Dear all.
I have a new Adaptec ASC-29320 but I have a trouble with this card under=20
NetBSD 1.6.1. I want to use a HostRaid (Raid 1 at two disks) mode, but it=
=20
doesn't work at normal mode yet. The start of NetBSD stop at scsibus0:=20
waiting 2 seconds for devices to settle...
At DOS, it works fine.

I was tested an older ASC-29160N and it work fine.
Do you have somebody an experience with thic card under NetBSD?

Thank you=20
Petr Canda

PS:=20
*************messages with ASC-29160N ****************************
Nov  1 12:06:25 router /netbsd: ahc0 at pci0 dev 11 function 0
Nov  1 12:06:25 router /netbsd: ahc0: interrupting at irq 5
Nov  1 12:06:25 router /netbsd: ahc0: aic7892 Wide Channel A, SCSI Id=3D7=
,=20
16/255 SCBs
Nov  1 12:06:25 router /netbsd: scsibus0 at ahc0: 16 targets, 8 luns per=20
target
Nov  1 12:06:25 router /netbsd: ahc1 at pci0 dev 12 function 0
Nov  1 12:06:25 router /netbsd: ahc1: interrupting at irq 11
Nov  1 12:06:25 router /netbsd: ahc1: aic7880 Wide Channel A, SCSI Id=3D7=
,=20
16/255 SCBs
Nov  1 12:06:25 router /netbsd: ahc1: Host Adapter Bios disabled.  Using=20
default SCSI device parameters
Nov  1 12:06:25 router /netbsd: scsibus1 at ahc1: 16 targets, 8 luns per=20
target
=2E....
Nov  1 12:06:25 router /netbsd: scsibus0: waiting 2 seconds for devices t=
o=20
settle...
Nov  1 12:06:25 router /netbsd: sd0 at scsibus0 target 0 lun 0: <IBM,=20
IC35L036UWDY10-0, S23C> SCSI3 0/direct fixed
Nov  1 12:06:25 router /netbsd: sd0: 35003 MB, 36703 cyl, 3 head, 651 sec=
, 512=20
bytes/sect x 71687340 sectors
Nov  1 12:06:25 router /netbsd: sd0: sync (25.0ns offset 127), 16-bit=20
(80.000MB/s) transfers, tagged queueing
Nov  1 12:06:25 router /netbsd: sd1 at scsibus0 target 1 lun 0: <IBM,=20
IC35L036UCDY10-0, S23C> SCSI3 0/direct fixed
Nov  1 12:06:25 router /netbsd: sd1: 35003 MB, 36703 cyl, 3 head, 651 sec=
, 512=20
bytes/sect x 71687340 sectors
Nov  1 12:06:25 router /netbsd: sd1: sync (25.0ns offset 127), 16-bit=20
(80.000MB/s) transfers, tagged queueing
Nov  1 12:06:25 router /netbsd: scsibus1: waiting 2 seconds for devices t=
o=20
settle...

*************messages with ASC-29160N ****************************

*************messages with ASC-29320 ****************************
Nov  1 22:05:14 router /netbsd: Adaptec (2nd PCI Vendor ID) product 0x801=
2=20
(SCSI mass storage, revision 0x03) at pci0 dev 11 function 0 not configur=
ed
Nov  1 22:05:14 router /netbsd: Adaptec (2nd PCI Vendor ID) product 0x801=
2=20
(SCSI mass storage, revision 0x03) at pci0 dev 11 function 1 not configur=
ed
Nov  1 22:05:14 router /netbsd: ahc0 at pci0 dev 12 function 0
Nov  1 22:05:14 router /netbsd: ahc0: interrupting at irq 11
Nov  1 22:05:14 router /netbsd: ahc0: aic7880 Wide Channel A, SCSI Id=3D7=
,=20
16/255 SCBs
Nov  1 22:05:14 router /netbsd: ahc0: Host Adapter Bios disabled.  Using=20
default SCSI device parameters
Nov  1 22:05:14 router /netbsd: scsibus0 at ahc0: 16 targets, 8 luns per=20
target
=2E..
Nov  1 22:05:14 router /netbsd: scsibus0: waiting 2 seconds for devices t=
o=20
settle...
*************messages with ASC-29320 ****************************