pkgsrc-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: pkg/38586: cdrtools- can't burn CDRs

The following reply was made to PR pkg/38586; it has been noted by GNATS.

From: Antti Kantee <>
To: Thomas Klausner <>
Subject: Re: pkg/38586: cdrtools- can't burn CDRs
Date: Tue, 6 May 2008 12:02:01 +0300

 On Tue May 06 2008 at 10:45:02 +0200, Thomas Klausner wrote:
 > On Mon, May 05, 2008 at 04:10:00PM +0000, wrote:
 > > Trying to burn a cdr with cdrtools- fails.  Downgrading the 
 > > package to cdrtools- makes burning work again.
 > Works for me on amd64/4.99.62.
 > What is the error that you see?
 Bummer, I was hoping to avoid making another coaster ;)
 cdrecord appears to write for a while, and when I examine the disk
 physically, I see that something has been written.  Here's what I see
 on the screen:
 === SNIP ===
 cdrecord: No write mode specified.
 cdrecord: Asuming -sao mode.
 cdrecord: If your drive does not accept -sao, try -tao.
 cdrecord: Future versions of cdrecord may have different drive dependent 
 Cdrecord-ProDVD-ProBD-Clone 2.01.01a38 (i386-unknown-netbsd4.99.42) Copyright 
(C) 1995-2008 Jörg Schilling
 TOC Type: 1 = CD-ROM
 cdrecord: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK 
limits.cdrecord: Permission denied. WARNING: Cannot set priority using 
 cdrecord: WARNING: This causes a high risk for buffer underruns.
 scsidev: '/dev/rcd0d'
 devname: '/dev/rcd0d'
 scsibus: -2 target: -2 lun: -2
 Using libscg version 'schily-0.9'.
 cdrecord: Warning: using inofficial libscg transport code version 
(frueauf-scsi-bsd.c-1.44nb1 '@(#)scsi-bsd.c   1.44 07/03/25 Copyright 1997 J. 
 SCSI buffer size: 61440
 atapi: 1
 Device type    : Removable CD-ROM
 Version        : 0
 Response Format: 2
 Capabilities   : 
 Vendor_info    : 'Optiarc '
 Identifikation : 'DVD RW AD-7543A '
 Revision       : '1-00'
 Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
 Current: CD-R
 Profile: DVD+R/DL 
 Profile: DVD+R 
 Profile: DVD+RW 
 Profile: DVD-R/DL layer jump recording 
 Profile: DVD-R/DL sequential recording 
 Profile: DVD-RW sequential recording 
 Profile: DVD-RW restricted overwrite 
 Profile: DVD-RAM 
 Profile: DVD-R sequential recording 
 Profile: DVD-ROM 
 Profile: CD-RW 
 Profile: CD-R (current)
 Profile: CD-ROM (current)
 Profile: Removable Disk 
 Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
 Driver flags   : MMC-3 SWABAUDIO BURNFREE 
 Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
 Drive buf size : 890880 = 870 KB
 FIFO size      : 4194304 = 4096 KB
 Track 01: data   239 MB        
 Total size:      274 MB (27:12.74) = 122456 sectors
 Lout start:      275 MB (27:14/56) = 122456 sectors
 Current Secsize: 2048
 ATIP info from disk:
   Indicated writing power: 4
 Disk Is not unrestricted
 Disk Is not erasable
   Disk sub type: Medium Type A, low Beta category (A-) (2)
   ATIP start of lead in:  -12508 (97:15/17)
   ATIP start of lead out: 359845 (79:59/70)
 Disk type:    Short strategy type (Phthalocyanine or similar)
 Manuf. index: 22
 Manufacturer: Ritek Co.
     Capacity  Blklen/Sparesz.  Format-type  Type
            0             2048         0x00  No Media Present or Unknown 
 Blocks total: 359845 Blocks current: 359845 Blocks remaining: 237389
 cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
 cdrecord: WARNING: This causes a high risk for buffer underruns.
 Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session.
 Last chance to quit, starting real write    0 seconds. Operation starts.
 Waiting for reader process to fill input buffer ... input buffer ready.
 BURN-Free is ON.
 Turning BURN-Free off
 Performing OPC...
 Sending CUE sheet...
 cdrecord: WARNING: Drive returns wrong startsec (0) using -150
 Writing pregap for track 1 at -150
 Starting new track at sector: 0
 Track 01:    1 of  239 MB written (fifo 100%) [buf 100%]   0.3x.cdrecord: 
Input/output error. write_g1: scsi sendcmd: retryable error
 CDB:  2A 00 00 00 02 94 00 00 1E 00
 status: 0x2 (CHECK CONDITION)
 Sense Bytes: F0 00 03 00 00 00 CE 0A 00 00 00 00 0C 08 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00
 Sense Key: 0x3 Medium Error, Segment 0
 Sense Code: 0x0C Qual 0x08 (write error - recovery failed) Fru 0x0
 Sense flags: Blk 206 (valid) 
 resid: 61440
 cmd finished after 0.051s timeout 200s
 write track data: error after 1351680 bytes
 cdrecord: A write error occured.
 cdrecord: Please properly read the error message above.
 Writing  time:   41.579s
 Average write speed  60.7x.
 Min drive buffer fill was 100%
 Fixating time:    0.001s
 cdrecord: fifo had 90 puts and 23 gets.
 cdrecord: fifo was 0 times empty and 12 times full, min fill was 85%.
 === SNIP ====
 Antti Kantee <>                     Of course he runs 
     "la qualité la plus indispensable du cuisinier est l'exactitude"

Home | Main Index | Thread Index | Old Index