Hi,
I really don't keep original boxes, or microsoft install based cdroms. However:

Jukka Marin wrote:

> Hi,
>
> Thanks for the info!
>
> > I am now  very succesfully using the Hauppage WinTV pci card in 1.5ZA my
> > dmesg:
> > bktr0 at pci0 dev 7 function 0
> > bktr0: interrupting at irq 10
> > bktr0: Hauppauge Model 61381 D423
> > bktr0: Detected a MSP3430G-B6 at 0x80
> > bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c
> > stereo, remote control.
> > radio0 at bktr0

There is no remaining box, however the above card has one each coaxial input
connector for FM and TV
and S-Video input for camcorder hookup(S-Video to RCA jack connector as well).
Also 2 small audio in and out jacks. This card was purchased retail new in
July01 from local mass retailer. Software was on Cdrom for win98/2000-chucked
with the box(WinTv1?).

>
>
> Does the card above have NICAM stereo sound?  (Well, I guess you live
> in a place where they don't use NICAM..)  Is the card WinTV or WinTV1?
>
> > This is a newer card, 9 months old? Phillips chip. i also have used a
> > model 401succesfully. Here dmesg reports:

>
> > bktr0 at pci0 dev 7 function 0
> > bktr0: interrupting at irq 10
> > bktr0: Hauppauge Model 56111 C
> > bktr0: Hauppauge WinCast/TV, Philips NTSC tuner, dbx stereo. This has a
> > bt848kpf video decoder chip.

This is a model WinTv 401, older card no coaxial FM input just  coaxial TV
input , No S-video input just red/white/yellow RCA camcorder jacks. If you want
to use fxtv (camcorder download) the WinTv card must have s-video our
equivalent inputs. Some of these cards are only for TV or FM radio use.

>

-Mel