> I have the following in my /etc/rc.local:
> 
>     mixerctl -w outputs.master=111,111
with this wss i did NOT have outputs.master!!!!!

now i plugged SB AWE 64 Gold works fine (and what sound quality :) but i
would like to know how to use wss/mad16 cards


>     mixerctl -w outputs.master.mute=off
>     mixerctl -w inputs.cd.mute=off
> 
> I needed to set the outputs.master explicitly as my card was
> creating noise at maximum.
> 
> On Tue, 30 Jan 2001 wojtek@wojtek.from.pl wrote:
> 
> > now i have GOOD (tested) CS-4235 based isapnp soundcard
> > 
> > works ok but sound are very very soft even when dac output is set to
> > maximum. speakers are connected to good port (SPK-out).
> > 
> > inputs.mic=0,0
> > inputs.mic.mute=off
> > inputs.cd=0,0
> > inputs.cd.mute=off
> > inputs.dac=255,255
> > inputs.dac.mute=off
> > record.record=0,0
> > record.record.source=mic
> > monitor.monitor=0
> > monitor.monitor.mute=on
> > 
> > is it ok to not have setting like output.master ? card is said to have
> > "hardware master volume control" 
> > 
> > it starts like that:
> > 
> > isapnp0: read port 0x203
> > wss0 at isapnp0 port 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0
> > wss0: Crystal Codec WSS/SB: CS4236B compatible
> > audio0 at wss0: full duplex, mmap
> > opl0 at wss0: model OPL3
> > midi0 at opl0: WSS Yamaha OPL3
> > joy0 at isapnp0 port 0x200/8
> > joy0: Crystal Codec GAME
> > joy0: joystick not connected
> > isapnp0: <Crystal Codec, CSC0010, , CTRL> port 0x120/8 not configured
> >                          ^^^^^^^^^^^^^^^^
> > isapnp0: <Crystal Codec, CSC0003, , MPU> port 0x330/2 irq 9 not configured
> > 
> > 
> > 
> 
> -- 
> "Maybe this world is another planet's Hell." - Aldous Huxley
>