pkgsrc-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[pkgsrc/trunk]: pkgsrc Update exim to 4.42 and exim-exiscan to 4.42_27:
details: https://anonhg.NetBSD.org/pkgsrc/rev/46ecdfcb7fda
branches: trunk
changeset: 479971:46ecdfcb7fda
user: abs <abs%pkgsrc.org@localhost>
date: Fri Aug 27 10:46:52 2004 +0000
description:
Update exim to 4.42 and exim-exiscan to 4.42_27:
Feature changes in exim since 4.34 (bugfixes not listed):
Version 4.42
------------
1. The "personal" filter test is brought up-to-date with
recommendations from the Sieve specification: (a) The list
of non-personal From: addresses now includes "listserv",
"majordomo", and "*-request"; (b) If the message contains
any header line starting with "List=-" it is treated as
non-personal.
2. The Sieve functionality has been extended to support the
"copy" and "vacation" extensions, and comparison tests.
3. There is now an overall timeout for performing a callout
verification. It defaults to 4 times the callout timeout,
which applies to individual SMTP commands during the callout.
The overall timeout applies when there is more than one
host that can be tried. The timeout is checked before trying
the next host. This prevents very long delays if there are
a large number of hosts and all are timing out (e.g. when
the network connections are timing out). The value of the
overall timeout can be changed by specifying an additional
sub-option for "callout", called "maxwait". For example:
verify = sender/callout=5s,maxwait=20s
4. Changes to the "personal" filter test:
(1) The list of non-personal local parts in From: addresses
has been extended to include "listserv", "majordomo",
"*-request", and "owner-*", taken from the Sieve specification
recommendations.
(2) If the message contains any header line starting with
"List-" it is treated as non-personal.
(3) The test for "circular" in the Subject: header line
has been removed because it now seems ill-conceived.
5. The autoreply transport has a new option called never_mail.
This is an address list. If any run of the transport
creates a message with a recipient that matches any item
in the list, that recipient is quietly discarded. If all
recipients are discarded, no message is created.
Version 4.40
------------
The documentation is up-to-date for the 4.40 release. What
follows here is a brief list of the new features that have been
added since 4.30.
1. log_incoming_interface affects more log lines.
2. New ACL modifier "control = submission".
3. CONFIGURE_OWNER can be set at build time to define an
alternative owner for the configuration file, in addition
to root and exim.
4. Added expansion variables $body_zerocount, $recipient_data,
and $sender_data.
5. The time of last modification of the "new" subdirectory is
now used as the "mailbox time last read" when there is a
quota error for a maildir delivery.
6. The special item "+ignore_unknown" may now appear in host
lists.
7. The special domain-matching patterns @mx_any, @mx_primary,
and @mx_secondary can now be followed by "/ignore=<ip list>".
8. New expansion conditions: match_domain, match_address,
match_local_part, lt, lti, le, lei, gt, gti, ge, and new
expansion operators time_interval, eval10, and base62d.
9. New lookup type called "iplsearch".
10. New log selectors ident_timeout, tls_certificate_verified,
queue_time, deliver_time, outgoing_port, return_path_on_delivery.
11. New global options smtp_active_hostname and tls_require_ciphers.
12. Exinext has -C and -D options.
13. "domainlist_cache" forces caching of an apparently variable
list.
14. For compatibility with Sendmail, the command line option
-prval:sval is equivalent to -oMr rval -oMs sval.
15. New callout options use_sender and use_postmaster for use
when verifying recipients.
16. John Jetmore's "exipick" utility has been added to the
distribution.
17. The TLS code now supports CRLs.
18. The dnslookup router and the dnsdb lookup type now support
the use of SRV records.
19. The redirect router has a new option called qualify_domain.
20. exigrep's output now also includes lines that are not
related to any particular message, but which do match the
pattern.
21. New global option write_rejectlog. If it is set false, Exim
no longer writes anything to the reject log.
Changes in exim-exiscan since 4.34_22
27 - Changed algorithm of header_pos_middle to add headers
before the first header which is NOT Received: or
Resent-*:.
exim 4.42 ---------------------------------------------------
26 - Fixed header corruption when using header_pos_top.
