This is a multi-part message in MIME format.
--------------5B581ECE0CE524FEFD0A7B8F
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hi,
Modified scsiconf.c, new kernel, dmesg for camera included below , any
attemp to mount with:
mount -t  msdos /dev/sd3c /mnt , gives error' mount_msdos: /dev/sd3c on
/mnt: Invalid argument'.
Am i using the 'mount' command incorrectly?
-Mel


--------------5B581ECE0CE524FEFD0A7B8F
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.2"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.2"

umass0 at uhub0 port 1 configuration 1 interface 0
umass0: OLYMPUS C-200Z/D-510Z, rev 1.10/1.00, addr 2
umass0: using SCSI over BBB
scsibus2 at umass0: 2 targets, 1 luns per target
scsibus2: waiting 2 seconds for devices to settle...
sd3 at scsibus2 target 1 lun 0: <OLYMPUS, D-510ZOOM, 1.00> SCSI2 0/direct removable
sd3: could not mode sense (4/5); using fictitious geometry
sd3: 8000 KB, 7 cyl, 64 head, 32 sec, 512 bytes/sect x 16000 sectors
sd3: could not mode sense (4/5); using fictitious geometry
sd3: no disk label

--------------5B581ECE0CE524FEFD0A7B8F
Content-Type: text/plain; charset=us-ascii;
 name="disklabel.sd3"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="disklabel.sd3"

# /dev/rsd3c:
type: SCSI
disk: D-510ZOOM
label: fictitious
flags:
bytes/sector: 512
sectors/track: 32
tracks/cylinder: 64
sectors/cylinder: 2048
cylinders: 7
total sectors: 16000
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0		# microseconds
track-to-track seek: 0	# microseconds
drivedata: 0 

3 partitions:
#        size   offset     fstype   [fsize bsize   cpg]
  c:    16000        0     unused        0     0         # (Cyl.    0 - 7*)

--------------5B581ECE0CE524FEFD0A7B8F--