Subject: Can't get my soundcard working (AC97)
To: None <netbsd-users@netbsd.org>
From: None <salex@hackerhippie.de>
List: netbsd-users
Date: 05/24/2005 17:42:03
Hi Mailinglist!
It would be nice if you help me getting my soundcard working on NetBSD
2.0.2.
That's what dmesg | grep auich says:
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: can't map codec i/o space
My whole dmesg and my whole kernel configuration is at the end of the
mail.
audioctl -a
audioctl: /dev/audioctl0: Device not configured
mixerctl -a
mixerctl: /dev/mixer0: Device not configured
cat /dev/urandom > /dev/audio
zsh: device not configured: /dev/audio
cat /dev/urandom > /dev/sound
zsh: device not configured: /dev/sound
Dmesg:
NetBSD 2.0.2_STABLE (ERIS) #1: Mon May 23 14:51:27 CEST 2005
root@eris.home:/usr/src/sys/arch/i386/compile/ERIS
total memory = 509 MB
avail memory = 493 MB
BIOS32 rev. 0 found at 0xfd600
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 2523.21 MHz, id 0xf27
cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi: activated PNP0C0F
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A): ACPI Battery (Control Method)
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not
configu
red
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
pckbc1 at acpi0 (PNP0303-1): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PNP0F13-0): aux port
pckbc2: irq 12
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
lpt1 at acpi0 (PNP0400)
lpt1: io 0x378-0x37f irq 7
com0 at acpi0 (PNP0501)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz1 at acpi0: ACPI Thermal Zone
acpitz1: unable to get polling interval; using default of 30.0s
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System SiS 646 Host Bridge (rev. 0x00)
agp0 at pchb0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C201 (rev.
0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M9 (rev.
0x
01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using
wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-6 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev.
0x04)
fwohci0 at pci0 dev 2 function 3: Silicon Integrated System product
0x7007
(rev. 0x00)
fwohci0: interrupting at irq 11
fwohci0: OHCI 1.0, 00:01:24:10:32:0e:b1:f3, 400Mb/s, 2048 max_rec, 4
ir_ctx
, 6 it_ctx
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated System 96X UDMA6645DX IDE controller (rev.
0x00
)
siside0: bus-master DMA support present
siside0: primary channel configured to compatibility mode
siside0: primary channel interrupting at irq 14
atabus0 at siside0 channel 0
siside0: secondary channel configured to compatibility mode
siside0: secondary channel interrupting at irq 15
atabus1 at siside0 channel 1
Silicon Integrated System product 0x7013 (modem communications, revision
0x
a0) at pci0 dev 2 function 6 not configured
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: can't map codec i/o space
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB
hos
t controller (rev. 0x0f)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB
hos
t controller (rev. 0x0f)
ohci1: interrupting at irq 11
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci0 dev 3 function 2: Silicon Integrated System 5597/5598 USB
hos
t controller (rev. 0x0f)
ohci2: interrupting at irq 11
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0
host
controller (rev. 0x00)
ehci0: interrupting at irq 11
ehci0: EHCI version ff.ff
ehci0: wrong number of companions (15 != 3)
ehci0: init failed, error=13
sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x91
sip0: interrupting at irq 11
sip0: Ethernet address 00:00:e2:9a:1a:4e
icsphy0 at sip0 phy 1: ICS1893 10/100 media interface, rev. 1
icsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci0 dev 9 function 0: ENE Technology, Inc. CB1420 Cardbus
Controll
er (rev. 0x01)
cbb0: NOT USED because of unconfigured interrupt
cbb1 at pci0 dev 9 function 1: ENE Technology, Inc. CB1420 Cardbus
Controll
er (rev. 0x01)
cbb1: NOT USED because of unconfigured interrupt
isa at pcib0 not configured
isa0 at mainbus0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL-DF) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc1 drive 0: density unknown
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..5..10
pcic0: using irq 3 for socket events
raidattach: Asked for 8 units
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
fw at fwohci0 not configured
pcic_chip_socket_enable: status c
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: ACROX Combo Mouse, rev 1.00/5.50, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <TOSHIBA MK4018GAS>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160
sector
s
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
DMA
data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QSI CD-RW/DVD-ROM SBW-242, , UX10> cdrom
removab
le
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
DMA
data transfers)
pcic_wait_ready: ready never happened, status = 0c
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying smbfs...
mountroot: trying coda...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
set{u,g}id pid 854 (netstat) was invoked by uid 1000 ppid 110 (gaim)
with f
d 0 closed
acpibat0: battery info: , Lion, Bat12Cell, 236
pcic_chip_socket_enable: status c
pcic_wait_ready: ready never happened, status = 0c
pcic_chip_socket_enable: status c
pcic_wait_ready: ready never happened, status = 0c
pcic_chip_socket_enable: status c
pcic_wait_ready: ready never happened, status = 0c
kernel configuration:
# $NetBSD: GENERIC,v 1.595.2.11 2004/08/30 09:52:37 tron Exp $
#
# GENERIC machine description file
#
# This machine description file is used to generate the default NetBSD
# kernel. The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page. For further information about kernel options
# for this architecture, see the options(4) man page. For an
explanation
# of each device driver in this file see the section 4 man page for the
# device.
include "arch/i386/conf/std.i386"
options INCLUDE_CONFIG_FILE # embed config file in kernel
binary
#ident "GENERIC-$Revision: 1.595.2.11 $"
maxusers 32 # estimated number of users
# CPU support. At least one is REQUIRED.
options I386_CPU
options I486_CPU
options I586_CPU
options I686_CPU
# CPU-related options.
options MATH_EMULATE # floating point emulation
options VM86 # virtual 8086 emulation
options USER_LDT # user-settable LDT; used by WINE
# insert delay no-ops in interrupts; recommended on very old machines
#options PIC_DELAY
options MTRR # memory-type range register syscall
support
# doesn't work with MP just yet..
#options PERFCTRS # performance-monitoring counters
support
# delay between "rebooting ..." message and hardware reset, in
milliseconds
#options CPURESET_DELAY=2000
# This option allows you to force a serial console at the specified
# I/O address. see console(4) for details.
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
# you don't want the option below ON iff you are using the
# serial console option of the new boot strap code.
#options CONS_OVERRIDE # Always use above! independent of boot
info
# The following options override the memory sizes passed in from the
boot
# block. Use them *only* if the boot block is unable to determine the
correct
# values. Note that the BIOS may *correctly* report less than 640k of
base
# memory if the extended BIOS data area is located at the top of base
memory
# (as is the case on most recent systems).
#options REALBASEMEM=639 # size of base memory (in KB)
#options REALEXTMEM=15360 # size of extended memory (in
KB)
# Standard system options
options INSECURE # disable kernel security levels - X
needs this
options RTC_OFFSET=60 # hardware clock is this many mins. west
of GMT
options NTP # NTP phase/frequency locked loop
#options NO_TSC_TIME # Don't use TSC microtime, even if
available.
