Subject: ALTQ: newbie questions
To: None <netbsd-users@netbsd.org>
From: Lista de NetBSD Users <list10@sepc.edu.mx>
List: netbsd-users
Date: 02/01/2002 11:41:02
Hello
Our firewall runs NetBSD-1.5.2/i386 and ipnat/ipf/squid.
It is PII/350, 256M RAM, 2 3c905B cards, 3 2GB SCSI-III.
Our users in the intranet are using packages morpheus,
kazaa, audiogalaxy, etc. which uses service tcp 1214
and are eating our small bandwidth to our ISP.
I want to limit the service tcp 1214 to use
no more of 256 kilobits per second.
I have patched /usr/src/sys with the diffs of altq-3.0
and I need compile the new kernel for our firewall.
Altq-3.0 have a lot of "kernel options" and I don't know
which of these options are good for the new kernel.
(this is my first time with altq and I dont understand
the most of these options)
Altq-3.0 have this options as default:
# a pseudo device needed for ALTQ
pseudo-device altq # altq pseudo-device
# ALTQ options
options ALTQ #alternate queueing
options ALTQ_CBQ #class based queueing
options ALTQ_WFQ #weighted fair queueing
options ALTQ_FIFOQ #fifo queueing
options ALTQ_RED #random early detection
#options ALTQ_FLOWVALVE #flowvalve for RED (needs RED)
options ALTQ_RIO #triple red for diffserv (needs RED)
#options ALTQ_LOCALQ #local use
options ALTQ_HFSC #hierarchical fair service curve
#options ALTQ_ECN #ecn extention to tcp (needs RED)
#options ALTQ_IPSEC #check ipsec in IPv4
options ALTQ_CDNR #diffserv traffic conditioner
#options ALTQ_BLUE #blue by wu-chang feng
options ALTQ_PRIQ #priority queue
#options ALTQ_NOPCC #don't use processor cycle counter
#options ALTQ_DEBUG #for debugging
Question:
Are these defaults good for me?
Thanks a lot for your time and your patience
Heron Gallegos
Centro Siglo XXI _ Informatica Educativa
Saltillo Coahuila Mexico
-------------------------------------------------------
This is the conf file of my server:
-------------------------------------------------------
# This file has been taken from "GENERIC"
# $NetBSD: MIRANDA,v 1.354.2.15 2001/05/06 15:18:54 he Exp $
#
# MIRANDA -- everything that's currently supported
#
include "arch/i386/conf/std.i386"
#ident "MIRANDA-$Revision: 1.354.2.15 $"
