In message <20051018104207.500F13D85@string1.ciencias.uniovi.es>, Igor Sobrado writes:
> 
> I will play with ACPI options next weekend and post changes as a
> reference to other PowerEdge users if I get it working.

Ok, I have a configuration that seems to work... I will do some
tests (reading a lot of files and copying them to the internal HDD)
on the CD drive this weekend.

Now, the GENERIC.local file:

------------------------------------------
#	$NetBSD: GENERIC.local,v 1.1 1996/09/09 16:37:08 mycroft Exp $
#
#	GENERIC.local -- local additions to the GENERIC configuration
#

options 	CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=9600
options 	CONS_OVERRIDE	# Always use above! independent of boot info

ioapic* at mainbus?

#options 	ACPIVERBOSE	# verbose ACPI device autoconfig messages

options 	MPACPI		# configure CPUs and APICs using ACPI
				# (acpi at mainbus must also be enabled)
#options 	MPACPI_SCANPCI	# find PCI roots using MPACPI

acpi0 		at mainbus0

options 	ACPI_PCI_FIXUP		# PCI interrupt routing via ACPI
#options 	ACPI_ACTIVATE_DEV	# If set, activate inactive devices
#options 	ACPICA_PEDANTIC		# force strict conformance to the Spec.
#options	ACPI_DISABLE_ON_POWEROFF	# disable acpi on power off

# ACPI devices
#acpiacad* 	at acpi?		# ACPI AC Adapter
#acpibat* 	at acpi?		# ACPI Battery
#acpibut* 	at acpi?		# ACPI Button
#acpiec* 	at acpi?		# ACPI Embedded Controller
#acpilid* 	at acpi?		# ACPI Lid Switch
#acpitz* 	at acpi?		# ACPI Thermal Zone

#com* 		at acpi?		# Serial communications interface
#fdc* 		at acpi?		# Floppy disk controller
#lpt* 		at acpi?		# Parallel port
#npx*		at acpi?		# Math coprocessor
#pckbc*  	at acpi?		# PC keyboard controller
#wss* 		at acpi?		# NeoMagic 256AV in wss mode
------------------------------------------

And the output of dmesg...

------------------------------------------
NetBSD 2.0.2 (GENERIC) #5: Tue Oct 18 13:11:18 CEST 2005
	operator@fundphys.ciencias.uniovi.es:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 511 MB
avail memory = 492 MB
BIOS32 rev. 0 found at 0xfda74
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 851.98 MHz, id 0x68a
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <INTEL ,TR440BXA,20010924>, AslId <AMI ,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0303 at acpi0 not configured
PNP0700 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0501 at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0E at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (AGP disabled) (rev. 0x03)
pchb0: fixing Idle/Pipeline DRAM Leadoff Timing
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
fxp0 at pci0 dev 12 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:02:b3:b1:09:3a
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 13 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at irq 5
fxp1: Ethernet address 00:02:b3:b1:09:3b
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 15 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com1: console
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <WDC WD200BB-18CAA0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19073 MB, 38752 cyl, 16 head, 63 sec, 512 bytes/sect x 39062500 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CD-224E, , 1.7A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
fxp0: Microcode loaded: int delay: 1000 usec, max bundle: 6
fxp1: Microcode loaded: int delay: 1000 usec, max bundle: 6
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
------------------------------------------

I will carefully add ACPI devices next weekend to see if something
breaks.  As I said, I want *at least* ACPI buttons working!

Hope this configuration file will be helpful for other PowerEdge 350
owners...

Igor.