# Improves time behavior under VMware.
options KTRACE # system call tracing via ktrace(1)
options SYSTRACE # system call vetting via systrace(1)
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
#options SEMMNI=10 # number of semaphore identifiers
#options SEMMNS=60 # number of semaphores in system
#options SEMUME=10 # max number of undo entries per process
#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V-like memory sharing
#options SHMMAXPGS=2048 # 2048 pages is the default
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
options LKM # loadable kernel modules
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in
kernel
# Beep when it is safe to power down the system (requires sysbeep)
options BEEP_ONHALT
# Some tunable details of the above feature (default values used below)
#options BEEP_ONHALT_COUNT=3 # Times to beep
#options BEEP_ONHALT_PITCH=1500 # Default frequency (in Hz)
#options BEEP_ONHALT_PERIOD=250 # Default duration (in msecs)
# Enable experimental buffer queue strategy for better responsiveness
under
# high disk I/O load. Likely stable but not yet the default.
#options NEW_BUFQ_STRATEGY
# Diagnostic/debugging support options
options DIAGNOSTIC # expensive kernel consistency checks
options DEBUG # expensive debugging checks/support
options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
#options KGDB # remote debugger
#options
KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
options COMPAT_09 # NetBSD 0.9
options COMPAT_10 # NetBSD 1.0
options COMPAT_11 # NetBSD 1.1
options COMPAT_12 # NetBSD 1.2, 386BSD, and BSDI
options COMPAT_13 # NetBSD 1.3, 386BSD, and BSDI
options COMPAT_14 # NetBSD 1.4
options COMPAT_15 # NetBSD 1.5
options COMPAT_16 # NetBSD 1.6
options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
options COMPAT_386BSD_MBRPART # recognize old partition ID
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not
recommended.
options COMPAT_OSSAUDIO # OSS (Voxware) audio driver
compatibility
options COMPAT_SVR4 # binary compatibility with SVR4
options COMPAT_IBCS2 # binary compatibility with SCO and ISC
options COMPAT_LINUX # binary compatibility with Linux
options COMPAT_FREEBSD # binary compatibility with FreeBSD
#options COMPAT_MACH # binary compatibility with Mach
binaries
#options COMPAT_DARWIN # binary compatibility with Darwin
binaries
#options EXEC_MACHO # exec MACH-O binaries
options COMPAT_PECOFF # kernel support to run Win32 apps
# File systems
file-system FFS # UFS
file-system EXT2FS # second extended file system (linux)
file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network File System client
file-system NTFS # Windows/NT file system (experimental)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
file-system CODA # Coda File System; also needs vcoda
(below)
file-system SMBFS # experimental - CIFS; also needs nsmb
(below)
# File system options
options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independent support
options SOFTDEP # FFS soft updates support.
options NFSSERVER # Network File System server
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append
and
# immutable) behave as system flags.
# Networking options
#options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
options IPSEC # IP security
options IPSEC_ESP # IP security (encryption part; define
w/IPSEC)
options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
options NS # XNS
#options NSIP # XNS tunneling over IP
options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
options CCITT,LLC,HDLC # X.25
options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for
PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP
(requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
#options TCP_DEBUG # Record last TCP_NDEBUG packets with
SO_DEBUG
#options ALTQ # Manipulate network interfaces' output
queues
#options ALTQ_BLUE # Stochastic Fair Blue
#options ALTQ_CBQ # Class-Based Queueing
#options ALTQ_CDNR # Diffserv Traffic Conditioner
#options ALTQ_FIFOQ # First-In First-Out Queue
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
#options ALTQ_HFSC # Hierarchical Fair Service Curve
#options ALTQ_LOCALQ # Local queueing discipline
#options ALTQ_PRIQ # Priority Queueing
#options ALTQ_RED # Random Early Detection
#options ALTQ_RIO # RED with IN/OUT
#options ALTQ_WFQ # Weighted Fair Queueing
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options ACPIVERBOSE # verbose ACPI device autoconfig
messages
options EISAVERBOSE # verbose EISA device autoconfig
messages
options MIIVERBOSE # verbose PHY autoconfig messages
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
options PCMCIAVERBOSE # verbose PCMCIA configuration messages
options SCSIVERBOSE # human readable SCSI error messages
options USBVERBOSE # verbose USB device autoconfig messages
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
#options PNPBIOSDEBUG # more fulsome PnP BIOS debugging
messages
options I2OVERBOSE # verbose I2O driver messages
options MCAVERBOSE # verbose MCA device autoconfig messages
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
#
# wscons options
#
# builtin terminal emulations
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options WS_KERNEL_FG=WSCOL_GREEN
options WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
options WSDISPLAY_DEFAULTSCREENS=7
# use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
# work around a hardware bug that loaded fonts don't work; found on ATI
cards
#options VGA_CONSOLE_ATI_BROKEN_FONTSEL
# the following enables some functions to get mouse console support.
# if you want a really secure system, it may be better not to enable
them,
# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
options WSDISPLAY_CHARFUNCS # mouse console support
# console scrolling support.
options WSDISPLAY_SCROLLSUPPORT
# enable VGA raster mode capable of displaying multilingual text on
console
#options VGA_RASTERCONSOLE
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
mainbus0 at root
cpu* at mainbus?