maxusers 32 # estimated number of users
# CPU support. At least one is REQUIRED.
#options I386_CPU
#options I486_CPU
#options I586_CPU
options I686_CPU
# CPU-related options.
#options MATH_EMULATE # floating point emulation
#options VM86 # virtual 8086 emulation
#options USER_LDT # user-settable LDT; used by WINE
# eliminate delay no-ops in I/O; recommended on all but very old machines
#options DUMMY_NOPS
# delay between "rebooting ..." message and hardware reset, in milliseconds
#options CPURESET_DELAY=2000
# This option allows you to force a serial console at the specified
# I/O address. see console(4) for details.
#options "CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
# you don't want the option below ON iff you are using the
# serial console option of the new boot strap code.
#options CONS_OVERRIDE # Always use above! independent of boot info
# The following options override the memory sizes passed in from the boot
# block. Use them *only* if the boot block is unable to determine the correct
# values. Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options REALBASEMEM=639 # size of base memory (in KB)
#options REALEXTMEM=15360 # size of extended memory (in KB)
# Standard system options
#options UCONSOLE # users can use TIOCCONS (for xconsole)
#options INSECURE # disable kernel security levels
options RTC_OFFSET=360 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
#options KTRACE # system call tracing via ktrace(1)
#options SYSVMSG # System V-like message queues
#options SYSVSEM # System V-like semaphores
#options SYSVSHM # System V-like memory sharing
#options SHMMAXPGS=1024 # 1024 pages is the default
options NMBCLUSTERS=4096
#options LKM # loadable kernel modules
# Diagnostic/debugging support options
#options DIAGNOSTIC # expensive kernel consistency checks
#options DEBUG # expensive debugging checks/support
#options KMEMSTATS # kernel memory statistics (vmstat -m)
#options DDB # in-kernel debugger
#options DDB_HISTORY_SIZE=512 # enable history editing in DDB
#options KGDB # remote debugger
#options "KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
#options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
#options COMPAT_09 # NetBSD 0.9,
#options COMPAT_10 # NetBSD 1.0,
#options COMPAT_11 # NetBSD 1.1,
#options COMPAT_12 # NetBSD 1.2,
#options COMPAT_13 # NetBSD 1.3,
#options COMPAT_14 # NetBSD 1.4,
#options COMPAT_43 # and 4.3BSD
#options COMPAT_386BSD_MBRPART # recognize old partition ID
#options COMPAT_SVR4 # binary compatibility with SVR4
#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
#options COMPAT_LINUX # binary compatibility with Linux
#options COMPAT_FREEBSD # binary compatibility with FreeBSD
#options COMPAT_PECOFF # kernel support to run Win32 apps
# File systems
file-system FFS # UFS
#file-system EXT2FS # second extended file system (linux)
#file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network File System client
#file-system NTFS # Windows/NT file system (experimental)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
#file-system FDESC # /dev/fd
#file-system KERNFS # /kern
#file-system NULLFS # loopback file system
#file-system OVERLAY # overlay file system
#file-system PORTAL # portal filesystem (still experimental)
#file-system PROCFS # /proc
#file-system UMAPFS # NULLFS + uid and gid remapping
#file-system UNION # union file system
#file-system CODA # Coda File System; also needs vcoda (below)
# File system options
#options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independent support
#options SOFTDEP # FFS soft updates support.
#options NFSSERVER # Network File System server
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Networking options
options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
#options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
#options NS # XNS
#options NSIP # XNS tunneling over IP
#options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
#options CCITT,LLC,HDLC # X.25
#options NETATALK # AppleTalk networking protocols
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
#options PPP_DEFLATE # Deflate compression support for PPP
#options PPP_FILTER # Active filter support for PPP (requires bpf)
#options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
#options TCP_COMPAT_42
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options EISAVERBOSE # verbose EISA device autoconfig messages
options MIIVERBOSE # verbose PHY autoconfig messages
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
options SCSIVERBOSE # human readable SCSI error messages
#options USBVERBOSE # verbose USB device autoconfig messages
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
#options PNPBIOSDEBUG # more fullsome Pnp BIOS debugging messages
#options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
#
# wscons options
#
# builtin terminal emulations
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options WS_KERNEL_FG=WSCOL_GREEN
#options WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
mainbus0 at root
#apm0 at mainbus0 # Advanced power management
# Tuning for power management, see apm(4) for more details.
#options APM_NO_IDLE # Don't call BIOS CPU idle function
#options APM_V10_ONLY # Use only the APM 1.0 calls
#options APM_NO_POWEROFF # Don't power off on halt(8)
#options APM_POWER_PRINT # Print stats on the console
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
# Basic Bus Support
# Plug-and-Play BIOS and attached devices
#pnpbios* at mainbus?
# mainboard audio chips
#ess* at pnpbios? index ? # ESS AudioDrive
#sb* at pnpbios? index ? # NeoMagic 256AV in sb mode
#wss* at pnpbios? index ? # NeoMagic 256AV in wss mode
#ym* at pnpbios? index ? # OPL3-SA3
# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
# will be no com0. A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
#com* at pnpbios? index ? # serial ports
# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
#lpt* at pnpbios? index ? # parallel ports
#pckbc* at pnpbios? index ? # PC keyboard/mouse controller
#fdc* at pnpbios? index ? # floppy controller
# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide* at pnpbios? index ?
