Subject: NetBSD 3.1 / GENERIC.MP (forgot attachment)
To: None <,>
From: Christopher Beck <>
List: netbsd-users
Date: 01/22/2007 08:07:14
This is a multi-part message in MIME format.
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

I have got a Sun U60 Creator 3D workstation with 2 USparcIIi CPUs and i
wanted to get NetBSD 3.1 running on it with SMP.
GENERIC boots and the System is usable, but GENERIC.MP doesn't work. I
attached all information.
I think there is a illegal instruction made on CPU0 couses that watchdog
reset. Has anyone got such kind of problems? Does anyone know a solution?
Sincerly Yours
Ch. Beck

Content-Type: text/plain;
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;

{0} ok boot disk                                                     
Resetting ...                                                                   
screen not found.                                                               
Can't open input device.                                                        
Keyboard not present.  Using ttya for input and output.                         
Sun Ultra 60 UPA/PCI (2 X UltraSPARC-II 296MHz), No Keyboard                    
OpenBoot 3.17, 896 MB memory installed, Serial #11083071.                       
Ethernet address 8:0:20:a9:1d:3f, Host ID: 80a91d3f.                            
Rebooting with command: boot disk                                    
Boot device: /pci@1f,4000/scsi@3/disk@0,0  File and args:            
NetBSD IEEE 1275 Bootblock                                                      
>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.8                               
>> (, Tue Oct 31 09:01:03 UTC 2006)                         
loadfile: reading header                                                        
elf64_exec: Booting /pci@1f,4000/scsi@3/disk@0,0:a/                   
symbols @ 0xfef54500 227+433440+264626 start=0x1000000                          
chain: calling OF_chain(800000, d748, 1000000, fff83a80, 18)                    
console is /pci@1f,4000/ebus@1/se@14,400000:a                                   
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005        
    The NetBSD Foundation, Inc.  All rights reserved.                           
Copyright (c) 1982, 1986, 1989, 1991, 1993                                      
    The Regents of the University of California.  All rights reserved.          
NetBSD 3.1 (GENERIC.MP) #2: Mon Jan 22 07:38:42 CET 2007                        
total memory = 896 MB                                                           
avail memory = 865 MB                                                           
bootpath: /pci@1f,4000/scsi@3,0/disk@0,0                                        
mainbus0 (root): SUNW,Ultra-60: hostid 80a91d3f                                 
cpu0 at mainbus0: SUNW,UltraSPARC-II @ 295.991 MHz, version 0 FPU               
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)      
cpu1 at mainbus0: SUNW,UltraSPARC-II @ 295.991 MHz, version 0 FPU               
cpu1: 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)      
psycho0 at mainbus0 addr 0xfffb4000                                             
SUNW,psycho: impl 0, version 4: ign 7c0 bus range 0 to 0; PCI bus 0             
DVMA map: fe000000 to ffffe000                                                  
IOTSB: 20eb0000 to 20eb8000                                                     
pci0 at psycho0                                                                 
pci0: i/o space, memory space enabled                                           
ebus0 at pci0 dev 1 function 0                                                  
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01                               
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c0033
power at ebus0 addr 724000-724003 not configured                                
SUNW,pll at ebus0 addr 504000-504002 not configured                             
sc at ebus0 addr 500000-500007 not configured                                   
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2                                
sabtty0 at sab0 port 0: console i/o                                             
sabtty1 at sab0 port 1                                                          
com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo                 
kbd0 at com0                                                                    
com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo                 
ms0 at com1                                                                     
wsmouse0 at ms0 mux 0                                                           
lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ipl 34           
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not cod
clock0 at ebus0 addr 0-1fff: mk48t59                                            
flashprom at ebus0 addr 0-fffff not configured                                  
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-7220A
audio0 at audiocs0: full duplex                                                 
hme0 at pci0 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1                  
hme0: interrupting at ivec 3021                                                 
hme0: Ethernet address 08:00:20:a9:1d:3f                                        
qsphy0 at hme0 phy 1: QS6612 10/100 media interface, rev. 1                     
qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto                    
esiop0 at pci0 dev 3 function 0: Symbios Logic 53c875 (ultra-wide scsi)         
esiop0: using on-board RAM                                                      
esiop0: interrupting at ivec 20                                                 
scsibus0 at esiop0: 16 targets, 8 luns per target                               
esiop1 at pci0 dev 3 function 1: Symbios Logic 53c875 (ultra-wide scsi)         
esiop1: using on-board RAM                                                      
esiop1: interrupting at ivec 26                                                 
scsibus1 at esiop1: 16 targets, 8 luns per target                               
psycho1 at mainbus0 addr 0xfffc6000                                             
SUNW,psycho: impl 0, version 4: ign 7c0 bus range 128 to 128; PCI bus 128       
pci1 at psycho1                                                                 
pci1: i/o space, memory space enabled                                           
timer0 at mainbus0 addr 0xfff9fc00 irq vectors 7ec and 7ed                      
pcons at mainbus0 not configured                                                
wskbd0 at kbd0 mux 1                                                            
kbd0: reset failed                                                              
Kernelized RAIDframe activated                                                  
scsibus0: waiting 2 seconds for devices to settle...                            
scsibus1: waiting 2 seconds for devices to settle...                            
sd0 at scsibus0 target 0 lun 0: <IBM, DDRS34560SUN4.2G, S98E> disk fixed        
sd0: 4094 MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sect x 8385121 sectors      
sd0: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers, tagged queueing   
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, XM6201TASUN32XCD, 1103> cdrom removabe
cd0: sync (100.00ns offset 16), 8-bit (10.000MB/s) transfers                    
root on sd0a dumps on sd0b                                                      
root file system type: ffs                                                      
cpu0: booting secondary processors:                                             
cpu2 now spinning idle (waited 1 iterations)                                    
trap type 0x10: pc=8 npc=c pstate=820006<PRIV,IE>                               
kernel trap 10: illegal instruction                                             
cpu0 paused.                                                                    
Stopped in pid 1.1 (init) at                                                    
SIR Reset                                                                       
Watchdog Reset                                                                  
Externally Initiated Reset                                                      
{2} ok