Subject: Re: Recent Status (was: HPPA Port Interest.)
To: Eric Schnoebelen <firstname.lastname@example.org>
From: Michael Shalayeff <email@example.com>
Date: 01/08/2000 00:49:49
1. to build cross-tools using some checked out sources, make sure your
current running system is built from those same sorces.
in particular your libiberty is out of sync here.
2. to setup a serial console that way it would require having a monitor
anyway, so why not use it? (:
once you mentioned netbsd/hppa is it available anywhere?
Making, drinking tea and reading an opus magnum from Eric Schnoebelen:
> Michael Shalayeff writes:
> - Making, drinking tea and reading an opus magnum from Eric Schnoebelen:
> - > David Brownlee writes:
> - > - On Wed, 29 Dec 1999, Eric Schnoebelen wrote:
> - > - Any status updates from people out there - anyone willing to
> - > - manage the pge that lists status and info?
> - >
> - > Well, I'm probably not up to a page, but I can provide
> - > this status update from here:
> - >
> - > I noticed that Mickey on the OpenBSD project updated the
> - > OpenBSD tree a bit. I _still_ wasn't able to get a cross
> - > compiler to build on my OpenBSD/sparc system, so I haven't gone
> - > too much farther down that path..
> - cross-tools builds just fine on i386 and sparc.
> - can you describe your problems before stating it does not build?
> - i can confirm that it builds not only on my machine.
> Executing the following command:
> sudo make TARGET=hppa cross-tools
> left me with the following errors:
> gcc -DCROSS_COMPILE -DIN_GCC -DHAIFA -g -DHAVE_CONFIG_H -o cc1 toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o real.o dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o profile.o insn-attrtab.o pa.o getpwd.o convert.o mbchar.o dyn-string.o graph.o sbitmap.o resource.o hash.o c-parse.o c-lang.o c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o obstack.o -liberty
> /home/wylbur/eric/work/OpenBSD/src/gnu/egcs/gcc/cse.c:856: Undefined symbol `_find_hash_table_entry' referenced from text segment
> /home/wylbur/eric/work/OpenBSD/src/gnu/egcs/gcc/cse.c:921: Undefined symbol `_empty_hash_table' referenced from text segment
> /home/wylbur/eric/work/OpenBSD/src/gnu/egcs/gcc/cse.c:932: Undefined symbol `_create_hash_table' referenced from text segment
> collect2: ld returned 1 exit status
> *** Error code 1
> Stop in /usr/cross/hppa/usr/obj/gnu/egcs/gcc.
> *** Error code 1
> Digging into OpenBSD's compiler tree was a bit more than I was up
> Sunday afternoon (when I recieve the above error.)
> I'm updating my OpenBSD CVS tree as I type, and will attempt
> another cross build just as soon as the update is complete.
> - > I've tried to boot Mickey's latest OpenBSD/hppa kernel
> - > on one my 720, with no luck. I haven't tried to boot anything
> - > on the `spare' 712, as I haven't gotten it rigged for a serial
> - > console yet.
> - 720 is stated as _unsupported_ until someone w/ the box
> - actually work on it. so, whom have you gotten surprised?
> I wasn't terribly suprised. It hasn't worked before, and
> I didn't really expect it to work this time, but I was taking a
> chance that perhaps something unrelated caused a change in that
> status. Once I can get the cross compile environment going, I'll
> go at getting the 720 supported for both OpenBSD and NetBSD..
> - fyi, 712 does not support serial console.
> Actually, it does, although not in a natural, intuitive way.
> Inside HP, they have/had a large number of them set up headless
> for various purposes. However, it is not a configuration
> supported outside of HP.
> The magic, gleaned from the firstname.lastname@example.org
> list is:
> power up the 712
> abort the autoboot (press escape)
> at the BOOT_ADMIN> prompt, enter
> `boot pri isl'
> at the ISL> prompt, type
> `conspath 2/0/4.0x283' (for serial)
> at the ISL> prompt, type
> to verify the console path is:
> `(hex) 2/0/4.2220.127.116.11.0.0'
> If required, retype the `conspath' command, and reverify
> until it is correct.
> Connect a terminal to the system.
> power cycle the system to bring it up on a serial
> Disclaimers: This is _not_ a supported configuration by HP end
> users. If you mess up the `conspath' command, and let the
> system reset, you have buggered your system into a state where
> only a `dagger' board can reset it. `dagger' boards are
> available internally to HP, for their use..
> The URL of the message in the parisc-linux archive is:
> I'm going to set one of my 712's to run off a serial
> console, at least for a while. The other (my primary X display)
> will continue using the standard graphical display.. :-)
> Eric Schnoebelen email@example.com http://www.cirr.com
> Where subtlety fails us we must simply make do with cream pies.
paranoic mickey (my employers have changed but, the name has remained)