# PCI bus support
pci* at mainbus? bus ?
#pci* at pchb? bus ?
pci* at ppb? bus ?
# Configure PCI using BIOS information
#options PCIBIOS # PCI BIOS support
#options PCIBIOSVERBOSE # PCI BIOS verbose info
#options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
#options PCIBIOS_INTR_GUESS # see pcibios(4)
#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
# PCI bridges
pchb* at pci? dev ? function ? # PCI-Host bridges
#pceb* at pci? dev ? function ? # PCI-EISA bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
#puc* at pci? dev ? function ? # PCI "universal" comm. cards
# EISA bus support
#eisa* at mainbus?
#eisa* at pceb?
# ISA bus support
#isa* at mainbus?
#isa* at pceb?
isa* at pcib?
# PCMCIA bus support
#pcmcia* at pcic? controller ? socket ?
#pcmcia* at tcic? controller ? socket ?
# ISA PCMCIA controllers
#pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
#pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
#tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
# PCI PCMCIA controllers
#pcic0 at pci? dev? function ?
# ISA Plug-and-Play bus support
isapnp0 at isa?
# ISA Plug-and-Play PCMCIA controllers
#pcic* at isapnp?
# CardBus bridge support
#cbb* at pci? dev ? function ?
#cardslot* at cbb?
# CardBus bus support
#cardbus* at cardslot?
#pcmcia* at cardslot?
# Coprocessor Support
# Math Coprocessor support
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
# Console Devices
# ISA console
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
# Keyboard layout configuration for pccons
#options FRENCH_KBD
#options FINNISH_KBD
#options GERMAN_KBD
#options NORWEGIAN_KBD
# pccons-specific options:
#options XSERVER_DDB # PF12 gets you into DDB when X is running
#options XSERVER # X server support
# wscons
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
# "opms" should not be enabled together with "pms" or "pmsi"
#pms* at pckbc? # PS/2 mouse for wsmouse
#pmsi* at pckbc? # PS/2 "Intelli"mouse for wsmouse
#opms* at pckbc? # backwards compatible PS/2 mouse
#vga0 at isa?
vga* at pci? dev ? function ?
#pcdisplay0 at isa? # CGA, MDA, EGA, HGA
wsdisplay* at vga? console ?
#wsdisplay* at pcdisplay? console ?
wskbd* at pckbd? console ?
#wsmouse* at pms? mux 0
#wsmouse* at pmsi? mux 0
pcppi0 at isa?
sysbeep0 at pcppi?
# Serial Devices
# PCI serial interfaces
#com* at puc? port ? # 16x50s on "universal" comm boards
#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
#cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards
# ISA Plug-and-Play serial interfaces
#com* at isapnp? # Modems and serial boards
# PCMCIA serial interfaces
#com* at pcmcia? function ? # Modems and serial cards
#pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
#com* at pcmcom? slave ? # ...and the slave devices
# CardBus serial interfaces
#com* at cardbus? function ? # Modems and serial cards
# ISA serial interfaces
#options COM_HAYESP # adds Hayes ESP serial board support
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
com1 at isa? port 0x2f8 irq 3
#com2 at isa? port 0x3e8 irq 5
#com3 at isa? port 0x2e8 irq 9
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
#com* at ast? slave ?
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016)
#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016
#com* at boca? slave ?
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
#com* at tcom? slave ?
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
#com* at rtfps? slave ?
#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards
#addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S
#com* at addcom? slave ?
# Parallel Printer Interfaces
# PCI parallel printer interfaces
#lpt* at puc? port ? # || ports on "universal" comm boards
# ISA parallel printer interfaces
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
#lpt1 at isa? port 0x278
#lpt2 at isa? port 0x3bc
# LM7[89] and compatible hardware monitors
#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310
# VIA VT82C686A hardware monitor
#viapm* at pci? dev ? function ?
#viaenv* at viapm?
