I did not know that attachments were scrubbed.  Here's what was
missing...

<<carlos>>
<<nvllvmmagnvmingenivmsinemixtvradementiae>>

NetBSD 3.1.0_PATCH (GENERIC) #0: Fri Jan  5 13:17:51 EST 2007
	carlos@leviathan:/mnt/redstripe/old_3.1/root/usr/src/sys/arch/amd64/
compile/obj/GENERIC
total memory = 2047 MB
avail memory = 1953 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (TYAN     S2882       )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 270, 1993.94 MHz
cpu0: features:
f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,B28,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 1 MB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: not started
cpu2 at mainbus0: apid 2 (application processor)
cpu2: not started
cpu3 at mainbus0: apid 3 (application processor)
cpu3: not started
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type ISA
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 5 (I/O APIC)
ioapic1: pa 0xfebff000, version 11, 4 pins
ioapic2 at mainbus0 apid 6 (I/O APIC)
ioapic2: pa 0xfebfe000, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 6 function 0: Advanced Micro Devices AMD8111 I/O Hub
(rev. 0x07)
pci1 at ppb0 bus 3
pci1: i/o space, memory space enabled
ohci0 at pci1 dev 0 function 0: Advanced Micro Devices AMD8111 USB
Host Controller (rev. 0x0b)
ohci0: interrupting at ioapic0 pin 19 (irq 10)
ohci0: OHCI version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1: Advanced Micro Devices AMD8111 USB
Host Controller (rev. 0x0b)
ohci1: interrupting at ioapic0 pin 19 (irq 10)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
satalink0 at pci1 dev 5 function 0
satalink0: Silicon Image SATALink 3114 (rev. 0x02)
satalink0: 33MHz PCI bus
satalink0: bus-master DMA support present
satalink0: using ioapic0 pin 19 (irq 10) for native-PCI interrupt
atabus0 at satalink0 channel 0
atabus1 at satalink0 channel 1
atabus2 at satalink0 channel 2
atabus3 at satalink0 channel 3
vga0 at pci1 dev 6 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
fxp0 at pci1 dev 8 function 0: i82550 Ethernet, rev 16
fxp0: interrupting at ioapic0 pin 18 (irq 11)
fxp0: Ethernet address 00:e0:81:41:74:c2
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 7 function 0
pcib0: Advanced Micro Devices AMD8111 LPC Controller (rev. 0x05)
viaide0 at pci0 dev 7 function 1
viaide0: Advanced Micro Devices AMD8111 IDE Controller (rev. 0x03)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus4 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
Advanced Micro Devices AMD8111 SMBus Controller (SMBus serial bus,
revision 0x02) at pci0 dev 7 function 2 not configured
amdpm0 at pci0 dev 7 function 3: Advanced Micro Devices AMD8111 ACPI
Controller (rev. 0x05)
iic at amdpm0 not configured
amdpm0: random number generator enabled (apprx. 57ms)
ppb1 at pci0 dev 10 function 0: Advanced Micro Devices AMD8131 PCI-X
Tunnel (rev. 0x12)
pci2 at ppb1 bus 2
pci2: memory space enabled
bge0 at pci2 dev 9 function 0: Broadcom BCM5704C Dual Gigabit Ethernet
bge0: interrupting at ioapic1 pin 0 (irq 15)
bge0: ASIC BCM5704 A3 (0x2003), Ethernet address 00:e0:81:41:75:00
brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy0: using BCM5704 DSP patch
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1 at pci2 dev 9 function 1: Broadcom BCM5704C Dual Gigabit Ethernet
bge1: interrupting at ioapic1 pin 1 (irq 9)
bge1: ASIC BCM5704 A3 (0x2003), Ethernet address 00:e0:81:41:75:01
brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy1: using BCM5704 DSP patch
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
aapic0 at pci0 dev 10 function 1: Advanced Micro Devices AMD8131 IO
Apic (rev. 0x01)
ppb2 at pci0 dev 11 function 0: Advanced Micro Devices AMD8131 PCI-X
Tunnel (rev. 0x12)
pci3 at ppb2 bus 1
pci3: i/o space, memory space enabled
3ware 9550SX series: (rev. 0x00)
twa0 at pci3 dev 3 function 0: 3ware Apache
twa0: interrupting at ioapic2 pin 0 (irq 15)
64 bit addressing supported for scatter/gather list
twa0: 8 ports, Firmware FE9X 3.04.00.005, BIOS BE9X 3.04.00.002
twa0: Monitor BL9X 3.02.00.001, PCB Rev 032 , Achip 1.70    , Pchip 1.60
twa0: port 0: WDC WD3200YS-01PGB0                      305245 MB
twa0: port 1: WDC WD3200YS-01PGB0                      305245 MB
twa0: port 2: WDC WD3200YS-01PGB0                      305245 MB
twa0: port 3: WDC WD3200YS-01PGB0                      305245 MB
twa0: port 4: WDC WD3200YS-01PGB0                      305245 MB
twa0: port 5: WDC WD3200YS-01PGB0                      305245 MB
twa0: port 6: WDC WD3200YS-01PGB0                      305245 MB
twa0: port 7: WDC WD3200YS-01PGB0                      305245 MB
twa0: AMCC    9550SX-8LP DISK 3.04D3148279946A0B0018E1
ld0 at twa0 unit 0
ld0: 2086 GB, 272321 cyl, 255 head, 63 sec, 512 bytes/sect x
4374845440 sectors
aapic1 at pci0 dev 11 function 1: Advanced Micro Devices AMD8131 IO
Apic (rev. 0x01)
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration
(rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev.
