[pkgsrc/pkgsrc-2005Q1]: pkgsrc/mail/poppassd Pullup ticket 540 - requested by...

[salo <salo%pkgsrc.org@localhost>]

details:   https://anonhg.NetBSD.org/pkgsrc/rev/85931a82fa2d
branches:  pkgsrc-2005Q1
changeset: 491098:85931a82fa2d
user:      salo <salo%pkgsrc.org@localhost>
date:      Sun Jun 05 18:40:05 2005 +0000

description:
Pullup ticket 540 - requested by Adrian Portelli
security update for poppassd

Revisions pulled up:
- pkgsrc/mail/poppassd/Makefile         1.15-1.16
- pkgsrc/mail/poppassd/MESSAGE          1.3
- pkgsrc/mail/poppassd/distinfo         1.11

   Module Name:         pkgsrc
   Committed By:        taca
   Date:                Sat May 28 02:57:22 UTC 2005

   Modified Files:
        pkgsrc/mail/poppassd: Makefile

   Log Message:
   - Share MASTER_SITES and HOMEPAGE with qpopper package using
     QPOPPER_MASTER_SITES and QPOPPER_HOMEPAGE defined in
     ../qpopper/Makefile.common.

   No functional change.
---
   Module Name:         pkgsrc
   Committed By:        adrianp
   Date:                Wed Jun  1 21:00:39 UTC 2005

   Modified Files:
        pkgsrc/mail/poppassd: MESSAGE Makefile distinfo

   Log Message:
   - Update poppassd to 4.0.8
   - Thanks to taca@ and gavan@ for feedback and patch review
   - This also enables experimental PAM support (on platforms that support it)
   - Security fixes included
   - From the ChangeLog:
   Changes from 4.0.7 to 4.0.8:
   > ---------------------------
   >  1.  Fix compilation error on HPUX.
   >  2.  Fix some compilation warnings.
   >  3.  Update man page with '-x' option.
   >  4.  Fix problems with 'make install'
   >
   >
   > Changes from 4.0.6 to 4.0.7:
   > ---------------------------
   >  1.  Fix '-V' for standalone.
   >  2.  Include 'man' directory in tarball.
   >
   >
   > Changes from 4.0.5 to 4.0.6:
   > ----------------------------
   >  1.  Minor fixes for true64.
   >  2.  Patch from Uli Zappe to fix SCRAM compilation bugs.
   >  3.  Minor fixes for true64.
   >  4.  poppassd now runs smbpasswd as user, not root, to avoid exploit
   >  5.  Remove -traditional-cpp from the compiler options for Darwin
   >      builds (otherwise build fails)
   >  6.  Open stdout and stderr as O_WRONLY instead of O_RDONLY so that
   >      should anything actually be written to them it will show up
   >  7.  When configured as --with-pam and required,
   >      include <pam/pam_appl.h> instead of <security/pam_appl.h>
   >      (otherwise build fails)
   >  8.  strdup the pw.pw_name field from getpwnam so that it's still
   >      valid by the time genpath is called; also added corresponding
   >      free (without this fix when the bug manifests, clients are
   >      erroneously told there are 0 messages in the mail drop
   >      regardless of the actual number)
   >  9.  Add a pam bug workaround at the beginning of main to do a
   >      pam_start and pam_end immediately when the program starts up
   >      in order to avoid bogus authentication failed messages from
   >      pam_authenticate later (only when configured as --with-pam)
   >      [ Thanks to Kyle McKay for changes 5-9 ]
   > 10.  Fixed error in configure script for Mac OS / Darwin.
   > 11.  Support chained certs for OpenSSL [from Daniel Senie].
   > 12.  Fixes to compile better on Linux [from Daniel Senie].
   > 13.  X-UIDL header no longer written when Update_status_hdrs is false
   >      [thanks to Helge Oldach]
   > 14.  Now calling SSL_shutdown() again if it fails the first time.
   > 15.  Now logging TLS errors when compiled with debugging and debug is
   >      enabled (instead of either) [thanks to Maks N. Polunin].
   > 16.  Config file now always closed (not just on error).
   > 17.  When using pam, Kerberos tickets are now destroyed.
   >      Otherwise dead tickets accumulate in cache directory which runs
   >      out of space quickly on busy server.  Problem noted by Rodney
   >      McDuff ITS UQ.   (Directory permissions on ticket cache dir need
   >      to be 1777).
   > 18.  Always log "Servicing request" (instead of just when debugging is
   >      on).   This allows start of pop sessions to be logged always which
   >      is useful for diagnosis of problems.
   > 19.  Worked around problem on some systems causing SIGALRM to be masked,
   >      leaving hung pop processes which should have timed out waiting
   >      for a command from the client.
   >      [ Thanks to David Shrimpton for changes 16-19 ]
   > 20.  Now defaulting to "EXPIRE NEVER" instead of "EXPIRE 0".
   > 21.  Fix core dump on 64-bit Solaris 2.8 [thanks to Kenny Nguyen]
   > 22.  Log facility set on command line now applies to daemon as well.
   >      [Thanks to Helge Oldach]
   > 23.  '-y' to set log facility on command line now works again.
   > 24.  Allow '-V' as synonym for '-v' (to see version).
   > 25.  Process user and spool config files as user, not as root (fix
   >      security hole reported by Jens Steube)
   > 26.  Added "xtnd_xmit" as a boolean option to permit/deny XTND XMIT
   >      and 'x' as a command-line option to disable it.  You should
   >      disable it unless you really need it, and even then it is better
   >      to move to SMTP AUTH.
   > 27.  popauth now opens trace file as user, not root (fix security
   >      hole reported by Jens Steube); also umask now set.
   > 28.  Fix race crash on FreeBSD (thanks to Martin Haller).
   > 29.  Resolve some compiler warnings.
   > 30.  Fix check for libcrypt on FreeBSD.
   > 31.  Added sample pam configuration file (also installed by 'make
   >      install')
   > 32.  Use generic error msg and sleep in more auth failure cases.
   > 33.  Added code to use mkstemp() instead of our perfectly safe usage
   >      of tempnam() because some compilers issue overly broad warnings
   >      implying that all uses of tempnam() are unsafe.  To bypass,
   >      use '--enable-tempnam' with ./configure.

diffstat:

 mail/poppassd/MESSAGE  |   3 ++-
 mail/poppassd/Makefile |  11 +++--------
 mail/poppassd/distinfo |  14 +++++++-------
 3 files changed, 12 insertions(+), 16 deletions(-)

diffs (64 lines):

diff -r 089418be7905 -r 85931a82fa2d mail/poppassd/MESSAGE
--- a/mail/poppassd/MESSAGE     Sun Jun 05 18:35:25 2005 +0000
+++ b/mail/poppassd/MESSAGE     Sun Jun 05 18:40:05 2005 +0000
@@ -1,5 +1,5 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.2 2002/09/18 16:15:50 grant Exp $
+$NetBSD: MESSAGE,v 1.2.14.1 2005/06/05 18:40:05 salo Exp $
 
 In order to enable poppassd service, you should add the following line
 to your /etc/services:
@@ -9,5 +9,6 @@
 And /etc/inetd.conf:
 
     poppass stream tcp nowait root ${PREFIX}/libexec/poppassd poppassd
+    poppass stream tcp6 nowait root ${PREFIX}/libexec/poppassd poppassd
 
 ===========================================================================
diff -r 089418be7905 -r 85931a82fa2d mail/poppassd/Makefile
--- a/mail/poppassd/Makefile    Sun Jun 05 18:35:25 2005 +0000
+++ b/mail/poppassd/Makefile    Sun Jun 05 18:40:05 2005 +0000
@@ -1,18 +1,13 @@
-# $NetBSD: Makefile,v 1.13 2004/12/03 15:15:02 wiz Exp $
+# $NetBSD: Makefile,v 1.13.4.1 2005/06/05 18:40:05 salo Exp $
 #
 
 DISTNAME=              qpopper${VERSION}
 PKGNAME=               poppassd-${VERSION}
-PKGREVISION=           3
 CATEGORIES=            mail
-MASTER_SITES=          ftp://ftp.qualcomm.com/eudora/servers/unix/popper/
-
-PATCH_SITES=           http://www.imasy.or.jp/~ume/ipv6/
-PATCHFILES=            qpopper-4.0.5-ipv6-20030313.diff.gz
-PATCH_DIST_STRIP=      -p1
+MASTER_SITES=          ${QPOPPER_MASTER_SITES}
 
 MAINTAINER=            mellon%fugue.com@localhost
-HOMEPAGE=              http://www.eudora.com/qpopper/
+HOMEPAGE=              ${QPOPPER_HOMEPAGE}
 COMMENT=               Qualcomm's password change server mainly for Eudora
 
 .include "../qpopper/Makefile.common"
diff -r 089418be7905 -r 85931a82fa2d mail/poppassd/distinfo
--- a/mail/poppassd/distinfo    Sun Jun 05 18:35:25 2005 +0000
+++ b/mail/poppassd/distinfo    Sun Jun 05 18:40:05 2005 +0000
@@ -1,11 +1,11 @@
-$NetBSD: distinfo,v 1.10 2005/02/24 09:59:26 agc Exp $
+$NetBSD: distinfo,v 1.10.2.1 2005/06/05 18:40:05 salo Exp $
 
-SHA1 (qpopper4.0.5.tar.gz) = 726d40da2210bf4b82541a28971986e6a3d9e1a5
-RMD160 (qpopper4.0.5.tar.gz) = e05c1b0823c8942d791c7b48af82e278a51591d2
-Size (qpopper4.0.5.tar.gz) = 2281284 bytes
-SHA1 (qpopper-4.0.5-ipv6-20030313.diff.gz) = 31858d41e1dab90019152d957a7ea3d69fe085b0
-RMD160 (qpopper-4.0.5-ipv6-20030313.diff.gz) = b9d4329496ed427ca46c8981a2888f4471269737
-Size (qpopper-4.0.5-ipv6-20030313.diff.gz) = 60773 bytes
+SHA1 (qpopper4.0.8.tar.gz) = 161038e6088b4952eedaf85fafa9f3b10eb40a01
+RMD160 (qpopper4.0.8.tar.gz) = 4a1dc2aaa6ef1330a76dfed5330d658a45e7d1d2
+Size (qpopper4.0.8.tar.gz) = 2766902 bytes
+SHA1 (qpopper4.0.8-ipv6-20050515.diff.gz) = 3ccd51fa8fb1633c34dee19e6d50351cb649a3c1
+RMD160 (qpopper4.0.8-ipv6-20050515.diff.gz) = 0ca9a8893e31933d8bf33a3cfa4d88fde511ed5e
+Size (qpopper4.0.8-ipv6-20050515.diff.gz) = 11479 bytes
 SHA1 (patch-aa) = 0dd1bdc832d00bd640e7003afea28f0d90c2f975
 SHA1 (patch-ab) = 713698d5834b569a0ee08088567a71e218d50550
 SHA1 (patch-ac) = db8329f0937554be80a88f4754b37f3a69bd70aa