# SCSI Controllers and Devices
# PCI SCSI controllers
#adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
#bha* at pci? dev ? function ? # BusLogic 9xx SCSI
#dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
#isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel
#ncr* at pci? dev ? function ? # NCR 53c8xx SCSI (old driver)
#siop* at pci? dev ? function ? # Symbios 53c8xx SCSI
#pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
# EISA SCSI controllers
#ahb* at eisa? slot ? # Adaptec 174[02] SCSI
#ahc* at eisa? slot ? # Adaptec 274x, aic7770 SCSI
#bha* at eisa? slot ? # BusLogic 7xx SCSI
#dpt* at eisa? slot ? # DPT EATA SCSI
#uha* at eisa? slot ? # UltraStor 24f SCSI
# PCMCIA SCSI controllers
#aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
#esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI
# ISA Plug-and-Play SCSI controllers
#aha* at isapnp? # Adaptec AHA-154[02
#aic* at isapnp? # Adaptec AHA-1520B
# ISA SCSI controllers
#adv0 at isa? port ? irq ? drq ? # AdvanSys APB-514[02]
#aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI
#aha1 at isa? port 0x334 irq ? drq ?
#ahc0 at isa? port ? irq ? # Adaptec 284x SCSI
#aic0 at isa? port 0x340 irq 11 # Adaptec 152[02] SCSI
#bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI
#bha1 at isa? port 0x334 irq ? drq ?
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0 at isa? port 0x170 irq ? drq ? # DPT SmartCache/SmartRAID
#nca0 at isa? port 0x360 irq 15 # Port-mapped NCR 53C80 contoller
#nca1 at isa? iomem 0xd8000 irq 5 # Memory-mapped controller (T128, etc.)
#sea0 at isa? iomem 0xc8000 irq 5 # Seagate/Future Domain SCSI
#uha0 at isa? port 0x330 irq ? drq ? # UltraStor [13]4f SCSI
#uha1 at isa? port 0x340 irq ? drq ?
#wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 controllers
#wds1 at isa? port 0x358 irq 11 drq 5
# CardBus SCSI cards
#ahc* at cardbus? dev ? function ? # Adaptec ADP-1480
# SCSI bus support
#scsibus* at adv?
#scsibus* at adw?
#scsibus* at aha?
#scsibus* at ahb?
scsibus* at ahc?
#scsibus* at aic?
#scsibus* at bha?
#scsibus* at dpt?
#scsibus* at esp?
#scsibus* at isp?
##scsibus* at nca?
#scsibus* at ncr?
#scsibus* at pcscp?
#scsibus* at sea?
#scsibus* at siop?
#scsibus* at uha?
#scsibus* at wds?
# SCSI devices
sd* at scsibus? target ? lun ? # SCSI disk drives
st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
#ch* at scsibus? target ? lun ? # SCSI autochangers
#ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
#ss* at scsibus? target ? lun ? # SCSI scanners
#uk* at scsibus? target ? lun ? # SCSI unknown
# RAID controllers and devices
#cac* at pci? dev ? function ? # Compaq array controller
#ca* at cac? unit ? # Compaq array disk device
# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000
# ISA Plug-and-Play IDE controllers
#wdc* at isapnp?
# PCMCIA IDE controllers
#wdc* at pcmcia? function ?
# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
#wdc0 at isa? port 0x1f0 irq 14 flags 0x00
#wdc1 at isa? port 0x170 irq 15 flags 0x00
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
#wd* at wdc? channel ? drive ? flags 0x0000
wd* at pciide? channel ? drive ? flags 0x0000
# ATAPI bus support
#atapibus* at wdc? channel ?
atapibus* at pciide? channel ?