#ioapic* at mainbus?
# Doesn't do anything yet.
#p64h2apic* at pci? dev? function? # P64H2 IOxAPIC
#apm0 at mainbus0 # Advanced power management
# Tuning for power management, see apm(4) for more details.
#options APM_NO_IDLE # Don't call BIOS CPU idle
function
#options APM_V10_ONLY # Use only the APM 1.0 calls
#options APM_NO_POWEROFF # Don't power off on halt(8)
#options APM_POWER_PRINT # Print stats on the console
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
# Basic Bus Support
# Advanced Control and Power Interface
# This option can be used to retrieve CPU and APIC information.
# that I/O APICs can be used if ACPI is enabled below.
# To use the I/O APIC(s), enable the ioapic line above.
#options MPBIOS # configure CPUs and APICs using MPBIOS
#options MPBIOS_SCANPCI # find PCI roots using MPBIOS
#options MPACPI # configure CPUs and APICs using ACPI
# (acpi at mainbus must also be enabled)
#options MPACPI_SCANPCI # find PCI roots using MPACPI
acpi0 at mainbus0
options ACPI_PCI_FIXUP # PCI interrupt routing via ACPI
options ACPI_ACTIVATE_DEV # If set, activate inactive
devices
#options ACPICA_PEDANTIC # force strict conformance to
the Spec.
#options ACPI_DISABLE_ON_POWEROFF # disable acpi on power
off
# ACPI devices
acpiacad* at acpi? # ACPI AC Adapter
acpibat* at acpi? # ACPI Battery
acpibut* at acpi? # ACPI Button
acpiec* at acpi? # ACPI Embedded Controller
acpilid* at acpi? # ACPI Lid Switch
acpitz* at acpi? # ACPI Thermal Zone
# Mainboard devices
com* at acpi? # Serial communications
interface
fdc* at acpi? # Floppy disk controller
lpt* at acpi? # Parallel port
npx* at acpi? # Math coprocessor
pckbc* at acpi? # PC keyboard controller
#wss* at acpi? # NeoMagic 256AV in wss mode
# Sony Vaio jog dial
#spic* at acpi? # Sony Programmable I/O
Controller
#wsmouse* at spic?
# Toshiba Libretto devices
#vald* at acpi?
# Plug-and-Play BIOS and attached devices
pnpbios* at mainbus?
# mainboard audio chips
ess* at pnpbios? index ? # ESS AudioDrive
sb* at pnpbios? index ? # NeoMagic 256AV in sb mode
wss* at pnpbios? index ? # NeoMagic 256AV in wss mode
ym* at pnpbios? index ? # OPL3-SA3
# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA
Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and
there
# will be no com0. A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
com* at pnpbios? index ? # serial ports
# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
lpt* at pnpbios? index ? # parallel ports
pckbc* at pnpbios? index ? # PC keyboard/mouse controller
fdc* at pnpbios? index ? # floppy controller
# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide* at pnpbios? index ?
# PCI bus support
pci* at mainbus? bus ?
#(# pci* at pchb? bus ?
pci* at ppb? bus ?
# Configure PCI using BIOS information
#options PCIBIOS # PCI BIOS support
#options PCIBIOSVERBOSE # PCI BIOS verbose info
#options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or
11
#options PCIBIOS_INTR_GUESS # see pcibios(4)
#options PCIINTR_DEBUG # super-verbose PCI interrupt
fixup
# System Controllers
#(# elansc* at pci? dev ? function ? # AMD Elan SC520 System
Controller
# PCI bridges
pchb* at pci? dev ? function ? # PCI-Host bridges
pceb* at pci? dev ? function ? # PCI-EISA bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
ichlpcib* at pci? dev ? function ? # Intel ICH PCI-ISA w/ watchdog
support
#(# pcmb* at pci? dev ? function ? # PCI-MCA bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them
here
puc* at pci? dev ? function ? # PCI "universal" comm. cards
agp* at pchb?
# EISA bus support
eisa0 at mainbus?
eisa0 at pceb?
# ISA bus support
isa0 at mainbus?
#(# isa0 at pceb?
#(# isa0 at pcib?
isa0 at ichlpcib?
# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?
#(# pcmcia* at tcic? controller ? socket ?
# MCA bus support
mca0 at mainbus?
# ISA PCMCIA controllers
pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
#(# pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
#(# pcic2 at isa? port 0x3e4 iomem 0xe0000 iosiz 0x4000
#(# tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
# PCI PCMCIA controllers
pcic0 at pci? dev? function ?
# ISA Plug-and-Play bus support
isapnp0 at isa?
# ISA Plug-and-Play PCMCIA controllers
#(# pcic* at isapnp?
# CardBus bridge support
cbb* at pci? dev ? function ?
cardslot* at cbb?
# CardBus bus support
cardbus* at cardslot?
pcmcia* at cardslot?
# Coprocessor Support
# Math Coprocessor support
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
# Console Devices
# ISA console
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console
driver
# Keyboard layout configuration for pccons
#options FRENCH_KBD
#options FINNISH_KBD
options GERMAN_KBD
#options NORWEGIAN_KBD
# pccons-specific options:
#options XSERVER_DDB # PF12 gets you into DDB when X is
running
options XSERVER # X server support
# wscons
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
pms* at pckbc? # PS/2 mouse for wsmouse
#options PMS_DISABLE_POWERHOOK # Disable PS/2 reset on resume
#(# vga0 at isa?
vga* at pci? dev ? function ?
#(# pcdisplay0 at isa? # CGA, MDA, EGA, HGA
#machfb* at pci? dev ? function ? # ATI Mach64 framebuffer driver
wsdisplay* at vga? console ?
#(# wsdisplay* at pcdisplay? console ?
#wsdisplay* at machfb? console ?
wskbd* at pckbd? console ?
wsmouse* at pms? mux 0
pcppi0 at isa?
sysbeep0 at pcppi?
