Hi,

	strange thing...
	when XMMS is playing some mp3 and I resize a window, XMMS stops playing
till I finish resizing the window ; then it continues to play...

	I've done some testing and here're the results:
it happens on NetBSD 1.5.2, 1.5.3RC2 and 1.5ZC
it doesn't on OpenBSD 3.0-STABLE, 3.1-STABLE (I tested thos as Open
quite resemble Net...)

	This issue happens whatever the WM is (I tested WindowMaker and
BlackBox) but doesn't happens with GQmpeg

	I tought this could be an XMMS port issue - maybe some thread problem
???
	Any idea ?

thX for answers,
	Jo

PS: dmesg ;)
NetBSD 1.5.3_RC2 (ATHERIA - NetBSD 1.5.x - 1.0.0) #0: Sat May 11
23:12:25 CEST 2002
    root@atheria:/usr/src/sys/arch/i386/compile/ATHERIA
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 1201.52 MHz
total memory = 255 MB
avail memory = 231 MB
using 3296 buffers containing 13184 KB of memory
BIOS32 rev. 0 found at 0xfb5b0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Advanced Micro Devices product 0x700e (rev. 0x13)
ppb0 at pci0 dev 1 function 0: Advanced Micro Devices product 0x700f
(rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: Nvidia Corporation product 0x0110 (rev.
0xb2)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev.
0x40)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo
KX133) ATA100 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IC35L040AVER07-0>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 39266 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 80418240
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (using DMA data
transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <PLEXTOR CD-R   PX-W1610A, , 1.04> type 5
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data
transfers)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller
(rev. 0x16)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller
(rev. 0x16)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
VIA Technologies VT82C686A SMBus Controller (SMBus serial bus, revision
0x40) at pci0 dev 7 function 4 not configured
eap0 at pci0 dev 8 function 0: Ensoniq AudioPCI 97 (rev. 0x08)
eap0: interrupting at irq 11
eap0: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal
Semi 3D
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
ahc1 at pci0 dev 11 function 0
ahc1: interrupting at irq 11
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1 channel 0: 16 targets, 8 luns per target
ex0 at pci0 dev 15 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
ex0: interrupting at irq 10
ex0: MAC address 00:60:97:ba:b9:1c
nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask eb65 netmask ef65 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 20.0MHz, offset = 0x8
ahc1: target 0 using tagged queuing
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST318406LW, 0109> SCSI3
0/direct fixed
sd0: 17501 MB, 26302 cyl, 2 head, 681 sec, 512 bytes/sect x 35843670
sectors
uhub2 at uhub0 port 2
uhub2: vendor 0x04e1 product 0x0201, class 9/0, rev 1.10/1.10, addr 2
uhub2: 4 ports with 4 removable, self powered
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 added (80x50, vt100 emulation)
wsmux1: connecting to wsdisplay0