0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev.
0x00)
pchb4 at pci0 dev 25 function 0
pchb4: Advanced Micro Devices AMD64 HyperTransport configuration
(rev. 0x00)
pchb5 at pci0 dev 25 function 1
pchb5: Advanced Micro Devices AMD64 Address Map configuration (rev.
0x00)
pchb6 at pci0 dev 25 function 2
pchb6: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb7 at pci0 dev 25 function 3
pchb7: Advanced Micro Devices AMD64 Miscellaneous configuration (rev.
0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic0: enabling
ioapic1: enabling
ioapic2: enabling
Kernelized RAIDframe activated
satalink0: port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0satalink0: port 1: device present, speed: 1.5Gb/s
: <WDC WD3200KS-00PFB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448
sectors
satalink0: port 2: device present, speed: 1.5Gb/s
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
wd1 at atabus1 drive 0: <WDC WD3200KS-00PFB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448
sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
wd2 at atabus2 drive 0: <WDC WD3200KS-00PFB0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448
sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
atapibus0 at atabus4: 2 targets
cd0 at atapibus0 drive 0: <PIONEER DVD-RW  DVR-107D, CLDL001215WL,
1.03> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)
(using DMA)
uhub2 at uhub1 port 1
uhub2: Mitsumi Electric Hub in Apple Extended USB Keyboard, class
9/0, rev 1.10/1.22, addr 2
uhub2: 3 ports with 2 removable, bus powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22,
addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22,
addr 3, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub1 port 2 configuration 1 interface 0
uhidev2: American Power Conversion Smart-UPS 750 FW:651.12.D USB FW:
4.2, rev 1.10/0.06, addr 4, iclass 3/0
uhidev2: 54 report ids
uhid2 at uhidev2 reportid 1: input=0, output=0, feature=1
uhid3 at uhidev2 reportid 2: input=0, output=0, feature=1
uhid4 at uhidev2 reportid 3: input=0, output=0, feature=1
uhid5 at uhidev2 reportid 4: input=0, output=0, feature=1
uhid6 at uhidev2 reportid 5: input=0, output=0, feature=1
uhid7 at uhidev2 reportid 6: input=0, output=0, feature=2
uhid8 at uhidev2 reportid 7: input=2, output=0, feature=2
uhid9 at uhidev2 reportid 8: input=3, output=0, feature=3
uhid10 at uhidev2 reportid 9: input=0, output=0, feature=2
uhid11 at uhidev2 reportid 10: input=0, output=0, feature=2
uhid12 at uhidev2 reportid 11: input=0, output=0, feature=2
uhid13 at uhidev2 reportid 12: input=1, output=0, feature=1
uhid14 at uhidev2 reportid 13: input=2, output=0, feature=2
uhid15 at uhidev2 reportid 14: input=0, output=0, feature=2
uhid16 at uhidev2 reportid 15: input=0, output=0, feature=1
uhid17 at uhidev2 reportid 16: input=0, output=0, feature=2
uhid18 at uhidev2 reportid 17: input=0, output=0, feature=1
uhid19 at uhidev2 reportid 18: input=0, output=0, feature=2
uhid20 at uhidev2 reportid 19: input=0, output=0, feature=3
uhid21 at uhidev2 reportid 20: input=1, output=0, feature=1
uhid22 at uhidev2 reportid 21: input=2, output=0, feature=2
uhid23 at uhidev2 reportid 22: input=1, output=0, feature=1
uhid24 at uhidev2 reportid 23: input=1, output=0, feature=1
uhid25 at uhidev2 reportid 24: input=0, output=0, feature=2
uhid26 at uhidev2 reportid 25: input=0, output=0, feature=2
uhid27 at uhidev2 reportid 26: input=2, output=0, feature=2
