Subject: Re: Help enabling PCI ethernet card, tlp0
To: Philip Brodd <firstname.lastname@example.org>
From: Ceri Storey <email@example.com>
Date: 12/12/2002 03:04:19
On Wed, Dec 11, 2002 at 06:55:01PM -0800, Philip Brodd wrote:
> Here is the output of ifconfig -a. This is after I have changed the interface
> from "mc0" to "tlp0" in dhclient.conf and rebooted.
> tlp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> address: 00:00:94:cc:6c:7f
> media: Ethernet autoselect (none)
> status: no carrier
I believe this is your problem :) I take it you're sure the cable's
plugged in? You may beed to reseat it, on the card as well as the switch
I've seen a fair few machines which would go down just because the
ethernet cable came loose...
Ceri Storey <firstname.lastname@example.org>