# Serial Devices
# PCI serial interfaces
#(# com* at puc? port ? # 16x50s on "universal"
comm boards
#(# cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial
boards
#(# cz* at pci? dev ? function ? # Cyclades-Z multi-port serial
boards
# ISA Plug-and-Play serial interfaces
#(# com* at isapnp? # Modems and serial
boards
# PCMCIA serial interfaces
#(# com* at pcmcia? function ? # Modems and serial
cards
#(# pcmcom* at pcmcia? function ? # PCMCIA multi-port
serial cards
#(# com* at pcmcom? slave ? # ...and the slave
devices
# CardBus serial interfaces
#com* at cardbus? dev ? function ? # Modems and serial cards
# ISA serial interfaces
#options COM_HAYESP # adds Hayes ESP serial board
support
#(# com0 at isa? port 0x3f8 irq 4 # Standard PC serial
ports
#(# com1 at isa? port 0x2f8 irq 3
#(# com2 at isa? port 0x3e8 irq 5
#com3 at isa? port 0x2e8 irq 9
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
#com* at ast? slave ?
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards
(BB2016)
#boca1 at isa? port 0x140 irq 5 # this line is also needed for
BB2016
#com* at boca? slave ?
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
#com* at tcom? slave ?
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
#com* at rtfps? slave ?
#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards
#addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S
#com* at addcom? slave ?
#moxa0 at isa? port 0x100 irq 5 # MOXA C168H serial card
(experimental)
#com* at moxa? slave ?
# MCA serial interfaces
#(# com* at mca? slot ? # 16x50s on comm boards
# Parallel Printer Interfaces
# PCI parallel printer interfaces
lpt* at puc? port ? # || ports on "universal" comm
boards
# ISA parallel printer interfaces
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
#(# lpt1 at isa? port 0x278
#(# lpt2 at isa? port 0x3bc
# Hardware monitors
# LM7[89] and compatible hardware monitors
#lm0 at isa? port 0x290 # other common ports: 0x280,
0x310
# VIA VT82C686A hardware monitor
#viapm* at pci? dev ? function ?
#viaenv* at viapm?
# I2O devices
#(# iop* at pci? dev ? function ? # I/O processor
#(# iopsp* at iop? tid ? # SCSI/FC-AL ports
#(# ld* at iop? tid ? # block devices
#(# dpti* at iop? tid 0 # DPT/Adaptec control
interface
# SCSI Controllers and Devices
# PCI SCSI controllers
#(# adv* at pci? dev ? function ? # AdvanSys 1200[A,B],
9xx[U,UA] SCSI
#(# adw* at pci? dev ? function ? # AdvanSys 9x0UW[D],
3940U[2,3]W SCSI
#(# ahc* at pci? dev ? function ? # Adaptec [23]94x,
aic78x0 SCSI
#(# ahd* at pci? dev ? function ? # Adaptec 29320, 39320
(aic790x) SCSI
#(# bha* at pci? dev ? function ? # BusLogic 9xx SCSI
#(# dpt* at pci? dev ? function ? # DPT
SmartCache/SmartRAID
#(# iha* at pci? dev ? function ? # Initio INIC-940/950
SCSI
#(# isp* at pci? dev ? function ? # Qlogic ISP [12]0x0
SCSI/FibreChannel
#(# mly* at pci? dev ? function ? # Mylex AcceleRAID and
eXtremeRAID
#(# mpt* at pci? dev ? function ? # LSI Fusion SCSI/FC
#(# njs* at pci? dev ? function ? # Workbit NinjaSCSI-32
#(# pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI
SCSI
#(# siop* at pci? dev ? function ? # Symbios 53c8xx SCSI
#(# esiop* at pci? dev ? function ? # Symbios 53c875 SCSI
and newer
#options SIOP_SYMLED # drive the act. LED in software
#(# trm* at pci? dev ? function ? # Tekram DC-395U/UW/F,
DC-315/U SCSI
# EISA SCSI controllers
#(# ahb* at eisa? slot ? # Adaptec 174[02] SCSI
#(# ahc* at eisa? slot ? # Adaptec 274x, aic7770
SCSI
#(# bha* at eisa? slot ? # BusLogic 7xx SCSI
#(# dpt* at eisa? slot ? # DPT EATA SCSI
#(# uha* at eisa? slot ? # UltraStor 24f SCSI
# PCMCIA SCSI controllers
#(# aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
#(# esp* at pcmcia? function ? # Qlogic ESP406/FAS408
SCSI
# ISA Plug-and-Play SCSI controllers
#(# aha* at isapnp? # Adaptec AHA-154[02
#(# aic* at isapnp? # Adaptec AHA-1520B
# ISA SCSI controllers
#(# adv0 at isa? port ? irq ? drq ? # AdvanSys APB-514[02]
SCSI
#(# aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI
#(# aha1 at isa? port 0x334 irq ? drq ?
#(# ahc0 at isa? port ? irq ? # Adaptec 284x SCSI
#(# aic0 at isa? port 0x340 irq 11 # Adaptec 152[02] SCSI
#(# bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI
#(# bha1 at isa? port 0x334 irq ? drq ?
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0 at isa? port 0x170 irq ? drq ? # DPT SmartCache/SmartRAID
#nca0 at isa? port 0x360 irq 15 # Port-mapped NCR 53C80
controller
#nca1 at isa? iomem 0xd8000 irq 5 # Memory-mapped controller
(T128, etc.)
#(# sea0 at isa? iomem 0xc8000 irq 5 # Seagate/Future Domain
SCSI
#(# uha0 at isa? port 0x330 irq ? drq ? # UltraStor [13]4f SCSI
#(# uha1 at isa? port 0x340 irq ? drq ?
#(# wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000
controllers
#(# wds1 at isa? port 0x358 irq 11 drq 5
# CardBus SCSI cards
#adv* at cardbus? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA]
SCSI
#ahc* at cardbus? dev ? function ? # Adaptec ADP-1480
#njs* at cardbus? dev ? function ? # Workbit NinjaSCSI-32
# MCA SCSI cards
#(# aha* at mca? slot ? # Adaptec AHA-1640
# SCSI bus support
scsibus* at scsi?