(Thanks to Michael Deutschmann).
- Fixed headers being added before any Received-SPF:
header when using header_pos_middle (Thanks to
Michael Deutschmann).
- DrWeb malware support: Add flag to treat .eml file
as plain mail (Thanks to Alex Miller).
25 - Fixed include location of libspf2 headers.
- Added support for Kaspersky AV Version 5 (aveserver).
- Added expansion of av_scanner global variable
when it starts with a dollar sign. This is useful
for implementing multiple malware scanners.
- Added support for adding ACL headers at the beginning
and in the "middle" of the message header block.
(This is a preliminary solution, see comment in SPF
section of exiscan-acl-spec).
24 - Changed documentation to reflect libspf_alt->libspf2
name change.
- Upgraded included SRS patch to 0.3 (author Miles Wilton).
Also added a small doc chapter for SRS.
- Brightmail: put notes for users of new 6.x version in the
docs (search for "BMI6.x").
BMI Version 6 should work OK, an upgraded SDK is now on
Brightmail's download site.
exim 4.41 ----------------------------------------------------
23 - Added patch to support SRS in the redirect router, done
by Miles Wilton. Please check http://srs.mirtol.com/
for more information.
- Fixed the negation operator for SPF support. Thanks
to Michael Haardt for sending a patch.
- Increased buffer size for large SA reports (when using
custom SA rulesets).
- Increased buffer size for large BMI verdicts. Should now
handle large number of recipients gracefully.
diffstat:
doc/CHANGES | 5 ++++-
mail/exim-exiscan/Makefile | 4 ++--
mail/exim/Makefile.common | 4 ++--
mail/exim/distinfo | 21 ++++++++++-----------
mail/exim/patches/patch-aa | 18 +++++++++---------
mail/exim/patches/patch-ab | 4 ++--
mail/exim/patches/patch-ac | 4 ++--
mail/exim/patches/patch-ad | 4 ++--
mail/exim/patches/patch-ae | 4 ++--
mail/exim/patches/patch-af | 31 -------------------------------
10 files changed, 35 insertions(+), 64 deletions(-)
diffs (236 lines):
diff -r 5e5d5cf56634 -r 46ecdfcb7fda doc/CHANGES
--- a/doc/CHANGES Fri Aug 27 10:10:50 2004 +0000
+++ b/doc/CHANGES Fri Aug 27 10:46:52 2004 +0000
@@ -1,4 +1,4 @@
-$NetBSD: CHANGES,v 1.7014 2004/08/27 10:10:50 tron Exp $
+$NetBSD: CHANGES,v 1.7015 2004/08/27 10:47:51 abs Exp $
Changes to the packages collection and infrastructure in 2004:
@@ -4065,3 +4065,6 @@
Added ipw-firmware-1.0 [lukem 2004-08-27]
Updated xosd to 2.2.10 [adam 2004-08-27]
Updated wmbiff to 0.4.25 [tron 2004-08-27]
+ Updated exim to 4.42 [abs 2004-08-27]
+ Updated exim-exiscan to 4.42_27 [abs 2004-08-27]
+
diff -r 5e5d5cf56634 -r 46ecdfcb7fda mail/exim-exiscan/Makefile
--- a/mail/exim-exiscan/Makefile Fri Aug 27 10:10:50 2004 +0000
+++ b/mail/exim-exiscan/Makefile Fri Aug 27 10:46:52 2004 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.13 2004/08/13 15:10:48 abs Exp $
+# $NetBSD: Makefile,v 1.14 2004/08/27 10:46:52 abs Exp $
DISTNAME= exim-${EXIM_VERSION}
PKGNAME= exim-exiscan-${EXIM_VERSION}_${EXISCAN_VERSION}
@@ -10,7 +10,7 @@
CONFLICTS+= exim-[0-9]*
-EXISCAN_VERSION=22
+EXISCAN_VERSION=27
PATCH_SITES= http://duncanthrax.net/exiscan-acl/
PATCHFILES= exiscan-acl-${EXIM_VERSION}-${EXISCAN_VERSION}.patch.bz2
diff -r 5e5d5cf56634 -r 46ecdfcb7fda mail/exim/Makefile.common
--- a/mail/exim/Makefile.common Fri Aug 27 10:10:50 2004 +0000
+++ b/mail/exim/Makefile.common Fri Aug 27 10:46:52 2004 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile.common,v 1.14 2004/08/27 06:29:08 jlam Exp $
