is it normal that it keeps unsent packets for such logs instead of
dropping it?



64 bytes from 10.20.30.3: icmp_seq=11 ttl=32 time=1.391 ms
64 bytes from 10.20.30.3: icmp_seq=12 ttl=32 time=1.354 ms
Jun 25 09:22:07 chylonia /netbsd: le0: device timeout

---- here i disconnected BNC connector for 15-16 secs

64 bytes from 10.20.30.3: icmp_seq=21 ttl=32 time=15764.013 ms
64 bytes from 10.20.30.3: icmp_seq=22 ttl=32 time=14767.406 ms
64 bytes from 10.20.30.3: icmp_seq=23 ttl=32 time=13767.771 ms
64 bytes from 10.20.30.3: icmp_seq=24 ttl=32 time=12768.099 ms
64 bytes from 10.20.30.3: icmp_seq=25 ttl=32 time=11778.437 ms
64 bytes from 10.20.30.3: icmp_seq=26 ttl=32 time=10768.770 ms
64 bytes from 10.20.30.3: icmp_seq=27 ttl=32 time=9769.102 ms
64 bytes from 10.20.30.3: icmp_seq=28 ttl=32 time=8769.435 ms
64 bytes from 10.20.30.3: icmp_seq=29 ttl=32 time=7769.772 ms
64 bytes from 10.20.30.3: icmp_seq=30 ttl=32 time=6770.137 ms
64 bytes from 10.20.30.3: icmp_seq=31 ttl=32 time=5770.475 ms
64 bytes from 10.20.30.3: icmp_seq=32 ttl=32 time=4770.806 ms
64 bytes from 10.20.30.3: icmp_seq=33 ttl=32 time=3771.133 ms
64 bytes from 10.20.30.3: icmp_seq=34 ttl=32 time=2771.473 ms
64 bytes from 10.20.30.3: icmp_seq=35 ttl=32 time=1771.801 ms
64 bytes from 10.20.30.3: icmp_seq=36 ttl=32 time=782.131 ms
64 bytes from 10.20.30.3: icmp_seq=37 ttl=32 time=1.270 ms
64 bytes from 10.20.30.3: icmp_seq=38 ttl=32 time=1.347 ms
64 bytes from 10.20.30.3: icmp_seq=39 ttl=32 time=1.361 ms
64 bytes from 10.20.30.3: icmp_seq=40 ttl=32 time=1.302 ms
64 bytes from 10.20.30.3: icmp_seq=41 ttl=32 time=1.406 ms
64 bytes from 10.20.30.3: icmp_seq=42 ttl=32 time=1.391 ms


--------------------------------
Where do you think you go today?