# SCSI devices
sd* at scsibus? target ? lun ? # SCSI disk drives
#(# st* at scsibus? target ? lun ? # SCSI tape drives
#(# cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
#(# ch* at scsibus? target ? lun ? # SCSI autochangers
#(# ses* at scsibus? target ? lun ? # SCSI Enclosure
Services devices
#(# ss* at scsibus? target ? lun ? # SCSI scanners
#(# uk* at scsibus? target ? lun ? # SCSI unknown
# RAID controllers and devices
#(# aac* at pci? dev ? function ? # Adaptec AAC family
#(# amr* at pci? dev ? function ? # AMI/LSI Logic MegaRAID
#(# cac* at eisa? slot ? # Compaq EISA array
controllers
#(# cac* at pci? dev ? function ? # Compaq PCI array
controllers
#(# icp* at pci? dev ? function ? # ICP-Vortex GDT & Intel
RAID
#(# mlx* at pci? dev ? function ? # Mylex DAC960 & DEC
SWXCR family
#(# mlx* at eisa? slot ? # Mylex DAC960 & DEC
SWXCR family
#(# twe* at pci? dev ? function ? # 3ware Escalade RAID
controllers
#(# ld* at aac? unit ? # logical disk devices
#(# ld* at amr? unit ?
#(# ld* at cac? unit ?
#(# ld* at icp? unit ?
#(# ld* at twe? unit ?
#(# ld* at mlx? unit ?
#(# icpsp* at icp? unit ? # SCSI pass-through
# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver
doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0001 # GENERIC pciide
driver
#(# acardide* at pci? dev ? function ? # Acard IDE controllers
#(# aceride* at pci? dev ? function ? # Acer Lab IDE
controllers
#(# artsata* at pci? dev ? function ? # Intel i31244 SATA
controller
#(# cmdide* at pci? dev ? function ? # CMD tech IDE
controllers
#(# cypide* at pci? dev ? function ? # Cypress IDE
controllers
#(# geodeide* at pci? dev ? function ? # AMD Geode IDE
controllers
#(# hptide* at pci? dev ? function ? # Triones/HighPoint IDE
controllers
#(# optiide* at pci? dev ? function ? # Opti IDE controllers
piixide* at pci? dev ? function ? # Intel IDE controllers
#(# pdcide* at pci? dev ? function ? # Promise IDE
controllers
#(# rccide* at pci? dev ? function ? # ServerWorks IDE
controllers
#(# satalink* at pci? dev ? function ? # SiI SATALink
controllers
siside* at pci? dev ? function ? # SiS IDE controllers
#(# slide* at pci? dev ? function ? # Symphony Labs IDE
controllers
#(# stpcide* at pci? dev ? function ? # STMicro STPC IDE
controllers
#(# viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE
controllers
# ISA Plug-and-Play IDE controllers
#(# wdc* at isapnp?
# PCMCIA IDE controllers
#(# wdc* at pcmcia? function ?
# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver
will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
#(# wdc0 at isa? port 0x1f0 irq 14 flags 0x00
#(# wdc1 at isa? port 0x170 irq 15 flags 0x00
# ATA (IDE) bus support
atabus* at ata?
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the
PIO
# mode to use, the next set of four bits the DMA mode and the third set
the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the
mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at atabus? drive ? flags 0x0000
# ATA RAID configuration support, as found on some Promise controllers.
pseudo-device ataraid
#(# ld* at ataraid? vendtype ? unit ?
# ATAPI bus support
atapibus* at atapi?
# ATAPI devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
#(# st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
#(# uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# Miscellaneous mass storage devices
# ISA floppy
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd* at fdc? drive ? # the drives themselves
# some machines need you to do this instead of fd*
#fd0 at fdc0 drive 0
# ISA CD-ROM devices
#mcd0 at isa? port 0x300 irq 10 # Mitsumi CD-ROM drives
# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0 at isa? port 0x308 irq 5 drq 1 # Archive and Wangtek QIC tape
drives
# MCA ESDI devices
#(# edc* at mca? slot ? # IBM ESDI Disk
Controllers
#(# ed* at edc?
# Network Interfaces
# PCI network interfaces
#(# an* at pci? dev ? function ? # Aironet PC4500/PC4800 (802.11)
ath* at pci? dev ? function ? # Atheros 5210/5211/5212 802.11
#(# atw* at pci? dev ? function ? # ADMtek ADM8211
(802.11)
#(# bce* at pci? dev ? function ? # Broadcom 4401 10/100
Ethernet
#(# bge* at pci? dev ? function ? # Broadcom 570x gigabit
Ethernet
#(# en* at pci? dev ? function ? # ENI/Adaptec ATM
#(# ep* at pci? dev ? function ? # 3Com 3c59x
#(# epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
#(# esh* at pci? dev ? function ? # Essential HIPPI card
#(# ex* at pci? dev ? function ? # 3Com 90x[BC]
#(# fpa* at pci? dev ? function ? # DEC DEFPA FDDI
#(# fxp* at pci? dev ? function ? # Intel EtherExpress PRO
10+/100B
#(# gsip* at pci? dev ? function ? # NS83820 Gigabit
Ethernet
#hme* at pci? dev ? function ? # Sun Microelectronics
STP2002-STQ
#(# le* at pci? dev ? function ? # PCnet-PCI Ethernet
#(# lmc* at pci? dev ? function ? # Lan Media Corp
SSI/HSSI/DS3
#(# mtd* at pci? dev ? function ? # Myson MTD803 3-in-1
Ethernet
#(# ne* at pci? dev ? function ? # NE2000-compatible Ethernet
#(# ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync
Serial
#(# pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet
#(# re* at pci? dev ? function ? # Realtek
8139C+/8169/8169S/8110S
#(# rtk* at pci? dev ? function ? # Realtek 8129/8139
#(# sf* at pci? dev ? function ? # Adaptec AIC-6915 Ethernet
sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
#(# skc* at pci? dev ? function ? # SysKonnect SK9821
Gigabit Ethernet
#(# sk* at skc? # SysKonnect SK9821 Gigabit
Ethernet
#(# ste* at pci? dev ? function ? # Sundance ST-201
Ethernet
#(# stge* at pci? dev ? function ? # Sundance/Tamarack
TC9021 Gigabit
#(# ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet
#(# tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
#(# tlp* at pci? dev ? function ? # DECchip 21x4x and
clones
#(# vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
wi* at pci? dev ? function ? # Intersil Prism Mini-PCI
(802.11b)
#(# wm* at pci? dev ? function ? # Intel 8254x gigabit
# EISA network interfaces
#(# ep* at eisa? slot ? # 3Com 3c579 Ethernet
#(# fea* at eisa? slot ? # DEC DEFEA FDDI
#(# tlp* at eisa? slot ? # DEC DE-425 Ethernet
# ISA Plug-and-Play network interfaces
#(# an* at isapnp? # Aironet 802.11
#(# ep* at isapnp? # 3Com 3c509 Ethernet
#(# fmv* at isapnp? # Fujitsu FMV-183
#(# le* at isapnp? # AMD PCnet-ISA Ethernet
#(# ne* at isapnp? # NE2000-compatible Ethernet
#(# tr* at isapnp? # IBM/3COM TROPIC Token-Ring
# PCMCIA network interfaces
#(# an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11)
#(# awi* at pcmcia? function ? # BayStack 650/660
(802.11FH/DS)
#(# cnw* at pcmcia? function ? # Xircom/Netwave
AirSurfer
#(# ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
#(# mbe* at pcmcia? function ? # MB8696x based Ethernet
#(# ne* at pcmcia? function ? # NE2000-compatible Ethernet
#(# ray* at pcmcia? function ? # Raytheon Raylink
(802.11)
#(# sm* at pcmcia? function ? # Megahertz Ethernet
# tr at pcmcia has problems with Cardbus bridges
#tr* at pcmcia? function ? # TROPIC based Token-Ring
wi* at pcmcia? function ? # Lucent/Intersil WaveLan IEEE
(802.11)
#(# xi* at pcmcia? function ? # Xircom CreditCard Ethernet
#(# mhzc* at pcmcia? function ? # Megahertz
Ethernet/Modem combo cards
#(# com* at mhzc?
#(# sm* at mhzc?
# ISA network interfaces
#(# ate0 at isa? port 0x2a0 irq ? # AT1700
#(# cs0 at isa? port 0x300 iomem ? irq ? drq ? # CS8900 Ethernet
#(# ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
#(# eg0 at isa? port 0x280 irq 9 # 3C505 ethernet cards
#(# el0 at isa? port 0x300 irq 9 # 3C501 ethernet cards
#(# ep* at isa? port ? irq ? # 3C509 ethernet cards
#(# ef0 at isa? port 0x360 iomem 0xd0000 irq 7 # 3C507
#(# ai0 at isa? port 0x360 iomem 0xd0000 irq 7 # StarLAN
#(# fmv0 at isa? port 0x2a0 irq ? # FMV-181/182
#(# ix0 at isa? port 0x300 irq 10 # EtherExpress/16
#(# iy0 at isa? port 0x360 irq ? # EtherExpress PRO 10
ISA
#(# lc0 at isa? port 0x320 iomem ? irq ? # DEC EtherWORKS III
(LEMAC)
#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5 # DEPCA
#le* at depca?
#(# nele0 at isa? port 0x320 irq 9 drq 7 # NE2100
#(# le* at nele?
#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1 # Riscom/N2 sync
serial
#(# bicc0 at isa? port 0x320 irq 10 drq 7 # BICC IsoLan
#(# le* at bicc?
#(# ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet
cards
#(# ne1 at isa? port 0x300 irq 10
#(# sm0 at isa? port 0x300 irq 10 # SMC91C9x Ethernet
#(# tr0 at isa? port 0xa20 iomem 0xd8000 irq ? # IBM TROPIC based
Token-Ring
#(# tr1 at isa? port 0xa24 iomem 0xd0000 irq ? # IBM TROPIC based
Token-Ring
#(# tr* at isa? port ? irq ? # 3COM TROPIC based
Token-Ring
#(# we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
#(# we1 at isa? port 0x300 iomem 0xcc000 irq 10
# CardBus network cards
ath* at cardbus? dev ? function ? # Atheros 5210/5211/5212 802.11
#atw* at cardbus? dev ? function ? # ADMtek ADM8211 (802.11)
#ex* at cardbus? dev ? function ? # 3Com 3C575TX
fxp* at cardbus? dev ? function ? # Intel i8255x
#rtk* at cardbus? dev ? function ? # Realtek 8129/8139
#tlp* at cardbus? dev ? function ? # DECchip 21143
# MCA network cards
#(# elmc* at mca? slot ? # 3Com EtherLink/MC
(3c523)
#(# ep* at mca? slot ? # 3Com EtherLink III (3c529)
#(# we* at mca? slot ? # WD/SMC Ethernet
#(# ate* at mca? slot ? # Allied Telesis AT1720
#(# ne* at mca? slot ? # Novell NE/2 and clones
#(# tr* at mca? slot ? # IBM Token Ring adapter
#(# le* at mca? slot ? # SKNET Personal/MC2+
# MII/PHY support
#(# acphy* at mii? phy ? # Altima AC101 and AMD
Am79c874 PHYs
#(# amhphy* at mii? phy ? # AMD 79c901 Ethernet
PHYs
#(# bmtphy* at mii? phy ? # Broadcom BCM5201 and
BCM5202 PHYs
#(# brgphy* at mii? phy ? # Broadcom
BCM5400-family PHYs
#(# dmphy* at mii? phy ? # Davicom DM9101 PHYs
#(# exphy* at mii? phy ? # 3Com internal PHYs
#(# gentbi* at mii? phy ? # Generic Ten-Bit
1000BASE-[CLS]X PHYs
#(# glxtphy* at mii? phy ? # Level One LXT-1000
PHYs
#(# gphyter* at mii? phy ? # NS83861 Gig-E PHY
icsphy* at mii? phy ? # Integrated Circuit Systems
ICS189x
#(# igphy* at mii? phy ? # Intel IGP01E1000
#(# inphy* at mii? phy ? # Intel 82555 PHYs
#(# iophy* at mii? phy ? # Intel 82553 PHYs
#(# lxtphy* at mii? phy ? # Level One LXT-970 PHYs
#(# makphy* at mii? phy ? # Marvell Semiconductor
88E1000 PHYs
#(# nsphy* at mii? phy ? # NS83840 PHYs
#(# nsphyter* at mii? phy ? # NS83843 PHYs
#(# pnaphy* at mii? phy ? # generic HomePNA PHYs
#(# qsphy* at mii? phy ? # Quality Semiconductor
QS6612 PHYs
#(# sqphy* at mii? phy ? # Seeq 80220/80221/80223
PHYs
#(# tlphy* at mii? phy ? # ThunderLAN PHYs
#(# tqphy* at mii? phy ? # TDK Semiconductor PHYs
#(# ukphy* at mii? phy ? # generic unknown PHYs
#(# urlphy* at mii? phy ? # Realtek RTL8150L
internal PHYs
# USB Controller and Devices
# PCI USB controllers
ehci* at pci? dev ? function ? # Enhanced Host Controller
ohci* at pci? dev ? function ? # Open Host Controller
uhci* at pci? dev ? function ? # Universal Host Controller
(Intel)
# CardBus USB controllers
ehci* at cardbus? dev ? function ? # Enhanced Host Controller
ohci* at cardbus? dev ? function ? # Open Host Controller
# ISA USB controllers
#slhci0 at isa? port 0x300 irq 5 # ScanLogic SL811HS
# USB bus support
usb* at ehci?
