Hello

I couldnt install 1.5.2 in the mainboard intel scb2
with 7899 chip embedded,

pci1 at pchb0 bus 1
pci1: no spaces enabled!
pci2 at pchb2 bus 1
pci3 at pchb3 bus 2
ahc1 at pci2 dev 7 function 0: unable to map registers
ahc2 at pci2 dev 7 function 1: unable to map registers
(full listing at the end of this mail)

Then I download boot1.fs and boot2.fs from 1.6_BETA2, I
started the box with the floppies.

pci1 at pchb0 bus 1
pci1: no spaces enabled!
pci2 at pchb2 bus 1
ahc1 at pci2 dev 7 function 0
ahc1: interrupting at irq 7
ahc1: aic7899 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci2 dev 7 function 1
ahc2: interrupting at irq 9
ahc2: aic7899 Wide Channel B, SCSI Id=7, 16/255 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target

scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 15 lun 0: <FUJITSU, MAN3367MP, 0108> SCSI3 0/direct fixed
sd0: 35044 MB, 29950 cyl, 4 head, 599 sec, 512 bytes/sect x 71771688 sectors
sd0: sync (25.0ns offset 127), 16-bit (80.000MB/s) transfers, tagged queueing
(full listing at the end of this mail)

With this floppies I could disklabel and newfs the hard disk
with no problems... It seems 1.6 will work fine in this board.

Question:
bus1 is in two different pchb's. does it will
be a problem in the future?

Thanks in advance

Heron Gallegos
--------------------------------------------------
NetBSD 1.5.2 (INSTALL) #3: Sat Aug 18 23:52:07 CEST 2001
    he@hamster.urc.uninett.no:/usr/src/sys/arch/i386/compile/INSTALL
cpu0: Intel (null) (686-class), 1197.08 MHz
total memory = 1023 MB
avail memory = 943 MB
using 11424 buffers containing 52508 KB of memory
BIOS32 rev. 0 found at 0xfda54
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1166 product 0x0008 (rev. 0x23)
pci1 at pchb0 bus 1
pci1: no spaces enabled!
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1166 product 0x0008 (rev. 0x01)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1166 product 0x0006 (rev. 0x01)
pci2 at pchb2 bus 1
pci2: memory space enabled
ahc1 at pci2 dev 7 function 0: unable to map registers
ahc2 at pci2 dev 7 function 1: unable to map registers
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1166 product 0x0006 (rev. 0x01)
pci3 at pchb3 bus 2
pci3: memory space enabled
fxp0 at pci0 dev 3 function 0: Intel i82557 Ethernet, rev 13
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:03:47:a4:f5:ff, 10/100 Mb/s
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 4 function 0: Intel i82557 Ethernet, rev 13
fxp1: interrupting at irq 5
fxp1: Ethernet address 00:03:47:a4:f6:00, 10/100 Mb/s
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x1002 product 0x4752 (VGA display, revision 0x27) at pci0 dev 12 function 0 not configured
pcib0 at pci0 dev 15 function 0
pcib0: vendor 0x1166 product 0x0201 (rev. 0x92)
pciide0 at pci0 dev 15 function 1: vendor 0x1166 product 0x0212 (rev. 0x92)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel interrupting at irq 14
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 0: <CD-ROM 56X/AKH, , A81> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no drives?)
ohci0 at pci0 dev 15 function 2: vendor 0x1166 product 0x0220 (rev. 0x05)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pchb4 at pci0 dev 15 function 3
pchb4: vendor 0x1166 product 0x0230 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ffc5 netmask ffe5 ttymask ffe7
md0: internal 2048K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
---------------------------------------------------------
NetBSD 1.6_BETA2 (INSTALL) #0: Tue Jun 18 17:45:38 UTC 2002
    autobuild@tgm.daemon.org:/autobuild/i386/OBJ/autobuild/src/sys/arch/i386/compile/INSTALL
cpu0: Intel Pentium III (Tualatin) (686-class), 1197.09 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 256 KB 32b/line 8-way
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
total memory = 1023 MB
avail memory = 944 MB
using 6144 buffers containing 52496 KB of memory
BIOS32 rev. 0 found at 0xfda54
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1166 product 0x0008 (rev. 0x23)
pci1 at pchb0 bus 1
pci1: no spaces enabled!
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1166 product 0x0008 (rev. 0x01)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1166 product 0x0006 (rev. 0x01)
pci2 at pchb2 bus 1
pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc1 at pci2 dev 7 function 0
ahc1: interrupting at irq 7
ahc1: aic7899 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci2 dev 7 function 1
ahc2: interrupting at irq 9
ahc2: aic7899 Wide Channel B, SCSI Id=7, 16/255 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1166 product 0x0006 (rev. 0x01)
pci3 at pchb3 bus 2
pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
fxp0 at pci0 dev 3 function 0: i82550 Ethernet, rev 13
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:03:47:a4:f5:ff
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 4 function 0: i82550 Ethernet, rev 13
fxp1: interrupting at irq 5
fxp1: Ethernet address 00:03:47:a4:f6:00
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x1002 product 0x4752 (VGA display, revision 0x27) at pci0 dev 12 function 0 not configured
pcib0 at pci0 dev 15 function 0
pcib0: vendor 0x1166 product 0x0201 (rev. 0x92)
pciide0 at pci0 dev 15 function 1: ServerWorks CSB5 IDE Controller (rev. 0x92)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 0: <CD-ROM 56X/AKH, , A81> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel interrupting at irq 15
ohci0 at pci0 dev 15 function 2: vendor 0x1166 product 0x0220 (rev. 0x05)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pchb4 at pci0 dev 15 function 3
pchb4: vendor 0x1166 product 0x0230 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ffc5 netmask ffe5 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 15 lun 0: <FUJITSU, MAN3367MP, 0108> SCSI3 0/direct fixed
sd0: 35044 MB, 29950 cyl, 4 head, 599 sec, 512 bytes/sect x 71771688 sectors
sd0: sync (25.0ns offset 127), 16-bit (80.000MB/s) transfers, tagged queueing
md0: internal 2048 KB image area
sd0: no disk label
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console
sd0: no disk label
sd0: no disk label
sd0: no disk label
sd0: no disk label
sd0: no disk label

This msgbuf is before the disklabeling of sd0