I haven't tried enabling ACPI yet, but other things
appear to be working fine. Radeon (4) driver from
the xorg package supports the new graphical chip.

NetBSD 2.99.16 (GENERIC) #1: Sat Mar 19 04:37:34 EST 2005
        root@hotdog:/usr/current-20050312/src/sys/arch/i386/compile/obj/GENERIC
total memory = 511 MB
avail memory = 492 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Dothan) (686-class), 1862.09 MHz, id 0x6d8
cpu0: features afe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbff<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 1.86GHz"
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep running at 1400 MHz (1308 mV)
cpu0: unknown Enhanced SpeedStep CPU
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2590 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel product 0x2591 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x5460 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 28 function 0: Intel 82801FB/FR PCI Express Port #0 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet
bge0: interrupting at irq 11
bge0: ASIC BCM5750 A1 (0x4001), Ethernet address 00:11:xx:xx:xx:xx
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci2: interrupting at irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci3: interrupting at irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB EHCI Controller (rev. 0x03)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xd3)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
cbb0 at pci3 dev 1 function 0: Texas Instruments product 0x8036 (rev. 0x00)
Texas Instruments product 0x8038 (miscellaneous communications) at pci3 dev 1 function 5 not configured
cbb0: interrupting at irq 5
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
Intel product 0x266d (modem communications, revision 0x03) at pci0 dev 30 function 3 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2641 (rev. 0x03)
pciide0 at pci0 dev 31 function 2
pciide0: Intel product 0x2653 (rev. 0x03)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to compatibility mode
pciide0: primary channel interrupting at irq 14
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel interrupting at irq 15
atabus1 at pciide0 channel 1
Intel 82801FB/FR SMBus Controller (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 47998 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <HTS548080M9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CDRW/DVD SN-324S, , U303> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)