I puchased an ActionTec  model IS560LH internal  v.90 Modem.
Upon initial startup my bios says:

CARD-01 Lt Win Modem

( I have the PnP auto turned on in my Bios)

Upon examining my dmesg output  (included below)
its not clear that NetBSD 1.3.1  knows  the modem is present.

What is the process to get  NetBSD to use this modem?

Does anybody have a set of ppp scripts to get it to use 56kb?

I have search the FAQs and have failed to find pointers.

Thanks for your help.

Bill

-----------------------------------------------------
dmesg output
------------------------------------------------------
NetBSD 1.3_ALPHA (GENERICX) #2: Sat Nov 29 11:01:45 PST 1997
    hodges@hodges.oz.net:/usr/src/sys/arch/i386/compile/GENERICX
cpu0: family 6 model 0 step 0
cpu0: Cyrix M2 (686-class)
real mem  = 66711552
avail mem = 59314176
using 839 buffers containing 3436544 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
VIA Technologies product 0x0585 (host bridge, revision 0x23) at pci0 dev
0 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge (rev. 0x25)
VIA Technologies product 0x0571 (IDE mass storage, interface 0x8a,
revision 0x06) at pci0 dev 7 function 1 not configured
ATI Technologies Mach64 GX (VGA display, revision 0x01) at pci0 dev 8
function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
mcd0 at isa0 port 0x300-0x303 irq 11: model FX001D
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <ST32140A>
wd0: 2015MB, 4095 cyl, 16 head, 63 sec, 512 bytes/sec
wd0: using 16-sector 16-bit pio transfers, lba addressing
wd1 at wdc0 drive 1: <WDC AC31600H>
wd1: 1549MB, 3148 cyl, 16 head, 63 sec, 512 bytes/sec
wd1: using 16-sector 16-bit pio transfers, lba addressing
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
wd2 at wdc1 drive 0: <WDC AC2540H>
wd2: 515MB, 1048 cyl, 16 head, 63 sec, 512 bytes/sec
wd2: using 16-sector 16-bit pio transfers, lba addressing
sb0 at isa0 port 0x220-0x22f irq 7 drq 1: dsp v2.01
audio0 at sb0
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pms0 at pc0 irq 12
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask c840 netmask c840 ttymask d8c2
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs