLOSE -- (forcefully) close files used for a connection.
++**    Note: this is a last resort, usually smtpquit() or endmailer()
++**            should be used to close a connection.
++**
++**    Parameters:
++**            mci -- the connection to close.
++**            where -- where has this been called?
++**
++**    Returns:
++**            none.
++*/
++
++void
++mci_close(mci, where)
++      MCI *mci;
++      char *where;
++{
++      bool dumped;
++
++      if (mci == NULL)
++              return;
++      dumped = false;
++      if (mci->mci_out != NULL)
++      {
++              if (tTd(56, 1))
++              {
++                      sm_dprintf("mci_close: mci_out!=NULL, where=%s\n",
++                              where);
++                      mci_dump(sm_debug_file(), mci, false);
++                      dumped = true;
++              }
++              (void) sm_io_close(mci->mci_out, SM_TIME_DEFAULT);
++              mci->mci_out = NULL;
++      }
++      if (mci->mci_in != NULL)
++      {
++              if (tTd(56, 1))
++              {
++                      sm_dprintf("mci_close: mci_in!=NULL, where=%s\n",
++                              where);
++                      if (!dumped)
++                              mci_dump(sm_debug_file(), mci, false);
++              }
++              (void) sm_io_close(mci->mci_in, SM_TIME_DEFAULT);
++              mci->mci_in = NULL;
++      }
++      mci->mci_state = MCIS_CLOSED;
++}
++
  /*
+ **  MCI_NEW -- allocate new MCI structure
+ **
Prev by Date: [pkgsrc/trunk]: pkgsrc/x11/xorg-imake Install the DragonFly.cf file too, from...
Next by Date: [pkgsrc/trunk]: pkgsrc/print/tex-musixtex teTeX3 doesnt' have virtex either -...
Previous by Thread: [pkgsrc/trunk]: pkgsrc/x11/xorg-imake Install the DragonFly.cf file too, from...
Next by Thread: [pkgsrc/trunk]: pkgsrc/print/tex-musixtex teTeX3 doesnt' have virtex either -...
Indexes:
Home | Main Index | Thread Index | Old Index