Hi all,

i have been trying to set up my netbsd 1.6.1 for a couple of weeks
with no luck. Netbsd fails to recognize the master on the primary
channel. It says something like: disabling primary channel, no disks
available. I built a current kernel a few weeks ago, but ist doesn't
help either. I played with the harddisk jumpers and with the BIOS of the
mainboard. The 1.6.1 Kernel does sometimes see the disk but then it
hangs a few seconds while trying to mount the root file system:

Kernelized RAIDframe activated
pciide0:0:0: not ready, st=0x00, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: not ready, st=0x00, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: not ready, st=0x00, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0: soft error (corrected)

then it boots from wd0.

My NetBSD system at work works without any problems (of course with
different hardware).

I had been a little bit disappointed and have left it
aside, but since i really want get the system running i am seeking
help now.
I'm not a kernel programmer to find something myself in the sources.
Below is a dmesg, i hope that anyone has a suggestion.

Thanks in advance,

Ertan



NetBSD 1.6.1 (GENERIC) #0: Tue Apr  8 12:05:52 UTC 2003
   
autobuild@tgm.daemon.org:/autobuild/netbsd-1-6/i386/OBJ/autobuild/netbsd-1-6/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 7 (Morgan) (686-class), 1297.59 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 64 KB 64b/line 16-way
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
total memory = 255 MB
avail memory = 230 MB
using 3296 buffers containing 13184 KB of memory
BIOS32 rev. 0 found at 0xfdac0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8366 (Apollo KT266) CPU-PCI Bridge (rev. 0x00)
agp0 at pchb0NetBSD 1.6.1 (GENERIC) #0: Tue Apr  8 12:05:52 UTC 2003
   
autobuild@tgm.daemon.org:/autobuild/netbsd-1-6/i386/OBJ/autobuild/netbsd-1-6/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 7 (Morgan) (686-class), 1297.59 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 64 KB 64b/line 16-way
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
total memory = 255 MB
avail memory = 230 MB
using 3296 buffers containing 13184 KB of memory
BIOS32 rev. 0 found at 0xfdac0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8366 (Apollo KT266) CPU-PCI Bridge (rev. 0x00)
agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8366 CPU-AGP Bridge
(rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation GeForce2 MX [NV11]
(rev. 0xb2)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ne2 at pci0 dev 11 function 0: Compex Ethernet
ne2: Ethernet address 00:80:48:c5:30:44
ne2: interrupting at irq 10
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB
Controller (rev. 0x80)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB
Controller (rev. 0x80)
uhci1: interrupting at irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB
Controller (rev. 0x80)
uhci2: interrupting at irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
VIA Technologies product 0x3104 (USB serial bus, interface 0x20,
revision 0x82) at pci0 dev 16 function 3 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
pciide0 at pci0 dev 17 function 1: VIA Technologies VT8235 ATA133
controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0812N>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76351 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 156368016
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CD-ROM 52X/AKH, , R65> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
DMA data transfers)
VIA Technologies VT8233/VT8235 AC-97 Audio Controller (audio multimedia,
revision 0x50) at pci0 dev 17 function 5 not configured
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: 00:0c:6e:2f:8b:4e
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0032, rev. 5
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask eb6d netmask ef6d ttymask ffef
Kernelized RAIDframe activated
pciide0:0:0: not ready, st=0x00, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: not ready, st=0x00, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: not ready, st=0x00, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0: soft error (corrected)
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
uhub2: port error, restarting port 1
uhub2: port error, giving up port 1
uhub2: port error, restarting port 2
uhub2: port error, giving up port 2
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

-- 
Ertan Payci 
<ertan.payci@gmx.net>
<ertan@clpa.org>