# ATAPI devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# Miscellaneous mass storage devices
# ISA floppy
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd* at fdc? drive ? # the drives themselves
# some machines need you to do this instead of fd*
#fd0 at fdc0 drive 0
# ISA CD-ROM devices
#mcd0 at isa? port 0x300 irq 10 # Mitsumi CD-ROM drives
# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0 at isa? port 0x308 irq 5 drq 1 # Archive and Wangtek QIC tape drives
# Network Interfaces
# PCI network interfaces
#de* at pci? dev ? function ? # DEC 21x4x-based Ethernet
#en* at pci? dev ? function ? # ENI/Adaptec ATM
#ep* at pci? dev ? function ? # 3Com 3c59x
ex* at pci? dev ? function ? # 3Com 90x[B]
#epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
#esh* at pci? dev ? function ? # Essential HIPPI card
#fpa* at pci? dev ? function ? # DEC DEFPA FDDI
#fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
#le* at pci? dev ? function ? # PCnet-PCI Ethernet
#lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
#ne* at pci? dev ? function ? # NE2000-compatible Ethernet
#ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
#rtk* at pci? dev ? function ? # Realtek 8129/8139
#sip* at pci? dev ? function ? # SiS 900 Ethernet
#ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet
#tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
#tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet
#options TLP_MATCH_21040
#options TLP_MATCH_21041
#options TLP_MATCH_21140
#options TLP_MATCH_21142
#vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
# EISA network interfaces
#ep* at eisa? slot ? # 3Com 3c579 Ethernet
#fea* at eisa? slot ? # DEC DEFEA FDDI
#tlp* at eisa? slot ? # DEC DE-425 Ethernet
# ISA Plug-and-Play network interfaces
#ep* at isapnp? # 3Com 3c509 Ethernet
#ne* at isapnp? # NE2000-compatible Ethernet
#tr* at isapnp? # IBM/3COM TROPIC Token-Ring
# PCMCIA network interfaces
#an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11)
#awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
#cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer
#ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
#mbe* at pcmcia? function ? # MB8696x based Ethernet
#ne* at pcmcia? function ? # NE2000-compatible Ethernet
#ray* at pcmcia? function ? # Raytheon Raylink (802.11)
#sm* at pcmcia? function ? # Megahertz Ethernet
#wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11)
#xi* at pcmcia? function ? # Xircom CreditCard Ethernet
#mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
#com* at mhzc?
#sm* at mhzc?
# ISA network interfaces
#ate0 at isa? port 0x2a0 irq ? # AT1700
#cs0 at isa? port 0x300 iomem ? irq ? drq ? # CS8900 Ethernet
#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
#eg0 at isa? port 0x280 irq 9 # 3C505 ethernet cards
#el0 at isa? port 0x300 irq 9 # 3C501 ethernet cards
#ep* at isa? port ? irq ? # 3C509 ethernet cards
#ef0 at isa? port 0x360 iomem 0xd0000 irq 7 # 3C507
#ai0 at isa? port 0x360 iomem 0xd0000 irq 7 # StarLAN
#fmv0 at isa? port 0x2a0 irq ? # FMV-180 series
#ix0 at isa? port 0x300 irq 10 # EtherExpress/16
#iy0 at isa? port 0x360 irq ? # EtherExpress PRO 10 ISA
#lc0 at isa? port 0x320 iomem ? irq ? # DEC EtherWORKS III (LEMAC)
#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5 # DEPCA
#le* at depca?
#nele0 at isa? port 0x320 irq 9 drq 7 # NE2100
#le* at nele?
#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1 # Riscom/N2 sync serial
#bicc0 at isa? port 0x320 irq 10 drq 7 # BICC IsoLan
#le* at bicc?
#ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
#ne1 at isa? port 0x300 irq 10
#sm0 at isa? port 0x300 irq 10 # SMC91C9x Ethernet
#tr0 at isa? port 0xa20 iomem 0xd8000 irq ? # IBM TROPIC based Token-Ring
#tr1 at isa? port 0xa24 iomem 0xd0000 irq ? # IBM TROPIC based Token-Ring
#tr* at isa? port ? irq ? # 3COM TROPIC based Token-Ring
#we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
#we1 at isa? port 0x300 iomem 0xcc000 irq 10
# CardBus network cards
#ex* at cardbus? dev ? function ? # 3Com 3C575TX
#fxp* at cardbus? dev ? function ? # Intel i8255x
#rtk* at cardbus? dev ? function ? # Realtek 8129/8139
#tlp* at cardbus? dev ? function ? # DECchip 21143
# MII/PHY support
#dmphy* at mii? phy ? # Davicom DM9101 PHYs
exphy* at mii? phy ? # 3Com internal PHYs
#icsphy* at mii? phy ? # Integrated Circuit Systems ICS1890
#inphy* at mii? phy ? # Intel 82555 PHYs
#iophy* at mii? phy ? # Intel 82553 PHYs
#lxtphy* at mii? phy ? # Level One LXT-970 PHYs
#nsphy* at mii? phy ? # NS83840 PHYs
#nsphyter* at mii? phy ? # NS83843 PHYs
#qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
#sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
#tlphy* at mii? phy ? # ThunderLAN PHYs
#tqphy* at mii? phy ? # TDK Semiconductor PHYs
#ukphy* at mii? phy ? # generic unknown PHYs
# USB Controller and Devices
# PCI USB controllers
#ohci* at pci? dev ? function ? # Open Host Controller
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
# CardBus USB controllers
#ohci* at cardbus? dev ? function ? # Open Host Controller
# USB bus support
#usb* at ohci?
usb* at uhci?
# USB Hubs
uhub* at usb?
#uhub* at uhub? port ? configuration ? interface ?
# USB Mice
#ums* at uhub? port ? configuration ? interface ?
#wsmouse* at ums? mux 0
# USB Keyboards
#ukbd* at uhub? port ? configuration ? interface ?
#wskbd* at ukbd? console ? mux 1
# USB Generic HID devices
#uhid* at uhub? port ? configuration ? interface ?
# USB Printer
#ulpt* at uhub? port ? configuration ? interface ?
# USB Modem
#umodem* at uhub? port ? configuration ?
#ucom* at umodem?
# USB Mass Storage
#umass* at uhub? port ? configuration ? interface ?
#atapibus* at umass? channel ?
#scsibus* at umass? channel ?
# USB audio
#uaudio* at uhub? port ? configuration ?
# USB Ethernet adapters
#aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
#cue* at uhub? port ? # CATC USB-EL1201A based adapters
#kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
# Prolofic PL2301/PL2302 host-to-host adapter
#upl* at uhub? port ?
# Serial adapters
# FTDI FT8U100AX serial adapter
#uftdi* at uhub? port ?
#ucom* at uftdi? portno ?
# Diamond Multimedia Rio 500
#urio* at uhub? port ?
# USB Handspring Visor
#uvisor* at uhub? port ?
#ucom* at uvisor?
# USB Generic driver
#ugen* at uhub? port ?
# Audio Devices
# PCI audio devices
#auvia* at pci? dev ? function ? # VIA VT82C686A integrated AC'97 Audio
#clcs* at pci? dev ? function ? # Cirrus Logic CS4280
#clct* at pci? dev ? function ? # Cirrus Logic CS4281
#cmpci* at pci? dev ? function ? # C-Media CMI8338/8738
#eap* at pci? dev ? function ? # Ensoniq AudioPCI
#esm* at pci? dev ? function ? # ESS Maestro-1/2/2e PCI Audio Accelerator
#eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
#fms* at pci? dev ? function ? # Forte Media FM801
#neo* at pci? dev ? function ? # NeoMagic 256 AC'97 Audio
#sv* at pci? dev ? function ? # S3 SonicVibes
#yds* at pci? dev ? function ? # Yamaha DS-1 PCI Audio
# ISA Plug-and-Play audio devices
#ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio
#guspnp* at isapnp? # Gravis Ultra Sound PnP audio
#sb* at isapnp? # SoundBlaster-compatible audio
#wss* at isapnp? # Windows Sound System
#ym* at isapnp? # Yamaha OPL3-SA3 audio
# ISA audio devices
# the "aria" probe might give false hits
#aria0 at isa? port 0x290 irq 10 # Aria
#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX
#gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound
#pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum
#pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System
#sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver
#sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster
#wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System
#cms0 at isa? port 0x220 # Creative Music System
# OPL[23] FM synthesizers
#opl0 at isa? port 0x388 # use only if not attached to sound card
#opl* at eso?
