Subject: Acer CRW
To: None <>
From: Emre <>
List: netbsd-users
Date: 12/15/1999 21:29:48
I should have posted this to port-i386@ or tech-misc@ but I figured this
list is the most active one.

I have a Acer 6X CD Rewriter, it's IDE.  Do these work yet?  I couldn't
find anything on the i386 hardware support list so I thought I'd ask here. 
I installed cdrecord, but it looks like it only works with SCSI drives.
Here is my dmesg:

NetBSD 1.4.1 (GENERIC) #1: Tue Aug 10 00:03:09 MEST 1999
cpu0: family 5 model 6 step 2
cpu0: AMD K6 (586-class)
real mem  = 66715648
avail mem = 58339328
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C597 (Apollo VP3) Host-PCI Bridge (rev. 0x04)
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo
ev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o enabled, memory enabled
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge (rev. 0x47)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C586A IDE
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 1: <CD-ROM CDU311, , 3.0i> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 3, DMA mode 1
wd0 at pciide0 channel 0 drive 0: <Maxtor 90845D4>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 8063MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 16514064 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
pciide0: secondary channel configured to compatibility mode
atapibus1 at pciide0 channel 1
cd1 at atapibus1 drive 0: <CRW6206A, , 1.2A> type 5 cdrom removable
cd1: 32-bits data port
cd1: drive supports PIO mode 4, DMA mode 2
sd0 at atapibus1 drive 1: <IOMEGA  ZIP 100       ATAPI, , 13.A> type 0
direct removable
sd0: 96MB, 96 cyl, 64 head, 32 sec, 512 bytes/sect x 196608 sectors
sd0: 32-bits data port
pciide0: secondary channel interrupting at irq 15
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
cd0(pciide0:0:1): using PIO mode 3, DMA mode 1 (using DMA data transfers)
cd1(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
sd0(pciide0:1:1): using PIO mode 3
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller
(rev. 0x
uhci0: interrupting at irq 11
uhci0: USB version 1.0
usb0 at uhci0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
VIA Technologies VT82C586 (Apollo VP) Power Management Controller
bridge, revision 0x10) at pci0 dev 7 function 3 not configured
pcscp0 at pci0 dev 10 function 0
pcscp0: interrupting at irq 10
pcscp0: AM53C974, 40MHz, SCSI ID 7
scsibus0 at pcscp0: 8 targets, 8 luns per target
probe(pcscp0:0:0): max sync rate 10.00Mb/s
sd1 at scsibus0 targ 0 lun 0: <SEAGATE, ST51080N, 0913> SCSI2 0/direct
sd1: 1030MB, 4826 cyl, 4 head, 109 sec, 512 bytes/sect x 2109840 sectors
vga1 at pci0 dev 12 function 0: S3 Trio32/64 (rev. 0x00)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt1 at isa0 port 0x278-0x27b: polled
sb0 at isa0 port 0x220-0x237 irq 5 drq 1 drq2 5: dsp v4.13
audio0 at sb0: full duplex
opl0 at sb0: model OPL3
midi0 at opl0: <SB Yamaha OPL3>
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opmsprobe: command error
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x207
isapnp0: card 1 violates PnP spec; byte 2
isapnp0: <, D@@0000, @BD2F00, > port 0x6e69/105,0x0 not configured
isapnp0: <, DHU228B, PNP80D7, > not configured
biomask cc40 netmask cc40 ttymask cc42
wscons: wskbd0 glued to wsdisplay0 (console)
sd0: disk label corrupted
sd1: no disk label
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
Emre Yildirim
DH/DSS KeyID: 0xA007E75C | RSA KeyID: 0xFD5FD2C7