--Apple-Mail-1--58090091
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=US-ASCII;
	delsp=yes;
	format=flowed

I recently purchased a Kingston USB->IrDA adapter for use with  
another device I own here, and NetBSD sees it as a ugen(4) device. I  
installed comm/birda from pkgsrc, but I get errors that ircomm cannot  
open /dev/irframe0. If I try and change the device to irframe1, same  
deal. Permissions are fine, so I'm presuming a problem with the  
communication between the device and the kernel. Attached is the  
dmesg output.


--Apple-Mail-1--58090091
Content-Transfer-Encoding: 7bit
Content-Type: application/octet-stream;
	x-unix-mode=0644;
	name=dmesg.boot
Content-Disposition: attachment;
	filename=dmesg.boot

NetBSD 3.0.1 (GENERIC) #0: Thu Jul 13 23:43:47 UTC 2006
	builds@b3.netbsd.org:/home/builds/ab/netbsd-3-0-1-RELEASE/i386/200607131826Z-obj/home/builds/ab/netbsd-3-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 65132 KB
avail memory = 55444 KB
BIOS32 rev. 0 found at 0xf0520
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 451.05 MHz, id 0x672
cpu0: features 387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 387f9ff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0672-0001-4CCF-FFD1-9087
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xe7800000, size 0x400000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcib0 at pci0 dev 4 function 0
pcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixide0 at pci0 dev 4 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: device disabled (at device)
uhci0 at pci0 dev 4 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01)
uhci0: interrupting at irq 15
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB (PIIX4) Power Management Controller (miscellaneous bridge, revision 0x02) at pci0 dev 4 function 3 not configured
pdcsata0 at pci0 dev 9 function 0
pdcsata0: Promise PDC20375 SATA150 controller (rev. 0x02)
pdcsata0: interrupting at irq 15
pdcsata0: bus-master DMA support present
atabus0 at pdcsata0 channel 0
atabus1 at pdcsata0 channel 1
atabus2 at pdcsata0 channel 2
fxp0 at pci0 dev 10 function 0: i82550 Ethernet, rev 12
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:02:b3:2b:18:cd
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 11 function 0: i82558 Ethernet, rev 5
fxp1: interrupting at irq 9
fxp1: May need receiver lock-up workaround
fxp1: Ethernet address 00:50:8b:01:be:dc
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 12 function 0: Matrox MGA Millennium 2064W ("Storm") (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Genesyslogic USB Mass Storage Device, rev 2.00/0.02, addr 2
umass0: using ATAPI over Bulk-Only
atapibus0 at umass0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST, CD-RW GCE-8525B, 1.03> cdrom removable
ugen0 at uhub0 port 2
ugen0: Kingsun CO. USB to IRDA, rev 1.10/1.00, addr 3
wd0 at atabus0 drive 0: <Maxtor 6Y080M0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 78167 MB, 158816 cyl, 16 head, 63 sec, 512 bytes/sect x 160086528 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(pdcsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--Apple-Mail-1--58090091
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=US-ASCII;
	format=flowed



--
Jeremy Tregunna
jtregunna@blurgle.ca



--Apple-Mail-1--58090091--