#opl* at ess?
#opl* at fms?
#opl* at sb?
#opl* at sv?
#opl* at wss?
#opl* at yds?
#opl* at ym?
# Audio support
#audio* at aria?
#audio* at auvia?
#audio* at clcs?
#audio* at clct?
#audio* at cmpci?
#audio* at eap?
#audio* at esm?
#audio* at eso?
#audio* at ess?
#audio* at fms?
#audio* at gus?
#audio* at guspnp?
#audio* at neo?
#audio* at pas?
#audio* at sb?
#audio* at sp?
#audio* at sv?
#audio* at uaudio?
#audio* at wss?
#audio* at yds?
#audio* at ym?
# MPU 401 UARTs
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
#mpu* at eso?
#mpu* at fms?
#mpu* at sb?
#mpu* at yds?
#mpu* at ym?
# MIDI support
#midi* at clcs? # Cirrus Logic CS4280 MIDI port
#midi* at clct? # Cirrus Logic CS4281 MIDI port
#midi* at cms? # Creative Music System
#midi* at eap? # 137[01] MIDI port
#midi* at mpu? # MPU 401
#midi* at opl? # OPL FM synth
midi* at pcppi? # MIDI interface to the PC speaker
#midi* at sb? # SB1 MIDI port
# The spkr driver provides a simple tone interface to the built in speaker.
#spkr0 at pcppi? # PC speaker
# TV cards
# Brooktree 848/849/878/879 based TV cards
#bktr* at pci? dev ? function ?
# Mice
# ISA busmice
#lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
#lms1 at isa? port 0x238 irq 5
#mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
#mms1 at isa? port 0x238 irq 5
#wsmouse* at lms? mux 0
#wsmouse* at mms? mux 0
# backwards compatible versions
#olms0 at isa? port 0x23c irq 5 # Logitech bus mouse
#olms1 at isa? port 0x238 irq 5
#omms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
#omms1 at isa? port 0x238 irq 5
#opms0 at pc? irq 12 # PS/2 auxiliary port mouse
# Joysticks
# ISA Plug-and-Play joysticks
#joy* at isapnp? # Game ports (usually on audio cards)
# PCI joysticks
#joy* at pci? # Game ports (usually on audio cards)
# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
# Miscellaneous Devices
# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1
# Pull in optional local configuration
include "arch/i386/conf/GENERIC.local"
# Pseudo-Devices
# disk/mass storage pseudo-devices
#pseudo-device ccd 4 # concatenated/striped disk devices
#pseudo-device raid 4 # RAIDframe disk driver
#options RAID_AUTOCONFIG # auto-configuration of RAID components
pseudo-device md 1 # memory disk device (ramdisk)
#pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
#pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
#pseudo-device ppp 2 # Point-to-Point Protocol
#pseudo-device sl 2 # Serial Line IP
#pseudo-device strip 2 # Starmode Radio IP (Metricom)
#pseudo-device tun 2 # network tunneling over tty
#pseudo-device gre 2 # generic L3 over IP tunnel
#pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003)
#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
#pseudo-device vlan # IEEE 802.1q encapsulation
# miscellaneous pseudo-devices
pseudo-device pty 64 # pseudo-terminals
#pseudo-device tb 1 # tablet line discipline
#pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
# a pseudo device needed for Coda # also needs CODA (above)
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
# mouse & keyboard multiplexor pseudo-devices
pseudo-device wsmux 2