uhid28 at uhidev2 reportid 27: input=1, output=0, feature=1
uhid29 at uhidev2 reportid 28: input=1, output=0, feature=1
uhid30 at uhidev2 reportid 29: input=0, output=0, feature=2
uhid31 at uhidev2 reportid 30: input=0, output=0, feature=2
uhid32 at uhidev2 reportid 31: input=0, output=0, feature=2
uhid33 at uhidev2 reportid 32: input=0, output=0, feature=2
uhid34 at uhidev2 reportid 33: input=1, output=0, feature=1
uhid35 at uhidev2 reportid 34: input=1, output=0, feature=1
uhid36 at uhidev2 reportid 35: input=2, output=0, feature=2
uhid37 at uhidev2 reportid 36: input=2, output=0, feature=2
uhid38 at uhidev2 reportid 37: input=2, output=0, feature=2
uhid39 at uhidev2 reportid 38: input=2, output=0, feature=2
uhid40 at uhidev2 reportid 39: input=0, output=0, feature=2
uhid41 at uhidev2 reportid 40: input=0, output=0, feature=2
uhid42 at uhidev2 reportid 41: input=0, output=0, feature=3
uhid43 at uhidev2 reportid 42: input=0, output=0, feature=2
uhid44 at uhidev2 reportid 43: input=0, output=0, feature=2
uhid45 at uhidev2 reportid 44: input=0, output=0, feature=2
uhid46 at uhidev2 reportid 45: input=2, output=0, feature=2
uhid47 at uhidev2 reportid 46: input=0, output=0, feature=1
uhid48 at uhidev2 reportid 47: input=0, output=0, feature=1
uhid49 at uhidev2 reportid 48: input=0, output=0, feature=1
uhid50 at uhidev2 reportid 49: input=0, output=0, feature=1
uhid51 at uhidev2 reportid 50: input=0, output=0, feature=1
uhid52 at uhidev2 reportid 51: input=2, output=0, feature=2
uhid53 at uhidev2 reportid 52: input=0, output=0, feature=1
uhid54 at uhidev2 reportid 53: input=0, output=0, feature=2
uhid55 at uhidev2 reportid 54: input=1, output=0, feature=1
raid0: RAID Level 1
raid0: Components: /dev/wd1e /dev/wd2e component2[**FAILED**]
raid0: Total Sectors: 584176512 (285242 MB)
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
warning: no /dev/console
dma read modebits: 0x     3fe
dma read modebits: 0x     3fe
dma read modebits: 0x     3fe
dma read modebits: 0x     3fe
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
raid0: Error re-writing parity!

On Jan 12, 2007, at 1:56 AM, the carlos wrote:

> Greetings all.  Long-time reader, first time poster.
>
> I can't seem to get my Silicon Image SI-3114 sata controller
> (satalink driver) to play nicely with the 3ware 9550SX-8-LP (twa) in
> netbsd 3.1 amd64.  If I disable one or the other in the BIOS, the
> lone device works fine*.  Everything works* in 3.0 (presumably
> because there is no twa driver) and the 4.0beta LiveCD.  If both are
> enabled under 3.1, I get a "fatal protection fault in supervisor
> mode" hang, and the system reboots.
>
> My motherboard is a Tyan Thunder K8S-D Pro (S2882-D).
>
> with the recently patched 3.1 GENERIC kernel, I have a few moments to
> capture dmesg, etc. before the following comes up.
> with the recently patched 3.1 GENERIC.MP kernel, the following comes
> up instantly, then reboots.
>
> fatal protection fault in supervisor mode
> trap type 4 code 38b rip ffffffff8043e01b cs 8 rflags 10206 cr2
> 52f000 cpl 7 rs
> p ffff800046cabe00
> panic: trap
> syncing disks... satalink0:1:0: lost interrupt
> 	type: ata tc_bcount: 16384 tc_skip: 0
>
> Attached is the dmesg output for the GENERIC kernel.  Any help would
> be appreciated!
>
> <<carlos>>
> <<nvllvmmagnvmingenivmsinemixtvradementiae>>
>
> *Please see my other post, "Hardware RAID Wrong Size"...