+# $NetBSD: Makefile.common,v 1.15 2004/08/27 10:46:52 abs Exp $
MASTER_SITES= ftp://ftp.exim.org/pub/exim/exim4/ \
ftp://ftp.csx.cam.ac.uk/pub/software/email/exim/exim4/ \
@@ -10,7 +10,7 @@
MAKE_ENV+= SSLBASE=${SSLBASE:Q}
-EXIM_VERSION= 4.34
+EXIM_VERSION= 4.42
EXTRACT_SUFX= .tar.bz2
diff -r 5e5d5cf56634 -r 46ecdfcb7fda mail/exim/distinfo
--- a/mail/exim/distinfo Fri Aug 27 10:10:50 2004 +0000
+++ b/mail/exim/distinfo Fri Aug 27 10:46:52 2004 +0000
@@ -1,12 +1,11 @@
-$NetBSD: distinfo,v 1.19 2004/06/06 22:10:51 abs Exp $
+$NetBSD: distinfo,v 1.20 2004/08/27 10:46:52 abs Exp $
-SHA1 (exim-4.34.tar.bz2) = ed77428c4dfa4718c1bd4ddb5de2d99d37cec2de
-Size (exim-4.34.tar.bz2) = 1328742 bytes
-SHA1 (exiscan-acl-4.34-22.patch.bz2) = 30134a680d0bb863b8d7241cefbd838582f3d671
-Size (exiscan-acl-4.34-22.patch.bz2) = 76947 bytes
-SHA1 (patch-aa) = 07ce41a5ee3a29c29a05ad556f5fef53a5a2285b
-SHA1 (patch-ab) = 5134367d16c56ad7c2820393e102a9aad73511c8
-SHA1 (patch-ac) = 48160bf4ef4379f4b4ce5dafeb33c85ddcfde65c
-SHA1 (patch-ad) = 6323899062b33ec34610fd93dfc181cdc9d7f369
-SHA1 (patch-ae) = b806857f4fa0c9d4c3603e8ee5f9c4419e643956
-SHA1 (patch-af) = 483fe63aa9c6b524ab61a53a20968e5a7fa3d095
+SHA1 (exim-4.42.tar.bz2) = 54e9ccd295cd30994761acf3ecbb335517507e0d
+Size (exim-4.42.tar.bz2) = 1360728 bytes
+SHA1 (exiscan-acl-4.42-27.patch.bz2) = 7783a4202bbefaed1576d2b6d538c7e582ae76da
+Size (exiscan-acl-4.42-27.patch.bz2) = 83039 bytes
+SHA1 (patch-aa) = 56747e91fc9065bb564bc65f12633d52a6fff385
+SHA1 (patch-ab) = efdbfd11ade8b7b6ab6a5b0511a1322abbc4c3d7
+SHA1 (patch-ac) = e6bb70132b655862cf4af4e344dfe9509d7b8106
+SHA1 (patch-ad) = ab2df5e42b993937d124f50510f70d594bafff4a
+SHA1 (patch-ae) = d65205adf8c2ae8a874825e68c163014c13d1628
diff -r 5e5d5cf56634 -r 46ecdfcb7fda mail/exim/patches/patch-aa
--- a/mail/exim/patches/patch-aa Fri Aug 27 10:10:50 2004 +0000
+++ b/mail/exim/patches/patch-aa Fri Aug 27 10:46:52 2004 +0000
@@ -1,6 +1,6 @@
-$NetBSD: patch-aa,v 1.9 2004/06/04 00:10:34 reed Exp $
+$NetBSD: patch-aa,v 1.10 2004/08/27 10:46:52 abs Exp $
---- Local/Makefile.pkgsrc.orig 2004-06-03 13:36:01.871153448 -0700
+--- Local/Makefile.pkgsrc.orig 2004-08-27 11:35:33.000000000 +0100
+++ Local/Makefile.pkgsrc
@@ -98,7 +98,7 @@