usb* at ohci?
usb* at uhci?
#usb* at slhci?
# USB Hubs
uhub* at usb?
#(# uhub* at uhub? port ? configuration ? interface ?
# USB HID device
uhidev* at uhub? port ? configuration ? interface ?
# USB Mice
ums* at uhidev? reportid ?
wsmouse* at ums? mux 0
# USB Keyboards
#(# ukbd* at uhidev? reportid ?
#(# wskbd* at ukbd? console ? mux 1
# USB Generic HID devices
uhid* at uhidev? reportid ?
# USB Printer
#(# ulpt* at uhub? port ? configuration ? interface ?
# USB Modem
#(# umodem* at uhub? port ? configuration ?
#(# ucom* at umodem?
# USB Mass Storage
umass* at uhub? port ? configuration ? interface ?
#(# wd* at umass?
# USB audio
uaudio* at uhub? port ? configuration ?
# USB MIDI
#(# umidi* at uhub? port ? configuration ?
# USB IrDA
# USB-IrDA bridge spec
#(# uirda* at uhub? port ? configuration ? interface ?
#(# irframe* at uirda?
#(# ustir* at uhub? port ?
#(# irframe* at ustir?
# USB Ethernet adapters
#(# aue* at uhub? port ? # ADMtek AN986 Pegasus based
adapters
#(# cue* at uhub? port ? # CATC USB-EL1201A based
adapters
#(# kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based
adapters
#(# uax* at uhub? port ? # ASIX AX88172 based adapters
#(# udav* at uhub? port ? # Davicom DM9601 based adapters
#(# url* at uhub? port ? # Realtek RTL8150L based
adapters
# Prolific PL2301/PL2302 host-to-host adapter
#(# upl* at uhub? port ?
# Serial adapters
#(# ubsa* at uhub? port ? # Belkin serial adapter
#(# ucom* at ubsa? portno ?
#(# uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
#(# ucom* at uftdi? portno ?
#(# umct* at uhub? port ? # MCT USB-RS232 serial adapter
#(# ucom* at umct? portno ?
#(# uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
#(# ucom* at uplcom? portno ?
#(# uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
#(# ucom* at uvscom? portno ?
# Diamond Multimedia Rio 500
#(# urio* at uhub? port ?
# USB Handspring Visor
#(# uvisor* at uhub? port ?
#(# ucom* at uvisor?
# USB scanners
#(# uscanner* at uhub? port ?
# USB scanners that use SCSI emulation, e.g., HP5300
#(# usscanner* at uhub? port ?
# Y@P firmware loader
#(# uyap* at uhub? port ?
# D-Link DSB-R100 USB radio
#(# udsbr* at uhub? port ?
#(# radio* at udsbr?
# USB Generic driver
ugen* at uhub? port ?
# IrDA and Consumer Ir devices
# Toshiba Oboe
#(# oboe* at pci? dev ? function ?
#(# irframe* at oboe?
# PCI IEEE1394 controllers
fwohci* at pci? dev ? function ? # IEEE1394 Open Host Controller
# CardBus IEEE1394 controllers
fwohci* at cardbus? dev ? function ? # IEEE1394 Open Host Controller
#fw* at fwbus? # IP over 1394
# IEEE1394 nodes
#fwnode* at fwbus? idhi ? idlo ?
#sbpscsi* at fwnode?
#scsibus* at sbpscsi?
