Subject: auich doesn't work properly in 4.0_RC2
To: None <netbsd-users@netbsd.org>
From: Alexey Lebedev <alexey@zhtw.org.ru>
List: netbsd-users
Date: 10/12/2007 19:55:27
This is a multi-part message in MIME format.
--------------020100010809080500030409
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Hello!

Today updated my NetBSD to 4.0_RC2 from 3.1 and then my audio card 
stopped working properly. Mplayer and all other programs that make sound 
hold after half a second. In case of mplayer I can seek to another 
position and hear sound another half a second. Xine and other programs 
just hold.

I attached my dmesg.boot. Any ideas how to work this out?


Alexey Lebedev.


--------------020100010809080500030409
Content-Type: text/plain;
 name="dmesg.boot"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.boot"

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_RC2 (PUTRAJAYA) #0: Fri Oct 12 18:26:58 MYT 2007
	avl@putrajaya:/usr/home/avl/netbsd/obj/sys/arch/i386/compile/PUTRAJAYA
total memory = 1246 MB
rbus: rbus_min_start set to 0x80000000
avail memory = 1216 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd527
PCI BIOS rev. 2.1 found at 0xfd789
pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
PCI IRQ Routing Table rev. 1.0 found at 0xfdd10, size 160 bytes (8 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge compatible)
------------------------------------------
  device vendor product pin PIRQ IRQ stage
------------------------------------------
000:02:0 0x8086 0x3582   A  0x00   6  0    already assigned
000:29:0 0x8086 0x24c2   A  0x00   6  0    already assigned
000:29:1 0x8086 0x24c4   B  0x03   6  0    already assigned
000:29:7 0x8086 0x24cd   D  0x07  10  0    already assigned
000:31:1 0x8086 0x24ca   A  0x02   6  1    fixed up
000:31:3 0x8086 0x24c3   B  0x01  10  0    already assigned
000:31:5 0x8086 0x24c5   B  0x01  10  0    already assigned
000:31:6 0x8086 0x24c6   B  0x01  10  0    already assigned
002:01:0 0x104c 0xac50   A  0x04  10  0    already assigned
002:02:0 0x10ec 0x8139   A  0x03   6  0    already assigned
002:04:0 0x8086 0x4220   A  0x01  10  0    already assigned
------------------------------------------
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005800
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005808
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005810
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x0000580c
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x4df00000
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Dothan) (686-class), 1594.91 MHz, id 0x6d6
cpu0: features afe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
cpu0: features afe9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9f9bf<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 1.60GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1340 mV) 1600 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1600 1400 1200 1000 800 600
cpu0: 64 page colors
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <TOSQCI,L10     ,20020511>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 6
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 6
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 6
LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 10
LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 6
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 10
LNKB: BIOS IRQ 10 for 0.31.INTB is invalid
LNKD: ACPI: Found matching pin for 1.2.INTA at func 0: 6
LNKB: ACPI: Found matching pin for 1.4.INTA at func 0: 10
LNKB: BIOS IRQ 10 for 1.4.INTA is invalid
LNKE: ACPI: Found matching pin for 1.1.INTA at func 0: 10
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0C02 at acpi0 not configured
INT0800 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0303 at acpi0 not configured
SYN1009 at acpi0 not configured
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
PNP0C0B at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C0B at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 68.0C
acpitz0: active cooling level 1: 61.0C
acpitz0: critical 110.0C passive 56.0C
apm0 at acpi0: Power Management spec V1.2
acpiacad0: AC adapter online.
acpibat0: battery info: TOSHIBA   , LION, PA3420U-1BRS, 13512
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855GM Host-Hub Controller (rev. 0x02)
agp0 at pchb0: detected 32636k stolen memory
agp0: aperture at 0xe8000000, size 0x8000000
Intel 82855GM GMCH Memory Controller (miscellaneous system, revision 0x02) at pci0 dev 0 function 1 not configured
Intel 82855GM GMCH Configuration Process (miscellaneous system, revision 0x02) at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0: Intel 82855GM GMCH Integrated Graphics Device (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82855GM GMCH Integrated Graphics Device (miscellaneous display, revision 0x02) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x03)
uhci0: interrupting at irq 6
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x03)
uhci1: interrupting at irq 6
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x03)
ehci0: interrupting at irq 10
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: wrong number of companions (3 != 2)
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x83)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
cbb0 at pci1 dev 1 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x02)
rtk0 at pci1 dev 2 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 6
rtk0: Ethernet address 00:c0:9f:83:79:1b
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
iwi0 at pci1 dev 4 function 0: Intel PRO/Wireless LAN 2200BG Mini-PCI Adapter (rev. 0x05)
LNKB: Picked IRQ 9 with weight 0
iwi0: interrupting at irq 9
iwi0: 802.11 address 00:12:f0:01:be:2b
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: interrupting at irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801DB ISA Bridge (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801DB SMBus Controller (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 9
auich0: ac97: Conexant CXT48 codec; reserved, headphone, 18 bit DAC, 18 bit ADC, no 3D stereo
auich0: ac97: ext id a04<AC97_23,AMAP,SPDIF>
Intel 82801DB AC97 Modem Controller (modem communications, revision 0x03) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 5.9
pms0: Palm detect, Multi-finger
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
audio0 at auich0: full duplex, independent
Kernelized RAIDframe activated
acpiacad0: AC adapter online.
wd0 at atabus0 drive 0: <WDC WD1200BEVE-00WZT0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-830S, , 1.80> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--------------020100010809080500030409--