# /usr/local/sbin. The installation script will try to create this directory,
@@ -69,7 +69,7 @@
-@@ -386,9 +386,9 @@ FIXED_NEVER_USERS=root
+@@ -406,9 +406,9 @@ FIXED_NEVER_USERS=root
# included in the Exim binary. You will then need to set up the run time
# configuration to make use of the mechanism(s) selected.
@@ -82,7 +82,7 @@
#------------------------------------------------------------------------------
-@@ -466,10 +466,11 @@ HEADERS_CHARSET="ISO-8859-1"
+@@ -486,10 +486,11 @@ HEADERS_CHARSET="ISO-8859-1"
# leave these settings commented out.
# This setting is required for any TLS support (either OpenSSL or GnuTLS)
@@ -96,7 +96,7 @@
# Uncomment these settings if you are using GnuTLS
# USE_GNUTLS=yes
-@@ -533,7 +534,7 @@ HEADERS_CHARSET="ISO-8859-1"
+@@ -553,7 +554,7 @@ HEADERS_CHARSET="ISO-8859-1"
# %s. This will be replaced by one of the strings "main", "panic", or "reject"
# to form the final file names. Some installations may want something like this:
@@ -105,7 +105,7 @@
# which results in files with names /var/log/exim_mainlog, etc. The directory
# in which the log files are placed must exist; Exim does not try to create
-@@ -663,7 +664,8 @@ ZCAT_COMMAND=/usr/bin/zcat
+@@ -683,7 +684,8 @@ ZCAT_COMMAND=/usr/bin/zcat
# this setting. See the manual section entitled "Use of tcpwrappers" in the
# chapter on building and installing Exim.
#
@@ -115,7 +115,7 @@
#
# You may well also have to specify a local "include" file and an additional
# library for TCP wrappers, so you probably need something like this:
-@@ -719,11 +721,11 @@ SYSTEM_ALIASES_FILE=/etc/aliases
+@@ -739,11 +741,11 @@ SYSTEM_ALIASES_FILE=/etc/aliases
# haven't got Perl, Exim will still build and run; you just won't be able to
# use those utilities.
@@ -132,7 +132,7 @@
#------------------------------------------------------------------------------
-@@ -917,7 +919,7 @@ TMPDIR="/tmp"
+@@ -937,7 +939,7 @@ TMPDIR="/tmp"
# (process id) to a file so that it can easily be identified. The path of the
# file can be specified here. Some installations may want something like this:
@@ -141,7 +141,7 @@
# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
# using the name "exim-daemon.pid".
-@@ -953,3 +955,7 @@ TMPDIR="/tmp"
+@@ -973,3 +975,7 @@ TMPDIR="/tmp"