# Audio Devices
# PCI audio devices
auich* at pci? dev ? function ? # Intel ICH integrated AC'97
Audio
#(# autri* at pci? dev ? function ? # Trident 4DWAVE based
AC'97 Audio
#(# auvia* at pci? dev ? function ? # VIA VT82C686A
integrated AC'97 Audio
#(# clcs* at pci? dev ? function ? # Cirrus Logic CS4280
#(# clct* at pci? dev ? function ? # Cirrus Logic CS4281
#(# cmpci* at pci? dev ? function ? # C-Media CMI8338/8738
#(# eap* at pci? dev ? function ? # Ensoniq AudioPCI
#(# emuxki* at pci? dev ? function ? # Creative SBLive! and PCI512
#(# esa* at pci? dev ? function ? # ESS Allegro-1 /
Maestro-3 PCI Audio
#(# esm* at pci? dev ? function ? # ESS Maestro-1/2/2e PCI
Audio Accelerator
#(# eso* at pci? dev ? function ? # ESS Solo-1 PCI
AudioDrive
#(# fms* at pci? dev ? function ? # Forte Media FM801
#(# neo* at pci? dev ? function ? # NeoMagic 256 AC'97
Audio
#(# sv* at pci? dev ? function ? # S3 SonicVibes
#(# yds* at pci? dev ? function ? # Yamaha DS-1 PCI Audio
# ISA Plug-and-Play audio devices
#(# ess* at isapnp? # ESS Tech ES1887,
ES1888, ES888 audio
#(# guspnp* at isapnp? # Gravis Ultra Sound PnP audio
#(# sb* at isapnp? # SoundBlaster-compatible audio
#(# wss* at isapnp? # Windows Sound System
#(# ym* at isapnp? # Yamaha OPL3-SA3 audio
# ISA audio devices
# the "aria" probe might give false hits
#aria0 at isa? port 0x290 irq 10 # Aria
#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX
#(# gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra
Sound
#(# pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio
Spectrum
#pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System
#sp0 at pss0 port 0x530 irq 10 drq 0 # sound port
driver
#(# sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster
#(# wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound
System
# PCMCIA audio devices
#esl* at pcmcia? function ? # ESS 1688 AudioDrive
#cms0 at isa? port 0x220 # Creative Music System
# OPL[23] FM synthesizers
#opl0 at isa? port 0x388 # use only if not attached to sound card
#(# opl* at cmpci? flags 1
#opl* at esl?
#(# opl* at eso?
#(# opl* at ess?
#(# opl* at fms?
#(# opl* at sb?
#(# opl* at sv?
#(# opl* at wss?
#(# opl* at yds?
#(# opl* at ym?
# Audio support
audio* at audiobus?
# MPU 401 UARTs
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
#(# mpu* at cmpci?
#(# mpu* at eso?
#(# mpu* at fms?
#(# mpu* at sb?
#(# mpu* at yds?
#(# mpu* at ym?
# MIDI support
#(# midi* at midibus?
midi* at pcppi? # MIDI interface to the PC speaker
# The spkr driver provides a simple tone interface to the built in
speaker.
spkr0 at pcppi? # PC speaker
# FM-Radio devices
# ISA radio devices
#az0 at isa? port 0x350 # Aztech/PackardBell FM Radio Card
#az1 at isa? port 0x358
#rt0 at isa? port 0x20c # AIMS Lab Radiotrack & compatible
#rt1 at isa? port 0x284
#rt2 at isa? port 0x30c
#rt3 at isa? port 0x384
#rtii0 at isa? port 0x20c # AIMS Lab Radiotrack II FM Radio Card
#rtii1 at isa? port 0x30c
#sf2r0 at isa? port 0x384 # SoundForte RadioLink SF16-FMR2 FM
Radio Card
# PCI radio devices
#gtp* at pci? dev ? function ? # Guillemot Maxi Radio FM 2000 Radio
Card
# Radio support
#radio* at az?
#radio* at gtp?
#radio* at rt?
#radio* at rtii?
#radio* at sf2r?
# TV cards
# Brooktree 848/849/878/879 based TV cards
#(# bktr* at pci? dev ? function ?
#(# radio* at bktr?
# Mice
# ISA busmice
#(# lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
#(# lms1 at isa? port 0x238 irq 5
#(# mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
#(# mms1 at isa? port 0x238 irq 5
#(# wsmouse* at lms? mux 0
#(# wsmouse* at mms? mux 0
# Cryptographic Devices
# PCI cryptographic devices
#(# hifn* at pci? dev ? function ? # Hifn 7755/7811/795x
#(# ubsec* at pci? dev ? function ? # Broadcom
5501/5601/580x/582x
# Joysticks
joy* at pnpbios? index ? # Game port
# ISA Plug-and-Play joysticks
joy* at isapnp? # Game ports (usually on audio
cards)
# PCI joysticks
joy* at pci? # Game ports (usually on audio
cards)
#(# joy* at eso? # ESS Solo-1 on-board
joystick
# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
# Miscellaneous Devices
# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1
# Middle Digital, Inc. PCI-Weasel serial console board control
# devices (watchdog timer, etc.)
#(# weasel* at pci?
# Pull in optional local configuration
include "arch/i386/conf/GENERIC.local"
# Pseudo-Devices
pseudo-device crypto # opencrypto framework
# disk/mass storage pseudo-devices
pseudo-device ccd 4 # concatenated/striped disk
devices
pseudo-device cgd 4 # cryptographic disk devices
pseudo-device raid 8 # RAIDframe disk driver
options RAID_AUTOCONFIG # auto-configuration of RAID
components
# Options to enable various other RAIDframe RAID types.
#options RF_INCLUDE_EVENODD=1
#options RF_INCLUDE_RAID5_RS=1
#options RF_INCLUDE_PARITYLOGGING=1
#options RF_INCLUDE_CHAINDECLUSTER=1
#options RF_INCLUDE_INTERDECLUSTER=1
#options RF_INCLUDE_PARITY_DECLUSTERING=1
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
# Vinum
# pseudo-device vinum 8 # Vinum
# options VINUMDEBUG
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device sl 2 # Serial Line IP
pseudo-device strip 2 # Starmode Radio IP (Metricom)
pseudo-device irframetty # IrDA frame line discipline
pseudo-device tun 2 # network tunneling over tty
pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel
(RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation
i/f
#pseudo-device stf 1 # 6to4 IPv6 over IPv4
encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
pseudo-device bridge # simple inter-network bridging
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks
too
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
pseudo-device tb 1 # tablet line discipline
pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel
generator
#options RND_COM # use "com" randomness as well
(BROKEN)
pseudo-device clockctl # user control of clock
subsystem
# a pseudo device needed for Coda # also needs CODA (above)
pseudo-device vcoda 4 # coda minicache <-> venus comm.
# a pseudo device needed for SMBFS
pseudo-device nsmb # experimental - SMB requester
# wscons pseudo-devices
pseudo-device wsmux # mouse & keyboard multiplexor
pseudo-device wsfont
pseudo-device ksyms # /dev/ksyms
Ciao,
salex.