Subject: Re: mass storage usb camera
To: Nathan J. Williams <nathanw@wasabisystems.com>
From: mel kravitz <melk@switchpwr.com>
List: netbsd-users
Date: 12/15/2001 02:27:39
This is a multi-part message in MIME format.
--------------021DF02DABCFC0421D43D4C1
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Thanks, i will try 1.173  and a new kernel on my alpha433au as soon as available
from ftp.netbsd.org-
"Nathan J. Williams" wrote:

> I think I *just* fixed this, or a close relative of your problem.
> What does your device report itself to be? Mine is a D-100 camera, and
> reports itself as:
>
> umass0 at uhub1 port 1 configuration 1 interface 0
> umass0: OLYMPUS C-1, rev 1.10/10.62, addr 2
> umass0: using SCSI over BBB
> scsibus0 at umass0: 2 targets, 1 luns per target
> scsibus0: waiting 2 seconds for devices to settle...
> sd0 at scsibus0 target 1 lun 0: <OLYMPUS, C-1, 1062> SCSI2 0/direct removable
> sd0: mode sense (4) returned nonsense; using fictitious geometry
> sd0: 16000 KB, 15 cyl, 64 head, 32 sec, 512 bytes/sect x 32000 sectors
>
> Try a new kernel with rev 1.173 of dev/scsipi/scsipiconf.c.
>

My dmesg on this box  is shown below, as well as disklabel(?) no msdos partion?
-Mel






--------------021DF02DABCFC0421D43D4C1
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.2"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.2"

 
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: OLYMPUS C-200Z/D-510Z, rev 1.10/1.00, addr 2
umass0: using SCSI over BBB-P
scsibus2 at umass0: 2 targets, 1 luns per target
scsibus2: waiting 2 seconds for devices to settle...
sd3 at scsibus2 target 1 lun 0: <OLYMPUS, D-510ZOOM, 1.00> SCSI2 0/direct removable
sd3: could not mode sense (4/5); using fictitious geometry
sd3: 8000 KB, 7 cyl, 64 head, 32 sec, 512 bytes/sect x 16000 sectors

--------------021DF02DABCFC0421D43D4C1
Content-Type: text/plain; charset=us-ascii;
 name="disklabel.sd3"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="disklabel.sd3"

# /dev/rsd3c:
type: SCSI
disk: D-510ZOOM
label: fictitious
flags:
bytes/sector: 512
sectors/track: 32
tracks/cylinder: 64
sectors/cylinder: 2048
cylinders: 7
total sectors: 16000
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0		# microseconds
track-to-track seek: 0	# microseconds
drivedata: 0 

3 partitions:
#        size   offset     fstype   [fsize bsize   cpg]
  c:    16000        0     unused        0     0         # (Cyl.    0 - 7*)
  
--------------021DF02DABCFC0421D43D4C1--