# SUPPORT_MOVE_FROZEN_MESSAGES=yes
# End of EDITME for Exim 4.
diff -r 5e5d5cf56634 -r 46ecdfcb7fda mail/exim/patches/patch-ab
--- a/mail/exim/patches/patch-ab Fri Aug 27 10:10:50 2004 +0000
+++ b/mail/exim/patches/patch-ab Fri Aug 27 10:46:52 2004 +0000
@@ -1,6 +1,6 @@
-$NetBSD: patch-ab,v 1.10 2004/05/07 17:47:32 abs Exp $
+$NetBSD: patch-ab,v 1.11 2004/08/27 10:46:52 abs Exp $
---- OS/Makefile-Default.orig Wed May 5 11:08:35 2004
+--- OS/Makefile-Default.orig 2004-08-26 15:09:59.000000000 +0100
+++ OS/Makefile-Default
@@ -69,7 +69,7 @@ PERL_COMMAND=/usr/bin/perl
diff -r 5e5d5cf56634 -r 46ecdfcb7fda mail/exim/patches/patch-ac
--- a/mail/exim/patches/patch-ac Fri Aug 27 10:10:50 2004 +0000
+++ b/mail/exim/patches/patch-ac Fri Aug 27 10:46:52 2004 +0000
@@ -1,6 +1,6 @@
-$NetBSD: patch-ac,v 1.7 2004/05/07 17:47:32 abs Exp $
+$NetBSD: patch-ac,v 1.8 2004/08/27 10:46:52 abs Exp $
---- OS/Makefile-NetBSD-a.out.orig Wed May 5 11:08:35 2004
+--- OS/Makefile-NetBSD-a.out.orig 2004-08-26 15:09:59.000000000 +0100
+++ OS/Makefile-NetBSD-a.out
@@ -1,7 +1,7 @@
# Exim: OS-specific make file for NetBSD (a.out/COFF object format)
diff -r 5e5d5cf56634 -r 46ecdfcb7fda mail/exim/patches/patch-ad
--- a/mail/exim/patches/patch-ad Fri Aug 27 10:10:50 2004 +0000
+++ b/mail/exim/patches/patch-ad Fri Aug 27 10:46:52 2004 +0000
@@ -1,6 +1,6 @@
-$NetBSD: patch-ad,v 1.6 2004/05/07 17:47:32 abs Exp $
+$NetBSD: patch-ad,v 1.7 2004/08/27 10:46:52 abs Exp $
---- OS/Makefile-NetBSD.orig Wed May 5 11:08:35 2004
+--- OS/Makefile-NetBSD.orig 2004-08-26 15:09:59.000000000 +0100
+++ OS/Makefile-NetBSD
@@ -1,7 +1,7 @@
# Exim: OS-specific make file for NetBSD (ELF object format)
diff -r 5e5d5cf56634 -r 46ecdfcb7fda mail/exim/patches/patch-ae
--- a/mail/exim/patches/patch-ae Fri Aug 27 10:10:50 2004 +0000
+++ b/mail/exim/patches/patch-ae Fri Aug 27 10:46:52 2004 +0000
@@ -1,6 +1,6 @@
-$NetBSD: patch-ae,v 1.6 2004/05/07 17:47:32 abs Exp $
+$NetBSD: patch-ae,v 1.7 2004/08/27 10:46:52 abs Exp $
---- scripts/exim_install.orig Wed May 5 11:08:35 2004
+--- scripts/exim_install.orig 2004-08-26 15:09:59.000000000 +0100
+++ scripts/exim_install
@@ -79,6 +79,8 @@ if [ "${SYSTEM_ALIASES_FILE}" = "" ] ; t
SYSTEM_ALIASES_FILE=/etc/aliases
diff -r 5e5d5cf56634 -r 46ecdfcb7fda mail/exim/patches/patch-af
--- a/mail/exim/patches/patch-af Fri Aug 27 10:10:50 2004 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,31 +0,0 @@
-$NetBSD: patch-af,v 1.2 2004/05/07 17:47:32 abs Exp $
-
---- src/daemon.c.orig Wed May 5 11:08:35 2004
-+++ src/daemon.c
-@@ -756,6 +756,7 @@ daemon_go(void)
- {
- int *listen_sockets = NULL;
- int listen_socket_count = 0;
-+int fd;
- ip_address_item *addresses = NULL;
-
- /* If any debugging options are set, turn on the D_pid bit so that all
-@@ -1082,9 +1083,17 @@ if (background_daemon)
- {
- log_close_all(); /* Just in case anything was logged earlier */
- search_tidyup(); /* Just in case any were used in reading the config. */
-- close(0); /* Get rid of stdin/stdout/stderr */
-+ /* Get rid of stdin/stdout/stderr
-+ close(0);
- close(1);
- close(2);
-+ */
-+ /* Instead of closing, dup them to /dev/null */
-+ fd= open( "/dev/null", O_RDWR );
-+ dup2( fd, 0 );
-+ dup2( fd, 1 );
-+ dup2( fd, 2 );
-+ if( fd > 2 ) close( fd );
- log_stderr = NULL; /* So no attempt to copy paniclog output */
-
- /* If the parent process of this one has pid == 1, we are re-initializing the
Home |
Main Index |
Thread Index |
Old Index