--0F1p//8PRICkK4MW
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Hello,

I have a 1.6_STABLE system with an ISA<->PCMCIA adapter.  I have been
using SanDisk CF cards (15 and 24 MB) without problems for quite
some time (since 1.5_something), but now I have encountered new cards
which do not work.  These cards work on digital cameras and other
devices, but not on my NetBSD system.  It seems that the card information
is not probed properly which makes NetBSD believe there are 0 heads,
which in turn causes a system panic if I try to access the CF card.

I accidentally left one such card in the PCMCIA slot last night and
when I returned, the system was in a reboot-panic-reboot loop (I guess
the daily script tried to run disklabel on the CF card which caused
a kernel panic and after that, the system paniced at every boot).

Both failing cards fail the same way.  One card is a 512 MB "extrememory"
card, the other is a 128 MB Pretec card.

dmesg output with the 512 MB info (not probed correctly) is attached.

On a friend's laptop, the card probes like this:

wd1 at wdc2 channel 0 drive 0: <512MB CHH>
wd1: drive supports 1-sector PIO transfers, LBA addressing
wd1: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1000944 sectors

I'll build a new kernel if anyone has ideas of what I could try.
The PCMCIA adapter I have works OK with the older CF's, so it can't
be _all_ bad - but what else could it be?

Thanks,

  -jm

--0F1p//8PRICkK4MW
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dm

NetBSD 1.6_STABLE (XSERVER16SOLTEK) #0: Mon Dec 30 17:41:02 EET 2002
    root@pyy:/tmp/nb/src/sys/arch/i386/compile/XSERVER16SOLTEK
cpu0: AMD Athlon Model 6 (Palomino) (686-class), 1538.60 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
total memory = 767 MB
avail memory = 708 MB
using 6144 buffers containing 39400 KB of memory
BIOS32 rev. 0 found at 0xfb3d0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8363 KT133 System Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 KT133 PCI to AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Matrox MGA G200 AGP (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x40)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV4002H>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38204 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78242976 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <Hewlett-Packard CD-Writer Plus 9100, YM00581JPR, 1.0a> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <CRD-8520B, 2000/05/08, 1.00> type 5 cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x1a)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x1a)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viapm0 at pci0 dev 7 function 4
viaenv0 at viapm0
auvia0 at pci0 dev 7 function 5: VIA VT82C686A AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 3
auvia0: ICE17 codec; headphone, 18 bit DAC, 18 bit ADC, Unknown 3D
audio0 at auvia0: full duplex, mmap, independent
siop0 at pci0 dev 8 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop0: using on-board RAM
siop0: interrupting at irq 11
scsibus0 at siop0: 16 targets, 8 luns per target
fxp0 at pci0 dev 9 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:d0:b7:c5:02:c8
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0 at pci0 dev 10 function 0
bktr0: interrupting at irq 3
bktr0: Hauppauge Model 44914 C121
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, remote control.
radio0 at bktr0
Brooktree product 0x0878 (miscellaneous multimedia, revision 0x11) at pci0 dev 10 function 1 not configured
eap0 at pci0 dev 11 function 0: Ensoniq AudioPCI (rev. 0x01)
eap0: interrupting at irq 9
audio1 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xe0000-0xeffff irq 
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask eb6d netmask ef6d ttymask ffef
scsibus0: waiting 2 seconds for devices to settle...
st0 at scsibus0 target 1 lun 0: <WANGTEK, 5525ES SCSI REV7, 3F> SCSI1 1/sequential removable
st0: rogue, drive empty
st0: async, 8-bit transfers
st1 at scsibus0 target 4 lun 0: <HP, C1533A, A812> SCSI2 1/sequential removable
st1: density code 36, variable blocks, write-enabled
st1: sync (100.0ns offset 16), 8-bit (10.000MB/s) transfers
pcic0: controller 0 detecting irqs with mask 0xdeb8:..5
pcic0: can't share irq with cards; polling for socket events
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
ulpt0 at uhub1 port 1 configuration 1 interface 0
ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1
ulpt1 at uhub0 port 1 configuration 1 interface 0ulpt0: using bi-directional mode

ulpt1: Hewlett-Packard DeskJet 970C, rev 1.00/1.00, addr 2, iclass 7/1
ulpt1: using bi-directional mode
uhub2 at uhub0 port 2
uhub2: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 3
uhub2: 2 ports with 2 removable, bus powered
uscanner0 at uhub2 port 1
uscanner0: EPSON EPSON Scanner, rev 1.00/1.10, addr 4
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: CF Card, CFA 512MB CHH, , 
pcmcia0: Manufacturer code 0x7, product 0x0
pcmcia0: function 0: fixed disk(ata), ccr addr 200 mask f
pcmcia0: function 0, config table entry 0: memory card; irq mask 0; memspace 0-7ff; rdybsy_active powerdown
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia0: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f7; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia0: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
wdc2 at pcmcia0 function 0 port 0x400-0x40f
wd1 at wdc2 channel 0 drive 0: <2MB CHH>
wd1: drive supports 1-sector PIO transfers, chs addressing
wd1: 0, 993 cyl, 0 head, 15 sec, 512 bytes/sect x 0 sectors
wd1 detached
wdc2 detached

--0F1p//8PRICkK4MW--